Complete Restoration of Broken & Rusty Knife

Поділитися
Вставка
  • Опубліковано 23 лют 2019
  • Restoring a Rusty knife
    Exclusive updates, news, & content burrfection.com/

КОМЕНТАРІ • 215

  • @kidstube5062
    @kidstube5062 5 років тому +41

    Hey man, been watching you for a year or so now and thanks to you I just managed to take a fully dull knife to razor sharp for the first time. Thanks for your work!

  • @pixilatedwang
    @pixilatedwang 5 років тому +1

    Thank you for the quick response to upload requests!

  • @brandonwalmsley1863
    @brandonwalmsley1863 5 років тому

    I owe a big thank you to you Ryky! I have a Chicago Cutlery chef knife that my wife and I got for our wedding. We were young and lazy and tossed all of our knives in the dishwasher. The chef knife has rusted and chipped, so watching this video inspired me to invest in some whetstones. I also have been using a Dalstrong Phantom Filet knife that I don’t have sharpening tools for. Hoping I can get those knives better than they were before! Again thank you for these videos! They’ve been a big help in prepping!

  • @jordans318
    @jordans318 5 років тому

    Yes! Thanks for uploading 👍🏽

  • @CilicianElite
    @CilicianElite 5 років тому +1

    Awesome restoration. I’m glad you posted both videos. Enjoyed them both! :)

  • @MrEd-vo8lj
    @MrEd-vo8lj 5 років тому

    Amazing difference - looks great!!

  • @BBBYpsi
    @BBBYpsi 5 років тому

    Fantastic job. Really enjoyed this & your great workmanship & knowledge. Might have to get a set of those erasers.

  • @flannelguydiy6458
    @flannelguydiy6458 5 років тому +11

    Really nice job on that knife... reminds me of when I spent an hour removing deep chips out of my sister's knife. Was complete trash at first but then ended up being near perfect. Thanks for the video...

  • @jetobey5656
    @jetobey5656 2 роки тому +2

    I confess; this knife I would clean up the edge and tip with my T-7 Tormek with diamond wheel, and then reset the bevel by hand. I can control the T-7 to advance into the wheel by less than a mm each step, and I would freehand the tip on the wheel. It would leave me with a flat edge, but stoning the bevel would be fairly easy.

  • @AnonZero0
    @AnonZero0 5 років тому +3

    *Long videos--are the best way to go!* *Those who prefer short--can fast forward.*

  • @rentiap
    @rentiap 4 роки тому +6

    Oh Man, so sad to see such a beautiful knife mistreated like this.
    I would love to get a knife like this to repair then cherish.

    • @elevationmoto6208
      @elevationmoto6208 Рік тому +1

      Indeed we do cherish beautiful neglected works of art that we restore with care.

  • @bigx3489
    @bigx3489 5 років тому +1

    Nice job Ricky !

  • @hjackgbr78
    @hjackgbr78 5 років тому +10

    Great video to watch on a Sunday morning! As everyone else is asking; where did you get that knife from? You did a great job and it looks amazing. You should be proud to keep that in your collection.

    • @barretharms6948
      @barretharms6948 3 роки тому

      I agree if that's the 1st time hes reshaped to blade. Then again I'm a knife maker so you can only keep so many then you have to sell them.

  • @vasilralev3921
    @vasilralev3921 5 років тому

    I love that you make Short and long videos separated. Keep up the good work

  • @jembawls
    @jembawls 5 років тому +3

    These restorations are by far my fav videos of yours! Would love more if you have the time/interest!

  • @kaymanul
    @kaymanul 5 років тому

    Great great work! I also hate making old knives completely new. It just kills them.

  • @silentone11111111
    @silentone11111111 5 років тому

    Cant wait to see you do the handle work. My fave knife is a Tojiro even though I got some nice Dalstrong and Enso ones. But I always find myself going back to my Tojiro Santoku knife :)

  • @adriancarrillo4343
    @adriancarrillo4343 5 років тому

    Awsome video thanks to this j was able to restore the tip on my knife to almost perfect thank you

  • @RubenRC94
    @RubenRC94 4 роки тому +2

    I was on the fence of getting a tojiro santoku. This vid make me jump the fence and get it

  • @revstonefarm7454
    @revstonefarm7454 5 років тому

    Very nice job Ryky

  • @maibamrajibsingha3837
    @maibamrajibsingha3837 5 років тому

    AWESOME JOB.

