Checking the autocollimator readings

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 40

  • @oxtoolco
    @oxtoolco Рік тому +7

    Excellent videography! I can certainly appreciate how difficult this is to film and edit.
    All the best,
    Tom

    • @gena_bazarko
      @gena_bazarko  Рік тому +3

      Hello Tom! I am very pleased to see your comment on my channel, especially since it is friendly. I watched a lot of your videos and learned a lot of new and useful things. I'm very glad to meet you. Thank you for your UA-cam channel. With great respect, Gennady.

  • @gyrogearloose1345
    @gyrogearloose1345 День тому

    Another Great Video! Where you confirm the accuracy of your instruments and verify the performance of several auto-collimator instruments. I'm very happy you got the digital camera to shoot through the eyepiece of the instrument. I noticed your were using the video to announce and note the micron comparator setting. Then you made the composite video showing the micron indicator alongside the auto-collimator reticle. Very very good!
    I went to subscribe to your Patreon - unfortunately found the cost outside my tight budget. Sorry about that.
    Please allow me to help with any further camera problems you may run into. Wishing you all the best.

  • @mceajc
    @mceajc Рік тому +4

    If you are looking for an opinion, this generated voice choice is the best so far. The content is as interesting as ever, and I am excited to see what you will do next!

    • @gena_bazarko
      @gena_bazarko  Рік тому

      The next video will transform the same stand, it will be supplemented with new features. A straight edge measuring 1070x60x120mm will be installed on it. With an accurate bubble level, I can control a surface of 1070x60mm, due to the special design of this stand, with an accuracy of less than one micron over the entire surface. Thus, as a result of control and surface treatment, the exact plane of this straight edge 1070x60 mm will be produced. Submicron precision is implied. I think it will be very interesting.

  • @piotr0x07da
    @piotr0x07da Рік тому +3

    In my opinion your original voice is way better than this auto generated. Thank you for such highly valuable content and lots of knowledge.

  • @kostyadziuba8662
    @kostyadziuba8662 Рік тому +4

    Дякую за відео. Дуже цікаво спостерігати за вашими дослідами.

  • @stevenhavener7327
    @stevenhavener7327 Рік тому +3

    Thank you for another very instructional video ! love the suspension system to keep your movement from influencing the readings !!! best regards Steve

  • @inzen86
    @inzen86 Рік тому +3

    Thanks for sharing as always. The voice is better indeed :)

  • @MrPickles3rd
    @MrPickles3rd Рік тому +1

    wow! Keep doing what you are doing! Do what you want. Do what you love! This, you, please are amassing.

  • @IrenESorius
    @IrenESorius Рік тому +6

    Hello Maestro Bazarko.
    Thank you ever so much for your time and work it takes, to share all this information with us all,, 💖🙏💖
    I am eagerly looking forward for every new episode,, ☕😋🍰

  • @wktodd
    @wktodd Рік тому +4

    Much better artificial voice Gena :-) I guessed the alcohol was not for consumption (too small ;-)) Great pictures :-)

  • @MsFactnotfiction
    @MsFactnotfiction Рік тому

    I really appreciate your videos. Thank you very much for your efforts.

  • @wowcoolm860
    @wowcoolm860 11 місяців тому +1

    Love your videos...fantastic.
    One of your previous autocollimator videos mentioned that you sell autocollimators. Do you still have any for sale as I am trying to find one? How do I contact you regarding a purchase?

  • @ianday38
    @ianday38 Рік тому +1

    I was very worried for your right foot at 06:00
    I hope that chair is engineered to your usual standards? 😂

  • @ellarickey6925
    @ellarickey6925 Рік тому +2

    This man is very intelligent

  • @ivanishyn
    @ivanishyn Рік тому +2

    Fantastic job

  • @AlanSummers-r7w
    @AlanSummers-r7w 6 місяців тому

    Hi - you
    Mentioned you have autocollimator mirrors for sale , do you still have them ? Thanks

    • @gena_bazarko
      @gena_bazarko  6 місяців тому

      Hello! Yes, I have mirrors for an autocollimator that I intend to sell. Write to me by email. In addition, there are autocollimators, 589 nanometer laboratory lamps, flat interference glasses and the like. den.gennady19@gmail.com

  • @richardhutchinson4016
    @richardhutchinson4016 Рік тому

    Thanks for another informative video

  • @user-ou2fi8xt8w
    @user-ou2fi8xt8w Рік тому +2

    Рад что ты жив, здоров и на гражданке.

