BMW E82 135i Oil Filter Housing Gasket DIY | Full Bolt-On Series (Episode 6)
Вставка
- Опубліковано 27 лип 2024
- We found the culprit! The oil filter housing gasket was, in fact, leaking as expected from a BMW with 160K miles. As mentioned in the first episode of this FBO series, a leaking OFHG can be catastrophic in N54/55 motors. We can't emphasize enough the importance of maintenance before going FBO. This was a stressful job and we had our fair share of headache and nightmares while doing this one. But we'd rather have a problematic wrenching over a problematic car. We're one step closer to that FBO state!
Instagram: @drive_wrench_repeat
Spark Plugs & Ignition Coils DIY: • BMW E82 135i Spark Plu...
135i (N55) OFHG Kit: www.fcpeuro.com/products/bmw-...
135i (N55) Coolant Hose: www.fcpeuro.com/products/bmw-...
135i (N55) Aluminum Coolant Hose Flange: www.fcpeuro.com/products/bmw-...
135i (N55) Expansion Tank Hose: www.fcpeuro.com/products/bmw-...
Chapters
00:00 N55 Oil Filter Housing Gasket Issues
0:35 Failure points to note before replacing the OFHG
5:28 Reference our Spark Plugs DIY video to access the OFH
5:42 Required tools & removing the oil cooler hose
8:02 Loosening the intake manifold
9:28 Removing the oil cooler plate
13:04 Clamping the radiator hose
14:17 Removing the oil filter housing and cutting the OFH bolt with a Dremel
16:27 Replacing the oil filter housing gasket
22:00 Reinstalling the oil filter housing
24:05 Reinstalling the oil cooler plate and its gasket
25:35 Putting everything back together (Check List)
----------------------------------
Track: Savannah
Artist: Diviners (feat. Philly K)
Watch: • Diviners - Savannah (f...
----------------------------------
#BMW #E82 #135i #N55 #oilfilterhousinggasket #ofhg #oilfilterhousinggasketdiy #ofhgdiy #fcpeuro #FCP #FBO #M2 #M2Competition #M2C #drivewrenchrepeat #DWR #S55 #alpinewhite #hockenheimsilver - Авто та транспорт
Bring back memories when went through that same job. When oil got in my cooling system and that where it all happen at the gasket. Had to flush my coolant system twice. 3 yrs ago.
You just got recommended to me by the algorithm and I must say you handled that third bolt way better than I did on my E92 335!
Since my purchase of a 2012 135i with 73k miles in late may 2023 i have successfully used and completed 1.valve cover replacement , 2.spark plugs and ignition coils , 3.oil filter housing gasket , 4. pulley and serpentine belt , 5. intercooler and boost pipe and 6. coolant and engine oil change.. This channel is a hidden gem on the internet and the clear videos and parts list made these jobs reasonably easy so Thanks ! Over the winter i plan to do the oil pan gasket wish me luck
That is amazing! Seeing comments like this makes it all worth it for is.
may i ask why repalce the valve cover, I j bought a 2013 w 75k miles and it had the cover done at 50k miles. should I change mine?
@michaelyaghdjian9201 with the low cost difference and the amount of labor required, I decided to change the valve cover ... good thing I did as I broke the original one when removing it ... if you only have 25k on the current one, it should not have to be changed now ... when facing the engine, if no visual signs of oil between the valve cover ( especially on the left ( passenger side )and mating surface are present, you should be good to go
Having the knowledge to stage 2.5 snow performance methanol inject my DCT 135i '12 because of your channel -- keep it up!👍
Great to hear!
Guys keep up the good work & grind, i havent seen anybody explain things better than u. 2023 is yours❤
Thank you Romet!
Very good informative video... thank you. Just a FYI when loosing bolts always go counter clock wise, clock wise to tighten. Just referring to when you mention going upward to loosen the bolt on the OFHG... just imagine a clock and facing the bolt head. Go counter clock wise is to loosen and clockwise is to tighten. Just an easy tactic while doing bolts, nuts etc. Great vid though
Right on man. Righty tighty lefty loosey. But we totally had the orientation confused because the bolt was positioned in a weird way! Monkeys sometimes fall off a tree, haha. I appreciate you pointing this out in the comments for other viewers!
Great video again.
Hey Joseph, Daniel here from DWR. Please send me a DM on IG @dwr_daniel when you see this!
Thanks for this. All of the muttered swearing and emergency use of the Dremel made it very much like my own DIY jobs.
Also, am I crazy or did you guys put out a short video a while back that you were done with the 135?
We definitely wanted to show all the nightmares to be relatable, haha. We're not pro mechanics after all!
We didn't put up a short video, but we are done with the 135i and it's a FBO car now tuned with MHD. We'll be releasing the video of our progression periodically :)
🔥🔥
Hey did anyone run into a problem with coolant leaking from the coolant expansion hose ( at the junction with the radiator hose) afrer replacing it? The expansion hose just kinda fits onto the radiator hose should i tight-wrap it?
You’re actually not suppose to reuse the oil filter housing bolts
Do you think that the clutch will have problems with the torque after the MHD stg 2 tune?
Hey there, sorry about the delayed reply. We had no problem with the clutch after going FBO and tuning. It's been going strong for about a year now after the tune with no problems!
Definitely a wear item so it will suffer from slippage with more than 100+hp. Definitely on the list of things to do. There’s a great option using the 550 clutch kit to answer the additional torque/hp.
@@aidenjoo7262 Thank you!
Sadly soon all combustion cars and trucks including classics will be banned from public streets in entire EU and Scandinavia :-(
In Germany the Green Peoples Party gave order to shorten fuel supply from 2025
on by reducing all conventional fuel stations to only one state operated central gas station per city or county. Car washs will be forbidden too because they are climate killers, now they want to slow down all the gas station pumps from 20 litre per minute to 2 litre per minute...From 2027 on in the EU certain car spare parts will be banned too....as exhaust systems, turbo chargers and even some engine and gearbox oils...California and New York will do the same from 2027 on.... So no investments should be done in oil burning cars any longer....They even created a new kind of crime here, called emissions and smoke crime.!!! (BABVVEN + TEBBVEN & BEFVO laws)!!!!!!!
the GREEN germans will wake up soon with their stupid climate stuff. most of the german people wants to drive a petrol engine :)