I realize this is a year old video but I wanted to add you can fix a crack like that with JB Weld. We had the same thing on a Ford 7000 years ago and I took a grinder and and slightly opened the crack just a little and then filled it in with JB Weld. A couple of days later I grinded it to look smoother and then we decided to just repaint and label the tractor. You could never tell it. JB Weld is amazing.
My uncle has a FARMALL that was abandoned by the city of my town. They said he won't get it fixed and it will never run. I told the worker it's a FARMALL made in USA. I watched and assisted him when he was working on it for a few days then eventually got it running! They are soo simple high quality products and your rig is a testament that they don't make'em like they used to!
Hey Mustie1 I admire your effort, I think you learned a lesson and allowed many others to learn the same. Another great video with excellent narration considering it's all as you go along with no script. Keep them coming my friend, I really look forward to watching and learning.
Hey Mustie, I just retired from being in the automotive business with exhaust shops and we mig welded a lot of cast iron manifolds and they held!,,, You did such a great job on the preparation that I swore it would have worked!
Thing was cracked all over yet still started up and purred like a kitten. Good old reliable tractor. It's too bad that both the mechanic shop and the owner failed to check for antifreeze. You'd think that to be second nature in New England. Heck even down here in Dallas I check the coolant on everything at least every fall. And we may or may not see any below freezing temps for more than a few days during any given winter. My father was no mechanic but as a shade tree do-it-yourselfer one thing he taught us was to always check the fluids, filters, hoses, and belts.
Good try! When I saw you talking about welding a cast iron block crack, I've think to myself "If this guy could do it so easy, it will be a miracle." I like the honest way you show all the mistakes. Best regards!
A suggestion: whoever drilling into a place where you dont want shavings, grease up the flutes of the drill. Most of the shavings will stick to the grease and not fall into where they are not welcome.
A few shaving in the water jacket will not harm a 70 year old engine. I promise. It is not like shavings were going into anyplace where they would matter.
I remember they did an experiment somewhere where they made a solid steel ball have water in it, and it broke through it. I know that's an old comment, but wanted to add my 2 cents, lol
In 1964 Dad had a1953 AC tractor with a cracked block and we took the engine to a man that heated the whole block, then welded it and buried it in sand for several days to cool it slow and it's still holding. Catapiler sent engine blocks from Wisconsin to Texas to get blocks welded, that's how good he was.
That is an excellent tip. Do you happen to know if the sand has to be dry? I would assume any moisture in the sand would contradict the intended goal of cooling the engine block slowly.
I had understood that cast iron is very complicated to try to weld. If you heat it up unevenly, it will crack. Sounds like this guy knows what he is doing.
Probably talking "Grey" or flake cast iron. You would be looking at >3% carbon and 2% silicon...not an easy combo for welding. The part where he heated it up was pretty cagey...iron mongers of the last 500 years would heat it up and hammer it together... Best way to achieve fusion if it is feasible.
When my grandfather and I were building 327 Chevy we had a few blocks that were destroyed from the corvette fuel pumps being drilled crooked the blocks are from the 60s and we wanted to use them. We took a old oven we had in our barn and got the oven up to 500 degrees. Took a torch heated up the block and brazed the block. Still runs and we still have 4 spare blocks
I have a 1955 chevy 235 cu in a 1949 GMC 1/2 ton pickup that I have been driving for 24 years. The engine has a cracked block that was repaired with JB Weld. still running without a leak.
As a certified welder, many tears ago, engine blocks are castings ... made with lots of air bubbles, impurities and just about everything else under the sun, they are a BITCH to weld.
What a hoot to watch you tinker! Same thought on that broken pulley. Things like that make one wonder how many surprises are awaiting on the rest of the tear down. Can't believe the rebuilder didn't put coolant in right off the bat where cooling systems rust up so fast without or at least - make it well understood to the owner that just water was used.
I bet the last people who worked on it lost two of the head nuts and replaced them with regular hex nuts. Prior to WW2, nuts were made a larger hex size than the same size bolt. In order to save material for the war effort, they started making them the same size. You can still buy them today sold as "heavy hex nuts". When we come across them in the field we just refer to them as "WW2 nuts".