  • @monad_tcp
    @monad_tcp Рік тому +1

    I found the story funny that the soviet union had to bootstrap from the western society on precision tooling

    • @gena_bazarko
      @gena_bazarko  Рік тому +1

      Most likely, residents of Western, industrialized countries do not know how many samples of their industrial products were simply copied by Soviet industry, regardless of patent law. More precisely, almost the entire assortment was copied, with rare exceptions.

  • @zk6912
    @zk6912 2 місяці тому

    Hello,
    I like very much your videos. I have a comment about autocollimator resolution. I do not understand the rating of the autocollimators (ac.): you showed ac. with 0.5 arc second resolution and even with 0.2 arc second resolution. The ac. equation says that theoretically the smallest resolvable angular deviation is theta = D/(2*F), where D is a small distance in the focal plane (it can bee e.g. the line width of the reticle), F is the focal length of the ac. lens. But this calculation does not take into account the light diffraction. The angular resolution of an objective lens or mirror is given by theta = 1.22*lambda/D, where lambda is the wavelength of the light in microns, and D is the diameter of the optics in decimeters. Hence for a D=50mm lens the theoretical angular resolution limit for 550nm light is 1.35 arc second. Way beyond the resolution rating of the autocollimators you showed us. In your video around 12:30 we can see, that the microcator can indicate few micron changes in the alignment of the test bar and mirror, but this deviation can be barely seen on the autocollimator image.
    Best regards,
    Zsolt Kis

    • @gena_bazarko
      @gena_bazarko  2 місяці тому

      Hello! The autocollimator objective lens diameter is 0.2 arcseconds 60mm. The focal length is about 900mm. Can this additional information help you figure it out?

    • @zk6912
      @zk6912 2 місяці тому

      ​@@gena_bazarko Well, I can repeat now the above calculations with the true numbers. So the the ac. equation gives theta1 = D/(2*F) = 60/(900*2) = 0.002/(2*900) = 0.00000111111 radian, where I assumed that the reticle linewidth is 2 microns. This angle corresponds to 0.23 arcseconds, which is given in the spec. list of your ac. However, the optics limits this theoretical resolution due to diffraction. The diffraction equation gives theta2 = 1.22*lambda/D = 1.22*0.55E-3/60 = 0.0000111 Radians, which corresponds to 2.3 arcseconds. If we image now the 2 microns wide reticle line back to the focal plane of the 900mm focal length objective we obtain 0.01mm linewidth. This line broadening is due to the effect of diffraction at the edge of the finite size objective lens. One can do nothing about it. To get smaller linewidth in the image plane and better resolution one should increase the diameter of the objective lens. In your case one should use 5 times larger objective lens to achieve the theoretical resolution of the ac.

    • @gena_bazarko
      @gena_bazarko  2 місяці тому

      Thank you for the theoretical information you provided. I will try to understand this information, but at the moment I do not understand it in detail. I need to expand my knowledge of optics. But at the same time, the problem you mentioned is somehow solved. If you install a good camera on the autocollimator lens and display the image on the monitor, it will be possible to register even a smaller angular deviation than 0.2 arc seconds. Since now, when working with an autocollimator, I do not use additional devices and control measurements simply by eye, and my vision is no longer perfect due to my age, I can confidently say that with an autocollimator of 0.2 arc seconds, and this is its sensitivity determined by the manufacturer, I undoubtedly see, at a minimum, a deviation of 0.5 arc seconds. I would like to understand the theory of optics as well as you do).

    • @zk6912
      @zk6912 2 місяці тому

      @@gena_bazarko Helo,
      If you give an email address I can send you more detailed explanation. And yes, with the help of a camera and image processing you can get finer details than the resolution formula says.

