Comgo Z1 Laser Review - Comgrow
Вставка
- Опубліковано 18 жов 2021
- #COMGO #COMGRO #Z1
Received this Comgo Z1 #laserengraver from Comgrow to review. It is 400mm x 400mm with a 5w Laser Diode. Will it perform as advertised? Lets unbox it, set it up, and do some testing!
Comgrow Comgo Z1 laser engraver -
www.comgrow.com/products/comg...
Comgrow Laser Enclosure -
www.comgrow.com/collections/e...
Honeycomb Laser bed -
www.comgrow.com/collections/e...
Comgrow Rotary -
www.comgrow.com/collections/e...
Comgrow 10w Laser Diode -
www.comgrow.com/products/20w-...
#lasers #diodelaser #5wdiode #lasercnc
Comgo Setup Video -
• Unboxing of Comgrow CO...
#Lightburn Software
lightburnsoftware.com/
AstroPrinter -
/ astroprinter
3DHP -
/ 3dprintingandpainting
Paw Paw's Workshop -
• How to Laser engrave o...
Tempera Paint -
www.amazon.com/gp/product/B00...
Dog Tags -
www.amazon.com/gp/product/B07...
100pcs Blank Metal Business Cards -
www.amazon.com/gp/product/B08...
Harbor Freight workbench -www.harborfreight.com/60-in-4...
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
/ tripodsgarage
/ tripodsgarage
/ tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
Kywoo, Tycoon, Tycoon Max, Tycoon Slim, CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0 #tycoon #tycoonslim #tycoonmax, ATOMSTACK A5, #ATOMSTACK #ortur #xtool #laserbox - Наука та технологія
Great video - thanks for sharing! For anyone using "Cermark" laser spray on steel items (very expensive at $7 to $10 per ounce), give mustard a try. Sounds crazy but cover the etching area with regular store-bought yellow mustard and then engrave at normal settings. Try one with the mustard still wet and one after drying to see which works best for your needs. I don't remember where I saw this on UA-cam, but I am not the one who came up with it. Just passing along a good tip. Good luck!
I've found on anything metallic we would cover with either painter's tape or a coat of flat black rattle can. That's how I've burned/etched pcbs in the past. Great video!
Love the hot dog carving at the end 😂😂! Also Bear rocking the safety glasses. Great review 👍
Haha.. amazing. I especially love the "bloopers" with the hot dog at the end, starting around 18:29. Great vid and thanks for sharing your experience with this awesome machine!
It was a fun thing to do, thanks for watching and commenting 😉👍
Great Video Tripod. Thank you for the plug. I will share this on Socials. Loved the hotdog and Bun.
So helpful! Thank you!
WOW! That's splendid! You're awesome Tripods!
Oh wow, very great video tripod! You can do awesome stuff with this laser, even that hack what you did with the hotdog and buns on the end
👊🏾 great big help thanks
Awesome video. Thank for the useful info.
Thanks!
I liked the custom laser glasses on Bear. I'm surprised that he let you eat the hot dog. Good review, really like the graphics
Thanks David! Bear actually didn’t want anything to do with those glasses. Usually he is a willing participant, however these glasses were tickling his ears 😉! Bear got the crackers, which I forgot to film, and wasn’t around for the hotdog. Been trying different graphics lately. The more graphics I use does increase the rendering time. However, think it is worth it in the long run 👍. Thanks again for watching and commenting!
Fantastic video, really useful. I'm in the process of buying a laser and you've made my mind up this will be good for what I want to do with it. Many thanks again...Martin (Nottingham in England)
Nice job John!
Thanks! I will make you a custom engraved hotdog the next time I see you!
@@TripodsGarage okay this just got really weird. I prefer raw dogs. No buns
Have you tried etching aluminum? I wonder if it etches well when painted like you did with the glass.
You could drop in some colored UV resin into the embossing on the campfire board to really make it pop.
Great idea! Thanks!
Oh that’s a great idea
Will it cut lighter wood like Balsa? And can it cut through the 3mm plywood without all that char?
Need tips on getting started centering etc.
Wondering if your limitation on the board to reach 400x400 is because you have the numbers on left and bottom using that space.
Have you had any problems with your Z1? Seems there are quite a few people that are now having problems out of the box.
My laser is still very New. Just used it for three weekends when I'm at home. It worked very well befofe. However, it has suddenlly started producing very faint light at the diode. It's not burning anymore because the light/beam is weak . What could be the problem ? The engraver is comgo z1
So now you can grill burgers on your FDM printer and hot dogs and buns on your laser. Once you get the plasma cutter you can "go the whole hog". Great to see Bear practices pew pew safety. Nice video John. Did you have air assist when you engraved the Firepit board?
The food tests, I see what you did there. 🤣
Laser dogs!
Two types of laser dogs! LOL!
Everyone watching this! Please make sure you watch the video till the end, otherwise you will miss 🌭 magic being made 👏
It is most definitely a magical 🌭😂
Great video! But have you ever engraved any other metals? I'm really curious about brass and copper?
Unfortunately the 455nm diode laser will not engrave brass or copper. Basically it will only mark stainless steel. If you want the engrave metals you will need a 1064nm laser. Hope that answers your question? Thanks
Can you use a iPad to run this I am in the process of buying the comgrow z1 10 w laser any help would be appreciated thank bill
Is there a file to share for the spoil board?
How many hotdogs got hurt in this production tripod 😉😂
Only 1 hotdog, but 3 buns were sacrificed ;-)
You ever thought about to heat a pot of noodles with the laser ?
Can this laser work direct from computer using Corel draw ?
Can this laser Z1 make rubber Stamps ?
How much noise does it make? Can I use it in an apartment without bothering my neighbors?
A sua corta 100% no esquadro??
Hot dog, hot dog, hot diggety dog..... watching the till the end gave me some thoughts.
Compré una comgo z1 de COMGROW cómo hace 20 días y está es la hora que no he podido utilizarla la primera vez. No me conecta mi PC con la máquina dice que es por el drive ch340 y aun así instalado no me conecta, actualize el firmware tampoco instale en dos computadoras distintos tampoco alguien me podría ayudar en decirme que pasa?,😭😭😭👎
Where you find the grid mat underneath
You can find it here www.etsy.com/listing/1017491880/ortur-laser-master-2-basic-400x400-grid?ref=shop_home_recs_1&crt=1
I have my comgo z1, but the Y doesnt move and I do not why. Could you give me some tips to verify the Y movement. Thanks I am in Mexico.
Greetings m! I would first start with all the connections to the Y and to the board. Also look for damages to the cables. You can switch the X and Y cables for a simple test. Hope that helps!
@@TripodsGarage thanks a lot for your answer, how can I test ?
Bonjour,
Comment est ce possible de graver plus grand que 400 x 400 je ne comprends pas comment vous avez fais ?
You would need longer extrusions and belts.
Do you have a link to engraving file for that spoiler board?
You can find it here www.etsy.com/listing/1017491880/ortur-laser-master-2-basic-400x400-grid?ref=shop_home_recs_1&crt=1
@@TripodsGarage Awesome, thank you.
Can this cut paper to make invitations? Thank you
Yes it can