Thanks for your suggestion. Please click this link to continue watching videos without music. ua-cam.com/video/w5KeRcdOBbE/v-deo.html How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview
Hello, Could, should, would you introduce a battery charger to an off grid solar setup with this exact charge controler, so as the generator is on to run the Lawnmower you could take the chance to charge the batteries too, (12v lead acid leisure batteries), especially on the days the sun does not shine. If so, would you disconnect the charge controller? I'd be wanting maximum amps like 6 or 12amps going into the batteries during the 15 mins of grass cutting.
Thanks for your suggestion. Please click this link to continue watching videos without music. ua-cam.com/video/w5KeRcdOBbE/v-deo.html How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview
I had almost the same problem . I've got a sealed battery and the controller settings was on b02(gel) . I couldn't set it more than 12,6 Volt .Once I changed to b01 went to 14.4 Volt. Many thanks! 🙏
When you use these, there's the USB slots that are supposedly for a small load. I had a question about that; does the USB have to be a small load or can it be a small incoming power solar slot also? (There are solar panels that have USB connections). Hope someone can reply to this. Thank you.
The usb is wired so that it outputs the specific 5v, it’s one way since it’s not monitored by the controller. Like you won’t be able to tell how many amps is being used by the device connected to the usb port
The question is How if the landlord leave their home and there is no home's load used while landlords leave their home at all and all batteries is fully charged? Where does the solar panel energy will go or delivered when a daylight time and solar panel within produce the energy condition? Anyone can help to explained to me please?
Hello im trying to find out the same question, I've had my set up for well over 3 years and have it set 2 default and didn't no about the different settings only looking now as upgrading the panels.
I have this . Where does it show the voltage of the battery without a usb device charging? Also when i put a device in the usb output the number always changes and it goes higher .why?
Hi! Thank you for the video! I have the controller, the battery (sealed) and the panel 100W but not the connecting wires. Can someone tell me the specifics for the wires?
I do 4 AWG gauge wires from the battery/s to the charge controller and from the batteries to the inverter (these are high amps/current) and 10-12 AWG gauge from the panel/s to the charge controller. 14 AWG wires from my 4 100W panels get hot at the splice connections aka fire hazard. I've seen these panels push 10A. Think about expansion, too. You may want to add panels and/or batteries like I did, so go with bigass wires as you can afford.
Hi I would like to ask - can I connect controller directly to soler panel and charge usb devices or do I need battery. And Is controller going to show any walues if I connect it directly to solar panel.
It will work....but be careful for excess current . You can use any used /second hand rechargeable battery with correct voltage to remove the flow of electric. If you don't want to use a battery then make sure to remove the panel from sunlight after phones charges.
@@Sam-ij2sd a 12v solar system needs a 12v battery connected to the controller first and then you wire in the panel. You cannot use a basic cheap controller wired to a panel and draw power from it, it simply doesn't work. I don't know why but I have tried it myself and ended up "letting out the magic smoke" which is the term used for frying the controller and witnessing a pop noise followed by a small puff of black smoke. I then had to wait an extra month before I could afford to buy a battery along with a new controller. Lesson learned.
Quick question whenever I connect the battery to the charge controller while the solar is connected the charge controller just turns off how do I fix that issue?
I think solar controller 10 A (not 10Ah) - ver. 10 A ( this for 12v solar panel) can connect 10A x 12V=120 W (solar panel max) - also can connect solar panel 18V but max 120 W solar panel !!!!
Please click this link to continue watching videos without music. ua-cam.com/video/w5KeRcdOBbE/v-deo.html How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview
Annoying overly loud music made the video unwatchable. Probably aimed at 16 year olds. Worse video I have ever listened to. Everyone else thinks the same thing. Please put it back up without music, it’s not even music, it’s like waiting on a call to the dentist, in fact I would rather go to the dentist and have a tooth pulled out.
