Це відео не доступне.
Перепрошуємо.
How to Make a Smoke Machine
Вставка
- Опубліковано 26 бер 2018
- I got a Engine Check light on my 2003 Toyota Matrix, it was P0440 . That means I have a small leak in my EVAP system. Easiest way to find this leak usually to use Smoke machine and look for the smoke. As usual I wanted to make one myself. After looking around on the webs I got a paint can cleat tubing couple of connectors. I did not want to pay for Vape system wire, so I used the stainless hanging wire I had laying around. I did not get the smoke coming out of the problem area on my gas tank on video, but turned out to be a return from evap system to tank rusted out and broke off. I did not want to replace my tank so I used Gas tank epoxy to repair the area. After finishing I wanted to make a cheaper version with glass casing. Check out that video Here • Cheaper Glass smoke ma... }
Link to the wire I used how heater/burner www.homedepot....
============= Social =============
Email utkan@masterofnone.tv
Web www.masterofnon...
You can follow me on twitter / masterofnone_tv
Instagram / masterofnone.tv
Follow me at Facebook / masterofnone.tv
Buy T-Shirt or other merchandise at
www.masterofnon...
Disagree.. you are not master of none, you are the MASTER of all EVAP shows. THUMBS UP.
Thank you so, so much..you were precise, straightvyo the point.
HATS LIFT UP SIR.
BLESSINGS 👍👍👍👍👍👍👍
it's so sad that people are grilling this poor guy about what wire was used, if they just read the description, he gives you not only what kind he uses but where to get it and how much it cost. really!!! come on people, I know your smarter then that. I think people just like harassing other people. once a bully, always a bully. great video man. I understood everything, very simple, a child could do it. its common sense. it's called jealousy.
I am glad to see people making something that they need, rather than giving up because a commercially produced item is far too expensive.
Great job, and Thanks for showing how it worked! Nice video
Thank you. I appreciate your time! May God continue to Bless you!
Super clever and great job my friend!!😊
NIce video....This is the best break down I have seen on how to build one. Thank you!!
Great Video! You should have used JB Weld instead of a glue since the bucket tend to get REAL host and melt the glue!
Much appreciated, very clever, I was wondering how long does the wire last before you have to rewind it?
I like your small smoker as well,👍
Only used it for 10 minutes and found the problem on the car. So no clue how long it will last
Fantastic idea! This is not something I would have thought about. Ingenious I would have to say!
Auto repair places have expensive machines to generate smoke . As usual I am not getting my repairs done by professionals. I am DIY all the way. :)
Good job.
Why not mount a small fish tank air pump on the side so its all in one?
Very good!
Hi, can you tell me all the items that you use in this video to make the smoker thanks
Very good👍
Okay I'm with you now! I understand what you're doing only because I went through your drop down description of the video.
HI
Can you list the materials that you used to make machine? best regards from Spain
Thanks you
How did u NOT GET A SHORT WHEN U DROPPED THE WICK AND COIL IN THE CAN? THE COIL LOOKS LIKE IT RESTS ON THE BOTTOM OF CAN CAUSING A SHORT? JUST WEAR OVEN MITTENS SO U DON'T BURN UR HAND! HOPE U HAVE A IN LINE FUSE FOR PROTECTION!!
William Scheidt it's just long enough to dangle and not touch the sides or bottom
For this 12v DC setup: It doesn't short because the resistance of the oil is so much higher than the coil itself, even as the coil builds heat. Heck, I think the oil even has higher resistance than our own bodies.
Nada más tu sabes que estás haciendo
so the rubber grommets were enough to insulate without melting?
bubba dam yes they are. with a reminder that it is not for long runs(you should find your leak in 5 min usually)
Amigo que tal como se llama ese material blanco al que enrollas el cable al inicio del video
Es un tipo de mechas para antorchas en ingles se llama torch wick (mecha para antorcha)
Great fix!
Thank you Marcel
Did you hook it to your car bsttery?
Yes
Holy smokes!
That was neat!
You haven't slowed which battery your using,the negative positive wire should not be passed through the tin cap,it should be insulated
Is there Any way that you can Let Me Know Where to fino them
Amazon , look for "AutoLine Pro Automotive Smoke Machine Leak Detector EVAP Vacuum Diagnostics Tester "
Why did you not explain what you were doing/using?
You did a very good job on this video but I still didn't get the part what type of wire did you wrap around that cloth keep up the good work
Link to the wire is in the description
A cheap soldering iron?
What's the voltage, resistance and thus the amperage your using?
12v,5 Ohm , 2.4 Amp
Whats the wiring that your using and whats the white material u wrapped with the wire
Link to the wire in the description. White thing is a wick for tiki torch
Good job
Where did you buy that metal can?
Home Depot
list the part new please
congratulation
Can copper wire be used instead?
I have not tried it. Let us know if you do.
What king of wire u used
I have a link in the description for the wire. Thank you for watching
1 PSI MAXIMUM PRESSURE ON EVAP SYSTEM
What material in blue paquet?
Tiki torch wick
Whats wrong with this video? The most important part of the assembly is buried in the description and then the description is scanty. The most important part is the wire. What gauge, what material? copper?
I used Nichrome 60 (28 GA) at a length of 9 inches for mine. No battery was able to produce steady power to make it smoke though. I’m running it with a lab power supply.
no thanks we do not want to see a cheaper version the expensive version was bad enough
Hi nice video . Can you Make me one I will buy it
you can have this screen used version if you want, just pay for shipping .
Can I have yours? 🙌😗
It's long gone . Sorry
WARNING must be watched muted because of inappropriate mind numbing vomit inducing background musak.