  • @knifesharpeningnorway
    @knifesharpeningnorway 5 років тому

    Looks good mate 😊

  • @Ripper7620
    @Ripper7620 4 роки тому +1

    Thank you for doing these full knife restoration, full length videos. I've watched three of them so far, and watching how you continually change the bevel angles throughout the first part of the process has given me more confidence to reprofile the bevel on my practice knife. Unfortunately, the lowest grit I have ATM is a #1000 Suehiro Cerax, when a #320 Suehiro Cerax would likely be ideal for the VG10. Never the less I'll be attempting to go from about 20 degrees, down to around 15 degrees on the #1000.

    • @TheAndreArtus
      @TheAndreArtus 4 роки тому +2

      If you don't require larger grit sizes (lower number stones), which few of us do as they serve mostly for reprofile and restoration work, then consider sandpaper for those grits. .

  • @JohannR117
    @JohannR117 5 років тому

    This is so great, was waiting for the complete video. Waiting for my flight home from Chicago and watching. ^_^ Lol, I was rambling on a bit to mum about knife stuff I've learned from here.

  • @AZ-Patriot
    @AZ-Patriot 5 років тому +3

    Bummer that you had to destroy the Kuro Ichi finish but it's a perfect restoration other than that. Great job, Ryky.

  • @hrhamada1982
    @hrhamada1982 5 років тому +1

    great video!
    THANKS
    I also like the idea of posting both a short video to give people the general idea and a long video so people can learn more in depth.
    If only long videos, we can't watch during parts of our busy lives unless we schedule in the time. this way we can plan.
    OR if only short videos we miss some of the in depth analysis and explanations and seeing minor adjustments you make along the way as you react to what's happening in real time.

  • @4-food
    @4-food 5 років тому

    Great work brother

  • @brendandeguzman12
    @brendandeguzman12 5 років тому +5

    Fantastic work as always Ryky!
    Just a heads up, audio cuts out from 20:50-21:05.
    No big deal, just thought you should know

  • @jimburns1927
    @jimburns1927 4 роки тому

    Beautiful Job Ryky restoring the knife to better than original condition! Really love the new Sabatier style you put on it. Question do you still have it!

  • @wickedandlazy
    @wickedandlazy 5 років тому

    Awesome!

  • @dionlovrecich4259
    @dionlovrecich4259 4 роки тому

    Ryky vs. Onion.. Nice finish to this video, that noise you make says it all.

  • @tasmedic
    @tasmedic Рік тому

    I'd take this knife to my lubricated grinding wheel to remove the chips and restore the tip. Then, I'd take it to my atoma 140 to start putting an edge profile on it. Grinding wheels are a lot cheaper than diamond stones, and they work very well for removing metal quickly. The key is to go steadily and not to heat up the steel, which damages the temper and hardness of the knife.

  • @capspik
    @capspik 2 роки тому

    I see a emerging market for these rusty knives )

  • @sanctufilms
    @sanctufilms 5 років тому +12

    Ricky, thanks for showing us the steps of the restoration. Question: what was in the white Nalgene bottle, water or mineral oil? I only saw you add a few drops to the Atoma 140.

    • @barretharms6948
      @barretharms6948 3 роки тому

      Because I only used a couple of drops I believe he was using mineral oil however since it was a kitchen knife I suggest olive oil. I believe he was using oil because it doesn't take that much oil and you don't have to constantly be wedding the stone also he was not using stone he was using diamond plate. A whetstone is only a whetstone until it gets oil on it thin it is an oil stone regardless what it was. I have a collection of furnish bricks that were waterstone's until somebody got too much bacon fat on them. I'll have to cook the grease out of them completely and then we face them completely.

  • @Lolz3yoyo
    @Lolz3yoyo 5 років тому

    Wonderful video. I was wondering if you got a change to try Wusthof new Epicure line and whether or not you will do a review on them.

