stihl fs56rc fs 56 rc trimmer recoil repair pull rope replacement
Вставка
- Опубліковано 12 вер 2024
- stihl pull rope
amzn.to/3jloqEa
if this video helped you donate a buck or two to my GoFundMe account
www.gofundme.c...
The small engine guys are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
thanks man. you really helped me out. 2 shops wanted 80 and your video saved me 80 dollars. i owe you.
No problem 👍
Nice Demonstration. Just as a tip, I usually put a piece of black tape across the spool to help hold the rope in the spool. Leave a long enough tab on it that you can get your needle nose pliers on it and pull it off once you get the spool seated. and secured.
My bottom spring came off and i spent a lot of time trying to get it back on...
at 3:37 exactly i can see how it goes back on correctly. Because of that i was able to repair my pull string (i could figure out the rest)
Thank you so much for this video!!!'
Nice work!
Great job, thanks for making this video! Def helpful as I own a lawn care company! This was a quick fix! Thanks bud
Glad it helped!
I should have watched the whole video first. I got as far as taking the housing off and getting to the spool, but didn't hear the part about being careful not to dislodge the spring on the under side. That was fun to respool...
yep loads of fun
Thanks. Mine ended up having a torque screw instead of a snap ring and mine also has a coil type spring instead of your coiled spring,
slightly different model. probably doesnt have rc at end of model number. older version i think
Thank you just fixed mine!
Glad I could help!
Used this video to get it all together and i followed everything you said but it dont recoil on its own? Got the springs in correctly (looked at my other trimmer to be sure) and its not retracting at all
Thank you very much 🙏
Thanks for your video help me to fix mine.
Glad it helped
Hey nice video but having a problem with mine not recoiling as it should. I can hear the inner spring trying to catch but still no dice 😢
amzn.to/44N1zaE new spring time
-thank you so much!!
You are a god
ive been called many things rarely god
There are 2 or 3 different stihl tools, not sure if the torque ends are different or just some have flat heads.
Always t27 or flathead
Could you let me know how long the pull cord needs to be? Thanks!
@@joshtrotter4878 around 3 feet
Thanks man
No problem
Okay - well I clearly f’d something up - I replaced the pull cord and all seemed good - started up ran for 5 min then something bad happened….. head a snap and machine shut off, found pull handle back 20 feet, took apart again and was like a bird nest in there. Cord all tanged, bottom spring snapped in two and all unsprung, plastic a bit chewed up. Any idea what happened? Maybe clip wasn’t on right so didn’t stay on post.
I couldn't say without looking sorry
Need to replace throttle cable on my fs56rc
YOU ROCK
Thank you
You're welcome
Thanks! I couldn’t get the recoil right..
Glad I could help!
Me too…
It's all in your mind Lil brother so alittle wind not hurting. Doo" dah"
hot in south florida. fan stays.
What tool does it take to remove the Calin to fix the pull rope ?
t27 amzn.to/43bvrM9
Thank you, now to find my tools, lol.
Good luck!
Wind noise is terrible
its a fan. its hot in south florida
Get over it kitty cat. He’s teaching you some things and you wouldn’t be here if you knew how to do it on your own.
Get 👉👌’d buddy.
So like I put a new carburetor on mine it worked for about 3 hours changed heads on it now it want prime up. Bought a new fuel line for tank thinking it was that. Still want start. Use carburetor starter fuel and it runs. So when I'm pumping the bulb there is a lot of bubbles in tank . Can you help.
Fuel lines might be backwards
@@smallengineguys no there are only 2 a black one on top a green one from the tank on the bottom???? I'm wondering if the green one going to the tank is not sitting all the way down?? I'm going to try again after work. I'll let you know. Thanks
make sure fuel filter is actually on the line and it is in the bottom of the tank. but foaming fuel when priming means your pushing air threw the filter. lines are backwards
@@smallengineguys no line aren't backwards. Just didn't have the green one pushed in all the way I guess came home from work and started all over looking at things push on it again. Still wouldn't start so I sprayed started fuel in carburetor and it started I keep it running for about 15 minutes cut some grass turn it off and started again so I guess I fixed it.Ill see tomorrow when i finish cutting grass. Thanks for you input.
Is it easy to fix?
yes
if you just watched the video,you decide... Everyone has a different skill level.
Put one on stihl
My pool card is not catching to crank my motor
bad pawls. its the dog ears inside
worst audio ever.
@@311superfly useless comments