Direct Drive VS Belt Drive Electric Skateboard - ONSRA BLACK Carve 3

Поділитися
Вставка
  • Опубліковано 27 гру 2024

КОМЕНТАРІ • 34

  • @BlownMacTruck
    @BlownMacTruck 2 роки тому +16

    Super happy that you’re keeping the direct drive torch going. Not many premades use them anymore which is a giant shame. I don’t know why anyone even bothers with hub motors anymore vs direct.

    • @davidfaustino4476
      @davidfaustino4476 Рік тому

      Reliability. I'd rather not have my weight resting directly on the motor bearings.

    • @BlownMacTruck
      @BlownMacTruck Рік тому

      @@davidfaustino4476 How is weight NOT directly on hub motors? Do you even understand how direct drive works?

  • @nigelyuen
    @nigelyuen 2 роки тому +3

    How many amps are these esc?

  • @BDNB-baddognobiscuit
    @BDNB-baddognobiscuit 2 роки тому +1

    exactly what i was looking for ty!
    Off to order my Carve 3

  • @TLCampbell24
    @TLCampbell24 2 роки тому +1

    How many speed modes does the BC3 Direct Drive have? What are the speed ranges for reach mode?

  • @esk8escape
    @esk8escape 2 роки тому +3

    They're about the same decibels but the high pitched whine of the belts is kind of annoying compared to the direct drive. I'd go DD (because I'm in Florida with no hills). Thanks for the video.

  • @Cesar-cm4if
    @Cesar-cm4if 2 роки тому +1

    Nice vid! I see you use a thousand helmet, do you recommend xnito? I'm thinking about getting one of their helmets

  • @vincentkoegler2820
    @vincentkoegler2820 2 роки тому

    Het i seen you have a bash gaurd on your black carve 3 is it in production now

    • @ONSRA
      @ONSRA  2 роки тому

      Yes they will soon be available 😁

  • @GarethDix
    @GarethDix 2 роки тому +3

    I can’t wait to give the BC3 a go… I’m DD all the way… and although the belt drive is faster up a hill my BC2 DD still accelerated uphill faster than most so it’s incredible what you guys have done so far

    • @ONSRA
      @ONSRA  2 роки тому +1

      In Switzerland we’ll get some boardw very soon. By the end of the month they will be here 😁

  • @Burbs1976
    @Burbs1976 2 роки тому

    I have a BCAT2 for commuting to work and love it

  • @esk8unity
    @esk8unity 2 роки тому +1

    can’t wait! 👏🏼

  • @JohnJaggerJack
    @JohnJaggerJack Рік тому +3

    Belt drives trades simplicity for torque and speed. And torque times speed is also known as power, everybody wants power, no matter the cost.

    • @davidfaustino4476
      @davidfaustino4476 Рік тому +2

      No. You either get more torque or more speed. You aren't making power out of literally nothing.

    • @JohnJaggerJack
      @JohnJaggerJack Рік тому +2

      @@davidfaustino4476 I prefer my opinion over yours.

  • @UnchartedWorlds
    @UnchartedWorlds 6 місяців тому

    I picked DD and it's super silent, I don't hear the motors, and it's super awesome skate Black Carve 3 Pro 😁

  • @ЗаурБитанов
    @ЗаурБитанов 2 роки тому

    Здравствуйте ,у меня 120кг с прямым приводом на подём будет ехать?

  • @r.vandongen32
    @r.vandongen32 Рік тому +3

    Why no ceramic bearings on the Direct Drives? Surely this would greatly improve water resistance. Is this replaceable by the end user himself? You can say, don't ride in the rain but road surfaces can also be moisty from previous rain and there is also the occasional puddle of water you can't avoid.

  • @Nisse977
    @Nisse977 Рік тому

    I wonder if the ESC on these boards gives the same ampere on both boards? Why would the beltdriven board be more powerful then? I have one beltdriven board with an ESC that gives 30A to each motor, and then I have another board (DIY) with 2nd Gen Meepo hubmotors and each hubmotor gets 40A of current from the ESC, I can tell you that the DIY board with hubmotors are way more powerfull then the beltdriven board (Both boards runs on 12S battery). Thats why I wonder if the motors on the boards in this test really get the same power from their ESCs..

    • @davidfaustino4476
      @davidfaustino4476 Рік тому

      You can gear a belt driven board..

    • @Nisse977
      @Nisse977 Рік тому

      @@davidfaustino4476Yes of course, but that was not my question. I asked if the boards in this test use the same ESC with the same current-settings.

  • @siboneyyy
    @siboneyyy Рік тому

    It's beautiful to see how he talks about e-skateboards not allowed in Switzerland and then they go to do a race on a public road xD typical swiss

  • @club_rock
    @club_rock Рік тому

    HELLO ONSRA
    FANTASTIC BRAND
    ONSRA IS THE ESKATES PORSCHE.
    Can you tell me about the Black Carve 2 and 3 AT
    are they 2 IN 1 ???
    Is it possible to set some
    Cloudwheels 120 ???
    Cloudwheels 165 ???
    ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️

    • @ONSRA
      @ONSRA  Рік тому +1

      Hello there, Thanks a lot for the great feedback 🙏🏼 We don't sell Cloudwheels anymore as they made so many problems for us over the past years. We will release our own wheels soon.

    • @club_rock
      @club_rock Рік тому

      @@ONSRA Hello Im french Im in Lausanne university.
      I will buy a Black Carve 2 in may or june. I hope to get a special price as it will not be the Black Carve 3.
      ⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️

    • @ONSRA
      @ONSRA  Рік тому +1

      @@club_rock please check www.onsra.ch we have some special prices on the BC2 right now.

  • @MrPhillipsTheChangeAgent
    @MrPhillipsTheChangeAgent 2 роки тому

    Nice.

  • @kitchengangbe
    @kitchengangbe 6 місяців тому

    ❤❤

  • @rogerdubach7850
    @rogerdubach7850 2 роки тому

    It doesnt make Sense. Normally hubmotors should be more quiet

    • @ONSRA
      @ONSRA  2 роки тому

      The sound is different but when someone drives by it’s just about the same pretty much

    • @LIVITLUVIT
      @LIVITLUVIT 2 роки тому

      Not hubs ..direct drive and they are a lot more quiet ...the main noise was because they tested it going too fast ...a normal skateboard with no motor would be loud going that fast as well ..maybe louder because the wheels ...belts are A LOT LOUDER

    • @MusicByproduct
      @MusicByproduct Рік тому

      When you're riding you practically can't hear the direct drive motors at all. Only the wheels (so noise depends on wheels and road surface).
      Belt and gear drives have a high-pitched whine that is not very loud but it is very noticeable.
      That's why decibels don't tell the whole story. Subjectively it's a big difference, noisy belt vs quiet DD.