Це відео не доступне.
Перепрошуємо.
$29 Gas Monitor Arm Review
Вставка
- Опубліковано 29 лют 2020
- This review follows up on my Sceptre C30 unboxing and review video available here ( • 30” Ultrawide by Scept... ). This is the Mount Pro PR1001-1 and supports up to 14.3 lb monitors. Flexible installation options include through-hole mounting or clamp mounting.
If you're looking for a dual monitor arm - I've just reviewed the ATUMTEK version and LOOOOVE it. Very adjustable and 28.5" maximum arm height is almost like a sit-stand workstation.
• $85 Dual Gas Monitor A...
If you want to buy one of these single arms, consider using my affiliate link:
geni.us/tng-si...
Check out my dual monitor video:
• $85 Dual Gas Monitor A...
Sceptre C30 / 200hz - geni.us/tngdc
(my favorite ultrawide right now)
XFX RX570 8GB - geni.us/YukKD
(very solid graphics card for cheap!)
EVGA 500W Power Supply - geni.us/tng-ev...
(similar to the power supply in this video)
Crucial MX500 1 TB SSD - geni.us/tng-ss...
(my favorite SSD!)
Music Credits:
BenSound.com
PurplePlanet.net
UA-cam Audio Library
timestamps
0:05 - 0:51 Introduction and explaining how the monitor arm benefits you and your setup
2:36 shows how the arm clamps to the desk in the instructions
3:25 -4:02 explains how the arm attaches to the screen and how the arm is held up
The rest of the installation tutorial is great but I don't need that right now because I'm just trying to explain to my parents what a monitor arm is
13:05 see how much more space there is on the desk area vs the stand that comes with the screen? See how easy it is to organize cables, and plug them into the screen..
14:27 using the monitor on the computer. looks more comfortable vs straining the neck to look down
Beautiful my friend! Thank you!
The bottom screws of the VESA mount isn't securely screwed in. Its looks loose there. 13:16
Eagle eyes my friend! It’s actually down, but the way the C30 works it has a bolt in the middle that prevents it from being totally flush. I think I’ll do a review update soon.
His voice. The music. The shirt. This man is all about peace and joy. Thanks for uploading.
Thanks Aaron! And to think I almost didn’t release this video :)
You forgot the epic beard
@@luv2stack love it!
Feels like a massage studio
Not sure if that’s a compliment, but thanks!
I swear I have never seen a more wholesome person in my life u earned a sub
You made my month man! Thank you for watching and I hope you enjoy the newest videos from this season. I'm dropping a video later today too.
Love his shirt I used to watch him paint
The second I saw this dude and the bob ross shirt I instantly went "ok this guy is happy as -hell- heck
FBI is always watching
"This is attached now, nice and firm."
Literally still wiggling as he puts slight pressure on it.
Guilty as charged :) The ATUMTEK dual arm version I just reviewed is a rock. This one is still an excellent budget choice though.
@@TheNetGuy it's 20$ more
@@distortimus7631 $20 for more RGB Lights lmao
@@sneakynation1414 I'm being cheap on buying monitor stand, whilst I just ordered a synth worth 2.5k 😂
This is the perfect video really.
- on point color grading
- great low and slow voice
- set-up tutorial.
Needless to say, I bought it and am loving the taller height and increased desk space.
Loving the comment! I always feel like I should speak faster like the other ‘tubers. Glad to hear you like it!
The smile on his face when he finished wanted to make me cry tears of joy this is the best review I ever watched I had to drop a sub have a great rest of your life 😁❤️
Double love my friend! Glad to have you hear and I really enjoy making these for you.
If someone asks u if ur new or u just came and says Welcome Back (Give this man an oscar)
Glad you liked :) Thanks for watching!
