THIS IS GOLD. I’m on my first actual embroidery job for a friend and the under stitch was an issue I ran into. I had a few instances where I had “floating” lines and you just fixed that for me! As well as made digitizing much much easier for me thanks so much!!
Thank you for the video it has given me confidence to try to digitize. I have had my embroidery machine for several years now and I ❤️ it. I want to try and digitize key fobs myself. Once again thank you 🥰
Yes you are correct. Sometimes if the design is bigger and it requires a satin Stitch it's optional if you would want to use the under lay Stitch or not depending on your preference.
Thanks so much for sharing your expertise, so grateful ❤️ I have PE Design 8 & can’t upgrade to 10, was told it’s not done anymore but can’t upgrade to 11, sad. Very talented 😊 Thanks.
Thank you. i just bought this program PED 11 and was hating it cause i felt i should have bought the Hatch 2. Now that i found you, I'm liking the program now..
Thank you for this video! You literally solved my problem I can’t believe it was so easy and all the videos out there just make things so complicated to understand🤦🏼♀️ thanks!! 🤞🧡
THANK YOU! I've been trying to find a good tutorial like this, and none have been in great detail.. especially any that I can pay attention to. Not hating on the sweet little old ladies but dang, they cannot hold my attention for long.
Really like this Tutorial video! this is the first video that really helps me to understand how to digitize an image in PE Design. i'm going to try and digitize an image at the end of the week so i'm looking forward to that Thanks for this great tutorial 😀👍
Thanks for the time to make these videos. Very informative 👍🏻I do have some questions. I recently purchased PE Design 10 upgrade version. Upon installation I recieve a message about Must connect a card writer/reader module. I'm hoping you can clear the confusion. What is the best ( card reader module) for me to get for PE Design 10 upgrade version? Also does PE Design 10 upgrade version software work by itself or do I have to purchase another software so that I can use Pe Design 10? If any one else can chime in I would greatly appreciate you all. Thanks a million
I can't contest to that I only have Windows and it's on eBay. The link where I bought it from is no longer available. You have to search for PE design 10
Hi. Is this program difficult for someone who never done this before. I have basic knowledge about ms office and thinking to buy brother embroidery vr for buisness
Thanks for the video ... I have questions though. Were did you get the software? Roughly, how much is it. Will this software automatically save my images taken from on line or my phone automatically as pes for brother machines. I am new to this and really want to do specific things as projects with my family.
@@qualitycustomdesignsllc thanks I saw the ones on ebay but was scared to get it fearing it would be the wrong one bc the prices started at $3 and went up to over 1,000. So I wasn't sure of which to get but I wanted the same as you bc u made me feel like I can do it.
@@qualitycustomdesignsllc also some included brother in the title and others didn't (I have a brother machine) I just want to get the right one is all and not one that won't do the same as yours.
Can you help me with an answer? I have digitized but can't save to. Pes. IT says.. Please jeep all design within the design pager. Save data cannot be sent to the original card or the embroidery machine. I deletel the image.. Please can you help me?
Thanks for the video. But I have problem with creating school logos with shields and anchor or ribbon and sentences like the motto. Can you please do a video on how to create school logos, especially complicated ones, thank you.
@@qualitycustomdesignsllc good question. I’m new to this... so maybe not? I just opened a new image on pe design 10, and exported it as what I thought was a PES file. Is there something I should press before making a design to ensure it’ll be PES?
For the most part just making sure that it was created in a digitizing software and that the software is compatible with PES files. Some digitizing software's are different
@@qualitycustomdesignsllc interesting, ok. Not sure why it’s not working. I’m using both brother products. I’ll just have to rewatch the video and see if I missed something I guess
Great video man, just 2 questions. If I’m using a satin stitch to fill a decently large area should I turn off the underlay or keep it on and only turn it off for stuff like borders. My second question is sometimes when I stitch out the designs it doesn’t fill the colour all the way leaving some blank spots. Any tips on these? Thanks a lot
Satin stitches should be mainly for borders and or lettering. Fill stitch will fill up more area as is in its name. If you keep seeing fabric you have to add density to cover up the gaps and or change Stitch directions as well
@@qualitycustomdesignsllc thanks for the answers. I’ve been embroidering all day (literally 7 hours) and my deigns outline is always off. The artwork comes out good but when it comes to the outlines and border of the whole deign it’s always off. Can you help me out with that?
