Leaving the old ways, a great work has been done with a new thinking, which is really beautiful and also eco-friendly as there is no or almost no use of water, sand, cement or gravel in it.
Very good and informative for beginners who want to do something with this type of panel. Thanks for your efforts on making video on this. I like your explaining style also in which there is no hurry and showoff like other commercial videos and it is going to help for first time user. Thank you once again
What is the rate per square feet sir, great work, may be wall putti applied inside the wall area sir, kindly share the builder details ,I am interested to make like in Coimbatore
Hey @kalaakaar-in Team. Nice informative video. Can you please tell me how to hang photo frames on bison partition wall. Can i use nails or i have to drill screws? Or there is anything else we can do.
@@dayakarreddy7174 You have to apply on both sides. There will be hollow space in between the outer and inner panel where you can stuff rockwool that will increase the energy efficiency of your house.
One question sir . Our old home was made up of soil it is old construction now we developing new construction on that old home means we building two rooms and a open terrace where we using pillars and bison....does this bison is safe and handle the heavy weight?is it safe to construct on old construction
Great... This is future of individual small houses. May i give one suggestion? The panels which you want to paint, first give one or two coatings before fixing. This will same time, paint quantity, improve quality of paint and equally important is during ceiling painting, printer eyes are not exposed to paint drops falling in eyes...
Great video , I have a question... Can these pannels be used on brik wall instead of plastering ill just get a board and stick it up against the wall using cement ?
You can use the bison panel above the normal brick wall but just make sure that you are using low thickness one and you have to drill it on the brick wall. I would prefer that you get the help of knowledgeable technician so that he can help you
It will not work since every brick differs slightly in dimension. You can easily notice that one side of brick wall looks uneven while the other side looks even. Mason cannot make both side of brick wall completely flat and even. That's why plaster is done to hide the unevenness of the wall. If you directly put bison boards against brick wall, you cannot match the joints precisely.
After your video i plan to do for room partition do you think it's a good idea? Because we built the home in normal brick and cements.. when I contact the agent they said they use only 6mm steel instead of Iron Pipe.. will it survive? Also how much mm Sheet needed for room partition. Any Idea please?
It's not 100% waterproof as its made out of cement and wood, neither of which are waterproof. However, cement soaks water slowly. So it won't remain damp for long unless you get heavy rains for multiple days at a stretch. It is recommended to paint the panels to increase their longevity like you do with typical cement plastered walls.
This is my dream, when I build a new house I'll try it if possible in Mizoram , for exterior wall how many design u have? I really love it because can be use for flooring also, if we used for floor,did needed hard wood floors carpet? In the video, you used steel for foundation I hope it will rash earlier
Great work sir.. planning my own fiber board construction… learned a lot,having a few doubts,hope you can help with them 1) how plumbing can be done in a fiber cement board , will the screws hold the pipes when water flows through? 2) the risk of electrical discharge? Any protective measures? 3) in case of a mezzanine floor will there be any vibrations , even with tiles ?.. Thank you.😊
1. We do it outside the home. Not inside the walls. 2. The house is grounded and also the MCB trips. Also we run the wires outside the walls in conduit. We did not try to cut the steel and keep the wires inside. 3. If you have enough supporting steel then the floor does not vibrate. And after tiles it becomes heavy that vibrations are reduced even more.
