How a Variable A/C Compressor Works
Вставка
- Опубліковано 7 вер 2024
- Here is how a variable type air condition compressor works on your car!
The A/C compressor is responsible for compressing gaseous refrigerant in the A/C cycle loop. The refrigerant then condenses into a liquid in the condenser, dried through the dryer and then passed through the evaporator to turn into a gas again (and cool the interior of your car) before being cycled back around to the compressor to start the cycle again.
Depending on air conditioning demand from the HVAC system, the compressor can vary the amount of refrigerant output. This makes it more efficient at cooling, while preventing over freezing of the thermostatic expansion valve.
The variable A/C compressor consists of a variable angle swash plate, that rotates about the central axis. A magnetic clutch engages the A/C compressor to turn with the engine through its accessory belt. As the swash plate rotates, the pistons, connected through connecting rods reciprocate to compress gas refrigerant. The angle of the swash plate is controlled through the pressure differential in top and behind the piston, controlled through an electronically control valve by the HVAC control unit.
Get your air condition refrigerant here:
amzn.to/2WzTHIw (US)
amzn.to/2Uw0Bfd (Canada)
This is the Camera I use:
amzn.to/2Y24ixX (US)
amzn.to/2Yhb3eo (Canada)
Link to Etsy shop where you can purchase speedkar99's brother's socks, t-shirts or hoodies:
www.etsy.com/c...
Check out the speedkar99 Facebook page:
/ speedkar9
Check out the speedkar99 Linkedin page:
/ speedkar99
Follow speedkar9 on Instagram for behind the scenes coverage:
/ speedkar9
Subscribe for more videos just like this:
www.youtube.co...
2:00
UA-camrs: My minimalistic $3k studio setup.
Speedkart: Cardboad on the floor and used boxers.
Yep that's me
As simple as it gets
Great video! I'm working on Denso 7SEU16C, which is a clutchless continuously variable compressor. The compressor shaft is spinning whenever the belt is turning (no clutch!), and a solenoid controls the swash plate angle. Because it doesn't have a clutch, you don't see the compressor engage as you can with the clutch versions, so sometimes the clutchless compressors get replaced because people think the compressor is toast (because they can't get the clutch to engage...but there is no clutch!). These clutchless variables also get overcharged because the gauge display doesn't have the "kick on, kick off" on the low side that you see with regular clutch compressors. So there are a little different. They are found on vehicles that have high-end climate control systems which don't require the driver to constantly change the climate controls (ie, you can set a temperature). The ECU can use engine rpm and all kinds of other info to vary the voltage to the compressor control valve (solenoid) to adjust the swash plate. So with these clutchless variables, you don't even see the engine rpm change when you turn the AC on.
I'm replacing the control valve/solenoid on an old (2003) Denso clutchless variable because the solenoids get intermittent failures as they get older. Great video, and perhaps you can open up a Denso clutchless sometime! The one I'm working on is from an '03 Mercedes ML350, and they were put on a lot of MB's, Lexus, and of course Toyotas.
I know instances where such a compressor has been used with manual climate controls (rotate the heater knob until you feel comfortable type of control) too.
Can you name a couple of vehicles that have this kind of ac comp.
@@RamSharma-90_64 Yes -- I have seen it on 2003 and newer Mercedes Benz's that have the M113 or M112 engine (ML350, ML500, etc), and also BMW's but also some Toyotas. I think they are becoming more popular so we will see them more often.
Good explanation....I am having an issue with 2012 kia optima...low side pressure is high and cabin air is warm....when I rev engine up to 2500 rpms the low pressure drops and air gets cold...I think this is a clutchless compressor and my thinking is the angle plate is not changing because of a faulty solenoid valve....when I rev it up even though the displacement stays the same (barely open small displacement) I at least get some compression/suction because of the speed of the compressor....
@@RamSharma-90_64 Toyota Camry ACV40
Great underwear advise in the quarantine times :D
Very useful when you can't go to the coin laundry
@@speedkar99 hey can you please differenciate between tha AC compressors of the 1980s and the ones from 2020.
@@speedkar99 can i use this for my paintjub?
Pro trick : watch movies on Flixzone. I've been using it for watching lots of of movies lately.
@Lorenzo Andrew Yea, I've been using Flixzone} for years myself =)
You have the EE guy and then you have Speedkar. I prefer seeing tear downs along with the math and science over the whiteboard. Keep it up man.