Yes. But I found a solution. Using an image editor, fill the transparent background with an ugly color that's not used anywhere in the image. Save, open in PE Design, use the import wizard, and when it shows the list of colors in a column, click on the background color so that it gets omitted completely (it will be shown with a cross, and the background will be shown a diagonal cross pattern in the preview).
when i use the shape tool to outline for some reason the line (lighter one) is on the inside of my picture, whereas when you do it the the lighter line is on the outside of the pic your outlining?
What would be most helpful is: First, show how you got your designs in your files (such as scanning an image or however).... Second when you're clicking on particular areas, indicate where (step by step for dummies/ beginners).... Thank you!
Where did y’all go to purchase this software cuz I see plenty of them on eBay but on the brother website it’s not available and I don’t wanna buy the wrong one off eBay or sum can someone please lmk
This is the best video on digitizing the whole process used to seem so overwhelming but now it seems possible. Thank you!
Glad I was able to help
I use bought a machine and it was much more easy in my head then when trying to use software and set up a machine. Videos like this are so valuable.
Thank you so much!! Learning a lot !! I hope you can put up more videos like this! I have pe Design 11
Glad you're learning thank you for watching the video!
Bro bro...thank you... I've been banging my head against the wall listening to all these grandmas...bless them ...but fack. Great tutorial.
Thank you lol
THIS IS GOLD. I’m on my first actual embroidery job for a friend and the under stitch was an issue I ran into. I had a few instances where I had “floating” lines and you just fixed that for me! As well as made digitizing much much easier for me thanks so much!!
Thank you for watching the video I'm glad I was able to help
Thank you for the video it has given me confidence to try to digitize. I have had my embroidery machine for several years now and I ❤️ it. I want to try and digitize key fobs myself. Once again thank you 🥰
I have been searching for hours and researching how to digitize stuff and work with pe 10 and 11 and this helped out a lot. Thanks a ton, brother.
Thanks for watching. Hope I was able to help
Did you buy the program? I was so excited to start embroidering but these softwares are outrageously expensive. Im incredibly disheartened
Yes. Search on ebay they have them for low prices
Great video brother, so under sewing for fill stitch but have under sewing off for zig zag and satin stitch? Is that a good rule?
This is an excellent question, would be great if someone made a video about when to use what stitch's imo
Yes you are correct. Sometimes if the design is bigger and it requires a satin Stitch it's optional if you would want to use the under lay Stitch or not depending on your preference.
@@qualitycustomdesignsllc thanks for taking the time to anwser, love your work
@@HowieSmith-n7e That would be a good video, triple stitch is good for line that run on the inside.
This was a great video thanks for teaching in away that was easy to understand.
Thank you. I'm glad I was able to help you
Needed this have the pe 11 n couldn't figure out the manual punch thank u for your time explaining everything aswell very much appreciated.
No problem
Thanks so much for sharing your expertise, so grateful ❤️
I have PE Design 8 & can’t upgrade to 10, was told it’s not done anymore but can’t upgrade to 11, sad.
Very talented 😊
Thanks.
Thank you!
Excellent tutorial! Embroidery digitizing can be tricky for beginners, and videos like these really help people get started on the right foot.
Np thank you for watching.
The video was very informative. I'm a beginner, so the information was good. I love the Steelers where did you get the steelers image?
Great video!
Thank you. i just bought this program PED 11 and was hating it cause i felt i should have bought the Hatch 2. Now that i found you, I'm liking the program now..
That's great news. It takes some getting use to just have to practice
Where did you buy your design software from
When I saw the Steeler logo, i was hooked. Great job!
Thanks
The best tutorial for a learner like me. Thank you 😊
good work you explain it very well , thanks i learned a lot from u great videos for beginners
Thank you so much
how do you save the info, to be a dst file for the machine ? i dont see any options for that .....anyone ?
I will like to know too
Thank you for this video!
You literally solved my problem I can’t believe it was so easy and all the videos out there just make things so complicated to understand🤦🏼♀️ thanks!! 🤞🧡
You're so welcome glad I could be of service
Would you need to remove overlap on the colours to the background?
If you don’t have no pe design software and you try to purchase pe design 10 or next would it work on your pc or you have to have an older version
That might just depend on the PC. I have had the old version pe design 10 for awhile now.
Hey man this was super helpful so thanks for posting. Any advice on fixing a border thats misaligned with the design?
Thank you for watching. It all depends on your design. If you're creating your own just a some pull compensation to it
hi how do we use the 5x12 jumbo hoop? could you explain how to set it up and use it with pe design. any help would be appreciated
Thank you for sharing this tutorial. It definitely helped resolve some issues for me.