Please click this link to continue watching videos without music. ua-cam.com/video/w5KeRcdOBbE/v-deo.html How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview
Please click this link to continue watching videos without music. ua-cam.com/video/w5KeRcdOBbE/v-deo.html How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview@@roseymalino9855
Thanks for your suggestion.
Please click this link to continue watching videos without music.
ua-cam.com/video/w5KeRcdOBbE/v-deo.html
How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview
thanks for this short helpful tutorial
Рекомендую. Отличное видео. Очень понятное. Без лишней болтовни и физиономий.
thanks for your recommendations.good luck!
Simple and straightforward
thanks and enjoys!
Good job on vid. The music is rediculously load.
This video might have been helpful, but I stopped it 12 secs in because I'm here for instructions, not a disco.
😂😂😂
❤❤❤❤❤❤❤ the setting wow amazing
Hello,
Could, should, would you introduce a battery charger to an off grid solar setup with this exact charge controler, so as the generator is on to run the Lawnmower you could take the chance to charge the batteries too, (12v lead acid leisure batteries), especially on the days the sun does not shine.
If so, would you disconnect the charge controller?
I'd be wanting maximum amps like 6 or 12amps going into the batteries during the 15 mins of grass cutting.
Could have done without the annoying and distracting music
could also explain the actual menu, like setting the time so that the timer knows when dusk starts
Could also have done without the terrible English translation text-to-voice narration.
Thanks for your suggestion.
Please click this link to continue watching videos without music.
ua-cam.com/video/w5KeRcdOBbE/v-deo.html
How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview
Thanks for your amazing explanation..
Can you please tell me in detail what the function of up and down key is and how to do it?
Hi there!
What setting is for lifepo4 battery?
And what is “strand”? How would I know how many strands is my LIFEPO4 battery?
Thank You!
B04 for lifepo4
If your battery is 12v, then you have 4 strands/string
Thanks! I have it figured out!
👋
So can it charge 24v lifepo4 since its 8strand
@@davidoanning1805
Thanks for the help !
👋
Please I’m making use of 18650 batteries and I also have this type of change control my question is how do I select and know the battery type of 18650
Thanx a Million. I did not know Gel battery was b2. I thought my battery had a problem. Music not so nice
I had almost the same problem . I've got a sealed battery and the controller settings was on b02(gel) . I couldn't set it more than 12,6 Volt .Once I changed to b01 went to 14.4 Volt. Many thanks! 🙏
nice
Pls if i connected two 12v lithium batteries (4strandsx2) what option should i pick?
Can I connect solar charge controller with solar panel without battery and then connect my DC load???
Please reply to my question as soon as possible.
When you use these, there's the USB slots that are supposedly for a small load. I had a question about that; does the USB have to be a small load or can it be a small incoming power solar slot also? (There are solar panels that have USB connections).
Hope someone can reply to this. Thank you.
The usb is wired so that it outputs the specific 5v, it’s one way since it’s not monitored by the controller. Like you won’t be able to tell how many amps is being used by the device connected to the usb port
@noahriding5780 , USB output: 5V/2.5A maximum
There's a lot more to setting it up that you conveniently omitted.
The controller crashes when I plug in a USB cable to charge my phone
I have 250W 36v PV panel and 12V battery. Can be connected?
Which settings is for lead acid
Is the bulb 12v? can i use a car bulb led or something that is 12v?
Hello,bro
The solar controller SY3024H Can be used with solar power plate 210V?
The question is
How if the landlord leave their home and there is no home's load used while landlords leave their home at all and all batteries is fully charged? Where does the solar panel energy will go or delivered when a daylight time and solar panel within produce the energy condition? Anyone can help to explained to me please?
What should i select for AGM battery? Thanks for help.
Hello im trying to find out the same question, I've had my set up for well over 3 years and have it set 2 default and didn't no about the different settings only looking now as upgrading the panels.
can I use this controler for 24 volts solar panel for 12 volts singel battery charge
yes, you can use, the controller are automatically changed the output voltage when contact to the battery. thanks!