Thanks. I've experiemented with paper explaination in the past but I feel there's just something about physically taking it apart making it easier to understand
Stumbled into this and had to watch. Brought back memories. Couple things: 1) this is not a variable swashplate, it's a wobble plate. Old GM V5 might have been one of the early variables to have this, but had a tendency to throw itself to full stroke at high rpm because of kinematic imbalance so it would have to declutch. Swashplate variables are much more controlled because they are kinematically balanced (high rpm they want to destroke). 2) control valve controls the stroke by changing crank pressure, not cylinder pressures. Low suction will cause valve open throwing discharge gases into crank and destroking. High suction will cause valve to close opening the crank to suction. There are some other control holes to ensure oil circulates. Non electric valves used a bellows or a diaphragm to sense suction pressure.
thank for sharing,
now i got more idea
This guy is a scientist
Or maybe an archaeologist to discover old technology like this?
Great job on showing the variable compressor internals. Using existing pressures and PCM controlled positioning, is important for DIY’s to know why low pressure switches stop compressor operation completely, protecting the compressor from failure due to loss of oil that ONLY flow with refrigerant. This is done to reduce engine load, increasing fuel economy, like alternator control, power steering 10% on the highway but 90% at slow speed for turning the steering wheel. Pressure switches are more important than ever, as we migrate from R12, R134 now R1234Y or what ever they call it this week.
Please note the clutch coil when de-energized as mutual induction can produce 180 volts requiring a forward biased diode of 1/4 watt facing the positive wire. It can be located at the compressor, 10” up the harness or in a fuse box. Just food for future video if you have access to a labscope set to trigger at any signal above 90 volts.
The same design is used to create hydraulic motors for hydrostatic drive systems but with some manual control of the rotary squash plate to control speed or even reverse. Thanks!
ASE Master Tech since 1978 - Retired
Thanks for your input!
Brother, it's a goddamn shame your videos don't get more views. Everyone I've shown them to is amazed how easy it is to grasp a concept once its broken down, and you do a great job explaining stuff along with videos. Thanks for helping all of us learn!
You are welcome , I hope I get more views soon please share
This is what we call a wobble plate compressor, a swash plate compressor is a little bit different.The ECV regulates the angle of the wobble plate or the swash plate through electromagentic pulms, the bigger the angle the bigger the efficiency of the compressor. This was not a drain screw but it was the overpressure relief valve which usually opens above 30 bar..it helpus understand wether there was an overpressure in the system and protects the a/c compressor at the same time, on the pistons there is a light layer of teflon for friction reduction, good video - now your stuff!
Excellent work here. This is basically an early Calsonic's take at the Harrison V5 comp. They later switched to an even simpler design that yields a smaller and even more efficient compressor, by removing the front nutating plate (actually called a wobble plate) and attaching pistons to the rear plate (the swashplate) by means of hemispherical shoes rather than rods, and that is the CVC (Compact Variable Compressor) compressor equipped on my car (even though mine has a mechanical control valve that doesn't act upon any external input, it just senses both the suction pressure and the discharge pressure and tries to regulate them to optimal values). The dye is not necessarily a sign of diagnosis having been taken on the vehicle's AC; it's usually fitted every time a service is done to better diagnose a leak in case one springs soon after the service. Some OEMs even include it in the factory. Personally, i see enough oil inside to think that the compressor has been ran with a good refrigerant charge most of its life. There's some rust, maybe owner didn't care about replacing the dryer/a DIY kit has been used to "top up" the AC and/or the system has been kept open for some time in its life. 2:55 That's an HPRV valve that pops open whenever discharge pressure becomes too high for some reason. Oil drain bolt is located forwards, towards the front (hex nut at 1:36), in order to aid oil removal. 3:31 Not only the pistons are moving up and down; at that time, they're doing so in the lowest displacement the compressor can attain (as you can better understand at 5:28). Interesting behaviour (and design) because the Harrison V5's mechanism will be doing the exact opposite, i.e. it will be driving the pistons at their maximum displacement in the same condition. That means that the Calsonic compressor has a "softer" start (the control valve, however, soon restores maximum displacement by bleeding the crankcase pressure to the suction side, if required). The CVC compressor in my car has the same perk. Rotate the clutch hub by hand in a summer day and it will get increasingly stiffer to turn as you keep turning it. That's because the plate's angle relative to the shaft is decreasing and the pistons are trying to compress more refrigerant.