I'm glad I could help
what are you using as back space, undo ??
By clicking the right pad on the mouse
hi, how can you minimize the image? i did what youve done here but its a bit a big file. i cannot fit the design to a 4x4 hoop 😅
How do u get the motify images my if not highlighted for me to do it
THANK YOU! I've been trying to find a good tutorial like this, and none have been in great detail.. especially any that I can pay attention to. Not hating on the sweet little old ladies but dang, they cannot hold my attention for long.
Thank you so much lol and yes of course not trying to hate on anyone we are all learning at the end of the day.
Great tutorial however my modify overlap isn't highlighting how do I get it to show up
Most of it depends on how big or small the images are inside of the previous image you're trying to do the modify overlapping.
Awesome 👏🏼
Thanks
Really like this Tutorial video!
this is the first video that really helps me to understand how to digitize an image in PE Design.
i'm going to try and digitize an image at the end of the week so i'm looking forward to that
Thanks for this great tutorial 😀👍
Great! Good luck!
Benefits of this versus the Auto Punch tool? Thinking of this method because I recently get some white gaps in my embroidery images
Thank you much this really helped me out. Automatic subscribe.
Thank you for watching and subscribing.
@@qualitycustomdesignsllc NP Thank you for helping!
Np
What kind of embroidery machine are you working on?
very useful.thank you.
how did you activate the modify overlap button? mine is like your was at first
Is this just an updated version of pe design plus 2?
Can you input picture to be embroidered or would you have to trace around it all aswell?
This is an old version of PE Design 10. Yes pictures can be embroidered without the trace.
Thanks for the time to make these videos. Very informative 👍🏻I do have some questions. I recently purchased PE Design 10 upgrade version. Upon installation I recieve a message about Must connect a card writer/reader module. I'm hoping you can clear the confusion. What is the best ( card reader module) for me to get for PE Design 10 upgrade version? Also does PE Design 10 upgrade version software work by itself or do I have to purchase another software so that I can use Pe Design 10? If any one else can chime in I would greatly appreciate you all. Thanks a million
Mines never came with card writer and I didnt have to buy another software for the original software to work.
Does pe design work on Mac? And Can you post the link to where you purchased the program. Thank you!
I can't contest to that I only have Windows and it's on eBay. The link where I bought it from is no longer available. You have to search for PE design 10
@@qualitycustomdesignsllc was it one of the cheaper ones? or the $200 ones
@@thefellas2180 cheaper
I noticed you didn’t remove the overlap with the stars and text!?
Hi. Is this program difficult for someone who never done this before. I have basic knowledge about ms office and thinking to buy brother embroidery vr for buisness
Not at all you just have to do research. Whether it be UA-cam and or just browsing the internet if you have trouble with anything
Question how do you digitize an image that is not rounds lets say a cow? lol how would you make the stitching around look good?
Check out my digitizing videos playlist
Hi could you possibly tell me how you upload the digitize file .. to sell ?
Upload to what?
Thanks for the video ... I have questions though. Were did you get the software? Roughly, how much is it. Will this software automatically save my images taken from on line or my phone automatically as pes for brother machines. I am new to this and really want to do specific things as projects with my family.
EBay. Ranges from different prices. You have to select PES files when saving.
@@qualitycustomdesignsllc thanks I saw the ones on ebay but was scared to get it fearing it would be the wrong one bc the prices started at $3 and went up to over 1,000. So I wasn't sure of which to get but I wanted the same as you bc u made me feel like I can do it.
@@qualitycustomdesignsllc also some included brother in the title and others didn't (I have a brother machine) I just want to get the right one is all and not one that won't do the same as yours.
when i complete the shape it looks nothing like yours. Mine looks like a half done patch but yours looks like a full embroided patch. help please
Hi what does it mean if it says unexpected file format when I try to upload my picture?
In my situation what happens is either the file is corrupted which means it's deleted and or the file is formatted incorrectly.
hello,
how did you get so many fonts in your PE Design?
They are defaults that come with the software
Can you help me with an answer? I have digitized but can't save to. Pes. IT says.. Please jeep all design within the design pager. Save data cannot be sent to the original card or the embroidery machine. I deletel the image.. Please can you help me?
Love the video, it just seems like so much. But I want to learn to do my own and having to keep paying for someone else to do it. Thanks again
Thank you so much. It takes time patience is key
Great tutorial! Can you use your own fonts you download to your computer?
Thank you! Yes you can
Also, which video editing soft ware are you using to make this video?