  • @alicepaige4929
    @alicepaige4929 3 роки тому +1

    Thanks Ryky, great instructional video
    So how how long did it take all told
    Was it just 40 minutes or so.
    And thanks my knife arrived yesterday
    So in love with it

  • @paolobuffa6889
    @paolobuffa6889 5 років тому

    Splendid knife, and excellent commitment for his rescue.
    I am extremely picky and would have taken off the handle: sometimes the rust continues to expand until it is cracked.
    I hope that those who use this craft in the future will have more attention and care than the previous owner.
    Thanks again for the religious care of this work of art.

  • @sonkekoster3105
    @sonkekoster3105 3 роки тому

    Hi Ryky, I like the new look of the old knife. The rustic Nashiji finish is cool. Good video to encourage people to repair their knifes, if something went wrong.

    • @Burrfection
      @Burrfection  3 роки тому

      yup. you don't have to do a lot

  • @dangerdave616
    @dangerdave616 5 років тому +5

    I recommend using Evaporust to remove rust. It's a non toxic solution that doesn't require any abrasion to work, therefore no scratches on the part. Those erasers look like they work very well though.

  • @tevo5415
    @tevo5415 2 роки тому +1

    Hey Ryky! Thanks for the video, it's amazing to see this. I'd love to try it out myself but I don't know where to get cheap knives to restore. Do you have any good source that's accessible in europe?

  • @jelmerth
    @jelmerth 2 роки тому

    saw your video two days ago, at home i went down to my bike shed, where al my sport stuf is, My iceskate sharpening gear also. Got the Wetstone my father used 40 years ago, and took a knife that used to be real sharp, like long ago. Lots of dents in there. I even fell once on my bare foot. blood shot out, but the cut was real clean. I was thinking on letting it sharpend till i saw your video.
    It's real schap again, paper no problem, but i will put some more time in the movement. thx!!

  • @foodie8790
    @foodie8790 4 роки тому

    love it, but what do you do with the restored knives?

  • @jimgriffin8754
    @jimgriffin8754 5 років тому

    nice job

  • @mrskiing
    @mrskiing 5 років тому

    Interesting video. Would ove to get that knife

  • @monaamelia
    @monaamelia 2 роки тому

    What kind stone you like to use for mirror finishing? I got some knife with rust that need to be clean

  • @Pandaman416
    @Pandaman416 2 роки тому

    love the work how do you come across these rusty and damaged kitchen knives do people send them to you

  • @GearMashers
    @GearMashers 5 років тому

    Sweet video. Your audio is really good as well. Maybe you should do a few videos on what you're using for Youtubing.

  • @bluecrabsandsushi2
    @bluecrabsandsushi2 5 років тому

    Is that just the white #2 series? Not surprising. You could get it to look like that in a rainy weekend. It's also super easy to work with. I totally reprofiled one into a pretty darn nice knife.

  • @CraYzJake1
    @CraYzJake1 3 роки тому

    Is there a link for the knife handle replacements? Or where I might be able to find damaged knives to learn to repair with?

  • @tiagovirago
    @tiagovirago 5 років тому

    I think I read that tojiro handles are replaceable in japan but are glued for overseas sales. I guess they replace handles more frequently.

  • @ilusaosemlimite
    @ilusaosemlimite 5 років тому

    LOVE YOOOOOUUUUU!!!

  • @dylanhall6355
    @dylanhall6355 5 років тому

    How would you say that Tojiro knives compare to Shun? And do you know what sort of Rockwell they’re rated at?

  • @jamesmiller2342
    @jamesmiller2342 5 років тому

    I saw a video long time ago on handles someone gave you, did you ever use them? Also I am curious on your sharpening technique. While back you use to wipe off the slurry off the stones. This video showing you keep the slurry on the stones while sharpening, Is there a reason for this ?

  • @MP_Single_Coil
    @MP_Single_Coil 5 років тому +1

    Riki, you should get a 2x72" belt grinder to do repairs with.

  • @cjgauthier9246
    @cjgauthier9246 3 роки тому +1

    Hi Ryky
    You do some outstanding work. Where do you get the broken, damaged and returned knives from? I am wanting to try my hand a restoration and/or repair.
    Thanks

    • @redangrybird7564
      @redangrybird7564 2 роки тому +1

      He works for a company named "Cutlery and More", and gets the rejects from them.

