3 hours for me. Could not have assembled the table in three hours without this video. I made a couple of mistakes, but they weren't Hayneedle's fault. Manufacturer's printed instructions with an "exploded" view were not real clear. The manufacturer's instructions should include a link to this UA-cam page. Find a large, preferably padded/carpeted place to assemble this desk as you will need to tip it on its side and work on it upside down at times. Keep the nuts/bolts/parts marked and separated to keep your sanity. Use rubbing alcohol to take off extra adhesive from sticker/s. It came out beautifully thanks to your help.
Thank you so much for your help. I've saw a lot of other assembly videos for this desk, but this is the only one truely helpful. I've could have done without you guys but it would took a loooong time to achieve what we can do with your help.
So thankful for this video. Still took a while but made things much easier to understand. About 2.5-3 hours over two days and a few glasses of wine but much better than trying to muddle through instruction booklet. Thank you!!
I had to do everything with very little space on carpet. Took me about 5 hours total spanning 2 days. The manual was such a hassle, I had to interpret a lot of things by how they looked together. Wish I would have seen this video earlier. Any advice on how to get the warning sticker off the bottom right of glass?
I've been wanting to buy this table for a while already, and today I almost bought at the Blick in Pasadena, but I was worried about the assembly procedure... so I searched here on UA-cam on how to put it together, until I encountered yours ^_~
My friend, I KNOW WHAT YOUR ARE FEELING. This table has been sitting here for days unfinished, due to horrible instructions. I had to contact customer service, which was almost as much of a pain as building the table itself, in order to replace one of the parts because the holes were drilled in the incorrect place. I would have saved hours if I did not find this vid just now. I also HATE this sticker. Customer service told me there was no way to remove it, absolutely ridiculous...
many years later this is still coming in so handy, thank you for providing this super clear video!
This video saved me a lot of profanity!!! Thanks!!
I really admire how fast and clear it is to follow this video... now I'm looking forward to finally get my futura table =D
3 hours for me. Could not have assembled the table in three hours without this video. I made a couple of mistakes, but they weren't Hayneedle's fault. Manufacturer's printed instructions with an "exploded" view were not real clear. The manufacturer's instructions should include a link to this UA-cam page. Find a large, preferably padded/carpeted place to assemble this desk as you will need to tip it on its side and work on it upside down at times. Keep the nuts/bolts/parts marked and separated to keep your sanity. Use rubbing alcohol to take off extra adhesive from sticker/s. It came out beautifully thanks to your help.
Thank you so much for your help. I've saw a lot of other assembly videos for this desk, but this is the only one truely helpful. I've could have done without you guys but it would took a loooong time to achieve what we can do with your help.
So thankful for this video. Still took a while but made things much easier to understand. About 2.5-3 hours over two days and a few glasses of wine but much better than trying to muddle through instruction booklet. Thank you!!
Thank you for saving my life!
We are very pleased to hear that, Jenny! Enjoy your drafting table.
Thanks for this video, although it took me several hours, it came out beautifully and with much less errors with your help.
Thank you men you just made my life so easy
Is there a parallel straightedge that can be attached to this table?
I had to do everything with very little space on carpet. Took me about 5 hours total spanning 2 days. The manual was such a hassle, I had to interpret a lot of things by how they looked together. Wish I would have seen this video earlier.
Any advice on how to get the warning sticker off the bottom right of glass?
Thank you so much for providing this assembly video!!! This has helped me out tremendously!
Thank you! Instructions weren't so helpful. I'm glad I found this video before anything drastic happened.
this video was so useful. thanks so much. it came out beautiful!!!!
Thanks for the video...it helped me when I got stuck on step 4. It was so much easier after watching... :)
I LOVED IT
Looks very good quality but I wish I could just buy the top section above the legs so I could place it on an existing desk.
I've been wanting to buy this table for a while already, and today I almost bought at the Blick in Pasadena, but I was worried about the assembly procedure... so I searched here on UA-cam on how to put it together, until I encountered yours ^_~
I favored this video for when I get mine ^v^
My friend, I KNOW WHAT YOUR ARE FEELING. This table has been sitting here for days unfinished, due to horrible instructions. I had to contact customer service, which was almost as much of a pain as building the table itself, in order to replace one of the parts because the holes were drilled in the incorrect place. I would have saved hours if I did not find this vid just now. I also HATE this sticker. Customer service told me there was no way to remove it, absolutely ridiculous...
This video helped me out soo much thanks
you switched one of the pieces around midway through so that the holes are on the right side...now I have to redo mine...
Man, I wonder which genius decided to use all different size and types of fasteners.
My table wouldn't go all the way down
Thank u
I got stuck on step 5 and 6.
I'm stuck at 3:44-4:15......... Why do they make this Sh*t difficult.
This guy talks the way Johnny Cash sings
what the actual F*&%k! there should honestly be a rec for magnetic tools. none of these damn screws go where they are supposed to go