Wow Congratulation you are the first tiny house builder from INdia I know of in UA-cam. India needs tiny houses actually more than any other country And the tiny houses in USA are such a big joke. They call 850 squarefeet as tiny house. IN INdia that is the standard size of 2 bedroom flats in highly populated cities. BTW you did not mention the price of each sheet. Could you share the current prices. I wish you were in my city the @@#$#@ Interiro decorates refuse to use BIson Sheets they say it works out the same as plywood. I knew it was 40rs per Sqft. And a cheap and decent quality ply is not less than 60 rupees and then you have to put 60 ruppes or say 40 rupees cheap laminated and then pay the carpenter 120 per sqft labour. I wanted to make dry wall in my office with This Boards on MS Frame and use PINE wood style laminated MDF for the desk which was hanging on MS frame and use the pine and gray of the Board as a color combination and just put a sealant on the board to reduce the cost. It would have been over in 3 lakhs or less but In my city a 1000 square feet carpet office will not be ready for less than 10 laksh and cheapest is 7 lakhs. But my interior decorator just kept lying that this plywood will cost the same and then the end bill was 9 lakhs even though we gave him a budget of 5 lakhs and he was earlier very open wanted to do something differnt but then he decided to fleece us. First he said he will give us wooden flooring in 5 lakhs which was doable as this would have easily finished in less than 3 lakhs. Best part these boards are sound proof. Please share the current cost of thes boards 8x10 or square feet wise and per MM. My friend in bangalore is opening a small restaurant I want to advise him to use Bison panel but even there the carpenters and even the dealers are saying that Bison and Ply there is no difference in cost. I find that hard to believe.
Exposes Iron rusts, the bison panel where it's been cut will absorb water. This seems like a build for 8-9 years. Why not build conventional style using brick, cement, iron? 🤔
Bricks and cement became conventional only in the past 30yrs. Before that it was mud. Now in the future it will be all steel. Bison panel does not absorb water as is. But to be safe we will fill the gaps with epoxy and white cement and later oil paint it too.
Leaving the old ways, a great work has been done with a new thinking, which is really beautiful and also eco-friendly as there is no or almost no use of water, sand, cement or gravel in it.
Ya... It's good idea.. and low budget for PPL.. and easy to build good job
Lai Bhari Dada❤️💐.... Very informative and properly cover all the details...👍
Sir thankyou for time u took to explain Neat and clearly , it's a good idea and Good Job done sir .. 👏👏👏👏👏👏👏👏👍👌💖
Very nice! Looking at different wall applications so this was helpful.
Glad you enjoyed it!
Very good informative video. I am going to use the same Bison panel to construct my shop in front of my home. Thank you for sharing your work
Glad it was helpful!
Amazing ,. I am so happy to see your home 🏠 it's a new idea 💡 which is inspiring all.
Thank you so much. Its been exactly one year living in this space and we feel happy.
Very good and informative for beginners who want to do something with this type of panel. Thanks for your efforts on making video on this. I like your explaining style also in which there is no hurry and showoff like other commercial videos and it is going to help for first time user. Thank you once again
You are most welcome
Contact details please
Nice work, good info for beginners. All the best.
What about strength of walls & finishing of walls using painting
Nice and detailed work..
It's awesome brother good effort and excellent work ✌️✌️
What is the rate per square feet sir, great work, may be wall putti applied inside the wall area sir, kindly share the builder details ,I am interested to make like in Coimbatore
How you provided windows on bison panels. Also is it safe to install bison panel over ground. What about moisture termites etc
Great to see the tiny home!
Thank you
Very nice home video l liked I live in kolhapur Maharashtra I would like to
Make same house of bison panels
hi sir is it possible to make wash room on baison board floor?
Yes it’s possible. You have stick tiles on top of it.
Hey @kalaakaar-in Team. Nice informative video. Can you please tell me how to hang photo frames on bison partition wall. Can i use nails or i have to drill screws? Or there is anything else we can do.
Using nails will crack. So please use screws directly like how you use in wood. This will work
@@Kalaakaar-in Thank you for the answer.
Excellent explanation good idea
Hi sir Does 6mm is ok for dry wall partition? On both sides with GI chanel?
How both sides of wall have bison panel ....you installed bison wall panel only from inside
Me too same query. Whether panel board applied both side of wall inside and outside?
OR only outside of wall?
@@dayakarreddy7174 You have to apply on both sides. There will be hollow space in between the outer and inner panel where you can stuff rockwool that will increase the energy efficiency of your house.
Are these 10’x4’ sheets?
8x4 sheets
One question sir . Our old home was made up of soil it is old construction now we developing new construction on that old home means we building two rooms and a open terrace where we using pillars and bison....does this bison is safe and handle the heavy weight?is it safe to construct on old construction
What putty did you put for the gaps between the sheets? Which company?
What will b the total cost to construct on roof
For wall do you put on both sides to cover the iron structure?