  • @deondeanadams2447
    @deondeanadams2447 4 роки тому

    Hi RIcky question what is the steel on that knife is it white or blue carbon steel and is the atoma better than DMT Diamond course plate .Regards Dean from Oz

  • @edwardjocson6365
    @edwardjocson6365 5 років тому

    i realy love your video channel i hope in the future you will give me some of your old knife like you video restoration one of your fan 😍😍😍😍😍

  • @franciscoquinones1937
    @franciscoquinones1937 5 років тому +1

    I normally do any reprofiling with a belt or disk sander. After that I rebevel the knife with the belt, and finish the sahrpening with stones.

  • @misterk1420
    @misterk1420 5 років тому

    Nice work! But you'll want to do the tang inside the handle as well. Looks like the rust has spread into it.

  • @jeffsmith8958
    @jeffsmith8958 5 років тому

    Just restored a very very old natural sharpening stone my grandfather had on his workbench. Some research shows it’s from the 1930’s or before it was in bad shape. Probably weighs 4lbs. Atoma 140 did the job eventually to make it usable on all sides but man it was a lot of work. Stone is super hard but not terribly slow and it’s really quite fine. Don’t know grit wise but 800 at least.

  • @SolomonKane71
    @SolomonKane71 4 роки тому

    What is the box that you are sharpening in? That looks like a good way to keep things clean if you do not have a sink or a stone pond.

    • @redangrybird7564
      @redangrybird7564 2 роки тому

      He makes those trays and sells them in his website.

  • @danielemansilla
    @danielemansilla 3 місяці тому

    V.good job

  • @davistaishi
    @davistaishi 5 років тому

    How did you get those knives?

  • @steveogle8942
    @steveogle8942 2 роки тому

    I have one to restore as well. Just ordered some erasers from you.

  • @johnsonmao8589
    @johnsonmao8589 5 років тому

    Lovely just really wnat to know where I could get those small rocks to clean the knife with I'm Satu in south africa

    • @TheAndreArtus
      @TheAndreArtus 4 роки тому

      Try kitchensamurai dot coza, I got Naniwa rust erasers from there. Look under "water stones" category.

  • @nancylor6106
    @nancylor6106 5 років тому

    Hi there. Just wondering if you ever came across a knife brand called Sabun. Haven’t seen any reviews about the knife either. Would be nice if you can do a review.

  • @casewhite5048
    @casewhite5048 5 років тому

    Cool maybe do something with the waterjet channel they want to get into knife making

  • @TehLexx
    @TehLexx 5 років тому

    I would have used totally different tooling for this whole process but the knife looks great.

    • @Burrfection
      @Burrfection  5 років тому +2

      always use what you have, and there is never one way of doing things.

  • @miguelbass5241
    @miguelbass5241 Рік тому

    Where do you buy vintage knives/ knifes for restoring??

  • @leonardwells9613
    @leonardwells9613 5 років тому +1

    You must be planning something special for April Fools Day also, Sharpening.com folks are good at humor, but you’re the best.

    • @pjo1964
      @pjo1964 5 років тому

      He can do a video about how a dollar store knife beat a $300 knife 😂

  • @JohnDoe-yt9kw
    @JohnDoe-yt9kw 5 років тому

    You've got small/medium hands like me - how can you use the wa handle? I just can't seem to get a good pinch grip going on a wa handle, with no taper on the bolster like western handles. I've actually got a BEAUTIFUL Sakai Takayuki that I am probably going to sell, just because the wa handle is too thick/wide for me. I've also considered thinning the bolster, but I don't want to screw up the knife, lol.

  • @neilcastro836
    @neilcastro836 2 роки тому

    Beautifully done Ricky, now i see how to use those erasers. Even thought this video of yours is 2 years old, i bought those erasers the moment you advertised them in your channel and have had them for a long time. Now i know how to properly use them after watching this video of yours. Thanks a lot also Ricky for showing how you restore a broken knife with those diamond plates. What grit do you recommend i use in order to remove a deep chip in a knife i was trying to fix. I managed to bring it down but it still needs work and i think s diamond plate is more suitable for the job. I have a 400/1000 grit diamond plate I've been using to remove chips. By the way Ricky what fluid are you using on the plate?

