Thank you SO MUCH for your video. The one posted by Comgrow Official, it... um... well... sucks! Three minutes at accelerated speed. And their manual doesn't even show the limit switch. I built the Z1 I purchased with YOUR help... not Comgrow's. Thank you so much!
hi i got the 5w original so was wondering about the small piece of plexiglass that came with it... I was using it to adjust the length between the laser and the stock... and wanted to make sure I was doing things properly. thank you. I have recently purchased the 10w z1 from comgrow and wondering if I will find a thicker test piece of that is what it is. thanks.
Hi i have the comgrow z1 10w and using the spacer to handle the focus, i try to cut 4mm boards from hobby lobby... i think they are solid wood... do you have to use plywood as no matter how many passes the laser doesnt go through... however i found if i do multiple passes with my 5w laser, also a comgrow z1, through the same 4mm material solid board it cuts.... although takes 5-6 passes... why is a higher wattage not seeming to handle the same job better? Ty
Mine doesn't change from Idle... how do I make it go? I can move the laser around by pressing the arrow buttons, but even though I've loaded up an image, i cant see how to make it run, I think the start button is greyed out. I tried updating the firmware (have no idea whether this actually worked because there's no indication as to whether it did anything with the SD card inserted). 😦 Edit: Nevermind, I'm an idiot, realised you've got to press the little play button next to the COM port, and not the large STOP/GO buttons in the bottom right 😕
,,😭😭😭Compré una comgo z1 de COMGROW cómo hace 20 días y está es la hora que no he podido utilizarla la primera vez. No me conecta mi PC con la máquina dice que es por el drive ch340 y aun así instalado no me conecta, actualize el firmware tampoco instale en dos computadoras distintos tampoco alguien me podría ayudar en decirme que pasa?,😭😭😭👎
hi everyone! I also own a laser comgrow z1 and I have quite a lot of problems with it.. does anyone own it and can help me with some settings for it... I use lightburn... thank you very much
Thank you SO MUCH for your video. The one posted by Comgrow Official, it... um... well... sucks! Three minutes at accelerated speed. And their manual doesn't even show the limit switch. I built the Z1 I purchased with YOUR help... not Comgrow's. Thank you so much!
Well done. Appreciate your extra additional setup tips. Thank you for taking the time to compile and share this video.
Wow, Igor, the video is really awesome! Thanks so much🥰🥰🥰
hi i got the 5w original so was wondering about the small piece of plexiglass that came with it... I was using it to adjust the length between the laser and the stock... and wanted to make sure I was doing things properly. thank you. I have recently purchased the 10w z1 from comgrow and wondering if I will find a thicker test piece of that is what it is. thanks.
Hi i have the comgrow z1 10w and using the spacer to handle the focus, i try to cut 4mm boards from hobby lobby... i think they are solid wood... do you have to use plywood as no matter how many passes the laser doesnt go through... however i found if i do multiple passes with my 5w laser, also a comgrow z1, through the same 4mm material solid board it cuts.... although takes 5-6 passes... why is a higher wattage not seeming to handle the same job better? Ty
How do you check the boundaries before you press start?
There is a button in laser grbl. In lightburn it is called frame.
How do you do boundaries check I can't find that on the program
It should be in LaserGRBL on bottom, a rectangle with mark icon.
Mine doesn't change from Idle... how do I make it go? I can move the laser around by pressing the arrow buttons, but even though I've loaded up an image, i cant see how to make it run, I think the start button is greyed out.
I tried updating the firmware (have no idea whether this actually worked because there's no indication as to whether it did anything with the SD card inserted). 😦
Edit: Nevermind, I'm an idiot, realised you've got to press the little play button next to the COM port, and not the large STOP/GO buttons in the bottom right 😕
amigo,that is ecxellent ! :))
Thank you. One of the strongest diode laser for engraving I tried so far.
,,😭😭😭Compré una comgo z1 de COMGROW cómo hace 20 días y está es la hora que no he podido utilizarla la primera vez. No me conecta mi PC con la máquina dice que es por el drive ch340 y aun así instalado no me conecta, actualize el firmware tampoco instale en dos computadoras distintos tampoco alguien me podría ayudar en decirme que pasa?,😭😭😭👎
Z1 or ts2 ???
hi everyone!
I also own a laser comgrow z1 and I have quite a lot of problems with it.. does anyone own it and can help me with some settings for it... I use lightburn... thank you very much
CHICLAYO PERU 🇵🇪