Yes
thanx for video, really wanted to hear see something away from that god damn virus.
Yeah alot of people are turning online now, its good to get away from what's going on. That also means I gotta focus more on filming for you all!
That was really cool! I never expected that thing to look like that on the inside.
The variable part of the swash plate was pretty cool !
I am always amazed how every system in a modern car is very complex than the engine itself. I used to think that understanding the ICE engine workings plus the transmission will make me a car guru. Now I am a disilusioned guy.
I'm always learning myself! Amazing how much technology goes into cars...from 20 years ago
WOW. so basically it's like a variable valve lift. what's next? an AC compressor with v-tec.
Lolz.
Oh my God.
@Alex Tarasov Haha literally!!
Good one! this is more like continuously variable piston lift
It's just a simple 6 cylinder compressor with a wobble crankshaft. They have been making these since the 70s.
It works in the same way as a variable displacement hydraulic pump - like that which is used on a excavator.
Good job. Thank you for this crash course on Variable Capacity Solenoid controlled A/C compressors.
Excellent breakdown and video.... Much appreciated👍 The a.c. compressor is basically a mini engine which is why it's best start it BELOW 2000rpm (idle preferred)
Thanks. It's a pump more than an engine, it takes Mechanical energy and turns it into potential energy in the compressed refridgerant
You'll find a lot of compressors which have a fixed displacement switch their clutch on and off continously on the highway to keep the evaporator from freezing up. No matter what rpm the engine is at. Yet they, and their clutches, last for decades if properly maintained. Auto compressors are designed for that. It's larger AC compressors such as bus ones that should never cycle.
@@teravolt6113 The AC compressor on my car is also variable displacement but it has no clutch.
Really terrific explanation of something most of us don't know much about but use every day.
This was an interesting learning experience for me as well
Fantastic and fascinating overview of an A/C system!
Thanks! Glad you appreciate this video
Ah, so that's why at idle the A.C. is not as cool as when I'm cruising along. It operates on the engine Rpm's. Great video. I'm a new subscriber, great channel.
Yes. On the highway when your engine is revving is when you get the best AC
@@speedkar99 thanks. I really like my Elantra. 2018. 2.0 with a manual transmission. I change the synth oil every 4k-4500. The AC is nice once you step on the gas! And the AC makes shifting a little less smooth because it's a pull on the motor.
@@joeb2588 With your compressor this can also be the result of a low refrigerant charge or a faulty compressor control valve
@@teravolt6113 ok. Thanks. It's just not as cold when at idle but as quiet as this engine is and I get over 40mpgs. ...it is not powerful so maybe that could have something to do with it. The car has been very good reliability wise however maybe I'll just have the dealer give it a quick look just in case.
@@speedkar99 not so much because of the rpms on the highway, but more the condensor air flow is high so discharge pressures decline. Condensor effectiveness sets discharge pressure (assuming the correct refrigerant charge). So idle pressures go up, TXV closes to try to keep evap pressures low at low refrigerant flows. Compressor or computer will see the suction pressure increase and increase the stroke on the variable compressor.
Hey brother thanks for vídeo,Very good!!!!I'm from BRAZIL!!!
Hello from Canada.
@@speedkar99 cool Man,If you want to know Brazil you Will be very welcome!!!
That's not an oil drain. It's a pressure relief valve for if the system pressure gets too high.
Yeah he's making too much out of this. It's a basic 6 cylinder compressor with a wobble crankshaft. It's nice to show how one works. I rebuild my first one of these in 1979..
2:25 thanks for tip now i throw away 3/4 of my underwear
you gotta make use of what you have in these hard times!
2:55 it's not a drain port, it's a pressure relief valve.
0:14 that's where the drain port is, right to the hanger.
If your AC breaks because of a leak and you don't plan on fixing it, disconnect the power to it because the clutch will engage in the heat/defrost mode. The compressor can freeze up with no fluid in it.
If the system leaks/breaks, the no/low pressure will prevent the clutch from engaging, kind of a safety measure.
@@pcnepal Mine kept engaging and eventually froze up. Disconnected the power and no more problems. 92 Ford Taurus.
