What is the difference between 9v decoy and a 15v decoy. Any changes in resistance or the ic is different. Coz I I have some extra 9v decoy laying around. But I need 15v to charge my 14.4v battery bank. So is it possible to mod my 9v decoy to output 15v.
you want to use your 21v battery pack and run a PD module using that to power PD capable Devices. I will let you know If i find something good enough for your purpose.
Does it charge and supports with a 18650 battery pack in 4s configuration? It's better to have a 20000 mah powerbank can be charged in 3 hrs and provide 100 watts of Power.
PD capable powerbanks and chargers already have booster chips inside them. its better to trigger the desired voltage natively rather than adding an extra module on top of the powerbank.
I am wanting to use these triggers for devices I dont have a charger for, If I am trying to embed this in a device am I selecting the module that is closest to the voltage listed as the input on the device? I have a laptop that wants 19.5v ~ 2.31a, I would assume a 20v decoy with a decent type c pd wall plug.
Hi, I replaced the laptop battery with a module and a power bank. When I charger my laptop, can this module reverse the current to the power bank to charge the power bank?
if I connect the another one with battery like 18650 can it do power reserve? like the battery can charge phone or output and battery can be charge with charger or input
Can we do this to a laptop. Can I solder compatible laptop dc jack to 15 volt triggere. My laptop comes with 100 watt charger. Can I apply this hack there. Does amps matter in this conversion?? Your getting my point right ??
Does a pd trigger works with a usb-c tester? I have some apple pd charging adaptor to test, I have a usb-c tester but it doesnt have pd trigger built in, if I use something like that but connects to a pd cable to an iphone, will it work?
hi there, i've a question about these triggers, hopefully you can answer it. If the 12V PD trigger board is connected to a source that doesn't support 12V output.. what happens then? does it just stop working, or does it default to a lower voltage (5V perhaps)?
hello Eugene k, 1) the trigger will only work if the source support PD. 2) If the source is PD then it is unlikely that the source would not have support for 12 volts. (I have not seen any PD charger that do support 12 volts.) So, Even if i wanted to test i couldn't test this because all the PD chargers that i have even the cheapest charger, have support for 12 volts. Also, it would not make any sense to Give a USB C port and not put support for at least 12 volts.
what is your powerbank capacity. The 10,000mah version does not support PD. And if you are using the 20,000mah version, make sure you are using a power delivery compatible cable.
I have Xiaomi 33w QC3.0 charger,rated with 5v3A,9v,12v,20v and 11v can I use this to charge my custom made power bank at higher watts using this tiny module
Hi there, I am in need of a PD load trigger to test some charger for extended period of use. Is there such a device? i did find for QC 2.0 and 3.0 but not for Power Delivery.
Can't say. Even i don't have courage to place any order on aliexpress. After since the c0r0na happend and we had a fight with china. I don't think the delivery of good will be as smooth as it was before. However. one of my friend placed an order in recent times the he did receive his package but only after 3 months.
@@gurribuyfor me AliExpress is showing that it "cant deliver to india", can you give me some details of possible, local electronics suppliers like robu in really overprice everything like 2 to 3 times
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Very informative video, still help me after 3yrs of upload 👍
Thank you.
Thanks, i bought this for my 9v router. I'm running my router with a powerbank perfectly.
Where did you get it? I would also want to buy.
@@rahul6535Quartz Components
Thanks so much. Now I can understand this module.
I'm glad it helped.
What is the difference between 9v decoy and a 15v decoy. Any changes in resistance or the ic is different. Coz I I have some extra 9v decoy laying around. But I need 15v to charge my 14.4v battery bank. So is it possible to mod my 9v decoy to output 15v.
Hello bhaiya mera pass samsung ka 25w pd charger ha tho ma ya module use kar a 12v output la saktha hu kya ??
Please reply
Excellent video brother
Very clear and informative. Thanks!
Bhai yah sare Power Bank aur charger mein support Karega
so can these be used with a 12v battery or not?
I used also for power supply a lipo charger that need 16v. It work
Well explained thank you!!!
What if I have 12v adapter, or a 12v battery. I want to get 5V. Should I use trigger board or a dc-dc buck converter?
you should use a usb buck converter.
