2007 - 2014 Dodge Avenger Amp and Sub Install
Вставка
- Опубліковано 2 жов 2024
- Parts used linked in the description below!
Watch a full tutorial as a 2009 Dodge Avenger will have an amplifier and subwoofer installed. We will be installing a Rockford Fosgate Single Channel Amplifier and a Rockford Fosgate Subwoofer.
This video applies to Dodge Avenger models for years 2007, 2008, 2009, 2010, 2011, 2012, 2013, and 2014. This video also includes , complete installation, amplifier wiring, and testing.
Click here to see how to install the radio used in this Avenger:
• 2007 - 2014 Dodge Aven...
Click here to see the back up camera install on this Avenger:
• 2007 - 2014 Dodge Aven...
For the amplifier kit used in this install, click here:
• Soundquest SQK4ANL 4 G...
Click here to see the Front Door speaker replacement video:
• 2007 - 2014 Dodge Aven...
Click here to see the Rear Deck speaker replacement video:
• 2007 - 2014 Dodge Aven...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate / eBay Partner Paid Links):
*Rockford Fosgate P400x1 Punch Amplifier: ebay.us/x2wc4B
*Rockford Fosgate R150x2 Prime Amplifier: amzn.to/3tKOjkR
*4 Gauge Amplifier Wiring Kit (x2): ebay.us/357mPU
*Rockford Fosgate P2D2-12 12" Subwoofer: amzn.to/34oOXeW
*12" Subwoofer Box: amzn.to/3d9L8vl
*The Epicenter by AudioControl: amzn.to/3Kp2zGw
Radio install Parts:
*Pioneer Blueooth Radio: amzn.to/365sQY4
*Metra 95-6511 Chrysler/Jeep Dash Kit: amzn.to/3dngoab
*ASWC-1 Steering wheel control module: amzn.to/3ilRprp
*American International CWH-642 Wire Harness: amzn.to/3hOoWsD
*Metra 40-EU10 Antenna Adapter: amzn.to/2UKAuop
*Pioneer Parking Brake MicroBypass: ebay.us/RVf61w
*Backup Camera: amzn.to/3csfJn3
Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases - Авто та транспорт
Parts used linked in the description of the video!
Thanks for the video
perfect your job!
. How did you do the big 3 Wiring on this Car ?
ya ok, there's NO way I would be able to do this; I have no patience even for my home receiver lol lol; you make it look so easy. too many cords I'd just leave it hanging out like it is lol; think I'll get it professionally installed. Guess I don't understand stereo systems very well.. (which would help, right?) lol
Real ez if u take it one step at a time.
Does anyone know what that rubber grommet is actually called? On a 2014 those are installed the other way around. When I tried to put through it, it popped out into the engine bay somewhere. Now I need to fill a massive hole. Please help!
Can you make a video of how to connect a remote wire to a cigarette lighter
do you need to upgrade the stereo? i have the touchscreen stock sirius xm stereo, also, how much money do you think i should sink into a 1 amp 1 sub system
I was going to remove my amp and subs with the wiring but I would rather not lmao. Seems way difficult and if the guy who installed it actually connected to my battery then I’m totally not removing the wheel and bumper just to access it. I’ll just leave the wiring in I guess, maybe the next person to buy my car will use them
donde te encuentras amigo quiero lo mismo para mi avenger
Provo beast please please help me. I'm a female and I like to learn new things, however I initially got my beat hooked up at Arden audio . Everything was cool untill one day I was having problems with my car starting as well as kept blowing the inline fuses, thought that those problems was from the way things was hooked up or wired. So I unhooked my after market head unit and another wire that was connected to the lighter portion of the car .now I can't fix it back . Please help me cause Arden audio will charge me too much.
i was looking at a dodge avenger at a dealership. they want $9359.00 for it. it has 104,000 miles on it. i test drove it but i was wondering if my subs that i had in my 2014 ford taurus would fit in the dodge avenger......not sure if you are familiar with the Q bomb sub box, i had 2 12 inch rockford fosgate P3's with a 1200 rockford prime amp.
By any chance do you remember what kind of aftermarket rims these. I'm looking for some like those
My 2010 Dodge avenger don't have the same entrenar for the negative cable how else can i put it thro
Great install video, thanks for the help!
Does the factory head unit support av cables for the amp and sub
No
I have a 08 charger that I had done and it was fine but a hour later my car won't cut back on I think I'm going to take it to the dealership to get fixed asap i tried everything but my car still won't turn on
Hi, can a subwoofer can be installed with the original stereo?