Most likely rust kept the clutch plate spinning with the worn out clutch bearing all the time then the latter eventually froze up . If you still have your compressor, open it up to check. I bet the internal is still intact.
@@pcnepal Thanks. Still need the compressor just for the pulley. When the car finally dies I will check it out.
Sorry, overlooked you said "Disconnected the power and no more problems"
Then a 92 Taurus' a/c system is quite primitive in a sense; it lacks a low pressure switch apparently!
Seems like your brother recently purchased this toothbrush 😂 and underbear
He keeps having to buy new ones if I keep stealing them!
Man! Is there anything you don't know about car maintenance? you're really knowledgeable! 👍
very educative. Thank you regards
You are welcome
Man, don't do messy things like that on your studio. lol
Great video as always.
Yeah A/C work gets messy especially when there's so much dye! My cardboard studio smells like PAG oil now!
I thought I was the only one that used old underpants as shop rags.
Somehow I missed this one. Brilliant summary!
Awesome
Great work mate Thanks! Saves me time taking one apart myself someday. The work that has gone into it is beautiful
Thanks! Hey you can still take one apart too!
“Let me tell you what my brother taught me” this had me dying
Excellent job profesor ! Even though I don't know your name, I think that you are a great teacher and a funny guy as well while making jokes with your brother' underpants! You are a bit faster while explainind Would you mind slowing down please Anyway I have learned a lot from you! Thank you!
Thanks. I try to keep my videos concise to keep retention and interest. Feel free to slow down the playback speed if you need detail
Vidio mudah dimegerti.....thanks all. 👍👍👍good job
Love your videos, you are very knowledgeable and you explain relatively complex things very well, with a bit of humor thrown in. Watched this one in particular because the ac compressor in my son's car has never worked, had it checked and is receiving power, the guy at the shop said it would require a new compressor. It's a 2003 Honda Accord. Was looking at taking it in repair but now I'll buy the part on Amazon and do it myself, I feel confident in doing this now because your video has 'de-mystified' the compressor, it is nothing more than a pump and really relatively simple one (nevertheless a very clever design). Keep up the good work.
Awesome design, thanks for the explanation on how it works.
You are welcome. Very unique indeed
I love the way you fuck with you brother in ur vids
Brotherly love
Besides all the really cool tech infor (I plan to get certified from these videos) but a chance to see the family laundry aired....
Thanks for the humor and entertainment while learning about these complicated subjects.
8 likes
Good sharing
Thanks
Excellent video. Now I know why my 08 Yaris lose 10 horses each time I turn on the AC. Is there such a thing as an all electric AC compressor?
Yes
That must be like being stuck in 2nd gear on your Yaris! I can feel the slight power loss on my V6 cars sometimes. Some hybrid cars have electric compressors. Also think of your home A/C....its powered by electricity too!
The one in my Prius is electric. It runs off the hybrid battery, but like all energy, the power has to come from somewhere. It will still draw tons of power to do its job, also, the Prius compressor/motor assembly is nearly $1000 alone.
It runs off of an inverter and the speed is varied like that..... The newest Prius also uses it as a heat pump so it can be full electric.
Great explanation!
Awesome!
Excellent videos as always but in this one you could have give a brief explaination what it does in car if you have the time
I explained that in the air conditioning loop diagram
on the 4th day is wild 😂 are we still talking about compressors?
Can I replace a fixed compressor with a variable one ? Will it work ? For Honda Civic 2004.
I love the toothbrush and the underpants. That's a really nice idea
It works !
@@speedkar99 Works nicely
Hahaha I love how in your videos you got a different piece of your brother clothing to clean with, that is too funny
I love your videos but I’m sure your brother hates it the way you use his socks, underwear, and toothbrushes. 🤣🤣🤣
Not my problem 😈
More mechanical reviews please! I would LOVE to see you tear down a Fiat/Chrysler product or a money pit like BMW or Mercedes!
I would love to do more mechanical reviews. But the current times isn't a good one to be trading around cars so I'll stick to what I have in house for a little longer
@@speedkar99 That is 100% true and totally understandable!
Thank you SO much for replying to my comment, it is VERY much appreciated!
Keep up the amazing work, I always look forward to content from you!