Where can I buy a PD module capable of delivering 100W which can be directly connected to my battery pack (21v 5amp)?
you want to use your 21v battery pack and run a PD module using that to power PD capable Devices.
I will let you know If i find something good enough for your purpose.
@@gurribuy Sure, that will be very helpful. Thank you so much.
Does it charge and supports with a 18650 battery pack in 4s configuration?
It's better to have a 20000 mah powerbank can be charged in 3 hrs and provide 100 watts of Power.
so this setup is step up the voltage. why dont u just use booster module only? no need that decoy module.
PD capable powerbanks and chargers already have booster chips inside them.
its better to trigger the desired voltage natively rather than adding an extra module on top of the powerbank.
I am wanting to use these triggers for devices I dont have a charger for, If I am trying to embed this in a device am I selecting the module that is closest to the voltage listed as the input on the device? I have a laptop that wants 19.5v ~ 2.31a, I would assume a 20v decoy with a decent type c pd wall plug.
Hi, I replaced the laptop battery with a module and a power bank. When I charger my laptop, can this module reverse the current to the power bank to charge the power bank?
if I connect the another one with battery like 18650 can it do power reserve?
like the battery can charge phone or output and battery can be charge with charger or input
Can we do this to a laptop. Can I solder compatible laptop dc jack to 15 volt triggere. My laptop comes with 100 watt charger. Can I apply this hack there. Does amps matter in this conversion?? Your getting my point right ??
isse buy kaha kare
Does a pd trigger works with a usb-c tester?
I have some apple pd charging adaptor to test, I have a usb-c tester but it doesnt have pd trigger built in, if I use something like that but connects to a pd cable to an iphone, will it work?
hi there, i've a question about these triggers, hopefully you can answer it.
If the 12V PD trigger board is connected to a source that doesn't support 12V output.. what happens then? does it just stop working, or does it default to a lower voltage (5V perhaps)?
hello Eugene k,
1) the trigger will only work if the source support PD.
2) If the source is PD then it is unlikely that the source would not have support for 12 volts.
(I have not seen any PD charger that do support 12 volts.)
So, Even if i wanted to test i couldn't test this because all the PD chargers that i have even the cheapest charger, have support for 12 volts.
Also, it would not make any sense to Give a USB C port and not put support for at least 12 volts.
if u connect 12 v to a source that doesn't support 12v .Ur source board will kharab ho jai gaa
I connect my 12V pd trigger mi 3i power bank and I check output voltage by multimeter, it's showing only 5V...why
what is your powerbank capacity. The 10,000mah version does not support PD.
And if you are using the 20,000mah version, make sure you are using a power delivery compatible cable.
@@gurribuy mi 3i 20000mah, 18watt fast charging power bank. The cable comes with the power bank. can this cable support pd delivery ?
@@ibachan123 NO, power delivery only works on USB C PORT. You will need a usb C to USB C cable.
@@gurribuy thank you so much Sir for clear my doubt.
I think that support quick charge by Qualcomm. Qualcomm quick charge is a different protocol than power delivery
Bhai ye to ab india ke konse website me available hy bro
what is powerbank ?
I have Xiaomi 33w QC3.0 charger,rated with 5v3A,9v,12v,20v and 11v can I use this to charge my custom made power bank at higher watts using this tiny module
Yes but only at 27w.
The 11v 3a will only works on Xiaomi.
Where did you get it? I would also want to buy .
I got it from aliexpress before c0r0n@ happened.
In india it is available but, at a very high price.
Hi there, I am in need of a PD load trigger to test some charger for extended period of use. Is there such a device? i did find for QC 2.0 and 3.0 but not for Power Delivery.
hey dude is there a way to buy from AliExpress (china) in India these days?
Can't say. Even i don't have courage to place any order on aliexpress.
After since the c0r0na happend and we had a fight with china. I don't think the delivery of good will be as smooth as it was before.
However. one of my friend placed an order in recent times the he did receive his package but only after 3 months.
@@gurribuyfor me AliExpress is showing that it "cant deliver to india", can you give me some details of possible, local electronics suppliers like robu in really overprice everything like 2 to 3 times
Bro what's the price
Rs. 150 china.
@@gurribuy from where did you purchased
Sir hindi mein video bnao