How to Service and clean Resmed airsense 10 Cpap device | Cpap service | Cpap cleaning | 03233365253
Вставка
- Опубліковано 17 вер 2024
- Cellphone No: 03233365253 | 03052568444
PTCL contact: 021 32780077
Email address: info@razacorporation.com
Website: www.razacorporation.com
How to clean your CPAP equipment
To get the best possible therapy for your sleep apnea, it’s important to properly clean your CPAP equipment on a regular basis including the mask, air tubing and humidifier tub.
Cleaning your CPAP mask cushion, frame & headgear
AirFit series, Swift, Mirage, Quattro and Pixi masksAirTouch F20 cushion 1
Daily cleaning tips:
1
Unplug your CPAP machine from the power source.
2
Disconnect the mask and air tubing from the CPAP machine.
3
Disassemble your mask into 3 parts (headgear, cushion and frame).
4
In a sink or tub, clean your mask cushion and headgear to remove any oils. Gently rub with soap and warm, drinking-quality water.
Avoid using stronger cleaning products, including dish detergents, as they may damage the mask or leave harmful residue.
5
Rinse again thoroughly with warm, drinking-quality water.
6
Place the cushion and frame on a flat surface, on top of a towel, to dry. Avoid placing them in direct sunlight.
#resmed
#cpap
#cpapservice
just finish service by own self,....thanks for this video.
Is there a reason you didn't open up the motor housing and clean the turbine directly?
Basically the question I was also asking while watching. The electronics don't get that dirty since no moving parts and don't affect the cleanliness of the CPAP compressed air.
It would be great to see a vid on how to break the whole thing down and clean it e.g. open up the motor section and give that a cleaning.
Perfect....👍🏽👍🏽👍🏽
How do you clean the flow meters? I noticed the pump connects to them on the circuit board.
Do I see a backup battery (CR2052 or similar) on the lower/rear/center on that motherboard???
I have a so clean machine that does all that.
Can you post a video of Resmed lumis 100 servicing?
👍