@@speedkar99 i used to think what the hell does this lad do to buy all of this mechanical crap and make videos stealing toothbrushes and underwears
oh that's cool, the AC compressor is like a Duke Axial Engine or a I call it the "revolver cylinder engine"
Excellent video as usual, thanks
You are welcome!
if its the pressure that controls the angle of the pistons. what creates that pressure in the first place?, the solenoid only controls the amount of pressure coming in or going out, it doesn't create any pressure by itself,
much explanation is needed.
The movement of the pistons create pressure.
The ECU controls how much of that pressure is bypassed to the back side of the piston (and therefore adjusts the swash plate angle). It's a closed loop control system
@@speedkar99
so the pistons themselves create enough pressure to work against it and also output the work needed for air conditioning?, sounds too good to be true fro me, how does the law of thermodynamics play in this??.
@@roosterred7924 The engine is what's nutating (through another rotating plate) the plate that is driving the pistons forwards and backwards and giving the needed work for air conditioning to happen. The pressure gradient between the cylinders and the crankcase, which is what the control valve is able to act upon, is what makes the plate tilt in one direction or the other. There will always be a pressure gradient while the compressor is driven as long as the plates never achieve 90° relative to the compressor shaft. There's no magic involved here.
thanks for this excelent vid , bro.!! I got one of those variable ac and my issue is it constantly turn off and on , i would say every 40 seconds or so , what could be the problem ?
Nice fast pace breakdown. Straight down to business with on boring intro. Good job !
I thought the variable type didn't have a clutch and the shaft is always spinning with the pulley and therefore the workload is controlled with the valve. This compressor seems to have both.
There are cars with both designs. Most manufacturers have added a clutch system with a variable compressor so that if the compressor seizes and fails, it won’t affect the serpentine belt and other accessories.
Good job, very helpful❤❤.
Glad it was helpful!
Another great video,you are are a smart guy.Keep them coming.
Thanks!
You deserve way more subscribers
I wish!
so what is the difference between normal AC compressor? Does magnet clutch on/off self regulates refrigerant pressure? If RPMs are too much - clutch off, if RPM too low - clutch on. I don't see the point except more complex AC compressor and parts which can break.
Clutching on and off is somewhat inefficient, because the pressure is fixed. That would be like flooring your car's gas pedal and then letting off all the way to maintain speed, without variability in between.
@@speedkar99 Thank you for your reply. I just took a look into a different video about vtec AC compressor, the sole purpose of this variable AC compressor was to get rid of magnetic clutch. but it also didnt work, they kept it. Also, my accord's ac compressor, like your in your video, has magnetic clutch and vtec.
Clutch saves your compressor if for some reason you have to drive the car with an empty AC system. It also allows better engine power management with small engines. The Toyota iQ's compressor has both variable displacement and a clutch for this reason.
Another failure (although rare) is that one (or more) of the half ball bearing between the piston and the swash plate moves more than what is permitted and get stuck provoking the compressor to seize and the torque clutch to break (due to the fact that the gap between the half ball bearing and the swash plate increases due to the erosion of the plate which is softer)
Your brother made so many sacrifices so that you may inform us of how cars work.
Yet he doesn't know the value of his contribution...
@@speedkar99 He is a hero to all of us, and so are you!
BTW, seriously, I love your content, thank you and keep up the good work :) !
@@speedkar99 Have the Underpants Gnomes offered you a franchise yet?
00:19 Isn't the high pressure side the smaller one?
Awesome! Very informative. I’m assuming this is what’s in a bmw compressor that doesn’t have a clutch
Yes. No clutch means is variable.
You seemed to be more interested about the underwear use at one point :p
Hehe I was just showing you all what I learned from my brother
I have a question. In cars with variable displacement compressors, it is supposed that the compressor is operating as long as the car motor is rotating. So, what does exactly pressing the AC switch button do in this case?
Engage the clutch
@@speedkar99
I mean in cluchless compressor (variable displacment compressor)
@@alaaomraneg Pressing the AC button (or engaging the defroster) energizes the solenoid in the control valve so that flow changes within the compressor housing and refrigerant begins being drawn away from the crankcase, increasing displacement. The increasing displacement causes a discharge or suction side check valve to open within the compressor housing, and refrigerant actually starts circulating within the AC loop. Turning the AC or defroster off causes the solenoid within the control valve to de-energize, routing refrigerant to the crankcase and increasing its pressure. The aforementioned check valve shuts off as soon as the displacement decreases enough, and refrigerant stops circulating inside the AC loop. The compressor basically gets "short-circuited" and any refrigerant circulation now takes place only within the compressor housing. However, even if the AC and defroster are kept off the climate control unit periodically energizes the control valve in order to circulate some refrigerant and lubricant through the system and to the compressor for a short while, keeping it cool. Displacement never gets 0 since recovering the correct swashplate angle is impossible when the swashplate is 90° relative to the compressor shaft. Hence the check valve.
