How To Set Your Gain When Recording
Вставка
- Опубліковано 24 тра 2019
- What level should you record at to get a professional sound with minimal noise?
Recording at the right level is important when trying to get a professional sound. In this video, We will look at:
1) Avoiding background noise
2) Getting a full and balanced tone
3) Inspiring confidence in your recording
The differences in sound when recording at different levels were far smaller than I expected and could really be down to the sight change in position and manufacturing tolerances. I was expecting there to be a lot of background noise in the quiet recording but there was almost none! It's amazing what can be done with modern equipment. - Навчання та стиль
Recording at the right level is important when trying to get a professional sound. In this video, We will look at:
1) Avoiding background noise
2) Getting a full and balanced tone
3) Inspiring confidence in your recording
Thanks for the best videos
Yea yea I can hear it. Yea it is interesting.... (me listening on 20 dollar headphones) awsome video!
I was hearing the room more in the lower one
Awesome!!
I would take an educated guess and say the reason the 2 recordings sound slightly different is due to the position of the mics rather than what volume you recorded at. Even though they are very close together, just a small difference in relation of the mics to the instrument can cause a noticeable difference in sound. Micing is a science in itself.
To be honest every time I watch a video of yours I feel so much better about myself, i dont know why.
UA-cam is addiction
To me it sounds like you're saying he's lesser than you which makes you feel better :|
@@tokyolock not my fault you take things the wrong way 🙃
No need to get heated buddy
Me too
Amazing demonstration!! Excellent work Michael!! This was extremely helpful to all of us, no matter what your level of experience!! Marvellous work!! The Lewitt is a near zero noise microphone, amazing value for money!
Great thing seeing my 2 favourite channels admire and help each other. You guys rock!
Cool to see you here!
🙄
Am going to be a Marvellous Producer
I've never considered that there may be a difference psychologically between looking at a weak signal versus a strong one. That was an interesting and unexpected observation. Kudos.
dude out here making experiments i’m wayyy too lazy for, just comin for the results. great job man, thanks
I just want to say thanks for all of the things you do for us. I have been producing for a bit more than a year, and often face problems that I cant resolve myself, the first place i go is your channel. thank you for always delivering great videos!
Definitely one of my bigger insecurities about creating music.
Thank you so much for the time and effort put into the making of this video, In The Mix, i truly appreciate it!
You're definitely amazing. Thanks!
I notice my vocal recordings have the thinner line signal and I've been quite worried about that. I discussed it with a pal today, and your video divinely comes in and addresses the issue. My confidence is up now man.
You are amazing!!!!
Lots of respect for allowing yourself to say what you really saw here instead of trying to find a difference that wasn’t there. I was expecting the same thing and I actually reversed back thinking somehow there was a mistake but nope...you got it!
In my opinion, your passion for music makes you the best. I watch everything you release. This is just a plus to it. Big up.
i been struggling with trying to decide how hot to set my pre for years. thanks for this. much needed. subbed
You're my best teacher in beat making. You have helped me so much that I can't thank you enough.
Respect for being confident in showcasing your biases and testing them.
You are too much my boss, the top level sounds more clearer than the low level thanks for this video, pastor emma from Ghana.
Love your videos, so helpful, thank you so much for taking the time to put all this together.
I was searching this topic today....and you put this on ur channel....loved the advice 🤟
You keep on dropping gems buddy. Amazing work... thank u so much!!
Finally someone bold enough to prove this point. Thank you!
Great video, I was surprised my the results! I also figured there would be some extra noise. Thanks for doing this!
thank you so much. your knowledge and hard work is appreciated big time
Fantastic analysis and very insightful comment on instilling confidence by recording with a robust level of gain!
Love your videos man! They are so informative and interesting. Would have loved to see Pro-Q EQ match function comparing both signals, cause I could hear a difference in the top end.
Gosh, did I need this. Recording opera singers with an H4, and confidence was lagging today..... thank you sooooo much!
