GIXXER 250 | YOSHIMURA Modified Exhaust | Install | Sound Test
Вставка
- Опубліковано 13 лют 2021
- The performance upgrade we've all been waiting for! :)
YOSHIMURA Carbon Muffler tip plus customized elbow / headers for Gixxer 250
PROs:
- weight savings equates to increased acceleration
- better handling
- looks awesome!
- of course, SOUNDS so GOOD!
See how it sounds and how it performs!
Enjoy!!
Subscribe to UA-cam Channel:
/ lonrider
IG:
@thelonrider
#LonRider
#Gixxer250
I hope you enjoyed this installation video. I really loved the output from this project.
Feel free to ask. Suggestions are also welcome 🙂
=================================
Don't forget to SUBSCRIBE so this channel can grow!
ua-cam.com/users/LonRider
Any effect on the engine
Any effect on the engine?
And whats your height bro?
None so far :)
I'm 5'4 :)
"Braaaaaaap" beautiful sound, boss 🔥🔥🔥🔥🔥🔥🔥
Salamat boss! ✌️
Exactly
Solid paps 🔥
Salamat paps ✌️
Perfect sound
Thanks man! 🤟
@@LonRider still running the exhaust till date bro??
Excellent video
Thank you bro!! :)
Solid talaga bossing!!
San nyo nascore yang yoshimura bossing?
@@zero_pain0859 salamat bossing! FB marketplace lang boss, hanap ka na lang ng matripan mo ✌️
Great video covering the entire process. Since it is a full system, did you do an ECU flash ? How much does this exhaust cost ?
Thanks man!
No, haven't done a reflash yet since there's is no available high flow air filter yet. They should go hand in hand for optimum perf.
The exhaust cost more or less $160 :)
@@LonRiderbmc oval fmsa50-660 air filter for 250cc
Salamat sa upload sir
Thank you sa support!! :)
We need more videos of gixxer
I will create more in this channel :)
good sound !! 😀
Thanks bro! You can subscribe to the channel for more content :)
power serrrrr
Werpa!! :)
Nice job, looks great, the only thing I didn't like about the bike was the look of the stock exhaust.
Thanks anyway ✌️
Hey bro! Did u get any mileage issues after this mod? Or any issue at all? I have a SF250 and would like to change my exhaust but a bit skeptical😅
No issues at all! In fact, I got better mileage during long rides due to weight savings. So go for it :)
@@LonRider thanks brother ❤️
La pregunta es si estos cambios ayudan al motor en su relación fuerza y potencia?
Power-to-weight ratio, yes, there's improvement. The catalytic converter from the stock pipe weighs a lot compared to the new one :)
Sir, did u cancel the mid-ship, is it need to cut the stock band pipe? To make full installation exhaust?
The whole exhaust is replaced with a new one✌️
Nice sound paps
Salamat paps! ✌️
Can it be installed on the Vstrom 250 SX that also comes with the same engine and exhaust ?
It should also fit :)
Hi, I could not see on the video, but what happened to your lambda sensor? Did they install it on the new header pipes, or you just removed it?
I'm very interested because I just ordered header pipes from China, and I see that there is a plug for lambda sensor on them.
Hrvoje
Yes, we installed one also on the new headers. Good for you, you have it already :)
pulido paps.good job.idol ko rin mga gixxer tlga..lakas.ride safe paps.
Salamat paps! RS✌️
@@LonRider ♥️✌️
🔥 Love from Bangladesh
I have the 155 cc one
Thanks bro! I also had the 155 version before this one. Both are fantastic bikes :)
@@LonRider My dream - Gixxer 250 FI ABS
KTM Duke 390
Gsx s 1000
But our country has 165cc limitation 😑
Those are nice bikes! Is the limitation due to the license restrictions?
Bro, I was wondering if it's possible to just get a slip on exhaust. I got a naked gixxer too and I'm just not a fan of the look of the stock exhaust tip.
Yes you can, you have to cut the elbow between the tip and the catalytic :)
A question regarding your aftermarket bar-end rear view mirrors. Did you change them because they really provide better view, or just for fancy looks? The reason I ask is that Gixxer 250 mirrors really don't perform well. Probably the worst rear view of any bike I've had so far, and I've had many (big) bikes.
Looks and manueverability during traffic. Stocks are too big and wide :)
@@LonRider OK, I thought so, but are the also performing well. If yes? I'll change mine as well.
Stocks are better (in viewing purposes). Also, the bar ends serves as some kind of lever protection in the event of a crash :)
sound of this motocycle like moto with 1silinder like byson or cbr150, gixxer250 sound not like moto with 2silinder like sound of ninja250 and yamaha R250 ,right??
