I used to be really bad with the OCD, now I learned to turn it on or off when needed, lol. I keep the shop like that mainly for the channel, usually it's very dusty but keeping it clutter free gives me more space 😉
Greetings Pete, Thanks for sharing your shop. I finally found somebody as OCD as myself when it comes to cleaning up after every cut you make 😂😂. I to am a full-time business furniture maker. I’m always searching for new ideas for workflow plus a clean well maintained and organized shop is also a safe shop. Best of luck in the new year. Looking forward to subscribing and following along. I’m ready for a shop tour myself last one was about 4 1/2 years ago how they change! its also a good method to catalog your upgrades and workflow 😎Well done👍
Hey Walt, thanks so much! Lol, I used to get teased about how OCD I am but now I just tell people that I put the same attention to detail in whatever I build and in our business details matter. I like your shop also, especially the plane wall. Good luck to you also, I too will be following along 👍
@@StudioZ72.create Now that’s a great line Pete.I may need to borrow that.😎😂👍 also, what’s your IG page? I was looking forward to subscribe, but I couldn’t find it. Thanks for visiting my channel. I really appreciate your support as well!
Thanks for sharing - Made me smile when you mentioned Norm's New Yankee - I am sure there was a whole generation of woodworkers that grew up with that. Such a shame there is nothing to replace it. I guess UA-cam is the new New Yankee. Thanks again.
I like how much you're able to do in the small space and the principles you've used to manage that. This is a really great video, well explained, well produced. Can't wait to see what else you have in store.
I subsribed. Thanks for the BOW table saw fence reveal. Never knew such a thing existed. I was looking for an extender for my job site saw and this thing fits the bill perfectly - great pricing too. Thanks and looking forward to your CNC router journey.
Very nice and organized shop! Very clean and love that bandsaw. My only other comment is my concern about the unprotected romex cable running down the wall.
Thanks so much! Yes that bandsaw is a beast and yet very precise. You are right about the wiring but I'm very careful and originally I set up the shop so that it could be converted back to a regular car garage quickly. It's been like that for ten years and no issues 🤞
Hey there! Really simple, just 2 pieces of 3/4" trim screwed together 3" wide however long you need and then screwed to the wall. So the clamps basically hang on the ledge created by the trim. 👍
@@StudioZ72.create any chance you can leave a picture - I understand what your saying but am more visual - for the f style is there a lip they hook onto? Or they are flat on top for both clamp styles and gravity just holds them?
Well thought out. The fire place sounds nice! The curtain idea is awesome! It deploys so well. Do you use a drop cloth for the floor in the paint booth?
Thanks so much! No drop cloth on the floor, I just deal with the overspray which is minimal. Yeah, maybe next winter I'll have a wood stove in there for heat just weighing my options.
Nice shop! Love the bandsaw.
Awesome, Thank you!
Me too.
I'll never be that well organized, lol. My shop looks more like controlled chaos, but I know where everything is :)
I used to be really bad with the OCD, now I learned to turn it on or off when needed, lol. I keep the shop like that mainly for the channel, usually it's very dusty but keeping it clutter free gives me more space 😉
I love that it’s almost lunchtime all the time in your shop
Lol! I had to pull the battery while filming the clock ticks so loud! I ordered a new one recently.
Greetings Pete, Thanks for sharing your shop. I finally found somebody as OCD as myself when it comes to cleaning up after every cut you make 😂😂. I to am a full-time business furniture maker. I’m always searching for new ideas for workflow plus a clean well maintained and organized shop is also a safe shop. Best of luck in the new year. Looking forward to subscribing and following along. I’m ready for a shop tour myself last one was about 4 1/2 years ago how they change! its also a good method to catalog your upgrades and workflow 😎Well done👍
Hey Walt, thanks so much! Lol, I used to get teased about how OCD I am but now I just tell people that I put the same attention to detail in whatever I build and in our business details matter. I like your shop also, especially the plane wall. Good luck to you also, I too will be following along 👍
@@StudioZ72.create Now that’s a great line Pete.I may need to borrow that.😎😂👍 also, what’s your IG page? I was looking forward to subscribe, but I couldn’t find it. Thanks for visiting my channel. I really appreciate your support as well!
@theofficialstudioz
I haven’t posted there yet but I’m getting there, thanks again
Cool workshop nicely thought out.
Thank you! Glad you liked it
Thanks for sharing - Made me smile when you mentioned Norm's New Yankee - I am sure there was a whole generation of woodworkers that grew up with that. Such a shame there is nothing to replace it. I guess UA-cam is the new New Yankee. Thanks again.
Thanks, It's nice to hear from others that were influenced by him, I'm glad you liked it.
Great video…awesome shop.
Thanks so much! Glad you enjoyed it
I watched it with interest. Great shop and fantastically organised!
Awesome, thank you so much!
Great shop. Have me some ideas and I never have ideas!
Thank you
I like how much you're able to do in the small space and the principles you've used to manage that. This is a really great video, well explained, well produced. Can't wait to see what else you have in store.
Thank you so much! I'm glad you enjoyed it, most of what I do is all about the details which is what this channel will focus on, much more to come!
I subsribed. Thanks for the BOW table saw fence reveal. Never knew such a thing existed. I was looking for an extender for my job site saw and this thing fits the bill perfectly - great pricing too. Thanks and looking forward to your CNC router journey.
Awesome! Glad I was able to help, that's what my channel will be all about!
Great for of your shop. Any recommendations on a vacuum for the fine dust since the one you have was not avaricious to the public?
Did you mean available?
Correct.
Very nice and organized shop! Very clean and love that bandsaw. My only other comment is my concern about the unprotected romex cable running down the wall.
Thanks so much! Yes that bandsaw is a beast and yet very precise. You are right about the wiring but I'm very careful and originally I set up the shop so that it could be converted back to a regular car garage quickly. It's been like that for ten years and no issues 🤞
Beatiful vídeo
Thank you!
How are your clamps hanging on the wall? particularly your bessy parallel lamps 😊
Hey there! Really simple, just 2 pieces of 3/4" trim screwed together 3" wide however long you need and then screwed to the wall. So the clamps basically hang on the ledge created by the trim. 👍
@@StudioZ72.create any chance you can leave a picture - I understand what your saying but am more visual - for the f style is there a lip they hook onto? Or they are flat on top for both clamp styles and gravity just holds them?
Can't do pics but yes flat on top and gravity holds them. Also they lean into the wall a bit and that helps keep them in place.
Well thought out. The fire place sounds nice! The curtain idea is awesome! It deploys so well. Do you use a drop cloth for the floor in the paint booth?
Thanks so much! No drop cloth on the floor, I just deal with the overspray which is minimal. Yeah, maybe next winter I'll have a wood stove in there for heat just weighing my options.
How do you do finish work without a air dryer and separation system?
I use an inline water separator coming out of the tank and then a inline disposable water filter attached to the spray gun.
What is the square tool called you use to clamp onto your tracksaw for cutting square 90s
Hi, it's from TSOproducts.com and it's their guide rail square #GRS-16PE.
Thank you@@StudioZ72.create
what is the name of the curtain company?
Hey there, It is Akon LLC www.curtain-and-divider.com ,they are in Florida