The fact you always show your mistakes or oversights os one of the reasons I like your channel. I enjoy watching.You fixing cars. People should give you a break as you are just a dude who likes having a go keep it up mate. 👍
Wow...come on board brov....awesome vlog and hey, 👒 off, you try so hard....looks like proper hard times ⏲️ are waiting for you.....(it's the 🛞 wheel alignment sensor)brov, easy swap out.. and a bit of cheeky adjustment....need to chill and ✔️, the rest....respect
I've a Carly and it tells you specific sides or wheel for abs etc. as for the channel I think it's a luck thing. Just keep pushing out the content. I came for the astra vxr and stayed for the rest. Keep it up
Great video keep up the good work I use autel scanner more but sometimes when working on cars you do need more than one scanner ive 2 autel and a topdon
Nice update don't beat yourself up over missing bits it's all a learning curve I've never repaired a crash damaged car but I've repaired my own car and plenty of mot failure cars from Facebook marketplace as regards to bolts not tighten I usually tighten all the bolts as I go then toque them up on my own car I re check them same bolts again for piece of mind for myself just to check all is good 👍
Just got mine back today failed water pump 😂 we should meet up one day I'm on Birmingham my self think I seen you at work a few times when I worked there but keep doing this content it's brilliant 💙
You have to do you tube because you enjoy doing it. You'll make urself ill if you try and do it to be the next MA. Its a crazily saturated platform... but the fact that your still growing is great! Watched u for a long time! My advice (not that you asked for it 🤣) ... get someone to help u... give away a piece of the pie... get someone to help film. Take that part off your hands so you can concentrate on being you.
Just keep chipping away mate. Consistency is key. When shit goes wrong try not to be to down about it or atleast try not to show it on camera. You'll get there one day 👊
Stop comparing yourself to Mat Armstrong. He's been doing YT for a long time and hasn't just popped out of nowhere, to say otherwise is disingenuous. You can only be you, so just be the best you can be. As someone has said, this is a very saturated part of YT, you're up against a lot of well established people, as well as new to the game but have mechanical experience / garage facilities. You've only been doing this buy and fix for a short time so you're at the very beginning. Have you considered contacting some established channels and getting advice? Might be worthwhile. The worst they can say is no. Good luck.
Problem with this channel is you’re always cutting corners not buying the right parts not replacing parts you should replace just bending them back as straight you say when’s it my time to hit the big time it’s not going to when you keep cutting corners but people like Matt Armstrong did because they put the money in and the job right the first time if you don’t put the money into your cars you’re not gonna get rewards used to enjoy watching your videos but now you struggle to explain what you’re even doing
No, Matt couldn’t get a subframe for the Rolls so he bought a BMW one which wasn’t big enough certain parts on this car and the Subaru like bending the upper support on the Subaru where it need a new one or it will never be right if you want to make it big you just need to come across more confident with what you’re doing it will go a long way trying not to be negative I used to love watching your videos
Mate, grow up get a proper job. Get a low mileage Fiesta like everyone else. You won't earn money from UA-cam
I’ve got a proper job and I dare to dream anything’s possible if you try enough 🫡☝️💪
@andyasdf2078 Yet your here watching the videos you say he should give up making 😆
What a bellend your are mate you probes don't have a proper Job or ever had one
Don’t make money of UA-cam look at the people that have millions from UA-cam ?😴
This guy's clearly jealous 😂🤣 or something 🤔. If you don't like UA-camrs y u watching them. Y u even on the tube altogether??? Seriously 😳
The fact you always show your mistakes or oversights os one of the reasons I like your channel.
I enjoy watching.You fixing cars. People should give you a break as you are just a dude who likes having a go keep it up mate. 👍
Thanks so much 🫡🫡🫡
Wow...come on board brov....awesome vlog and hey, 👒 off, you try so hard....looks like proper hard times ⏲️ are waiting for you.....(it's the 🛞 wheel alignment sensor)brov, easy swap out.. and a bit of cheeky adjustment....need to chill and ✔️, the rest....respect
Thanks matey
I've a Carly and it tells you specific sides or wheel for abs etc. as for the channel I think it's a luck thing. Just keep pushing out the content. I came for the astra vxr and stayed for the rest. Keep it up
Thank you mate 🙌🙌🙌
Great video keep up the good work I use autel scanner more but sometimes when working on cars you do need more than one scanner ive 2 autel and a topdon
One can dream one day mate 🫡🫡🫡
Love your videos pal keep goin and I like that your doing your own way and can't wait to see what car is next
Thanks very much 🙌🙌🙌
Good video getting there buddy, what a legend of a subscriber to help you with the locking wheel key
What a geezer 🙌🙌🙌
Nice update don't beat yourself up over missing bits it's all a learning curve I've never repaired a crash damaged car but I've repaired my own car and plenty of mot failure cars from Facebook marketplace as regards to bolts not tighten I usually tighten all the bolts as I go then toque them up on my own car I re check them same bolts again for piece of mind for myself just to check all is good 👍
Wicked shout cheers man
No problem 😉
Keep doing what you do and enjoy it 13,000 people like it ✌️
That's the plan!