Another thing to consider about the cracked block. I had a Farmall B that had the same problem. Was not cracked but rather had a hole rusted through. These tractors are 70/80 years old now and the internal corrosion over the years leaves the block thin. I fixed mine by making a 4/4 inch flat plate and centering over hole I drilled 8 1/4 inch holes in block and tapped them. I installed the plate which looked like an inspection plate. Lasted for at least 4 years then I sold tractor. I had tried to weld mine with brass before but never would hold. My 2 cents
I think that pully is cold fitted i;e heated then put on the shaft and cooled down to make a perfect seal and the bolt in the end has gone in a field yrs ago. Great work and much respect for trying to repair that block Mustie1.
Awesome job Mustie1, watched the dismantle n rebuild.........................its so satisfying when everything goes back together and no bits left over and it goes well !
Heating the cast iron around the area to be welded is your friend, I had a friend that was a VERY good welder and we ( I ran the rose bud torch as he welded) Would heat the area to be welded with a rose bud and he then welded up a cast iron block on a John Deere tractor and it worked like a champ. Not trying to be negative it worked for us. Great video!!
I wouldn't even show this, you didn't even re wire wheel the shit out of it before trying to weld it and ya don't tig cast iron and please accept my apologies for sounding like a bitch session.
Subd! I appreciate that you shared how you approach fixing things. You probably learned so much by trying to weld that crack and probably know exactly what doesn't work the next time you try it.
My Dad was a welder for 40 years. He was one of the old school guys. I've seen him braze up allot of engine block with a gas welding tip and brass rod.
good day. In the 80's we bought a allis WC for $65. it had a patch bolted on, everytime we worked it alittle harder it would foul up a spark plug. The top of the block was probably cracked on inside like the A. anyways it was learning experience for all of us. Thanks
Too check the oil, open the bottom valve under the carb on the oil pan. Fill until oil comes out. If you open the top valve and oil appears it's over filled. No dipstick on any A' s I've ever worked on. I used to restore antique farm equipment and tractors in Colorado. Loved them old ones.
awesome video mustie. i purchased a super c with a cracked block pretty close to same position. i used a arc welder and nickle rod together with torch and air chisel. i pre heated welded an inch and then hammered the hell out of it with chisel. preheat and repeat. i got really lucky though. pain in the butt. keep them coming:)
Sperry welding in Capac, Michigan used to weld engine blocks by heating the whole block in a furnace. They welded a 9n Ford with the same type of crack for me in 1980. It worked, but ‘sweated’ very slightly. They are long gone now.
What a great video!!! (well, ALL of your videos are awesome). I learned to drive on the same McCormick Farmall Cub when I was 5yrs old, haha. Farm Life, I guess.
Always been partial to the nickel rods for Cast Iron, very manageable, but you need to peen the bead after laying it. skip beading an inch at a time also helps a bunch, keeps the heat from soaking up too much.
Wow, that brings back memories. I worked my rear end off every spring/summer along with all my male cousins running a tractor just like that. Those machines are fantastic, simple, reliable work horses for those that know what they're doing with one. Grandpa was a great teacher, so were my older cousins.
I grew up on a dairy farm my dad had an International 400, had a cracked block, my btother in law tried tig weldin it, it kept cracking also, before you even started preppin it to weld, i already knew you probably were not going to succeed, im a union pipefitter, and so was my bro n law, we worked in nuke plants and all over the country making exray pipe welds, those blocks are hard to repair, all their is to it, you do a great job on all yr videos though 👍👍👍
Must've. I found a free 1968 camaro. Gonna try to get it running after 25 yrs. love your vids and outside the box thinking. That's missing in 90% of our youth.
You could always practice fixing the crack once you have the old block out of the tractor. Be fun to try anyways, just a thought. Great video as always.
Watching you weld that block, made remember watching my Dad do the same thing on one of our tractors. He always would use nickel rod with a stick welder. Get me your address and I'll send you a tube of nickel rod ,which seem to work well for this application. Great video, you should have kept going I think you could have saved it. I really enjoy these video,s keep making them.
Farmall. American classic. I love international harvester. I would clean it grind a v shape drill a small hole on each end of crack to stop spreading and weld it. The difference between you and all the trolls is your actual doing and not sitting at a computer. Your doing fine.
Brian!! (I have never met him, but he is a friend and confidant of Mustie. You know he's good.) I met Mustie once. We are acquaintances. Really nice man.