Filmora 9 video editing software
How do u undo or delete wrong curve ?
Right click the mouse button
Thanks for the video. But I have problem with creating school logos with shields and anchor or ribbon and sentences like the motto. Can you please do a video on how to create school logos, especially complicated ones, thank you.
Sure I can I actually created a couple not on camera though so I can make a video
@@qualitycustomdesignsllc Thanks for your response. Okay. Please do the video, I'll be looking forward to it.
This video will help me out so much thank u
I hope so. Thanks for watching
Hey. I made a custom design, exported it as a PES file but my brother se625 won’t read it. Do you have any idea why?
Was it made as a PES file?
@@qualitycustomdesignsllc good question. I’m new to this... so maybe not? I just opened a new image on pe design 10, and exported it as what I thought was a PES file. Is there something I should press before making a design to ensure it’ll be PES?
For the most part just making sure that it was created in a digitizing software and that the software is compatible with PES files. Some digitizing software's are different
@@qualitycustomdesignsllc interesting, ok. Not sure why it’s not working. I’m using both brother products. I’ll just have to rewatch the video and see if I missed something I guess
if putting on usb drive you have to format as fat32 or machine wont read it
How is your stitches so nice and dense ? Mine look separated
Most of it is about density and the rest could be about the color of your bobbin
Is this software compatible with Mac 🖥 ?
From my understanding no. Maybe other software's do.
What version of windows does this work on?
I have windows 10 I can't speak for other versions. It should work for anything new but I can't speak on any older version
@@qualitycustomdesignsllc is this program really 9.99 I thought it was suppose to be 1000
It very well could be if you're looking at eBay. I bought my from their had it for two and a half years now no virus no nothing
@@qualitycustomdesignsllc on eBay I found it for 9.99 i was wondering if it was legit tho
Great video man, just 2 questions. If I’m using a satin stitch to fill a decently large area should I turn off the underlay or keep it on and only turn it off for stuff like borders. My second question is sometimes when I stitch out the designs it doesn’t fill the colour all the way leaving some blank spots. Any tips on these? Thanks a lot
Satin stitches should be mainly for borders and or lettering. Fill stitch will fill up more area as is in its name. If you keep seeing fabric you have to add density to cover up the gaps and or change Stitch directions as well
@@qualitycustomdesignsllc thanks for the answers. I’ve been embroidering all day (literally 7 hours) and my deigns outline is always off. The artwork comes out good but when it comes to the outlines and border of the whole deign it’s always off. Can you help me out with that?
Anyone else having trouble getting transparent images digitized correctly because a black background appears
Yes. But I found a solution. Using an image editor, fill the transparent background with an ugly color that's not used anywhere in the image. Save, open in PE Design, use the import wizard, and when it shows the list of colors in a column, click on the background color so that it gets omitted completely (it will be shown with a cross, and the background will be shown a diagonal cross pattern in the preview).
can you use the brother pe design 10 on a Mac computer?
I dont think so
how to save the picture at the end
You just create a file and save it
@@qualitycustomdesignsllc I can’t the save and save as buttons are not in bold
Appreciate this bro bro
Thanks
when i use the shape tool to outline for some reason the line (lighter one) is on the inside of my picture, whereas when you do it the the lighter line is on the outside of the pic your outlining?
How did you save the image and put it into the pe design 11? I’ve been struggling on that.
The image you want to digitize?
What kind of file does it have to be?
Like what type of file was the steelers logo when you started? Png? Jpg?
It was a png photo from the internet
For some reason my brown gets changed to gray when i upload the image into the program
Ok. Idk why it does that
Why is when I add my text it shows in sewing order as separate pieces?
Thanks Bruh, I subscribed A+
Appreciate it
Thank you
No thank you! Stay blessed
I respect how u don’t hide ur shit like what soft ware you using
Thank you 😊.
Welcome. Hope you enjoy
Woooooooow
What?
Steelers smh
It was something simple to do... lol
thanks bro 🤝
No problem
What would be most helpful is:
First, show how you got your designs in your files (such as scanning an image or however)....
Second when you're clicking on particular areas, indicate where (step by step for dummies/ beginners).... Thank you!
Classes will be coming soon
love the video. Thanks
Thanks for watching
Where did y’all go to purchase this software cuz I see plenty of them on eBay but on the brother website it’s not available and I don’t wanna buy the wrong one off eBay or sum can someone please lmk
I’ve been struggling w this for months tryna find the right one
Ebay
wish me luck - its my first try
can you give me pe-design please