Hi , it would be cool to see more of a full range of motion test. Also review after a half year or some time would be cool. Like if it doesnt breake or if the gass spring don't breake. Cool material, but you can do second review now to maybe let people know about those two things, because i was particurairly looking for that. Also if the screw dont get loose in a place where you mount it to the desk. This are technicall details which you can know only after you get equipment like that. So i would definiatelly apprecaite seeing those in a video
:) and im looking forward to video about that ;)
thank you so much for this tutorial and how thorough you were. i have this monitor and this mount, and since the adapter situation on the back of this monitor + my issues in the past with monitor mounts, i wasn't feeling super confident about installation. this really eased my fears and everything looks great!! you rock!
Thanks for the review! I can't really justify spending $150+ on a monitor arm. This one looks good.
It’s a great arm. Review of their sit-stand desk topper coming soon!
I needed this video, well done, thank you. Subscribed.
I needed this comment. It made me smile! Glad I could help! Enjoy and lots more to come!
The easier way to clamp the arm on your desk was perhaps joining the two clamp part (with the two small screws) prior to fixing it on your desk. Thereafter, taking the entire assembly together and tightening the clamp screw until the mounting is sturdy. Nice arm though.
Came here from the review of this monitor (i just ordered it today from amazon lol), I really like your presentation style, beard and how you explain things. Subscribed!
Love your origin story - as good as any marvel super hero ;) Seriously though, thank you for the kind words and subbing. Really cool stuff coming soon. Let me know how you like the monitor when it arrives!
Yo I'm sold on this stand shits cool and second the beard game
Thanks for the great review.
Any feedback after almost a year? Did the stand hold his promises?
Thanks for the video. I enjoyed the calm demeanor and background music a lot. Will make referring to this video as a reference when I install my new setup a bit more enjoyable as someone who can get frustrated by technology easily.
I loved your thoughtful and rational comment :) thank you for watching, commenting and subbing!
Thanks for the video... I have the same Sceptre monitor and am going with a similar monitor arm. Just got my Apex Desk assembled and even with the electric lift I found that I still need a height adjustable monitor arm.
Bought this monitor arm and it didn’t come with instructions! I checked for them everywhere. Thanks the detailed setup walkthrough, following the video I was able to set it up with no issues
i didn't know how to adjust the spring, i was kinda bummed out and was looking for another arm to hold my 34 inch monitor. Thank you, you saved me few $
Thank you for this video, just ordered this mount for my new set up! I hope it works out well. Looking forward to watching more from you!
You should enjoy it. Remember to tighten the tension settings to keep heavier monitors raised up - there is an Allen screw I should in the video. Looking forward to Season 2 coming soon!
Joe Perry I got it about a week back and it’s perfect! It’s much more elevated allowing more space on my desk. I highly recommend it.
The Bob Ross of tech reviews. Loving the vibes ma man 🙏🏻🙏🏻
Dude, I just subscribed to your channel and gave a like just because of your spectacular Bob shirt.
Thanks man , i have almoast the same model , and this help'ed me figure out how the spring works :)
Glad it helped!
I have been looking for a video where this monitor is being mounted. Thank you! I now have a mount I can buy for this monitor!
Thanks for posting, just got the same one as part of my new home office setup. I appreciate your work. Thanks again!
Awesome Ramón! Thanks for watching and I have a lot more coming soon!
Very calm and very straight forward honest review i really like it!
Another video launches tomorrow - and I have a dual gas monitor arm coming up!
Thank you for the video! exactly what I needed!
I am trying to look for something under $50, would this one be your best recommendation? My only two concerns are the stability and the ability to be parallel with the wall since I want the monitor to take the least amount of space possible
Yes, definitely recommend this one. Are you going single monitor or dual? If dual there's a different mount I think is in the description.
The quality of your videos is outstanding! Keep up the good work
I appreciate the compliments! Believe it or not I just invested in a single lens that’s worth more than my camera! Season two is going to raise the bar again!
Thanks looking at getting one of these arms.
I still prefer the North Bayou mount but that Chechen carpet beard is extremely well-mounted under the dome.
I love this guy, he's so damn wholesome.