Good job champ, I’ve never seen one taken apart and I’ve been to auto tech school.
Excelent explanation. Congrats
Thanks
Brilliant explanation. Thank you 👍
Welcome
That's like a VTEC in AC compressor!
Yeah!
I am a bit confused. I thought the VDCs don't use clutches at all.
I am also..may be two types it's not.common sysytem
Not...A variable displacement compressor eliminates the need for a cycling clutch by altering the compressor's volume based on system demands. The system's clutch is left engaged while the system is in use. They are disengaged if there's a problem or shut down.
Clutches have been added to variable compressors to eliminate catastrophic failure if the compressor seizes.
Clutchless compressors use a pulley that has a breakaway mechanism in case of compressor failure. Typically a rubber annular torque cushion that can tear away. Those also reduce noise and vibration. You see them used as clutch springs as well, but they are more expensive than the leaf springs shown on this compressor.
When your AC compressor has more cylinders than your engine xD
Very cool speedkar! Thank you, always watch your videos but particularly this one since I just had my AC serviced as it was leaking at the service ports but they drain the oil and vacuumed it down for the correct charge and I'm guessing they wanted to make sure that there was no moisture in the system. Watching a video like this makes me think of all them parts and how everything comes together to keep my ass cool in the summer!
Thanks for the underwear tips!
Thank my brother for that one lol 😩
Do automobile A/C compressors need crankcase heaters? And if not, why? Thanks!
His brother :wtf my underbear is more greener
Hey it was already green can't blame me
This is really neat: a sort of continuously variable hydraulic transmission. I wonder if this same swash plate system has been used in other settings (in addition to helicopters).
Also: did I miss something? How does the solenoid valve continuously vary the link between the input and output ports? I thought solenoids were usually all on or all off only.
The swash plate system is used in many hydraulic pumps especially in heavy duty industrial applications. A solenoid can be pulse width modulated by the computer therefore making it variable.
dear sir, can 8 get hold of the pdf file which you show inbetween, for better understanding, n280 valve, regards
I wonder what your thoughts on rebuilt ac compressors are.... Or if it's even possible to do it yourself?
Typically the seals are what go bad, if not the clutch. It really has to be done right and pressure tested to make sure it'll last. I would rather toss a used compressor in than rebuild it.
Not worth your time and money. By the time you have all the needed tools you've already spent the money needed for a good quality reman comp, that is if you've managed to successfully reassembly your old compressor. I'd say clutches, externally mounted control valves and o-rings are the most a wise DIYer or shop should deal with. Leave anything else to rebuilders if you don't wanna risk losing money, time and your sanity...
You can make variable swashplate clutchless, but it's dicey. You would have to make the thing spring to a low stroke. Low outside Temps will cause liquid slugging because all of the refrigerant goes liquid. Slugging washes oil out of the compressor straining the dry lubes in the design (coatings, hardened materials on either tin plating or bronze swashplate, etc). I don't know that I would want one. Although lip seals leak and cause clutch failures often. I wonder how well clutchless compressors work in the real world.
TXVs used with these compressors never close all the way, know because i tested some including the one from my car (equipped with a swash plate internally controlled VDC). I guess slugging is taken into design since some slugging is taking place as a small compromise meant to keep oil flowing to the compressor (dissolved in the liquid phase) at very low refrigerant flow rates (what wouldn't happen if the TXV slammed shut at the matching low heat loads). So in general these might tolerate liquid flowback more than fixed displacement comps. Clutchless just suffer a horrible fate when run with no refrigerant, the only thing that can keep them cool and lubed, one of the reasons as for why less and less makers are using them now
thanks for sharing this video.
You are welcome
If pressure of AC compressor not.enough resulted, what is the part to be supposed to replaced..? If, where the parts we can get..? Thanks
Parts store, rockauto, dealership.
great video thanks.