    • @zk6912
      @zk6912 2 місяці тому +1

      I found your email address, so I am going to send you some more explanation and maybe documents or links to documents.

  • @Gersberms
    @Gersberms Рік тому

    This is very cool. I know nothing about optical instruments so it took me a while to understand what was going on. So the autocollimator is on the right, shining light to a mirror, and back again, measuring the angle of the mirror? And you're saying it can be used to measure the flatness of a large surface? Very interesting, it makes sense because you can't put a very large table on a granite slab to see if it's flat. Also, if you were manufacturing a granite table it needs to be measured. Very impressive resolution! I wish you the best of luck with your business and your channel.

    • @gena_bazarko
      @gena_bazarko  Рік тому +1

      This is true. The autocollimator measures the angle by which the position of the mirror plane has changed relative to the optical axis of the autocollimator with an accuracy sufficient to control surface plates or pairs of linear movement of machine tools (curvature of a plane or line up to one micron at a distance of a meter.

  • @liex7187
    @liex7187 Рік тому

    What kind of screw do you use for height adjustment? Motion seems to be very smooth and precise for 1 micron increments.

  • @Turnipko
    @Turnipko 3 місяці тому

    8:05 So its proof that without camera you can not detect even 1 arsec. In actual straightness measurement only by your eye you will not be able to check down to 1 arcsec. Error gona be more then 1 arcsec coz resolution of optics on is not great

  • @lohikarhu734
    @lohikarhu734 11 місяців тому

    how are you doing?
    i hope a better 2024 for UA
    and a good one for you, personally!

    • @gena_bazarko
      @gena_bazarko  11 місяців тому +1

      Thanks, I'm working on a new video. Let's hope for the best.

  • @GuyTaylor-t4q
    @GuyTaylor-t4q Рік тому +1

    Hello 😀

  • @ЖелезнаяЖизнь
    @ЖелезнаяЖизнь Рік тому

    Всё отлично, но как жаль что нет перевода хотя-бы на украинский. Для нашей аудитории нет смысла снимать видео?

    • @toyotacrown512
      @toyotacrown512 Рік тому

      Советскому союзу, для того чтобы вырастить таких как Гена Базарко.
      Понадобилось брать на себя долговые обязательства и исполнять их впредь.
      Заканчивали с этим уже при РФ и украина в этих расчетах как и другие страны СНГ не участвовали заведомо отказавшись, мол это не мы, а вы.
      Что дает РФ право-преемственности за СССР.
      СССР оставил после себя укрине колоссальную промышленность, но таким как Гена только и остается где-то гаситься и снимать видео научпоп.
      Что такое украинский язык? Может быть старо-славянская мова? Нет?
      Я Рязанец, меня так учили, а про украинский язык я и знать не знаю.
      Украинский язык, если он украинский, то у края чего этот язык? У какого края?

    • @ЖелезнаяЖизнь
      @ЖелезнаяЖизнь Рік тому

      @@toyotacrown512 украинский, это почти старославянский, только с влиянием польского. Смотрел старые летописи, и там было написано по русски, так вот я удивился, но там достаточно много от сегодняшнего украинского. В том числе буква і. Также там некоторые слова были из сегодняшнего украинского. Но конечно в большинстве все остальные слова больше похожи на современный русский. Так что лично по моему мнению украинский это старословянский-русский, только со временем старо-русский стал эволюционировать в сегодняшний русский, а на нашей территории (сегодняшняя Украина) он видоизменился из-за польского влияния, в большей степени это происходило на заподной части, а в центре, на востоке, и юго-востоке, старославянский так-же стал сегодняшним русским. Да и я не считаю что при СССР было плохо, и даже наоборот. Но к сожалению очень много моих соотечественников не разделяют мою точку зрения, но так-же много и разделяют. На счёт Гены, ты не прав. Он не "гасится" он живёт так-же в Украине, и он какое-то время воевал. Его я так понял комисовали, либо по ранению либо по здоровью, точно не знаю.