I have this . Where does it show the voltage of the battery without a usb device charging? Also when i put a device in the usb output the number always changes and it goes higher .why?
When I plug in a USB cable the controller crashes
Hi man, does it work without battery?!? Meaning inputing both "panel" and "battery" spliting cables from the panel
When the battery is fully charged will the controller stop charging?
Hi! Thank you for the video! I have the controller, the battery (sealed) and the panel 100W but not the connecting wires. Can someone tell me the specifics for the wires?
I do 4 AWG gauge wires from the battery/s to the charge controller and from the batteries to the inverter (these are high amps/current) and 10-12 AWG gauge from the panel/s to the charge controller. 14 AWG wires from my 4 100W panels get hot at the splice connections aka fire hazard. I've seen these panels push 10A. Think about expansion, too. You may want to add panels and/or batteries like I did, so go with bigass wires as you can afford.
why i dont have any voltage on the load output? set on 24h mode and the load icon is on
i don't understand all the lithium settings i.e. 4 strands , 5 strands, what does this mean
it means series connection. For example 4s is four batteries wired in series.
I just installed the very same controller but neither of the USB ports are working. Any ideas on why?
You may need to turn on the "output" by pushing the right hand button.. Icon will show on the display if ON
@@eddyk6853 As a matter of fact, that was the solution. Thanks!
My charge controller just flashes 10.4v and 21.3v repeatedly. None of the buttons do a thing.
Thank you, I thought I might be the only one.
I have 575 watt solar panel wich controller I use??
Hi I would like to ask - can I connect controller directly to soler panel and charge usb devices or do I need battery. And Is controller going to show any walues if I connect it directly to solar panel.
It will work....but be careful for excess current . You can use any used /second hand rechargeable battery with correct voltage to remove the flow of electric. If you don't want to use a battery then make sure to remove the panel from sunlight after phones charges.
Stand by to let the magic smoke out
My controller crashes when I plug in a USB cable. Please help. Thanks
@@barnaclelevi my controller crashes as soon as I plug in a USB cable. Please help me, thanks
@@Sam-ij2sd a 12v solar system needs a 12v battery connected to the controller first and then you wire in the panel. You cannot use a basic cheap controller wired to a panel and draw power from it, it simply doesn't work. I don't know why but I have tried it myself and ended up "letting out the magic smoke" which is the term used for frying the controller and witnessing a pop noise followed by a small puff of black smoke. I then had to wait an extra month before I could afford to buy a battery along with a new controller. Lesson learned.
My solar charge controller is charging, but the battery indicator is empty please what do I do?
I have AGM battery which type should I choose?
is it possible to limit charging current ?
Thanks for the help
what to set when i use a 380W solar pannel and 2 12v batteries ?
What is det Max load for the terminal
I would have enjoyed the video more and learned more, IF the background music wasn't so loud.
which size of cables to connect the solar controller to the battery?
It crashes when I plug in a USB cable to charge my phone
Vai...panel pani diya poriskar korar jonne.. J water nozol pawa jay seigulo ki ache apnar kase?
They do not work IN A HOT ENVIRONMENT ABOVE 85° SCREEN GOES OFF SO YOU HAVE TO PUT IT IN THE GROUND IN THE BATTERY BOX OR SOMETHING😀
Can these lead acid-type solar controllers be used to charge Vtoman or Jackery power stations with internal lithium phosphate (LiFePO4) cells?
I've got a kings version of one of these and can't set the lifepo4 option, but use it on the lead acid setting anyway, seems to work ok
No charge controller is required for Jackery type solar generators. Plug into it, directly from the solar panel. The charge controller is built in.
Make sure you have the right amperage for the battery bank
What is the light voltage output? 5 or 12 volts?
12 volts. The USB ports output 5 volts.
@@unionville533 So I could charge power banks?