The feeling is mutual. About your comment of course 😉
@@TheNetGuy Holy shit...you respond fast. You've got yourself a subscriber :)
Thanks! That’s what it takes, one by one☝️ Doing a livestream this Wednesday of a new MSI gaming laptop and some other cool stuff is in the pipe 👍 still wholesome, but the newest videos from my new studio are a whole lot cooler 😎
@@TheNetGuy Now this, this is next level.
i have the same monitor stand if you look at the bottom of the arm there is plastic that clips off for cables to run thru, though this would help
I like that we can see from the time on the Monitor that it took less than half an hour to install even with filming added in.
Brilliant observation. And filming and lighting, sound and etc all takes a ton of time. 😉 I just did an Amazon Live for their new products. Still have a giveaway going with great odds if you need one of these. HTTPS://amazon.com/shop/thenetguy
Cool, I got a 27 inch Sceptre monitor. I am getting a VESA mount next month,
Just ordered this a few days ago lol now just waiting on my desk so I can install 😁
If you bought a cheap arm monitor stand and it cant lift your heavy monitor up just use a zip tight and tight the arm so it locked into position
Just bought this arm... used your link btw! Hope its good.. comes to tomorrow. Thanks as always for the good videos.
Thank you! Remember to tighten the adjusting screws down to counter the weight of whatever monitor you have. So far it’s been working great.
@@TheNetGuy I've had it setup for a few days now its great! Ill buy another for my second monitor soon.
Thanks for the review video.
Far out! I have another video about to drop - hopefully tomorrow. Not for the faint of heart - soldering on a laptop motherboard. Aye!
dude no lie. this video helped me sooooo much in the first 10 seconds holy thank you
The shirt is way too awesome. I need one!
I just bought a dual arm version of the same cheap arm and after purchasing read some reviews. They were horror stories, but usually people don't elaborate on things they did incorrectly. I'm a little worried but your video just made me more confident. Thanks:) Maybe I'll do an install and review video also. You get a sub for being chill. Take care:)
For sure! People rarely follow directions and almost never adjust them properly. Good luck!
Howd it go
I'm buying this mount for my Gigabyte 34" ultrawide, awesome review, if Señor Ross trust u, there's no way I couldn't, thanks again for the review
You’ll love it! Congrats!
At 2:48 my question answered.. brilliant
Thanks for showcasing all the steps a regular user would do! Some reviewers edit out the build process
This is the first video i have watched of yours. Super chill vibe, keep up the great content. Subbed!
Thank you!!
A nice video overall. A very careful explanation. With monitor arms, the quality of the clamp is key. Strenght and grip of the clamp, besides a nice surface to hold, are the base to give it stability. Humanscale Furniture has a really good minor arms. For NYC enthusiasts is available in Manhattan Office Design.
#OfficeFurniture #NYC
Hey brother did it come with the adapter, or did you purchase that separate
Oh my goodness I thought your beard was fake. Sorry sorry sorry. In other news I built my 29 dollar Sarah Connor terminator arm...er mountup monitor arm as you were building yours. This was incredibly important. Display wise, I only had a 43 scepter, and two 52 inch TCls monitors (none over three hundred dollars!) as my primary display for my gel mesh serta 4x recliner workstation. It was like living in a cave. Obviously I needed an additional 32 inch scepter moniter for folders and what not. Now I never have to alt tab! Oh and I have a mini air conditioning floor unit I call Artoo Detoo which I've set up so when my recliner is reclining, I can move the vents with my toes. I don't understand why everyone doesn't do it this way. It's just better and not excessive in the least bit.
I actually have this stand and didnt know how gas arms work. Big thanks
You bet man. Just make sure you adjust the preload and it’s awesome.
Now, let's put some happy little monitors on it.
Thanks! 😛
Hello John, I have two questions for you;
1) How/what do you use to shave your head?
2) What product are you using for your beard?
Great questions! I use Edge sensitive skin shave gel and go between a Harry’s razor and Costco’s new Kirkland blades. Costco’s are very sharp and tend to take off more than hair!
Beard 🧔🏻 treatment is a beard shampoo and conditioner, then a leave in. Still looking for new products!
Not annoying background music. Have a like.
I know right!?
Thanks for the review, I saw this On amazon. Thinking about buying it.
Can’t go wrong. Friday I’m posting their sit stand desk converter.
