For the white one, it is also recommended to change to 17 teeth, because your speed is high enough, but the acceleration gear ratio is not enough, the fan will also be easy to break
Brother I had those exact intermittent slipping issues, I also had that exact clutch bell, it's garbage, I had the black and chrome versions, tried everything, new Polini G3 with blue springs and it was those effing TWH/aliexpress special clutch bells. Put a brand new stock one on and fixed everything.
Dude please do a series explaining more on the gy6 platforms and the older Honda bikes, been screwing with a gy6 for a few years and I really want to get some older 2t bikes and learn to make powerrr
Ur a genius with scooters im battling with cvt transmission at moment on my aerox 100 cc was going 65 70 fitted rs2 technigas exhaust malossi multivar 2000 malossi fly clutch and the bike only hits 7000 rpm yet as before i fitted the parts it was hitting 9000 rpm
I have a polini race 3 clutch ! and I have the spring clutch set from gray - blue and no matter what I adjust them too, they will have a slippage feeling like your bike! I have a high end 77cc build and same thing happens with my clutch.! if you figure it out before I do just holler!
If youre gonna run the 21mm on the zuma i would recomend to get a reinforced crankshaft because they like breaking when tou go with a 21mm (edit:nvm didnt watch till the part when you said youre gonna get a diffrent crank
No they make two different ones lol. They may even make three different ones. But some steering wheels are smaller than others so there two different ones. Usually the trucks are bigger
hey bro wow your elite mine have the same problem with my 50 cc only no pull-up power so if you elite the rest is okay already costumbuild 50 cc mopboyz 4 ever grz from belguim
@@MOPBOYZ I can't wait to see the build you inspired me and I now have 2 mopeds of my own one of them being a prebug. Hope to cross paths one day hit some wheelies🤙
hyped for the future vids man keep up the grind brother !!
Appreciate it
this channel is my favourite now because im into scooters :)
Noti gang checking in 😁my bbk is otw bro imma hopefully be running and back shooting wheelie vids within the month
so you have a full polini setup on the blue bike, so time for a full malossi setup on the red zume ig😛
This is my luck everytime I buy something new for mine lol something else breaks.
u should get a yamaha aerox
The arrow pipe looks sweet 👊🏻
good shit bro, loving the zuma content
For the white one, it is also recommended to change to 17 teeth, because your speed is high enough, but the acceleration gear ratio is not enough, the fan will also be easy to break
Brother I had those exact intermittent slipping issues, I also had that exact clutch bell, it's garbage, I had the black and chrome versions, tried everything, new Polini G3 with blue springs and it was those effing TWH/aliexpress special clutch bells. Put a brand new stock one on and fixed everything.
Dude please do a series explaining more on the gy6 platforms and the older Honda bikes, been screwing with a gy6 for a few years and I really want to get some older 2t bikes and learn to make powerrr
Ur a genius with scooters im battling with cvt transmission at moment on my aerox 100 cc was going 65 70 fitted rs2 technigas exhaust malossi multivar 2000 malossi fly clutch and the bike only hits 7000 rpm yet as before i fitted the parts it was hitting 9000 rpm
My guy got plenty of those fans my dude! Let me know
i need one
@@MOPBOYZ I think I still got your address from last time , I’ll mail it tomorrow
The hole had me thinking. Thought the rod blew
Great video scooter sounds sick
"you gotta hit the duggie before you throw the cover on" haha
Amazon down bad without me😂😂😭
“Start on the Zuma even sooner”
I have a polini race 3 clutch ! and I have the spring clutch set from gray - blue and no matter what I adjust them too, they will have a slippage feeling like your bike! I have a high end 77cc build and same thing happens with my clutch.! if you figure it out before I do just holler!
Man i Love your Videos best UA-camr👌
Notification gangg 💯💯💯
yooo you should try to get a hold of a Gilera Stalker
Best scooter 4 sho
could have been worse buddy could have blown the engine . so sucks it was the fan but awesome it was only the fan . the struggle is real.
You have my scooter 🤤🤤
Can you come to Boston for a ride out
That dog though……🤫
Sounded like your clutch bell on the video
Horizontal motor swap is the way to go on prebugs. Everything else is only sport kit level.
If youre gonna run the 21mm on the zuma i would recomend to get a reinforced crankshaft because they like breaking when tou go with a 21mm (edit:nvm didnt watch till the part when you said youre gonna get a diffrent crank
He should get yasuni c10 or c16. Yasuni r is best for stock cylinders.
will i c u at ferry 2 ferry9?
yessir!
@@MOPBOYZ cant wait to c u. r u bringing more of the moped boyz stickers like you gave peterson? i hella want one!
Ncy makes a aftermarket fan that fits gy6 af16 and zuma125
bro u should have the blue clutch spring in i have det blue ones in and i only have 70 cc
No they make two different ones lol. They may even make three different ones. But some steering wheels are smaller than others so there two different ones. Usually the trucks are bigger
hey bro wow your elite mine have the same problem with my 50 cc only no pull-up power so if you elite the rest is okay already costumbuild 50 cc mopboyz 4 ever grz from belguim
🇧🇪
Hey I have the same scooter except mines black but I need help getting it running again, I would love it if you could help me out..
I want to se zooma ger rebuild pls💪
I hope that is at least 150cc scoot if your using red springs
Where can I find 12 inch wheels?
In Italia si chiama booster spirit
should’ve went with atleast the Yasuni c16 if not the c20
sheeeesh is
the case broken now?
nope just the fan & shrouds a bit
Does anyone know a site where i can buy yamaha bws bcd set of caps they must be able to ship to the Netherlands
Are you using the metro stem on your elite for disk brake and more shock options?? I’m curious
That arrow pipe is nice!!
A1 👍
Are you upgrading the crank or running the stock crank for the prebug?
malossi crank
@@MOPBOYZ I can't wait to see the build you inspired me and I now have 2 mopeds of my own one of them being a prebug. Hope to cross paths one day hit some wheelies🤙
can you get an aerox
Get aerox wheels for it
👍👍💪
You need a bigger carb
his name is booster mbk
not in america, has different names
💯💯💯💯💯🔥🔥🔥🔥🔥🤘🤘🤘🤘💪💪💪💪💪🤙🤙🤙🤙🤙
Soak it in warm water first.
Those zuma oem rims are shit. You should put some yamaha aerox rims on these scooters!
My technique is to not use stupid ass steering wheel covers
Sell me one
$42,069.69
I kinda hate this scooter everyone in my country want one or own one that it became rather annoying to see or hear one
you should get one
@@MOPBOYZ ofcourse,I would want one to feel how fascinating it is for so many to fall for and to not simply judge a book by its cover.
Cheese and rice. Your supposed to soak it in rice for 32 minutes.