Why these variable displacement compressors are not as durable as fixed displacement compressors?
And what happens when installing fixed displacement in a variable displacement compressor system?
Then the computer can't control the correct pressure for temperature ratio required by the system. It can cause the expansion valve to freeze
@@speedkar99my car is mercedes with cluthless variable displacement from denso 7seu 16...the ac produce cold for about 30 minute then warm /hot....its repeated after lets stop engine about 20 hours and start ac then the same happen ...ive check refrigeran still full...your advice pls what happen with my ac car?..thank you
Superb video!
Thank you
I have one of these exact compressors sitting in my junk pile. May pull it apart before sending it to scrap.
good video .the valve plate has a broken leaf causing a loud banging big end bearing gone sound.
I would think that when the control valve closes, reducing flow, you would want a shorter stroke on your pistons, but it seemed like you were saying the opposite.
I’m looking at wiring a 12V compressor in parallel with a compressor of this style. Would that control valve be closed when the compressor is off? I ask as I am wondering if I need a check valve to prevent this moving backflow while the other compressor starts.
I also ask because finding this type of universal hvac check valve has been a chore, everything’s just hydraulic npt.
Ya brother is pissed @ you bringing out his business in various videos.... keep up the good work and useful info!
I have a Toyota vitz with a variable compressor that works great but a lot of owners have the issue of the compressor failing. Could you make a video explaining why it fails?
If it's the Denso 5SE09 clutchless comp it's likely the refrigerant charge getting too low for proper compressor lubrication when the engine is revved up, or defective control valves that prevent the compressor from turning on
I HAVE 2016 Silverado and my question is how to by pass my solenoid valve ,like the older compressor style? I DONT WANT VARIABLE PRESSURES, ANY WAY TO ELIMINATE THE VALVE?
شكرا لك اخي
Can you make a variable compression Duke engine with this?
Yes but you'd probably have to beef up the seals and connecting rods
Awesome video brother. Always wondered how they work and the added underwear joke was funny
You said that when the freon leaves the evaporator it's a liquid, that's wrong it turns into a gas.
Yes
The expansion valve is calibrated to depress the superheat (i.e. completely stop restricting flow) and flood the evaporator at very low evaporator pressures so that it won't end up interfering with the compressor's control valve (both valves are able to act upon suction pressure, and evaporator temperature is closely related to suction pressure; having both control systems interfere with each other means unsteady vent temperature). So there are times (very low heat loads, mainly running defroster in winter or AC in early spring and 60 F weather) in which the refrigerant leaving the evaporator is actually a mix of liquid and vapor, by design.
I'm replacing the idle bearing the next weekend or so, in addition I'm replacing the low side suction line. Would I benefit taking apart the AC compressor to clean it up and refill it with PAG 46 afterword's? Do you need any other seals? I bought an o-ring kit for the hoses, has about 16 o-rings.
theres that tooth brush. goofy does get attention. I never saw inside of a car a/c compressor before. all those pistons, I never knew.. Thanks for doing this. Remember the wankel rotary? they fit the cycloide in there.
Good stuff
Your the best!!
Great explanation video! Wonder if all manufactures will go to the clutch-less compressors?
Yeah that might be the new norm
No, the newest trend is clutch equipped variable displacement, as in 10th gen Honda Civic. Clutchless causes too much hassle especially when a leaks springs up and the customer doesn't take care of it the right way. Once the system is empty of refrigerant the clutchless compressor basically revs along with no cooling and no proper lubrication at all until it seizes up. Even if AC is kept off. With a clutch, the pressure transducer senses the lower than normal pressure and clutch engagement is forbidden. Not to mention, a clutchless comp running in the lowest displacement still takes away a little power.
@@teravolt6113 thanks for clearing my confusion. I thought this VDCs don't use clutches at all. Now on this video I'm surprised to see a VDC type of a compressor incorporating the old fashion way of clutches.
So is it safe to say not all VDC are clutchless?
@@hlalelemahlaela77 Yes, it is safe. The one on my car is variable displacement but has a clutch too. It is also safe to say that not all variable displacement compressors are electronically controlled (like the one featured in this video is). The one on my car is controlled by a mechanical valve featuring a set of evacuated bellows and a set of springs, instead of a solenoid.
@@teravolt6113 thanks alot from South Africa.
You're the man.👊🏿