Gixxer 250 is single cylinder only. So this sounds like other 150cc (ex. Cbr, fz, duke200, etc)
Boss, nice exhaust. How much did it cost you? Is it available online? I want to install it in my SF 250
Thanks bro!! Price is around USD160 total :)
New subscriber 👌 Ganda nung tunog paps. Magkano inabot full system? Ty
Ty paps. 8k total nyan ✌️
I thought i shared pipe with the sf250 or does it not ...
I think its the same. Might be a little different in the header sectiojn of the fairings of SF :)
Did you have yo to tune the ecu?
Not yet, but planning to :)
Did you adjust from the ECU b cos it cant effect performance
Not yet. Yes, Ecu reflash helps. But just changing to a lighter exhaust system gains a lot from weight savings :)
hello, nice bike! is it possible to change the exhaust tip only? without having to remove the whole pipe? for example if I get a 51mm SC project exhaust tip can I easily change it with the stock exhaust or I have to weld it to the pipe?
Thanks man!
You have to cut the tip if you want to keep the catalytic converter. Then you need some adapter between the 51mm canister and the stock pipe from where made the cut✌️
@@LonRider Oh ok, Thanks man! Ride safely :)
@@motoridez7394 Ride safe too ✌️
Hi bro, can you share about the crash slider installation? the slider for gixxer is quite hard to find in the market. Tq
Sorry I don't have a video. My sliders are custom made here in PH 🤟
Planning to buy for touring with obr purposes, sana maka hanap ka ng shortened adjustable clutch and brake levers
Best for touring! Power with very good gas consumption :)
Eto po ang performance nya sa long ride: ua-cam.com/video/oOnZzjPpEw8/v-deo.html
bhai, what is actual millage this time u getting?
I got better mileage after the breakin and this upgrade. You can see it here:
ua-cam.com/video/oOnZzjPpEw8/v-deo.html
Hi , Can you provide link for the exhaust ? Thanks.
Its from a local dealer here in PH
BAGAY SIR!
Salamat sir!! :)
Salamwalaykum...Watching from riyadh ksa i love the bike soon wish to have it..wala pa kasi sa zambianga city to ewan kung kelan magkakaroon ride safe lods
Salamat lods! Balita ko ang ganda ng mga kalsada dyan ah, sarap motorin ✌️
Kahit anong sukat lang ba ng elbow sir tapos yung shop na mismo didiskarte para ma sakto sa gixxer? sf250 kasi sakin
Standard na sukat po dapat (tulad ng sa stock) para hindi maging sungaw :)
Sounds good! Wish the bike culture here was as active as it is there.
Thanks bro! Where you from by the way? 😊
@@LonRider US... New York.
@@kuhndj67 Oh I see. I thought we have same culture, like those harleys group riding out there ✌️
@@LonRider There are Harley's but cruisers aren't for everyone (I'm more interested in sport riding and ADV riding).
@@kuhndj67 Agree. And I'm into sports touring✌️
What's the cam you were using..?
Its GoPro Session :)
If we remove the catylitic converter will it affect engine life in the long run? As catylitic converter is responsible for the perfect air fuel mixture which is sent to the engine ,so on removing the cat con won’t it harm the engine ? Im not an expert on this if you are could you please make a detailed video on it?
It is the ECU that is responsible for the mixture. The catalytic is for the emission :)
@@LonRider Anong ecu pinalit niyo sir?
Bro, does it any effect without catalytic converter?
Or is there any problem?
It still runs smooth so far 🤟
@@LonRider thanks bro...
Bro please tell me whats Your exsoust name & price? If possible give me online link please
It's Yoshimura pipe :)
Did you mount the O2 sensor back into the new Bend pipe ?
Yes, just like the stock pipe :)
@@LonRider oh OK can you share the same picture of it in Instagram ?
I'm having self relay issue is anyone having the same? What to do for that? I'm still wondering when I start my bike it rolled down with the self motor then only my engine come up with the full throttle it took around 5-7 seconds to start my engine
Check your battery if low on power. Also check your spark plug and starter switch if dirty
@@LonRider will give a try but it's new
Does it improves the bike performance?
Yes. Improved acceleration and better handling
Hanep lutong ng tunog sulit yan kahit may silenser paangkas boss haha ride safe
Oo boss sulit talaga! RS din :)
Anu pong bar end mirror ginamit niyo po? Tanung ko po kung maganda po ba yung Moxi 3 piece handle bar po? Balak ko din po sana mag pa tail tidy maganda po ba pag nasa Rear wheel po yung license plate?
Generic bar end lang yan sir sa lazada. Yung moxi ba yung transformer na handle bar? I prefer na walang moving parts sa steering handle. License plate sa baba, depende sa taste mo yan sir. Pero sa tingin ko, dahil sobrang laki ng bagong plates, baka hindi na bumagay :)
@@LonRider Thankyou poo!!
sir sa 155 cc na gixxer na pareho mo na motor ano po kaya ang pinakamalaki na gulong ang kasya sa rear?