    • @Burrfection
      @Burrfection  2 роки тому

      i use the Atoma 140 store.burrfection.com/collections/accessories/products/atoma-diamond-sharpener?variant=31877635407968,
      400 grit is too fine for chip removal, or it would take too long

    • @MotivatedMetalworks
      @MotivatedMetalworks Рік тому

      ​@@Burrfection How would your approach change if this was a single edge grind?

  • @valebliz
    @valebliz 5 років тому +1

    I think you should have ground the spine to fix the tip, going to a santoku like shape. Would have made more sense and would have kept the knife slimmer behind the edge.

  • @benjaminjackson4922
    @benjaminjackson4922 4 роки тому

    Was this knife single beveled?

  • @redapproves1330
    @redapproves1330 5 років тому

    Therapeutic and relaxing to watch. Now to find me a rusty blade.

  • @kevinu.k.7042
    @kevinu.k.7042 4 роки тому

    Nice - Adding - I'm surprised you didn't use a buffing wheel (mounted) and some polishing compound to put a polish on the blade. For those who dislike scratches on their beautiful knives just a minute each side and the blade looks new. But you must know about this from visiting knife makers?

  • @jacobejameson
    @jacobejameson Рік тому

    Where do you get the rust erasers??!

  • @PlayMF88
    @PlayMF88 5 років тому

    I love your videos and I have learned alot! but why not have some light music in between ? :D

    • @pjo1964
      @pjo1964 5 років тому

      If he played some light music it would ruin the ASMR!!! 😮

  • @osomxl
    @osomxl 5 років тому +1

    Have you ever thought about using a file to remove material faster?

  • @paolobuffa6889
    @paolobuffa6889 5 років тому

    And thanks also for the end-use test: heroic ordeal with onions ...

  • @osoeduardo
    @osoeduardo 5 років тому

    What is the lenght of both knives?

  • @barretharms6948
    @barretharms6948 3 роки тому

    My only suggestion is that you should lay down a 200 grit to start with.

  • @davidlerer5680
    @davidlerer5680 3 роки тому

    at 3:30 you can actually hear him start to cry from removing the kurouchi finish :'( i would be sad too

  • @b-radg916
    @b-radg916 5 років тому +1

    Looks great, Ryky! Question(s): a) Did you consider shaving down from the spine rather than up from the edge, and b) would you ever use a file rather than a stone in the early going?

    • @Burrfection
      @Burrfection  5 років тому

      you could, but the drop of the spine at the tip could have looked too..... exaggerated.

    • @b-radg916
      @b-radg916 5 років тому +1

      Burrfection: Sure, you'd want to blend the curve of the spine gradually, probably starting back about as far as you did on the edge. I just think this would change the edge profile less.

    • @b-radg916
      @b-radg916 5 років тому +1

      Burrfection: How about using a file?

    • @chrismadsen5946
      @chrismadsen5946 5 років тому +2

      Remove from the spine is the less time consuming.
      1. There's almost only soft steel
      2. Don't have to thin the edge and reprofile the hard steel
      3. The kuro uchi finish i more or less removed and won't be noticed.

    • @Burrfection
      @Burrfection  5 років тому +2

      i'm not an expert, and i when i was looking at the work needed, and considering the missing tip, and the multiple chips running along the entire edge, it made more sense to grind down the cutting edge.

  • @birdturgler88
    @birdturgler88 5 років тому

    I have a really cool old Japanese knife I found at a thrift store. I’m not sure what the story is with it but I can tell that the steel is very high quality. Would you be interested in restoring it?

  • @barretharms6948
    @barretharms6948 3 роки тому

    Is going to be a long time before I watched you sharpen another knife I'll bet you do pretty good on sushi blades

  • @batkovan
    @batkovan 3 роки тому

    oven cleaner and then if necessary steel wool does remove rust also wd40 with cloth does the job to.

  • @zeuqramjj2002
    @zeuqramjj2002 3 роки тому +1

    I would have removed steel from the spine.