Thanks for the vid gonna buy one with ur link , also one thing, this stand has cable management built in for a clean look.
You'll like it! Thanks for commenting and watching!
11:45 they way he stood up😂
You should see me kip-up. Like a ninja!
I subscribed the moment I saw your bob ross T shirt. But his fro was more real than your beard.
Aweeeeeee I’m workin on it!
The review begins at 14:53. The rest is unboxing and installation. I would have appreciated it if that had been communicated to us in the beginning.
You have such a good vibe it makes my day better. Thank you I am getting ready for christmas
I subscribed
Didn't know that Keemstar started doing regular reviews?
Jokes aside, great vid! very informational,
I'm planning to get one to save a lot more table space as this AOC C24G1 has such a space consuming leg.
Nevermind the stand, that beard though!
Great review man!
Glad you like!
Just bought this but my monitor is unleveled. The sliding bracket that holds the monitor and attached to the monitor arm has too much play between it. Very unfortunate because I like the price of the monitor arm
Amazing Video................ is this mount is specific for desk or can be use on the wall ?
Brilliant video was a bit skeptical on buying it but after this video anymore.
Great value for the money. I really need to do a monitor arm special!
Basically came to see what kind of Vesa the Specter came with as I'm considering it as a upgrade from my current 2560x1080 LG for the higher refresh rate and low frame compensation.
The Sceptre C30 uses a custom vesa mount plate. Don’t lose it!
@@TheNetGuy Ye I figured it would be, but I wanted to see it visually so I'm glad I found your vid. still deciding between a few options so. :3
Ordered from amazon and waiting for delivery and i was looking for videos about it and i found your very good video you got a sub from me sir =)
You won’t be disappointed - in either choice! Thanks for the sub!
@@TheNetGuy Got it delivered yesterday so right now wanted to install but there are missing parts there is no bracket so no way to install it to the desk i'm so mad now my time is wasted cuz i have to send it back to amazon
Shoot! Was it from Amazon warehouse? That’s odd for them to sell used as new.
@@TheNetGuy Shipped by amazon sold by Mountup and i wasn't open so its new they just didn't place the items in the box
Uh oh - should be from mount pro. Similar name but different company. Here's the link: geni.us/tng-singlearm
Most are very similar. That sucks though - Amazon will make it right quick though :(
Thank you so much for this video! I'm buying a monitor stand that is identical to this. Thanks for making it
Thanks for watching Tyler! Other great videos coming, Season 2 drops on Wednesday!
This helped me SO MUCH installing my AVLT-DM03-1 single arm desk mount. However, mine came with a 'cable' that lamely shows me how to thread it through the cable management cover, but once I get the cable through the two covers I'm not sure if I have to secure them to something on the monitor and on the clamp? Do you have any videos on that type of install? Thanks again for this complete video, especially the part about adjusting the tension - game changer for me!
excellent review I about to buy monitor which needs to be mounted with this arm!
this is a nice cheap upgrade for any setup, good vid man keep it going
Perfect! Just what I needed.
Thanks for this video.
All i got to say is.... Love the shirt. Oh and great review I ended up buying this mount and its great specially for the price.
I really liked the way he is presenting..
Is there anyway to make the stand longer/higher?
No, but my Atumtek dual stand review has a full 28.5" height to the VESA arm - AMAAAAAZING. Check it out on my videos page.
Subbed cuz you are like the bob ross of computer tech
hows it holding up after two years? i have a 32" monitor weighing in at 14.33lbs so right at the max weight for this arm.. i;ve heard these budget arms are prone to failing at the gas strut where it will no longer support the weight of the monitor after a year or so? what's been your experience so far?
Where did you get that adapter mount? The one you slip on at 8:25? Was that part of the kit? My Sceptre 30-inch curved never came with that.
I just looked for mine as well and could not find it!
Also cannot find a replacement online at all. Super frustrating! I contacted Sceptre support. Hoping they can send out a replacement!