I don't know about welding engine blocks but I remember Dad welding a crack in the final drive on our Farmall Cub and he used nickel rod and just welded a section at a time and let it cool off good between times,it was still holding good when we sold it 24 years later.
I watched an older man fix about a four inch crack in a B Farmall block back around 1970. He drilled the holes at both ends and veed out the crack almost to the bottom to give it a lot of surface area. Then he built a small fire and built a bed of coals and put some bare lead battery terminals in a tin can and melted them down. He them put some sulphur in it for a flux and it brought all the impurities to the top and poured them off. He then took a piece of yardstick and paddled the clean lead into the crack. He let it cool to the right consistency and paddled it on. I raked hay with that tractor for several years after that.
you have all kinds of neat project's laying around Thierry. that place is like a thinkers heaven keep it up I enjoy seeing your videos I just joined if your wondering..
Our up north church had one of these for a mowing tractor. The engine had been replaced with one that was used on a combine. It operated OK but the oil fill was now in the wrong place making adding oil difficult.
Oooh I used to drive one , with the mower deck! :) great little tractors! and a Hoot to drive! I don't think it was an "A" though started differently .. had a spring loaded foot pedal that would hit the ground lug on the starter to get it to start :) :)
All your video's are great! Even keel always (no screamin' or breakin' stuff) very nice! It's neat how you think about things before jumpin' to the point of no return. Please keep 'em comin'...
I was taught to always keep the push rods matched to the same rocker. Just make a simple piece of scrap lumber with appropriately sized holes numbered to match the engine.
A bit late now but the answer to a cracked cast steel block or transmission is the use of an arc welder and Duralloy 5283 low hydrogen high tensile welding rods. The idea is to run a single continuous bead along the entire length of the crack followed up by lateral one inch long "stitches" across the bead every inch or so to aid in holding the welded sections together under load. The procedure worked for me on a Belarus tractor with a cracked block and again when the same tractor literally snapped in half across the gearbox section. In that case the tractor was set up with jigs and clamps to pull the two halves together before welding. Afterwards the tractor returned to full service.
I weld cast frequently with Arc. Preheat in a small forge then place it back in after the repair and turn the forge off to cool, or place the part in a sand bucket and cover. Have a pretty high success rate.
I was given a Ford 8n Tractor with a cracked block. They had brazed it and epoxied and still leaked. I bought a parts tractor for less than a block and just swapped engines. Mine was tired and this one seems much better.
There's A company that makes several kits to replace N series engines with other Ford engines including flat head and ohv V-8's. You can see some of the conversions at awesomehenry.com
when doing cast iron,you drill 1/4 " hole at each endnof the crackthen grind a bevel ans drill a 1/4" hole every inchheat up the area to be welded weld each inch after arc welding then tap witha chipping hammer until warm to the touchnif the casting is of good quality when done there will be no leaks,job done .
Thanks for this series. Working on my own 52 Super-A. At the point where I need to order the rebuild kit. Like that lift you have there. Was that a hydraulic pump under the distributor? Didn't think the regular A model had hydraulics. Maybe not the original engine? Think the pulley was just pressed on. Mine didn't have a bolt in it, either. Have to order a new one as mine broke getting it off. Understand that it's pretty common for them to break when removing. Everything I've read on removing them is that they are bear to get off. I just had a jaw puller and it busted mined when removing it. Good effort on the welding. Thanks!
Do you end up selling some of the stuff you get running? Like the generators and stuff like that? Would you say you generally make a enough to justify the time? Or is it just a hobby that you try to just breakeven on? Love the context been binge watching your videos
Assuming this is cast iron like a head, you can weld it with a nickel rod on low heat stopping every inch or two and tapping it with a hammer to stress relieve it. I have welded cast iron heads this way. Drilled the holes same way to prevent further cracking.
This is a tough repair. I know of a cold process out of Buffalo, New York. It"s called metal lock service and I've seen it used on cast Iron, 25 ton press. We used it on our industrial air compressor heads. I know they could fix cracks like this with ease.