@@mackychloe Yes, the USB output can be used to charge power banks that have USB inputs.
@@unionville533 Can it be done direct or do i still need the 12v battery?
Mine only says b 1-3 when changing battery type. What does this mean?
Lead,sealed,gel
@@ioanros6576 Thankyou very much! :)
I have connected the battery, but there is no display . Can you please advise.
Battery 12V - loose contact or buy new :)
Quick question whenever I connect the battery to the charge controller while the solar is connected the charge controller just turns off how do I fix that issue?
Always hook up the battery/s first, then the panels. Opposite when disconnecting, unplug panels 1st, then batteries.
I think solar controller 10 A (not 10Ah) - ver. 10 A ( this for 12v solar panel) can connect 10A x 12V=120 W (solar panel max) - also can connect solar panel 18V but max 120 W solar panel !!!!
good video spoilt by the loud crap elevator music that drowned out the narrative
10a controler 100watts na panel.ano po ang pinakamalaking batery po ang pwede..?
you use just clips to connect the battery - what happens in one clip goes away while the panel is connected? will the controller destroyed?
will turn off, unless you short them nothing should happen to it
manual : 1. disconnect solar panel then 2. connect battery and then panel
Strand type this and that ?? I have lifepo4 what the hell was going to subscribe but what's he talking about? no explanation
can we use this charge controller for DC to water pump?
If its a dc pump yes
i use this controller to a car 12v batterey then a timer to a 12v dc water pump to heat my spa through a water coil .. been good 2 years now
Can i connect my pc to controller to my panel?
put your pc on the roof.
How to adjust for 24v battery
automatic
Can the usb ports be used to charge my powerbank ?
yes
My USB port charges extremely slow. Is there any fix to it
What is the wire used please?
what wire?
Music annoying 😐
Music ain’t needed
I can use cd 70 bike bettery
This controller does not seem to turn on ?? All nice video, just doesn't seem to come alive????
battery might be dead
Annoying Music
Drop the back ground music it's irritating and doesn't help at all.
Possibly the worst ever music when trying to concentrate.
The music is too loud
Please click this link to continue watching videos without music.
ua-cam.com/video/w5KeRcdOBbE/v-deo.html
How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview
UA-cam is trash. It deleted my question 😞. It wasn't spam, but the stupid UA-cam filters thing it is
Contraller
who is know how see Ampere value
Can't i think. If you want to see how much A use a clamp meter
@@THUvidz That only works on AC
what the hell is the battery type?
Lead, agm, gel acid and so on...
@@THUvidz pls I'm using AGM battery what number should I set it is it b1 or b2
b02 gel@@damilolaafolayan1392
All these controllers kill the battery no matter what 🤯
What do you mean? How?
what stupid loud music
Please stop all AI narration
Annoying overly loud music made the video unwatchable. Probably aimed at 16 year olds. Worse video I have ever listened to. Everyone else thinks the same thing. Please put it back up without music, it’s not even music, it’s like waiting on a call to the dentist, in fact I would rather go to the dentist and have a tooth pulled out.
No one would tolerate waiting in the dentist or any waiting room with that racket. It's the type 'music' used for psychological torture.
Please click this link to continue watching videos without music.
ua-cam.com/video/w5KeRcdOBbE/v-deo.html
How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview
Please click this link to continue watching videos without music.
ua-cam.com/video/w5KeRcdOBbE/v-deo.html
How To Setup a Basic Solar Charge Controller | Quick Guide & Menu Overview@@roseymalino9855
Why have you got that ridiculous music so loud, it's ment to be back ground music , it's fighting with the niration 😢 very poor video😢
Shit
the music is very distracting. totally unnecessary.
Don't buy
Hi guys what would a hlb800 AGM be set to ?
Complete JUNK ! Don’t waste your money. Mine both died after 3 months.
How can I reset?My Pwp is flickering yet battery is not full.
My inverter keep switching off when connected to the controler
did you solve this?