180 daw po. Pero donut na. Para sakin sakto lang ang 150/60 :)
Sir Lon yung stock pipe nyo iiwan na lang sa shop?. O binibili nila?
Inuwi ko din po yung stock for future use 🤟
Kailangan pa ba i.tune ang ecu after maglagay ng aftermarket exhaust?
Recommended but not required :)
Kamusta fuel consumption nyo sir? Affected ba since binago yung cat?
Hindi naman po. Kaya pa mag 40kpl during long rides :)
Nakakainlab hahahahaha sanahalls
Salamat boss ✌️
Whats the top speed you have achieved after installing the exhaust
Same. Its the torque/acceleration that's changed :)
Ns200 or gixxer 250 which is the best bro?
For me, it would ve gixxer because of these:
+50cc
Led lights
Dual abs
@@LonRider syempre ang looks din boss. Ganda ng Gixxer 250
Were we will get this full system
You can check out the yoshimura japan website for this exhaust ✌️
Paps paano yung O2 sensor ano ginawa nila nag but as din ba sila paps.
Yes paps may butas. Same sa stock ng FI :)
Mileage in City and in Highway!?
33-35kpl on city. 38-42kpl on highway 🤟
Boss wala pa bang aftermarket na pipe and elbow para sa gixxer 250? Yung plug and play nlng po? Salamat sa tugon. RS
Meron mismo sa Yoshimura Japan website. Compute mo na lang po ang pag import dito :)
@@LonRider podrias pasar el link de compra del exosto?
Ganda ng new exhaust mo sir! Di ba yan mahuhuli or pinagbabawal? Nakak apekto na sa performance pag nag chechange ka ng new exhaust paps? Yung stock exhaust pap binenta mo ba dun sa binilhan mo ng yushimura exhaust?
Dagdag sa performance sir. Binalikan ko yung stock exhaust. Di kayang dalhin pah sa motor✌️
@@LonRider Nice! Like lumakas ang hatak sir? Kala ko kase di na nila eh balik yung stock pwde pala sir hehe
@@seanphilip6991 mas ramdam na ang hatak at arangkada sir 😁 Kinuha ko yung stock just in case na need ko ibalik sa dati ✌️
@@LonRider Nice! Di ba huli sa LTO yan sir? Ganda kasi ng tunog pag bumili nako ng gixxer sf 250 yan gusto kong eh palit sa stock, ang brusko mg tunog kaso baka bawal sa lto paps di nman?
@@seanphilip6991 hindi naman. May silencer naman ito ✌️
Paps may kick start pa ang Gixxer 250?
walang kick start paps :)
Is full system?
Yes full system :)
Magkano pagwa mo elbow with reso paps? Nice talaga! 🤙🏻🔥
Salamat paps! 8k total nyan ✌️
Ganda ng tunog
Salamat sir :)
sir kung magrenew ka ba nang motor mo ok lang ba ganyan yung muffler mo?
Yes. Hindi rin naman nasisita sa mga checkpoints :)
Good day boss, wala po bang pugak? Kahit stock ecu?
Wala naman po boss. Swabeng swabe ✌️
paps ano nilamang ng yoshimura kumpara sa akrapovic? ty.
Not sure po. Di pa ako nakatry ng akra. Pero tingin ko same lang. Tunog/base lang pinagkaiba :)
Wat is the name of that exhaust..?
Yoshimura Carbon finish exhaust pipe
Good
Thanks!! :)
Sir hindi kaba yan huhulihin ng polis sir pag may silenser?
Hindi na po kasi pasok na sa decibel meter :)
how is the performance and comfort ng unit n gamit mo sir?
Superb All-around bike!!
See here: ua-cam.com/video/oOnZzjPpEw8/v-deo.html
Big elbow sir?
standard po :)
What muffler model is this i want ti buy also
Yoshimura R77 :)
@@LonRider where you bought bro
and price
Locally made in the Philippines bro :)
Boss ung parang belly fan Kaya nya sa ilalim Ng makina pwd Kaya sa 150 yan
Tingin ko swak sa gixxer 2020 model. Need lang yata ng bracket :)
Ayos Sir maganda na tunog mas okay sa may silencer, panget naman pag sobrang ingay maiirita ibang tao at may epekto din sa rider mabilis makapagod
Tama sir. Sumasakit din ulo lalo na pag long ride. Mag expirement na lang ako ng iba ibang silencer✌️
With cat removed?
Yes, for weight savings :)
Ganda po.
New subscriber po
Salamat po✌️
sir bat parang tumaas ata idle nya after magpalit ng exhaust?? pano solusyon non
Sa simula lang yun sir, mag aadjust pa ang ECU. At cold start kasi nung nag sound test sa video :)
paps pwedi ba magpashipping nang buong set bohol po loc. pap.
magkanu po kaya.?
