Це відео не доступне.
Перепрошуємо.
Cameo 4 Auto Blade fixed
Вставка
- Опубліковано 18 сер 2024
- Cameo Auto Blade,
Assemble & disassemble Cameo Autoblade
Shopee Material Links:
Premium White Paint : goeco.mobi/FGC...
Wetlook Transparent : goeco.mobi/Xtc...
DIAZO REMOVER ( RECLAIM ) : goeco.mobi/gfY...
DIAZO SF PHOTO EMULSION : goeco.mobi/mrL...
Photo Hardiner : goeco.mobi/pJi...
OPAQUE WHITE BASE : goeco.mobi/3Ss...
TABLE ADHESIVE : goeco.mobi/I0t...
Inkjet Acetate Film : goeco.mobi/kJu...
SUBLIMATION PAPER ROLL : goeco.mobi/i8M...
ECOWHITE Altus SUBLIMATION PAPER A4 : goeco.mobi/cbp...
HANSOL UNIVERSAL DYE INK :goeco.mobi/K0i...
Hansol Universal Pigment Ink : goeco.mobi/Htp...
ECOWHITE Altus SUBLIMATION PAPER A3 : goeco.mobi/gcR...
Silkscreen Mesh - For Waterbased : goeco.mobi/ea0...
Basic Screen Print
Learn How to :
Make Screen Mesh
Make Screen Frame
Make Screen Emulsion
Make Exposure Box
Paano Mag Silks Screen
Paano gumawa ng Emulsion
Paano mag burn ng screen
#gonekprintingave #DigitalprintingPH
Sir pano ausin ung may spring na maliit natangal ko kasi
Can you make a video on the white and red part? Mine won't reset from 0-10 or advance from 1 to 2 to 3, etc. The small spring inside may be wrong.
Me too
Have the same problem. Could you solve it?
Okay, I got it fixed. For all who are also searching for a solution, try this: When the head is disassembled, put on the head part with the red stripes. Here, red markings need to be in the lowest position. The upper part with the slit need to be in the middle position. Put your thumb on top to keep the slit-part in position. It should not move, when you simulate the autoblade adjustment by pressing the lower part (be careful with the blade!). Then, you should see your red marks moving correctly. If not, tilt the upper part (not the one with the slit, the one with red marks), until they are again in the lowest position, slit is in the middle. Try again. If this is working, assemble everything together with the spring and the head cover. Be careful, that the slit is not moving. It need to be in the position fitting with the head cover inside.
Hope, it's not too confusing. Now it's working for me.
@@marros5444 Thanks. Unfortunately I threw the cutter in the trash after hours of trying to figure it out. I'll try this with the next one.
boss
may paraan ba para mapalitan ung blade tip mismo?
kc pagmapurol na ung blade kailangan tlga bumili ng bagong set
hindi kagaya ng cricut
pdeng palitan ung blade tip
Wala boss palit tlga yan sinubukan ko n apati hasain mahirap hahaha d worthy i revive,
Hi sir.good day.ano po dapat gawin kasi yung passes na preferred ko sa pag cut ng cameo ko eh hindi nasusonod..kahit 3 ang passes eh 1 pass lang ang ginagawa nya..baka may idea po kayo.salamat po..
Good morning ang passes po ay times kung ilang beses nya i cucut un design kaya nka default yan ng 1 kc 1time lng nyan i cucut.
@@gonmagno2349 yes po ganun nga po.ang problem lang po kahit naka set sa ng 3 passes..1 parin ang cutting nya kahit naka 3 na..diba po pag naka set na ng 3 ang passes eh dapat 3 times nya i cucut ang design.?kaso hindi 1 time lang kahit naka 3 passes sya..
@@betlagum556 bigyan mo po aq ng idea pano ayaw i cut? Outside lng ba kinacut? Og loob n apart lng ba?. Try to Cut circle tpos sa loob mag lagay ng ng isa pang circle them make compound pat ⭕
pede bang palitan blade sir?
Opo palit n lng kung lalo nat maraming tanggap.
@@gonmagno2349 No i mean hindi sir magpalit ng autoblade. ibig kng sabihin kapag binuksan ang autoblade palitan ang blade sa loob, pede po kaya?
@@spottrader5406 tingin ko boss walang nag bebenta. Special ung Blade nya meron canal para sa lock washer. Na try ko din hasain mahirap ma grip maliit kc and pag balik ng mismong blade sa case marang maluwag na 😂😆
@@gonmagno2349 Salamat po just thinking lang more likely nga hasaain manually pero it will be really a challenge! thanks sir a lot its a very information video that you have there more power
May problema ako sa maliit na spring sa tingin ko mali ang pagkakalagay ko. hindi ito pumasa kapag pinindot ko nang manu-mano upang baguhin ang talim. Maaari mo ba akong tulungan? o kahit na gumawa ng isang video, na magiging interesado sa lahat.
icheck mo pag nilalagay mo ba ung blade sa cameo machine pinepress mo ba ung Lock? Kc kung hindi naka lock un tendency hindi mag auto blade adjust
Normal po ba sa blade na nakalabas ung pinaka point sa butas ng cap?
Opo. Specially pag luma na. Pag bago kc Blade pwd pa curve pa ung ilalim ung sa paligit ng blade pero habang ginagamit mo yan na pupudpod ung paligid nagiging flat kaya nalabang na ung tip ng blade kahit blade 0
Napansin ko po kasi kapag nag cucut na ako nadadamage ung mga decals kasi parang di na umaangat ng maayos ung blade. Like nag kakaroon sya ng guhit sa ibabaw ng decals. Paano po kaya solution dun?
Parang nagagasgas ung decals ng blade habang kinacut nya po.
@@jmborjal8679 pag ngagasan kananat d na quality gawa mo yan na unh time para mg plit ngn blade. Ganyan din kc sakin ung datjng blade2-3 ngyn 5 na at nagagasgas ndin ung mirror decals ko nag papalis na aq
Thank you po sir gon.
kuys paano po ayusin yung may nag pupush back, sana po ma help nyo ako🥺
Boss try no muna manual reset ung, hard press ung cap beside needle.
hindi po kasi nagrereset ng 10 to 0 yung akin🥺
Kung d pa rin nag reset ung Push back spring nyan baka d naka ayos ang position
@@gonmagno2349 boss paano po ang tamang paglagya ng push back spring po. Accidentally na tanggal siya po