I owned one of these tractors and I rebuilt mine and it had a frost damaged area on the side of the block for which I made a sheet metal patch and attached it with small bolts into drilled and taped holes around the hole in the block...lucky these engines don't have a pressurized cooling system...I didn't have another block...pretty sure this is a sleeved engine so the cylinders are easily replaced
Hardest things to do ... Welding that cast iron right inside the machine all the contaminants etc I learned my lesson already with this but it's the heart that we have as us as a mechanic
The last old Ford Tractor I split, I used two cherry picker engine pullers and one very strong A-frame that I had over the project with a good chain hoist. In all honesty with all these methods of lifting each section, I had no serious problems that I can recall doing the job. But obviously all jobs such as this has it's aggravating moments. I used the A-frame and chain hoist for lifting the main heavier section of the tractor. I use the cherry pickers to lift the lighter sections and actually pull and split the tractor if I recall correctly? I know the job was a pain in the ass, but it went fairly quick.
I stopped at 44:20 and what I would have done is ................... exactly what you did - haha. I have a feeling you and I both get enthused and a bit excited pulling the accessories off and especially when we open the covers and pull the head just to see all that was going on inside her! Am I wrong? Don't get mad, but when you were gonna tig that crack, I said to myself: O cmon really?, you aren't really gonna do that? You do better work than that. Until I realized you were just trying a little something for your own curiosity (which I might have done). Sooo glad it didn't work and you realized it without having put to much effort and time into the brazing just to realize after opening her up that there was a lot more cracking. At any rate, she will get a new body (time at the spa) and with you working your magic on her, a very well done new lease on life! BTW, thanks for being upfront and honest showing us your tig skills (or necessary practice needed - haha). You can still practice your tig skills on the old block, right? This is very interesting and a joy to watch! Guess you don't need me since Brian is helping, so I'll just sit over here in the corner and watch if you don't mind?!
I realize this is a year old video but I wanted to add you can fix a crack like that with JB Weld. We had the same thing on a Ford 7000 years ago and I took a grinder and and slightly opened the crack just a little and then filled it in with JB Weld. A couple of days later I grinded it to look smoother and then we decided to just repaint and label the tractor. You could never tell it. JB Weld is amazing.
My uncle has a FARMALL that was abandoned by the city of my town. They said he won't get it fixed and it will never run. I told the worker it's a FARMALL made in USA.
I watched and assisted him when he was working on it for a few days then eventually got it running!
They are soo simple high quality products and your rig is a testament that they don't make'em like they used to!
Hey Mustie1 I admire your effort, I think you learned a lesson and allowed many others to learn the same. Another great video with excellent narration considering it's all as you go along with no script. Keep them coming my friend, I really look forward to watching and learning.
Hey Mustie, I just retired from being in the automotive business with exhaust shops and we mig welded a lot of cast iron manifolds and they held!,,, You did such a great job on the preparation that I swore it would have worked!
Thing was cracked all over yet still started up and purred like a kitten. Good old reliable tractor. It's too bad that both the mechanic shop and the owner failed to check for antifreeze. You'd think that to be second nature in New England. Heck even down here in Dallas I check the coolant on everything at least every fall. And we may or may not see any below freezing temps for more than a few days during any given winter. My father was no mechanic but as a shade tree do-it-yourselfer one thing he taught us was to always check the fluids, filters, hoses, and belts.
Good try!
When I saw you talking about welding a cast iron block crack, I've think to myself "If this guy could do it so easy, it will be a miracle."
I like the honest way you show all the mistakes. Best regards!
A suggestion: whoever drilling into a place where you dont want shavings, grease up the flutes of the drill. Most of the shavings will stick to the grease and not fall into where they are not welcome.
Thank you very much was helpful for me :)
also works with taps my 01 ford pu blew a plug and the mechanic put an insert in and used grease to keep shavings out of the cylinder
A few shaving in the water jacket will not harm a 70 year old engine. I promise. It is not like shavings were going into anyplace where they would matter.
@@arlynsmith9196 I understand that. It was more of a general piece of advice.
Freezing water is impressive. Had a Small Block Chevy 307 hold a 1/2 crack all along the water jacket. Ran beautiful, but mixed water with the oil.
a milk shake maker
I remember they did an experiment somewhere where they made a solid steel ball have water in it, and it broke through it.
I know that's an old comment, but wanted to add my 2 cents, lol
@@alericjohansen6775 Nothin wrong with that!
@@alericjohansen6775 nothing at all, there's an industrial process that uses water to form steel into various shapes.
In 1964 Dad had a1953 AC tractor with a cracked block and we took the engine to a man that heated the whole block, then welded it and buried it in sand for several days to cool it slow and it's still holding. Catapiler sent engine blocks from Wisconsin to Texas to get blocks welded, that's how good he was.