Sorry gents, it should have been in the box. If you need it, Sceptre will send you one, just contact them. 👍
I love the way you introduced the channel and explain asking for the likes at the end, im definitely fallowing you man
Thanks Jose! Always great to hear feedback - I hate to beg for subs, but it’s how you gain an audience on UA-cam. Love making videos for you all.
@@TheNetGuy i understand and i think we all know it but its the way it gets in the middle of the content your trying to watch what i think it bothers us the most and you definitely nail it, not to mention the content it self is also interesting enough to keep you hooked till that moment when you ask to sub
World class ASMR content.
Hey! I was wondering if this would last long, I've seen some reviews about how the monitor was laying on their desk because the arm broke within a 2-3 week period
Oh goodness I’ve never heard of that. These arms have lasted years for me. Never a problem with them. Are they adjusting them properly?
Monitor arm is convenient ✨
I also use two monitors with monitor arms attached.
The video was also very easy to understand! I also studied videos. Thank you. With love from Japan :)
What’s the range of motion for the VESA amount itselft? 180°? I’m trying to get my monitor flush with the back of my desk because my current stand pushed it out too much. Your content quality is great by the way.
I subscribed JUST for the shirt alone :)
Have the same monitor thanks for the video extremely helpful!!
Thanks for watching! Hopefully I did it justice.
Just bought the 2 arm one with your affiliate. Originally I was looking for arms that sit flush against the wall so I won't need to bring my table back, this looks like just that.
These things are amazing. Let me know how you like them. Fit and finish is the best I’ve seen!
@@TheNetGuy They're definitely solid but I really should've bought the 1 arm twice rather than the 2 arm. Doesn't sit as nice with the wall but hey it works. Thanks for the tutorial by the way.
Thank you, great video.
Glad you liked it!
This guy is upside down Bob Ross
The adapter comes with box? becouse i have 2 27 curved screens. i just got a "exspensive" mount and i cant use that for my primary monitor. both my monitors are samsung 27 curved, one of them is 144hz and second one is 60hz. i was not able to mount my primary monitor becouse screw holders on monitor was not same as mount screws. so can i use this 29$ arm for my main monitor?
I have not built a computer in years and found his channel looking at SSD installations, and got stuck here watching everything else.
Thank you!!!! Lots more good stuff coming!
I have a 20 inch deep desk and a 17.3 inch deep mousepad would this be able to clamp on my desk without touching the mousepad
Great vid, but just one gripe. It would be nice if you would show the full extension and rotation of the stand. After watching the video I’m still unsure if I can bring the monitor as far forward as I’d like.
I appreciate the feedback Malek! The arm does have amazing forward movement - if you look at the angles of the individual arms, it does move straight forward about 12”? Shoot me an email and I’ll send you a picture!
wish you played around with the monitor at the end, instead of playing games, I wonder how much movement it has and if it can be stretched more so I can watch movies from my bed.
It’s got really good range of motion. I did some live streams for Mount Pro and you can see he range better 👍
i have a 15lb monitor and i fulling tightened the tilting screw and it keeps falling
Helpful info. Thanks for taking the time.
I’ve got a new video from the same company on their standing desk converter coming out in the next 24 to 48 hours.
Great video I ordered the adapter mount from a Sceptre and was wondering how it went on thanks
I have this mount and love it.
Nice chill video thanks I just bought it
wishing u a happy and long life!
🙏
Very amazing video help me install my mount desk very easy thank you and keep doing more videos like this
wait so because it's spring loaded, you can't constantly adjust the arm height to mimic a standing/sitting monitor? You have to adjust it with an allen if you want constant adjustments to height?
No, the gas strut and spring work together to make it zero gravity. You can reposition it as needed without adjustments. You just need to initially set it.
ordered the same one but doesnt have that mount mine is setup with a adapter wtih the screw in the midlde and screws on all 4 sides
Thx brother! Just bought one using your affiliate link.
I just installed mine on my 5-year old monitor; makes a world of difference! Can't believe I was using my monitor without a control arm for 5 years.
I stopped just to write a comment and thumbs up on your thumbnail.
❤️ I’ve got some new people im trying out. Hopefully they get better!