  • @pappywith4
    @pappywith4 5 років тому

    Looking for some guidance ! I need a stone for finishing my straight razor do you have recommendations
    I have a 6000 but need to go higher to get that high polish to cut hair instead of plucking hair! Lol

    • @timothylarson3583
      @timothylarson3583 5 років тому +1

      I have a 12k, that wasn't enough for me to finish a single shave with. Instead I have gone to PSA Lapping film in 1 micron and 0.3 micron. Only use edge trailing on the film and it should last. The film I mounted on some marble tiles that I flattened with diamond stones, but many use a piece of glass for a shelf.

    • @timothylarson3583
      @timothylarson3583 5 років тому +2

      Also a strop is a real good idea

  • @UmarRosyad
    @UmarRosyad 5 років тому +1

    I think the video it's pretty much done at 4:18

    • @sanctufilms
      @sanctufilms 5 років тому +1

      Not even close. Must watch with patience and a desire to know.

    • @pjo1964
      @pjo1964 5 років тому +1

      Only your opinion. Everyone has a different interest and a different patience level and desire to watch.

    • @UmarRosyad
      @UmarRosyad 2 роки тому +1

      @@pjo1964 Of course.. The video is just rust removal in my opinion, that "broken" tip is unnecessary to "fix" for my kitchen work.
      My Gyuto was dropped from table height and snaped/chipped on the tip about 5mm, I haven't fix it till now haha. No single effect on it cutting performance

  • @gotja
    @gotja 5 років тому

    rust on the tang under the wa?

  • @wyliecoyote1
    @wyliecoyote1 Рік тому

    That knife brand is called TOJIRO knives, from Japan. note: I don't know anything about it, not a pro just offering a comment.

  • @Tenekai
    @Tenekai 5 років тому

    without a fine finish, there are millions of microscopic crevices that will allow for more rust to form incredibly easily.
    It's not just aesthetic, a fine finish means there is less surface area where oxidation can occur.

  • @DarkAK2
    @DarkAK2 3 роки тому

    How is the handle in such good condition? Usually the handle is the first to go in japanese knives since its made from soft wood

  • @danoj77
    @danoj77 5 років тому +1

    Wouldn't it be better to remove the spine near the tip down to the blade instead of the blade up to the spine? That way you keep a more original blade shape.

  • @TonyEisenhower
    @TonyEisenhower 5 років тому +1

    Hi Ryky. Love your channel bud. I’ve learned a lot from you and have really honed my technique at sharpening with my 2 Choseras. My friends and family love me😄. I like the black basin you are using here to contain the mess. Can ya tell me where I can get one. Thanks.
    Tony

    • @Burrfection
      @Burrfection  5 років тому +2

      i made my myself with a custom made carbon fiber plate and custom silicon moulding..... maybe i'll make some more

    • @TonyEisenhower
      @TonyEisenhower 5 років тому

      Wow! Impressive bud, you’re a handy guy😄 BTW, I grew up in Sac. Thanks for the vids.

  • @olivernielsen2669
    @olivernielsen2669 5 років тому +8

    Where do you get the knives from? Are they your own, or do you buy them on a market?

    • @MasterCrambY
      @MasterCrambY 5 років тому

      i would also like to know

    • @baseballhunter42
      @baseballhunter42 5 років тому +3

      Doubt it was his and got that bad, unless intentional. Ebay might be a place to check if you're looking.

    • @olivernielsen2669
      @olivernielsen2669 5 років тому

      @@baseballhunter42 thanks I'll look

    • @pjo1964
      @pjo1964 5 років тому

      He would never allow a knife to get rusted like that so you know he got it from somebody.

  • @deondeanadams2447
    @deondeanadams2447 5 років тому

    Hi Ricky why does vinegar kill the rust Regards Dean from oz

    • @Sismodium
      @Sismodium 5 років тому

      Agent 58 diluted vinegar is a weak acid, so it weakens the chemical bonds holding the rust particles to the clean steel underneath.

  • @lordofgonzo
    @lordofgonzo 5 років тому

    Did it come with a 70/30 bevel, or are you just giving it one? Or is the camera angle just screwing with me?

  • @mickkeim4142
    @mickkeim4142 5 років тому

    Would a diamond stone take off the edge more quickly?