That is an excellent tip. Do you happen to know if the sand has to be dry? I would assume any moisture in the sand would contradict the intended goal of cooling the engine block slowly.
I had understood that cast iron is very complicated to try to weld. If you heat it up unevenly, it will crack. Sounds like this guy knows what he is doing.
Probably talking "Grey" or flake cast iron.
You would be looking at >3% carbon and 2% silicon...not an easy combo for welding.
The part where he heated it up was pretty cagey...iron mongers of the last 500 years would heat it up and hammer it together...
Best way to achieve fusion if it is feasible.
Kyle Simukka Duh
When my grandfather and I were building 327 Chevy we had a few blocks that were destroyed from the corvette fuel pumps being drilled crooked the blocks are from the 60s and we wanted to use them. We took a old oven we had in our barn and got the oven up to 500 degrees. Took a torch heated up the block and brazed the block. Still runs and we still have 4 spare blocks
I have a 1955 chevy 235 cu in a 1949 GMC 1/2 ton pickup that I have been driving for 24 years. The engine has a cracked block that was repaired with JB Weld. still running without a leak.
It is sealed, not repaired.
Try an OXYHDROGEN TORCH.
AKA... HHO ...
A SIMPLE ELECTROLYSIS OF STAINLESS STEEL
ANODE AND CATHODE, IN WATER.
As a certified welder, many tears ago, engine blocks are castings ... made with lots of air bubbles, impurities and just about everything else under the sun, they are a BITCH to weld.
What a hoot to watch you tinker! Same thought on that broken pulley. Things like that make one wonder how many surprises are awaiting on the rest of the tear down. Can't believe the rebuilder didn't put coolant in right off the bat where cooling systems rust up so fast without or at least - make it well understood to the owner that just water was used.
it gets better the more we go to the internals
Anti freeze will mess a new rebuild if it leaks, water doesn’t when u know everything is ok then put antifreeze in it
I bet the last people who worked on it lost two of the head nuts and replaced them with regular hex nuts. Prior to WW2, nuts were made a larger hex size than the same size bolt. In order to save material for the war effort, they started making them the same size. You can still buy them today sold as "heavy hex nuts". When we come across them in the field we just refer to them as "WW2 nuts".
I appreciate your explanation! Always like those kind of off the wall history facts! Fred
I learned how to drive on a 1953 model. Thanks for the memories.
Another thing to consider about the cracked block. I had a Farmall B that had the same problem. Was not cracked but rather had a hole rusted through. These tractors are 70/80 years old now and the internal corrosion over the years leaves the block thin. I fixed mine by making a 4/4 inch flat plate and centering over hole I drilled 8 1/4 inch holes in block and tapped them. I installed the plate which looked like an inspection plate. Lasted for at least 4 years then I sold tractor. I had tried to weld mine with brass before but never would hold. My 2 cents
Really enjoy your videos, all straight forward and easy to follow.
Really enjoying this series of the Farmall A because when I lived in New Hampshire I had one.
I think that pully is cold fitted i;e heated then put on the shaft and cooled down to make a perfect seal and the bolt in the end has gone in a field yrs ago. Great work and much respect for trying to repair that block Mustie1.
Awesome job Mustie1, watched the dismantle n rebuild.........................its so satisfying when everything goes back together and no bits left over and it goes well !
impressed with your knowledge of the older engines.
I absolutely love you're channel! I wish I could have your knowledge but then again I'm watching your videos.
Heating the cast iron around the area to be welded is your friend, I had a friend that was a VERY good welder and we ( I ran the rose bud torch as he welded) Would heat the area to be welded with a rose bud and he then welded up a cast iron block on a John Deere tractor and it worked like a champ. Not trying to be negative it worked for us. Great video!!
Thats a might nice shop you got there, friend.
thanks
Ferro nickel stick welding would have worked for that crack much more forgiving. Preheat still required. Great video as always!!
70 degrees in PA today and two Mustie vids in 24 hours. Good times, man.
took a motorcycle ride for 2 hrs today
yes Sir..life is good...and we don't take this good weather for granted up here in Buffalo..
0fend0 now it's cold here in Michigan
You should of been using castolin utecktic stick rod for cast iron
I wouldn't even show this, you didn't even re wire wheel the shit out of it before trying to weld it and ya don't tig cast iron and please accept my apologies for sounding like a bitch session.
