@hadimachine i first thought that it is not possible, because the 1210 has a different montage of the tonarm....i just looked and i think it IS possible, but little harder to manage. thx 4 makin me thinking again about this problem i will post a video how i show how to apply the "vestax ASTS"-technology on the technics...and it will again cost apox. 10cent ;)
if u are a scratcher i would recommend using it this way, because the earth-gravity has not such an high acceleration like the rubber band.....with the band the needle "glues" on the vinyl and its much skipproof and ready for extremscratch-moves. and if u mange to adjust it to 3-4 gramms (shure44) when it is not harmfull to the vinyl at all
@traenq i know the special version i also wanted to get one. but they there real expansive, when the idea was to buy only the tonearm of the pdx2000pro, but the arm alone was like 180$....after sucsessless searching the internet for an cheaper source i was angry, run in the kitchen, took a few things and made it myself :)
@wygrzanko the pdx 3000 mk2 still has the old tonearm system (ASTS = anti skipping tonearm system), not the better one (ASTS with dynamic balance technology). the latter was, by default, only built into the pdx 2000 mk2 pro, and is of silver colour.
@revnu2 i try your tips on my mk2 . I put the rubber band and the toothpick around the weight, and put a second rubberband to the toothpick to the arm just behind the weight .It works very well , it is very smooth,and at first i was surprised.Thanks for this.
@yamamaisallama if you want to apply this hack an a 1210 it would be a little tricky. if you only use a rubber band you will have unwanted side-forces. ill try to make a other video and show how you make a little construct to make a good portation of this hack on a technics
lol @ vestax germany commenting on this... I was a bit disappointed after buying the 3000s too (there was a limited series of 3000s with the QFO tonearm in Japan, but getting a pair of those was near impossible), but I haven't made any modifications to the tonearm and it hasn't let me down in 2 years. I'll try this mod for shits 'n giggles, but I don't think I'll end up using it regularly. the MIDI pitch feature makes up for everything anyway .) still, good idea.
nice 1 I will do that with my qfo le,dx but first I need to buy a new tonearm but cannot find N E where that have the on the net besides faider.com and they hav sold out
@yamamaisallama i agree, that the platters of the vestax are complete bullshit....they have a bad montation, if u put your hand on one side the other side goes up, because they used not enought metal to make a solid thing like the good old technics.....i kept my 2 technics and bought just one vestax 3000 for cutting ;) if i have time im going to make another tutorial and explain a way to accept this hack to the technics 1210. its not that easy to port this trick on the 1210.
@revnu2 Good Job man ! Ill try that on my PDX-2000 (without mk2, pro, gti or ultra-hyper what-so-ever). They tend to skip from time to time, even though the counterweight is on full force. Looking forward to "wallride-scratching" ! :) And hi @Traenq! -ECM ausm MuBo. ;)
Why are you so angry with Vestax? If they messed up, you could have taken it back to the shop? Or you bought the wrong thing. Either way it's a very cool mod!
It's funny, I own 2 Vestax 2000mk2-pro's and I actually just leave the spring setting off. It doesn't seem to make any difference, the straight tonearm is incredibly skip proof without the spring loaded pressure. I think Vestax choose not to use the spring loaded tonearm in the newer model is because it really was completely unnecessary.
@ traenq : and that´s exactly what it is !!!!! its so stupid ..... vestax had to build the whole vestax 3000 series with the special Anti Skipping Tonearm !!!! Revnu 2 is a fucking genius !!!!! He is daaa real Innovator of the "Jerry-Rig" Revnu2 created it and Jersey named it !!!! Revnu2 is history in turntablism and djing right now :) i´m down with him and i´m against the whole vestax fucking toy bullshit community !!!! Q BERT WOULD BE PROUD !!!!
@ traenq : and that´s exactly what it is !!!!! its so stupid ..... vestax had to build the whole vestax 3000 series with the special Anti Skipping Tonearm !!!! Revnu 2 is a fucking genius !!!!! He is daaa real Innovator of the "Jerry-Rig" Revnu2 created it and Jersey named it !!!! Revnu2 is history in turntablism and djing right now :) i´m down with him and i´m against the whole vestax fucking toy bullshit community !!!! Q BERT WOULD BE PROUD !!!!
@ traenq : and that´s exactly what it is !!!!! its so stupid ..... vestax had to build the whole vestax 3000 series with the special Anti Skipping Tonearm !!!! Revnu 2 is a fucking genius !!!!! He is daaa real Innovator of the "Jerry-Rig" Revnu2 created it and Jersey named it !!!! Revnu2 is history in turntablism and djing right now :) i´m down with him and i´m against the whole vestax fucking toy bullshit community !!!! Q BERT WOULD BE PROUD !!!!
@hadimachine
i first thought that it is not possible, because the 1210 has a different montage of the tonarm....i just looked and i think it IS possible, but little harder to manage.
thx 4 makin me thinking again about this problem
i will post a video how i show how to apply the "vestax ASTS"-technology on the technics...and it will again cost apox. 10cent ;)
thx dude ;)
i will post a howto, how to apply this trick on the technics 1210
if u are a scratcher i would recommend using it this way, because the earth-gravity has not such an high acceleration like the rubber band.....with the band the needle "glues" on the vinyl and its much skipproof and ready for extremscratch-moves. and if u mange to adjust it to 3-4 gramms (shure44) when it is not harmfull to the vinyl at all
@traenq
i know the special version i also wanted to get one. but they there real expansive, when the idea was to buy only the tonearm of the pdx2000pro, but the arm alone was like 180$....after sucsessless searching the internet for an cheaper source i was angry, run in the kitchen, took a few things and made it myself :)
@wygrzanko the pdx 3000 mk2 still has the old tonearm system (ASTS = anti skipping tonearm system), not the better one (ASTS with dynamic balance technology). the latter was, by default, only built into the pdx 2000 mk2 pro, and is of silver colour.