Yes. I added insulation inside and put sheets on both sides.
@@Kalaakaar-in 👌
comparing to cement sheets which is heavier?
Cement sheet is heavier than Bison Panel
Very nice information it’s very nice job buck up sir.
So nice of you
Very very good done, economic i like it because i am civil engineer i know value of your efforts you have taken. Total cost hiw you pay.
Do you work in West Bengal?
What about roof? Which materials used for roof?
Puff Panels
Great... This is future of individual small houses. May i give one suggestion?
The panels which you want to paint, first give one or two coatings before fixing. This will same time, paint quantity, improve quality of paint and equally important is during ceiling painting, printer eyes are not exposed to paint drops falling in eyes...
Thanks for the tips!
Nice work, can i use bison board as a roof? Can we put tiles over them and what about its lifetime compared with cement sheet?
Yes you can
Great video. Lots of learning. Cost?
Excellent. ✌️ ❤
Great video , I have a question...
Can these pannels be used on brik wall instead of plastering ill just get a board and stick it up against the wall using cement ?
You can use the bison panel above the normal brick wall but just make sure that you are using low thickness one and you have to drill it on the brick wall.
I would prefer that you get the help of knowledgeable technician so that he can help you
It will not work since every brick differs slightly in dimension. You can easily notice that one side of brick wall looks uneven while the other side looks even. Mason cannot make both side of brick wall completely flat and even. That's why plaster is done to hide the unevenness of the wall. If you directly put bison boards against brick wall, you cannot match the joints precisely.
very nice & informative video
what is weight of panel of side wall (10 mm & 18 mm)??
For the roof can we use bison panels?
Yes you can but with bitumen membrane waterproofing on CBP & shingles to be installed on it .
Which board is best Everest fiber cement board or bison board?
Bison Panel.
hi. What was the costing of the GI Steel Pipes per foot ?
From Where can we purchase pls share
What is the money for this
After your video i plan to do for room partition do you think it's a good idea? Because we built the home in normal brick and cements.. when I contact the agent they said they use only 6mm steel instead of Iron Pipe.. will it survive? Also how much mm Sheet needed for room partition. Any Idea please?
Yes. It is a good idea. Go for it. Entire hospital partitions are done using this sheet. 10mm minimum is good.
It seem to be good. Surely I will struct by this bison board
Yes it is strong and is working well.
Can we call you to do work for our hm
How to order???
Area and total cost?
Plz reply 🙏
It is really nice video;Pls inform the steel Chanel size details.,
I have informed it in the previous video where I make the metal frame
SIR , WHY DID YOU GO FOR POLYESTER PUTTY INSTEAD OF NORMAL PUTTY OR WHITE CEMENT ANY SPECIFIC REASON SIR?
Normal one cracks. It doesn’t stay in the gap
Willing to go for it at our project at Burdwan, W. Bengal. Requesting technical hands to get in touch.
Just go for it sir. With the fabricator you will figure it out. One life. Lets try and see.
I want to replicate in my Himachal Pradesh. Do put such vedios.
Thank you do much. Yes I will keep posting such videos and related videos to give back to the youtube community as I have learnt alot from here.
Simply super
Thank you very much
Very nice.
Than you Sir for your feedback.
Is it waterproof for use as outer walls?
Yes. we have crossed first rainy season. No problem even though its not painted yet.
love this ......
18mm price
When I bought it was around Rs.2100/- per sheet.
nice video friend .....is the panel completely waterproof ?
Yes it is. But a coat of paint will go a long way
It's not 100% waterproof as its made out of cement and wood, neither of which are waterproof. However, cement soaks water slowly. So it won't remain damp for long unless you get heavy rains for multiple days at a stretch. It is recommended to paint the panels to increase their longevity like you do with typical cement plastered walls.
Very Good👍
Do you help build
Please tell us the cost I am really thrilled and interested
This house seems to be the mother tongue of your imagination
This cost me Rs.4L
This is my dream, when I build a new house I'll try it if possible in Mizoram , for exterior wall how many design u have?
I really love it because can be use for flooring also, if we used for floor,did needed hard wood floors carpet?