I love farmall (IH). Especially the antiques. Very cool! Nice job!
Subd! I appreciate that you shared how you approach fixing things. You probably learned so much by trying to weld that crack and probably know exactly what doesn't work the next time you try it.
My Dad was a welder for 40 years. He was one of the old school guys. I've seen him braze up allot of engine block with a gas welding tip and brass rod.
Mig welder works good on cast iron. I have welded several cast iron projects with a mig welder. Haven't had anything crack yet knock on wood.
good day. In the 80's we bought a allis WC for $65. it had a patch bolted on, everytime we worked it alittle harder it would foul up a spark plug. The top of the block was probably cracked on inside like the A. anyways it was learning experience for all of us. Thanks
Too check the oil, open the bottom valve under the carb on the oil pan. Fill until oil comes out. If you open the top valve and oil appears it's over filled. No dipstick on any A' s I've ever worked on. I used to restore antique farm equipment and tractors in Colorado. Loved them old ones.
awesome video mustie. i purchased a super c with a cracked block pretty close to same position. i used a arc welder and nickle rod together with torch and air chisel. i pre heated welded an inch and then hammered the hell out of it with chisel. preheat and repeat. i got really lucky though. pain in the butt. keep them coming:)
Name one thing you don't know how to fix it look like your knowledge is endless , I really enjoy watching I learn so much thanks.
Sperry welding in Capac, Michigan used to weld engine blocks by heating the whole block in a furnace. They welded a 9n Ford with the same type of crack for me in 1980. It worked, but ‘sweated’ very slightly. They are long gone now.
What a great video!!! (well, ALL of your videos are awesome). I learned to drive on the same McCormick Farmall Cub when I was 5yrs old, haha. Farm Life, I guess.
Always been partial to the nickel rods for Cast Iron, very manageable, but you need to peen the bead after laying it. skip beading an inch at a time also helps a bunch, keeps the heat from soaking up too much.
Wow, that brings back memories. I worked my rear end off every spring/summer along with all my male cousins running a tractor just like that. Those machines are fantastic, simple, reliable work horses for those that know what they're doing with one. Grandpa was a great teacher, so were my older cousins.
Watching with interest as I drove one of these when I was about 5 or 6 on a farm.
I grew up on a dairy farm my dad had an International 400, had a cracked block, my btother in law tried tig weldin it, it kept cracking also, before you even started preppin it to weld, i already knew you probably were not going to succeed, im a union pipefitter, and so was my bro n law, we worked in nuke plants and all over the country making exray pipe welds, those blocks are hard to repair, all their is to it, you do a great job on all yr videos though 👍👍👍
Must've. I found a free 1968 camaro. Gonna try to get it running after 25 yrs.
love your vids and outside the box thinking. That's missing in 90% of our youth.
You could always practice fixing the crack once you have the old block out of the tractor. Be fun to try anyways, just a thought. Great video as always.
Watching you weld that block, made remember watching my Dad do the same thing on one of our tractors. He always would use nickel rod with a stick welder. Get me your address and I'll send you a tube of nickel rod ,which seem to work well for this application. Great video, you should have kept going I think you could have saved it. I really enjoy these video,s keep making them.
Lapping some valves and watching some mustie......what a great day.
My dad had a Super A that I grew up in NY concord grape country. Row crop tractors are so unique. Tippy, but unique.
Farmall. American classic. I love international harvester. I would clean it grind a v shape drill a small hole on each end of crack to stop spreading and weld it. The difference between you and all the trolls is your actual doing and not sitting at a computer. Your doing fine.
Brian!! (I have never met him, but he is a friend and confidant of Mustie. You know he's good.) I met Mustie once. We are acquaintances. Really nice man.
We had one of these growing up for skidding 4 foot logs for firewood and using the PTO to run a cordwood saw.
I don't know about welding engine blocks but I remember Dad welding a crack in the final drive on our Farmall Cub and he used nickel rod and just welded a section at a time and let it cool off good between times,it was still holding good when we sold it 24 years later.
what a beautiful machine, hello from Yucca Valley.
My father rebuilt a 1947 Farmall trike in our garage when I was a kid. We used it to pull hay wagons in the summer time..
amazing. The engine actually holds that tractor together. Never seen that before!