Yes, however a line-out-converter is required to provide signal from you factory radio to your aftermarket amplifier.
Good video
I want to hook up my amp and subs to my stock head unit, but i'm having some trouble figuring out what wires on my stock stereo i should connect the line out converter to and so on
is there some sort of diagram or something
Sure, but i need to know your year, make, and model. Also, this will also vary if you have the factory Boston Acoustics Sounds system too.
awesome
i have a 2013 dodge Avenger SE with a stock head unit (Like the one in the link). No Boston Acoustic system
Https://www.amazon.com/Chrysler-2013-17-Radio-Single-P05091195AC/dp/B079SW3QGV
www.modifiedlife.com/2013-dodge-avenger-car-radio-wiring-chart/
thank you guys sooo much looks like i got my self a project this weekend ! SUBSCRIBED!
What wire do i cut to install the Converter in my 05 dodge avanger
I have mine hooked to my factory radio and I’m having an problem with my radio randomly shutting off but we can’t seem to figure the problem any advice ?
Sounds like a wiring issue to me. Recheck all your connections, make sure your line out converter is wired correctly, etc.
Okay thanks
My dodge nitro has a factory amp so the amp I installed doesn’t work well... how do I fix that? It’s a 2008 dodge nitro RT
Do you use multimeter for gain leveling or oscilloscope?
Yes. But for those that don't have one at home, there are a few other ways to tune your amps: 1. you can match the gain voltage with the output voltage of your radio. Typically PIoneers are 4v so set your gains on your amps at 4 volts. Also, you can turn it up until distortion, and then back it off. Of course, the best way would be by using a DD1 Distortion detector or an Oscilloscope.
do i have to change my head unit i have a 2009 stock radio an everything do i need to change anything or can i plug in my amp an subwoofer like u did
Just a line out converter if retaining the factory radio: amzn.to/33lRh5u
Have you uploaded a big 3 on this car? I have this exact car and have had electrical issues before, and i feel like a big 3 upgrade will help a lot. Plz upload one
Where can I purchase a smart harnesses
6:55 how tf did you fish it in there???
Are you still a UA-camr have a ?
We still create content today, yes. See our newest videos.
How to install a 2 channel amp
I have a vw touareg and aftermarket head units that work with all 11 speakers and the factory digital amp to avoid rewiring the entire system are impossible to find basically. I found an android based unit that works with the factory digital amp and all speakers work but there is only 1 rca out for an amp.
I'm only planning on running a single sub, do I need to buy an rca splitter or just connect 1 rca lead, say the right or left one only or do I need to have both right and left connected? thanks
Yep, get a splitter as your amplifier is looking for a dual RCA input.
did you have any problems with headlights dimming because my headlights dim bad when bass hits
No, because of two things: 1-we upgraded the alternator wire from the alternator to the battery, and 2-we had a healthy battery. This would help stop the dimming of lights.
mine does this too 💀 just when i use the windows
should make a video on how to teach this guy to clean his car lol ha ha.. so gross.
He literally says in the video it's not his
What if you're installing Subs and an Amp to a factory deck that doesn't have any RCA outputs? Would I have to buy a new head unit? I've watched videos that speak about an output converter and attaching it to the rear speakers , but I figured I would get a better sound by connecting it to the Head Unit. Any Suggestions?
A line out converter will be your best move, whether you connect it closer to the radio, or to the rear speaker lines, it will not make a difference. If you want a direct connection to your radio, you will have to replace it. Some people still want better sound quality but don't want to replace the radio so the alternative is adding an audio processor.
Provo Beast Audio Installation This is a first for me, but I have a head unit, i just dont have an installation kit for it or any type of wires. I figured i would just connect it to the factory unit, but common sense tells me that all of the sound would be in the back if i connect the converter to the rear speakers. If i wanted to amplify the car speakers as well, would it be better to attach the converter directly to the head unit?
You will need a wiring kit to hook up a sub and amp. What do you mean by all the sound in the back? Are you talking about amplifying the rear speakers or adding a sub? To amplify all interior speakers without replacing the radio, check this ford truck install where i did that. it would be easier visually to show: ua-cam.com/video/zcPxAnZ8lUE/v-deo.html
At this point
I thought you couldn't run all the cables together down one side
Mel James on 4 channel amps you shouldn't.
Mel James subwoofer amp doesn't really matter
The power wire was ran down the driver side, the rca, speaker wire, and remote turn on wire down the passenger side of the car. The remote turn on wire is a low amperage wire and will not cause any issue.
what if your back seat dont fold down
You can mount your amp elsewhere, but the install process still will be very similar.
Love your videos!