Excellent 🙌🙌🙌 and thank you so much. I was confused about the -18 suggested level for recording. My electric guitars sounds superb peaking at -3. Now I’m recording my amps again with shure 57, 58, beta 58, royer 121, akg 414 and so. Neve 1073lb preamps, apogee symphony mkII as the converter. Noise was never an issue. But the richest juicy full magic tones of electric guitars I found them at levels of -3. So thank you again👏🏻👏🏻👏🏻
Thanks for this! Finally someone did a reasonably scientific comparison of this issue (i.e., without obvious confounds). Well done!
You know what.. you are the one of best UA-camr. You deserve million subscriber and will be. Your every topic about mixing is very informative. I appreciate it. God bless you..
I really like your videos, your experiments, sweet accent and your calmness
Really useful, thanks - explained exactly what i was looking for.
Hey Michael! I like how you speak in a calm and relaxing way
i just found out about you like 30 min ago and i am so happy i did
You are such a great pro! Only surpassed by your human quality as a person. Thanks so much mate!
Yeah. When it comes to quality gear the converters are pretty clear and noise and hiss is typically much lower. But when you use cheaper equipment the converters tend to get a bit crunchy when hit harder and tend to get brittle and crackly at low volumes.
I teach my students -12dB is pretty healthy and even on cheaper equipment it’s pretty clear and artifact free. I link them your videos as well since the explanations are nice and clear. :)
Thank you so much, your videos are just wonderful
The work you are doing is amazing.... Keep killing it ❤️.... I wish you to become more famous 💕
Super interesting thank you for sharing sir
Whenever i watch your videos i feel inspired,thnx bro.
Brilliant! Loving the scientific approach!
Excellent video. Experienced advice and delightfully clear - Subscribed!
Loved your experiments. Learned learned a lot. Thank you.
Great lesson, thank you, subscribed!
super sound and marvelous explanation
8:30 This is a good point. So when I recorded with a guitarist, i actually put on a Master Bus Comp, followed by some basic Mid Side processing. It made the backing track sound louder and fuller, where as without those effects the track sounded a bit raw and a bit lifeless.
Of course when the recording is done I will strip all that stuff out and begin from scratch to get a fresh mix.
To me you have really taught me a lot with your videos and I wouldn't be where I am today... God bless you
It was exactly what I needed. Thank you.
Thank you a lot for your videos. You are helping me a lot with recording. I always try to improve myself =)
I’ve been searching the internet for this for a long time. Thank you. I record synths and they cover a huge frequency span so you have to record so low and then increase gain. I always think it’s distorting the recording but then im not sure. I think my eyes are playing tricks on my ears.
I enjoyed the video. Regarding the concept of confidence, it helps me to record my flute with a little less gain, because I have confidence to play out in the upper register without clipping. When playing the flute any type of tension can cause, especially, tone problems. So not worrying about clipping helps improve the performance. Yes, I do complete a sound check in the various registers, but playing “live” seems to always be a bit louder. Regarding the size of the waveform, I simply would raise it before a customer sees it. I would do this anyway before I listen.
Great test with no mucking about cheers!
You are a fountain of great information. I’m a bedroom producer, and I would be much worse at it without your videos. Thank you so much!
Really useful video, keep up the amazing work
I love your videos man! Great in-depth video about something that can be easily overlooked.
Michael really you are great..I really follow you a lot...
I love ur teaching style....
Bro,u just helped me understand the difference between rms and peak value. Been recording vocals at minus18dbfs,now i no why I never got the desired tone and feel. Gain staging is useless when a beginner doesn't understand the different types of meter and how to read them. Thanks alot again. Taylor magic from Nigeria that's in Africa
Awesome work man - I for one did hear a difference in the tone of the guitar between hi and lo. Hi felt as you said a bit more rich in that it had a very subtle natural reverb. While the lo actually had a lo in where I experienced a sound with a slight bit of bass between each strum.
this was really interesting. this is what we need.thank you
And excellent input there. Kudos. :)
U r god mannnnnn!!!!.i was jus searching this topic today and here i got my answerssssssssss like dammmmm
Love u mannn❤❤❤❤❤
When recording with true analog equipment, input volume is incredibly important. Hitting your pre amps, EQ and compressors with the right amount of gain is paramount. Although, there is room for interpretation in terms of saturation and colour.