Sa seller kasi paps muffler lang. Hahanap ka talaga ng custom elbow for 250 :)
What about CPU? does it legal modifications??
Did you mean ECU? :)
@@LonRider Central Police Unit... Cops... Chalaan to ni katega??
its legal on our area :)
Free flow performance exhausts are legal in their country.
Hi nice video, plis can u show how u install the phone there? thx
Thanks!
Do you mean the cellphone holder?
@@LonRider that would be dope, pls 🙏 also do you happens to have the link of where to buy that exhaust system??
How much cost bro I want to Change???
Its 8000 Philippine Peso :)
@@LonRider how much in dollars??
Is gixxer suitable for touring
Yes, it's best for touring. See details here:
ua-cam.com/video/oOnZzjPpEw8/v-deo.html
@@LonRider being a 250 gixxer owner, I will suggest you that gixxer is great for touring.. buy the SF version.. you need to modify the seats
@@suranjangupta9439 well i thought the naked version is better for touring than the sf version?
Oxygen sensor po nka lagay parin po ba?
Yes po, meron din tulad ng sa stock :)
Sir silencer name plz replay
The silencer comes with exhaust itself :)
Boss tanong ko lang po ksi balak ko sana mag pa full exhaust system sa gixxer ko. Yung sa yo ba boss is hindi umi.ilaw ang fi? kasi may oxygen sensor kasi yan sa elbow. yung bago mong kinabit is may socket para sa oxygen sensor?
Yes, may socket din itong bago. Alam na yan sa mga muffler shop.
Sa una lang umilaw, mag-aadjust dapat yun after few minutes then mawawala na :)
@@LonRider thanks boss sana lumaki yung channel mo Good Bless.
No problems paps! Thank you din!
Ride Safe! :)
kuys, magkano pagawa ng ganyang elbow with resonator? para po my idea ako pag bumili online. salamat.
2500 po pagawa ko nuon 🤟
Paps meron pa ba 250cc na available sa mga motor dealers?
Madalang paps. Kahit SF wala pa ako nakikita ulit na stock
boss., pasok ba siya sa decibel meter required ng lto? ang pogi at ganda ng tunog.,👍👍
Salamat boss!! Pasado naman sya, malaking tulong yung silencer :)
wow. salamat boss., ito talaga first choice ko na motor. mataas din seating hieght niya no? hindi ko pa nakikita sa personal pero ayan talaga bibilhin ko pag uwi ko ng pinas.,👍👍👍👍
Sakto lang sa pinoy ang seat height boss. Sulit itong motor na to!
Kaso wala nga lang stock sa ngayon :)
street legal po siya? di po hinuhuli sa checkpoint?
Hindi po hinuhuli. May silencer naman din po ✌️
@@LonRider salamat sir!! 🙏 ganda ni gixx hehe
@@kdg1251 Salamat sir! Subscribe ka na ;)
Ang Ganda porma ng elbow, sarap ng tunog.. Saan location po
Salamat po! KRM Racing muffler po sa litex QC :)
Yoshimura "full exhaust" 🤣 sounds amazing
Thanks :)
sa shopee mo rin nabili yung yoshi r77 paps?
Sa FB marketplace paps 🤟
Boss saan yang muffler shop na yan? Solid gawa! RS boss!
Sa QC boss. Near litex. RS✌️
Boss, 1 month na rin gixxer 250 ko at break-period pa lang 30 kms natakbo.
Ride lang ng ride boss. Sulit yan✌️
Boss di ba ma vibrate at high speed?
Common ang vibration sa single cylinder boss. Dito ramdam mo from 7k rpm up✌️
Sayang di mo sir nakuhanan yung close up look nung na-install na.
Check mo dito sir, pati na rin ibang accessories :)
ua-cam.com/video/MUIFq5dFKEw/v-deo.html
Bro, Yoshimura RD Comes with full system wright?..
On specific bikes, yes. I haven't seen one yet for gixxer 250✌️
On construction process when I checked in their official web site comes with full system exhaust from pipe to slip-on...
@@vishnurnair7973 is there one for gixxer 250?
Yep,there is 2 models with 3 colour variants, check on their japanese website...
@@vishnurnair7973 ah okay. That's nice to know. But shipping it here is so expensive, that's why I went for the alternative ✌️
Lods ang ganda naman motor mo pero may napanuod ako rusty daw gixxer vlog ng indian plan ko kase yan sana hindi na rusty mga ilalabas sa pinas
Salamat lods! Narinig ko nga yung issue na yun, mostly sa 150. Mukang matibay naman tong 250 ✌️
How much
Around 160USD total :)
Sir, need pa ba remap/reflash ung ECU after makapagpalit ng full system exhaust?
Recommended but not required po :)
water-cooled ba sir?
Oil cooled sir✌️