I watched an older man fix about a four inch crack in a B Farmall block back around 1970. He drilled the holes at both ends and veed out the crack almost to the bottom to give it a lot of surface area. Then he built a small fire and built a bed of coals and put some bare lead battery terminals in a tin can and melted them down. He them put some sulphur in it for a flux and it brought all the impurities to the top and poured them off. He then took a piece of yardstick and paddled the clean lead into the crack. He let it cool to the right consistency and paddled it on. I raked hay with that tractor for several years after that.
Love the vids, keep em coming!
we had a super A with a 4 inch hole the same place as yours cut a grove in the crack and J B weld lasted 15 years took 2 hours to fix
MAN that A cranked right up with ease. you've got a new subscriber my friend! thanks for all your videos. very enjoyable.
you have all kinds of neat project's laying around Thierry. that place is like a thinkers heaven keep it up I enjoy seeing your videos I just joined if your wondering..
Our up north church had one of these for a mowing tractor. The engine had been replaced with one that was used on a combine. It operated OK but the oil fill was now in the wrong place making adding oil difficult.
Oooh I used to drive one , with the mower deck! :) great little tractors! and a Hoot to drive! I don't think it was an "A" though started differently .. had a spring loaded foot pedal that would hit the ground lug on the starter to get it to start :) :)
I really enjoy watching you work. I've learned a lot so far. Is there anything you can't do? Mechanically speaking of course.
At 32:34 I saw why it sounded pretty much the same without the muffler that was warm to the touch. Thanks for the video.
All your video's are great! Even keel always (no screamin' or breakin' stuff) very nice! It's neat how you think about things before jumpin' to the point of no return. Please keep 'em comin'...
The absence of swearing and screaming is always nice. Not exactly how we work here but ... definitely something to strive for lol.
mustie you get all the cool toys!! love the old tractors.
Gotta love these old machines...
*has a 10" crack in the block*
Tractor: "Ok I'm ready to go to work"
When you pointed the camera to the "problem". Yikes!! Made me shiver.
Roger that T.C.
Excellent video here! Both entertaining and informative. Great job my friend.
I was taught to always keep the push rods matched to the same rocker. Just make a simple piece of scrap lumber with appropriately sized holes numbered to match the engine.
Great job Sir. Congratulations from 🇧🇷 👏 👏 👏 👏 👏
Every high school in Los Angeles had one of these tractors to maintain their athletic fields and tracks.
A bit late now but the answer to a cracked cast steel block or transmission is the use of an arc welder and Duralloy 5283 low hydrogen high tensile welding rods. The idea is to run a single continuous bead along the entire length of the crack followed up by lateral one inch long "stitches" across the bead every inch or so to aid in holding the welded sections together under load. The procedure worked for me on a Belarus tractor with a cracked block and again when the same tractor literally snapped in half across the gearbox section. In that case the tractor was set up with jigs and clamps to pull the two halves together before welding. Afterwards the tractor returned to full service.
I weld cast frequently with Arc. Preheat in a small forge then place it back in after the repair and turn the forge off to cool, or place the part in a sand bucket and cover. Have a pretty high success rate.
Look at cold stiching the block hope this info is ok just watching some of your back dated vlogs big thumbs up from the UK
That is way too much snow on the ground there! Sweet looking red tractor.
I was given a Ford 8n Tractor with a cracked block. They had brazed it and epoxied and still leaked. I bought a parts tractor for less than a block and just swapped engines. Mine was tired and this one seems much better.
There's A company that makes several kits to replace N series engines with other Ford engines including flat head and ohv V-8's.
You can see some of the conversions at awesomehenry.com
when doing cast iron,you drill 1/4 " hole at each endnof the crackthen grind a bevel ans drill a 1/4" hole every inchheat up the area to be welded weld each inch after arc welding then tap witha chipping hammer until warm to the touchnif the casting is of good quality when done there will be no leaks,job done .
Thanks for this series. Working on my own 52 Super-A. At the point where I need to order the rebuild kit. Like that lift you have there. Was that a hydraulic pump under the distributor? Didn't think the regular A model had hydraulics. Maybe not the original engine? Think the pulley was just pressed on. Mine didn't have a bolt in it, either. Have to order a new one as mine broke getting it off. Understand that it's pretty common for them to break when removing. Everything I've read on removing them is that they are bear to get off. I just had a jaw puller and it busted mined when removing it. Good effort on the welding. Thanks!