The open rule of an RMS of -18DBFS is a good starting point for a recommend gain structure. Although this is open for interpretation, depending on the musical role of an instrument and the saturation required for the genre.
Most analog equipment manuals will tell you to hit the equipment with a particular amount of gain in order to achieve optimal sound colouration. Usually around the RMS of -18DBFS.
Great video. You're a genius.
Audio engineering is extremely difficult for me to figure out and do with trumpet and make it sound well.
Watching your videos honestly makes it feel less overwhelming and makes working with FL Studio feel more relaxed.
Very nice video, I like the recording and
I normally record at (around) -12dB/-6dB-peaks (at 16bit/48Khz) or -18dB/-12dB-peaks (at 96Khz 24bit) obtaining a nice dynamic and well defined sound than lower values of recording levels...You say right, the noise is something to decrease as much as possible before to record something and...after, using a noise gate to automatically cut-off the intervals between a word or phrase to another...
This video is really interesting and helpful. People are saying mic placement but I think what’s causing the difference is interface’s internal physical preamp gain. They are indeed analog, so I think they affect non-linear so that’s exactly why they sound different when volumes are digitally matched.
However, this comes down to this question. Which is better? I can’t really judge which is better. I felt both has different advantages.
What do you think about this point?
i truly like this dude ❤️❤️❤️ god bless you
I love this channel!
whenever i'd watched your tutorial it's inspire me so much
thanks for hardwork for this
all your vdo guide me to make my own in my language for best way for peoples in my country
wish your healty good everyday and god bless you my great teacher on youtube
Amazing Video 🔥🔥🔥🔥Thank You 🙌🙌🙌🙌.
The difference in tone between the two recordings could come down to the slightly different placement of the mics as opposed to the input gain
Yes, 100% as loudness correction has no way of "colouring" a sound.
Definitely. No two mics sound the same either.
This test requires a parallel cable into two pres so that you are comparing the same capsule.
Thanks for always been there, there is no way i can pay you.
I just got done recording myself for the first time on vibraphone, and I hate to admit it, but I am definitely in the 'low low levels' camp. I had to boost the gain in logic so much to get it to sound. Luckily, I had access to some really nice equipment through my university, so I didn't have noise issues. Still, I definitely need to practice more.
Hey Michael, I'm new to your channel. This is cool! I have been playing the electric guitar for a few years in church and at home. I like the tone on the high gain more than the one of on the lower gain.
08:55 the second microphone which records in low voice is sounding like more bass boosted than other
I like the low input gain. Because I feel the more dynamic on it. And very much clear. Other hand you have more head room to tweak and make the sound more better. Because in audio recording head room is very important. I strongly believe. -18 LUFS input gain always good to start. And very good video. Nice explain.
I enjoyed this video it was very well done. I also like a healthy level when recording, the only thing to be mindful of is gain staging while mixing, otherwise all those hot signals will kill your mix buss RIP. Also some plug-ins sound better when not fed an overly hot signal, you know, that mystical sweet spot 🤓
Thanks again bro!!
Just what I needed! Thanks! By the way, it is possible that microphones are not 100% identical, that is what they sound a little bit different
Okay thanks try to think about that in my next project
If an artist that had a vocal with a very dynamic range were going over one of the two recordings I'd choose the top one because there is less "distraction" on that recording as opposed to the second recording where I heard a lot of little details that would sound nice accompanied by a vocal with little dynamic range or a track where the vocal is not the main focus. Idk if that makes sense but that's how I perceive what's going on. Thanks for the tutorial and tips!
Bro! Thanks for this important information.
1. We also need a tutorial on How to mix Vocals of Two singers or more. (DT s) and Choir
2. Surround mixing.
Please make videos on these two if you really think they are useful.
THANK YOU
Thankyou for making the video
You Are Awesome.