Nice bro!!! I Love people which are trying, searching some solutions
I'm similar, peace
@revnu2 i try your tips on my mk2 . I put the rubber band and the toothpick around the weight, and put a second rubberband to the toothpick to the arm just behind the weight .It works very well , it is very smooth,and at first i was surprised.Thanks for this.
Genius , like i thought working
Hello sir please show us how to do this trick for tehnics 1200 mk2 please🙏🙏🙏
This video really made me smile :-)
@gesc1200 its is krazy cause i just did bout to do a video response tommorw stay tuned on that
Nice work 👍👌
@yamamaisallama
if you want to apply this hack an a 1210 it would be a little tricky. if you only use a rubber band you will have unwanted side-forces. ill try to make a other video and show how you make a little construct to make a good portation of this hack on a technics
lol @ vestax germany commenting on this...
I was a bit disappointed after buying the 3000s too (there was a limited series of 3000s with the QFO tonearm in Japan, but getting a pair of those was near impossible), but I haven't made any modifications to the tonearm and it hasn't let me down in 2 years. I'll try this mod for shits 'n giggles, but I don't think I'll end up using it regularly. the MIDI pitch feature makes up for everything anyway .)
still, good idea.
Thank dude for the tip. Very helpful . 👍👍
CRAZY !! IT WORKS !! In Jersey, we call that a jerry-rig! HAHAHa.
great job man ... can u do this with the numark ttx 2 ?
DAMN this helped so MUCH
nice 1 I will do that with my qfo le,dx but first I need to buy a new tonearm but cannot find N E where that have the on the net besides faider.com and they hav sold out
is it possible with a technics? How?
@yamamaisallama
i agree, that the platters of the vestax are complete bullshit....they have a bad montation, if u put your hand on one side the other side goes up, because they used not enought metal to make a solid thing like the good old technics.....i kept my 2 technics and bought just one vestax 3000 for cutting ;)
if i have time im going to make another tutorial and explain a way to accept this hack to the technics 1210. its not that easy to port this trick on the 1210.
That cool.bro im going to tried it
are u from Poland or smf :D?
Hey bro ur a GENIUS that shit works bout to have my poster and a video response to this video tommorow PEACE
Sehr cool, danke!
@revnu2
Good Job man ! Ill try that on my PDX-2000 (without mk2, pro, gti or ultra-hyper what-so-ever).
They tend to skip from time to time, even though the counterweight is on full force.
Looking forward to "wallride-scratching" ! :)
And hi @Traenq!
-ECM ausm MuBo. ;)
Why are you so angry with Vestax? If they messed up, you could have taken it back to the shop? Or you bought the wrong thing.
Either way it's a very cool mod!
@nvanzoeren
yes i hav a webshop and sell it......itz 100$ one poster
What vinyl are you scratching?
REMAIN RAW super seal
Genius !!!
sound like jumps on the groove
anyway
nice vid 5 Stars
genius!
It's funny, I own 2 Vestax 2000mk2-pro's and I actually just leave the spring setting off. It doesn't seem to make any difference, the straight tonearm is incredibly skip proof without the spring loaded pressure. I think Vestax choose not to use the spring loaded tonearm in the newer model is because it really was completely unnecessary.
"I don`t know the english word for this." lol
love the accent especially when u say vestax bullshit
Drug Scale......u got it ;)
Haha vestax bullshit 😂❤
@ traenq :
and that´s exactly what it is !!!!!
its so stupid .....
vestax had to build the whole vestax 3000 series with the special
Anti Skipping Tonearm !!!!
Revnu 2 is a fucking genius !!!!!
He is daaa real Innovator of the "Jerry-Rig"
Revnu2 created it and Jersey named it !!!!
Revnu2 is history in turntablism and djing
right now :)
i´m down with him and i´m against the whole vestax fucking toy bullshit community !!!!
Q BERT WOULD BE PROUD !!!!
Professional Scale for Drug Dealers !!!!
I think they call it Drug Scale !!!! 2:38
COME CLEAN !!!!
der übershit 8)
great job man ... can u do this with the numark ttx 2 ?
@ traenq :
and that´s exactly what it is !!!!!
its so stupid .....
vestax had to build the whole vestax 3000 series with the special
Anti Skipping Tonearm !!!!
Revnu 2 is a fucking genius !!!!!
He is daaa real Innovator of the "Jerry-Rig"
Revnu2 created it and Jersey named it !!!!
Revnu2 is history in turntablism and djing
right now :)
i´m down with him and i´m against the whole vestax fucking toy bullshit community !!!!
Q BERT WOULD BE PROUD !!!!
@ traenq :
and that´s exactly what it is !!!!!
its so stupid .....
vestax had to build the whole vestax 3000 series with the special
Anti Skipping Tonearm !!!!
Revnu 2 is a fucking genius !!!!!
He is daaa real Innovator of the "Jerry-Rig"
Revnu2 created it and Jersey named it !!!!
Revnu2 is history in turntablism and djing
right now :)
i´m down with him and i´m against the whole vestax fucking toy bullshit community !!!!
Q BERT WOULD BE PROUD !!!!