Industrial boiler cement, or Durmetal.
The Durmetal kit is a bit expensive for one time use, but its great stuff.
Stitching the crack is best way welding puts all kinds of stress in cast seen some amazing repairs done on cast with stitching
welding cast you have to drill a hole on each end of the crack or it will crack past the weld
Santa sez, I've seen your welding and you're getting a grinder for Christmas!
Do you end up selling some of the stuff you get running? Like the generators and stuff like that? Would you say you generally make a enough to justify the time? Or is it just a hobby that you try to just breakeven on?
Love the context been binge watching your videos
I would skin back the suspect area and use an Magnaflux brand dye penetrant kit.
Super effective on any flaws in cast iron.
Assuming this is cast iron like a head, you can weld it with a nickel rod on low heat stopping every inch or two and tapping it with a hammer to stress relieve it. I have welded cast iron heads this way. Drilled the holes same way to prevent further cracking.
This is a tough repair. I know of a cold process out of Buffalo, New York. It"s called metal lock service and I've seen it used on cast Iron, 25 ton press. We used it on our industrial air compressor heads. I know they could fix cracks like this with ease.
I owned one of these tractors and I rebuilt mine and it had a frost damaged area on the side of the block for which I made a sheet metal patch and attached it with small bolts into drilled and taped holes around the hole in the block...lucky these engines don't have a pressurized cooling system...I didn't have another block...pretty sure this is a sleeved engine so the cylinders are easily replaced
That's a great looking tractor. I like it.
It is. I enjoyed the cockpit view. Didn't realize it was offset like that. Interesting, and a wonderful beast of a tractor.
did it years ago on water pump
used old shelaced coathanger and oxy acl worked great . just keep the surface temp RED
Sweet little A, I have my late grandpa's 46 H he bought new.
Chrome sockets on impacts will help keep your local dentist in business.
I would worry more about a trip to the eye surgeon.
Hardest things to do ... Welding that cast iron right inside the machine all the contaminants etc I learned my lesson already with this but it's the heart that we have as us as a mechanic
On the tv show Wheeler dealers they had a verry skillfil man stitch an engineblock. That looked awesome!!!
I used to stitch cast iron heads back in the day. Always worked
I actually enjoyed 'the living hell' out of this video!
The last old Ford Tractor I split, I used two cherry picker engine pullers and one very strong A-frame that I had over the project with a good chain hoist. In all honesty with all these methods of lifting each section, I had no serious problems that I can recall doing the job. But obviously all jobs such as this has it's aggravating moments. I used the A-frame and chain hoist for lifting the main heavier section of the tractor. I use the cherry pickers to lift the lighter sections and actually pull and split the tractor if I recall correctly? I know the job was a pain in the ass, but it went fairly quick.
Grind it out and stick weld it.
I cant wait to catch up on this mini series
I stopped at 44:20 and what I would have done is ................... exactly what you did - haha.
I have a feeling you and I both get enthused and a bit excited pulling the accessories off and especially when we open the covers and pull the head just to see all that was going on inside her! Am I wrong?
Don't get mad, but when you were gonna tig that crack, I said to myself: O cmon really?, you aren't really gonna do that? You do better work than that. Until I realized you were just trying a little something for your own curiosity (which I might have done). Sooo glad it didn't work and you realized it without having put to much effort and time into the brazing just to realize after opening her up that there was a lot more cracking. At any rate, she will get a new body (time at the spa) and with you working your magic on her, a very well done new lease on life! BTW, thanks for being upfront and honest showing us your tig skills (or necessary practice needed - haha). You can still practice your tig skills on the old block, right?
This is very interesting and a joy to watch! Guess you don't need me since Brian is helping, so I'll just sit over here in the corner and watch if you don't mind?!
you can still hold the light
I enjoy your videos bro. Hope that you are healthy. Praying for your safety and success. ☝🙏👍👉...
How many times did you get caught on those studs sticking out of the back wheels?
I have used J.B. weld on things such as this and they ran for years. One was a tiller that threw a rod and cracked block
Old tractors are fun to work on. That's a real bummer there was no antifreeze.
I mig welded a broken in half cast water meter cover. It took a High Heat setting but it's still fixed.
ran really good for having a cracked block!