You are the best!
I think the tonal difference in the two guitars might just be the 2 inch difference in mic placement. What are your thoughts on using the normalising feature to make everything the same level? Will it help to make sure the mix plugins are hit at the right level? I was always cautious of doing it because of the potential to introduce noise, but it seems that concern was misplaced in light of what you've just shown.
Thaaaank you so much !!!
you are something else sir
Gotta say this video has definitely taken away my fear and worries of recording a little too quiet or too loud... as long as the signals are not clipping, I can always increase or decrease the volume in my DAW. The tone quality demonstrated in this video is noticeable, but it's not as significant to the point we should spend our time debating which is better. Great video!
Other factors come to play as well such as the preamp/interface you’re using, the type of mic, and the mic placement. If you have a cheap preamp/interface, they tend to be noisier due to its electrical components.
@@tylerdengler6960 I'm using Scarlett 2i2 and AT2020, I guess that's good enough at least for entry level wise?
@@namede6210 I’d say so. Personally you gotta experiment and see what works with you whether you like to be conservative with levels or really like to push them. Noise floor isn’t a big deal now compared to the 50s to the 80s with the analog gear. But, just be considerate on not to introduce any unwanted noise or clip/distort upon recording.
I had the same misconception going in when it came to the noise! Crazy
Nice Job Brother
Amazing video! Just a quick question, how did you boost the volume of the quiet recording to match the louder one? Thanks!
Very good demonstration. I am hearing a bit more treble tone from the second recording. But warmer to me is what I prefer in most cases. If you have a video on maximizing output during playback please send a link. I can never get a strong output on a home recording on my receiver end as when I pop in a professional CD. Seems like my volume knob has to increase about 1/3 more. Thanks for the tips I will check out for your Vid's.
I think this whole "introducing noise when gain staging a low signal" is mainly focused on pushing the signal after compression. That could be why you did not experience the effect you expected with the low signal. Isn't that the most crucial step in your effect chain regarding noise? Have you tried compressing it before you add the gain?
love you videos, helped me a lot :)
Definitely hear a difference. The top one sounds full, where as the bottom sounds a little bit reverberized, as well as the top end feels a bit eqed out.
For a dynamic vocal recordings, using ML-1 and mic emulations, my vocals average lies around -24 to -25(even -28 to -30 dbfs) for very soft phrases, with peak around -11-12 db for louder ones. Recording at 24 bit, Clarett 2 pre.
Are these levels alright ?
Its hard for me to hear a difference no matter how hard I tried...they both sound the same to me. Great vid as always! Thanx for sharing. Greetings from California
Hi Mike and thanks for wonderful tutorials😍, may you make a tutorial or explain about difference between pick , rms , db and UV !? Please it's so important for me
Thanks
God has a lot of work these days, so he decided to put you on UA-cam so he doesn't have to be taking care of us, the forgotten person behind the sucess of the singers: producers.
Thanks for the content!
I'm actually surprised how close these track sound. I was sure that the quiet one would have more noise even when using a decent mic. However, audient has a great preamp so this might have something to do with that as well. Awesome video man, nice work
Thanks! Yeah I surprised myself and wasn't expecting it to match the noise identically...
Love your videos...and accent! where are you from? Question: Every time I export my FL loop the recording is never anywhere near as clear and defined as it is when I play through FL....even after following your advice on Export settings etc. Even if I make the downward waveform well within the green it still sounds rubbish after export both on my Jamman looper pedal and when I play it on my computer after clicking on it in Windows file explorer. Also, how do you get the horizontal wave form to come up in FL Studio...I've tried everything! Thanks.
The difference is surprisingly small! Looks like it's completely safe to record much quieter in many cases. Targeting averages somewhere between -24 dBFS and -18 dBFS depending on the noise floor of your preamp. -18 dBFS is a good RMS average if you use plug-ins emulating analog gear.
Can anyone help me please? :)
When I put CLA Guitar effect on my track… there is a "White noise" even when I'm not playing anything. The noise is coming from CLA guitar.