You're supposed to drill a small hole at the end of the crack so it doesn't form again. And that missing piece, a couple of spot welds using a thicker metal to mach the casing and then epoxy it would work better
@@nikhargyanath795 well its a test for the insulation quality, so maybe... Its a insulation tester, a rather old one. Modern one's look like a multimeter/ are a multi meter.
well done, looks great. it appears you sealed up the dust port however, could be cut in again. It would eject most dust out the back instead of blowing a cloud of dust around the blade
nice result and video! great work
Excellent restoration 👍
my life would be easier, if I'd had your patience 👌🏻🍀
спасибо за видео
Good job mash'Allah
Hello, excellent video! One question, what is the liquid you use at minute 10:00 to change the color of the metal? Thanks a lot
The liquid is cold blue
You're supposed to drill a small hole at the end of the crack so it doesn't form again. And that missing piece, a couple of spot welds using a thicker metal to mach the casing and then epoxy it would work better
👏👏
you put the disk in the wrong way
Repairs are hard to watch.
What is that machine being used @ 14:08?
it literally says it on the screen...
@@notagunfreak8146 I know, but I mean what is that machine called?
@@nikhargyanath795 well its a test for the insulation quality, so maybe...
Its a insulation tester, a rather old one. Modern one's look like a multimeter/ are a multi meter.
@@notagunfreak8146 ah I figured it was some sort of single-purpose meter. Thanks mate, I learned something new today 😊
What is your instagram?
Friend, excuse me, what is the name of the liquid that applies a magnetic field, to avoid corrosion??🙋🏻♂️
Why the chemical paint stripper if your going to sand blast anyway?
My new tools look that rusted after one week in my humid basements.
may i know what model it’s is,i think i have same model but not sure
Video başlamadan, "beğen" tuşuna bastım!
Mükemmel olduğunu biliyorum
I really enjoy watching your videos.nice job
히타치. 한국에서도 유명한 브랜드입니다. 잘봤습니다. 같은 종류의 파워툴 수리할 때, 도움이 될 것 같아요 🥰😍🤩🥰😍🤩
what's that transparent paint?
Nicely done 👍👍👍Thanks for sharing
А как дизайн похож на ту что делают сейчас!
Great work👍
And just like that it's new again 👍 brilliant job.
well done, looks great.
it appears you sealed up the dust port however, could be cut in again. It would eject most dust out the back instead of blowing a cloud of dust around the blade
9
Сколько лет этой старушке ? Судя по исполнению она гдето 60х годов выпуска!
Nice work nice result 👍
Cho mình xin mã của cây vít gập makita mà bác đang xài với?
This seemed a little more straightforward than some of the other electric tools you have restored. Was it less complicated or is it my imagination?
Well he didnt make it cordless
Excellent job.
Super
Did you only change one if the bearings?
Good👍👍❤️
Thanks
👍
Super 👏👏👍👍🇧🇷
brillaz
👍👍
Bom trabalho...
10:17 black paint or what?
It's called a blueing liquid, being painted on metal turns to very dark blue, with a small delay while painting, creating an interesting effect
Ficou novinha novamente, parabéns 👏👏👏👏👏👏👏👏👏🙏🍀🇧🇷
D
I use rusteloum Hammerite paint give hand tools grinder air compressor give it texture finish