In the video, you used steel for foundation I hope it will rash earlier
Steel takes atleast 70 years to rust if you have painted properly. On top of bison panel you can do tile work or wooden carpet.
Wonder full
Very nice
No bricks ? Your home looks very peaceful
No bricks. Thank you for your feedback.
Great work sir.. planning my own fiber board construction… learned a lot,having a few doubts,hope you can help with them
1) how plumbing can be done in a fiber cement board , will the screws hold the pipes when water flows through?
2) the risk of electrical discharge? Any protective measures?
3) in case of a mezzanine floor will there be any vibrations , even with tiles ?..
Thank you.😊
1. We do it outside the home. Not inside the walls.
2. The house is grounded and also the MCB trips. Also we run the wires outside the walls in conduit. We did not try to cut the steel and keep the wires inside.
3. If you have enough supporting steel then the floor does not vibrate. And after tiles it becomes heavy that vibrations are reduced even more.
⁹@@Kalaakaar-in
Cost
Of?
Nice video
Thanks
there is no space for expansion, it will crack at joint.
great
What was the total cost of building your house??
4L
Good thank you
Wow Congratulation you are the first tiny house builder from INdia I know of in UA-cam. India needs tiny houses actually more than any other country And the tiny houses in USA are such a big joke. They call 850 squarefeet as tiny house. IN INdia that is the standard size of 2 bedroom flats in highly populated cities.
BTW you did not mention the price of each sheet. Could you share the current prices.
I wish you were in my city the @@#$#@ Interiro decorates refuse to use BIson Sheets they say it works out the same as plywood. I knew it was 40rs per Sqft. And a cheap and decent quality ply is not less than 60 rupees and then you have to put 60 ruppes or say 40 rupees cheap laminated and then pay the carpenter 120 per sqft labour.
I wanted to make dry wall in my office with This Boards on MS Frame and use PINE wood style laminated MDF for the desk which was hanging on MS frame and use the pine and gray of the Board as a color combination and just put a sealant on the board to reduce the cost.
It would have been over in 3 lakhs or less but In my city a 1000 square feet carpet office will not be ready for less than 10 laksh and cheapest is 7 lakhs. But my interior decorator just kept lying that this plywood will cost the same and then the end bill was 9 lakhs even though we gave him a budget of 5 lakhs and he was earlier very open wanted to do something differnt but then he decided to fleece us. First he said he will give us wooden flooring in 5 lakhs which was doable as this would have easily finished in less than 3 lakhs.
Best part these boards are sound proof.
Please share the current cost of thes boards 8x10 or square feet wise and per MM. My friend in bangalore is opening a small restaurant I want to advise him to use Bison panel but even there the carpenters and even the dealers are saying that Bison and Ply there is no difference in cost. I find that hard to believe.
Bison panel would have saved you a lot.
gud job dear
Thank u
nice
Very nice 😂❤
Glad you like it
It's good effort .
Thanks a lot
Good
👍
While screwing the wall instead of 3 people holding it up and wasting manpower, why not use C clamp to hold the sheets to the frame while doing so?
The weight is too much and the clamp can crack the sheet
Exposes Iron rusts, the bison panel where it's been cut will absorb water. This seems like a build for 8-9 years. Why not build conventional style using brick, cement, iron? 🤔
Bricks and cement became conventional only in the past 30yrs. Before that it was mud. Now in the future it will be all steel. Bison panel does not absorb water as is. But to be safe we will fill the gaps with epoxy and white cement and later oil paint it too.
Ye video hindi me hota to jya chalta
Thank you for your feedback. Definately iska hindi video banane ki jaldi koshish karenge.
Ur contact details?
You can reach me via Instagram
Money and time west.low budget low life 10 years after all crack bison sheets.its all temprary work only.
Gr8 point.
Video taking is very poor
I am sorry you feel so. I was working and taking the video too. I know I should have done better job.
Which better bison panel of plywood for the wall??
Bison Panel is a brand. Only NCL is allowed to make.
Which material you used for frame iron and aluminium pipe are there or only iron plz tell
Only Iron pipes. We use 16guage iron pipes.