Great video mate. Can tell the effort is going in 👍🏻.
Thanks buddy 🙏
Keep at it mate ,the channel wont be the same without a few quality bodges
I do my best 😂
Your doing a great job with the videos.
I appreciate that! thanks Daniel :)
Abs sensor or abs ring on the wheel bearing it will bring all lights up it's all connected
Just got mine back today failed water pump 😂 we should meet up one day I'm on Birmingham my self think I seen you at work a few times when I worked there but keep doing this content it's brilliant 💙
Sounds good! no probs buddy what colour is your s1
@@JustbeingHayden mine is silver matey
Steering angle fault will be down to your tracking being so far out, get it aligned and clear codes they shouldn’t come back👍🏼
thank you matey yes we shall :)
You have to do you tube because you enjoy doing it. You'll make urself ill if you try and do it to be the next MA. Its a crazily saturated platform... but the fact that your still growing is great! Watched u for a long time!
My advice (not that you asked for it 🤣) ... get someone to help u... give away a piece of the pie... get someone to help film. Take that part off your hands so you can concentrate on being you.
Cheers man
Good video and sound.
Long enough too.
I’ll keeep it up if ya keep watching
Nice video mate, doing a great job.
yes big man :)
VCDS & a laptop is what you need buddy 👍🏻
U got get the alignment done once the steering is out of precision. Always
🙌🙌🙌🙌
Just keep chipping away mate. Consistency is key. When shit goes wrong try not to be to down about it or atleast try not to show it on camera. You'll get there one day 👊
One day son 🙏🙏🙏
drive the car and steering angle sensor should just clear itself.
get wheel alignment done bud an clear fault codes should be good worse scenario steering angle sensor might needs recalibration
🙌🙌🫡🫡🫡
Learning more
sure are mate :)
Have a look at Autel MaxiDas DS808S-TS
I shall man cheers
Stop comparing yourself to Mat Armstrong. He's been doing YT for a long time and hasn't just popped out of nowhere, to say otherwise is disingenuous.
You can only be you, so just be the best you can be.
As someone has said, this is a very saturated part of YT, you're up against a lot of well established people, as well as new to the game but have mechanical experience / garage facilities. You've only been doing this buy and fix for a short time so you're at the very beginning.
Have you considered contacting some established channels and getting advice? Might be worthwhile. The worst they can say is no.
Good luck.
🫡🫡🫡
Headlight brackets are for a pre facelift A1.
I know now haha waiting on new ones
Xtool d7s is OK mate and covers all cars
If your tracking is out it will throw up faults
thanks for the info matey
@@JustbeingHayden your doing well apart from the missing bolt on the sensor 😂😂 keep the vid coming 🤙
@@fromthetoon1602 😂😂😂
vw needs vdcs
🫡🫡🫡🫡
Problem with this channel is you’re always cutting corners not buying the right parts not replacing parts you should replace just bending them back as straight you say when’s it my time to hit the big time it’s not going to when you keep cutting corners but people like Matt Armstrong did because they put the money in and the job right the first time if you don’t put the money into your cars you’re not gonna get rewards used to enjoy watching your videos but now you struggle to explain what you’re even doing
Where have I cut corners man
Didn’t mat but the wrong subframe for the rolls people make mistakes
No, Matt couldn’t get a subframe for the Rolls so he bought a BMW one which wasn’t big enough certain parts on this car and the Subaru like bending the upper support on the Subaru where it need a new one or it will never be right if you want to make it big you just need to come across more confident with what you’re doing it will go a long way trying not to be negative I used to love watching your videos
@john40glos_26 I’ve bought a new front end for the scooby just waiting to weld it in mate 🙌
You need an onlyfans mate
Sure do son