Be one of the only few who support and find value in my videos. Please spare some change to help the channel keep moving forward. www.buymeacoffee.com/ersbit
This was really helpful! Can I ask where you got those gloves? They do they provide anti static or was it just to protect your hands from the heat gun?
Un the video below I showed what to do to avoid having the notification of none genuine parts (battery). This process is more involve and will require more more and tools. How to Replace iPhone 15 Pro Battery and iPhone 15 Pro Max ua-cam.com/video/yWoaSS7NkWU/v-deo.html
Your instructions were excellent. I messed up when taking out the OLD BATTERY and that half circle covering came off and I ripped through that band of wire. I cut right through my flex cable wire. It goes underneath your phone and mine had a protective covering over it. I cannot screenshot anything or turn my phone off now. What parts does one need to fix that? On 5 min 44 sec of video shows a great pic of the inside of the 1/2 circle of tape covering that band. I put my new battery in pulled off the tape. The NEW BATTERY has to come off again. Yeah so two things I cannot do is : 1) turn off my phone 2) take screenshots. I’m assuming my battery was defective and would get hot often . So the backside of my battery looks like it has tape melted on it. On the bottom back side. So it looks like I have to completely disassembled the entire phone in order for this to be fixed. Can they weld that brown band that goes across width wise east to west or west to east for the flex cable that I cut off?
Hi very sorry to hear something like this happened. Seems like the button and wireless coil circuit is damaged. They are one piece. If that is the only cable damaged you can replace it by removing the motherboard and a bunch of screws to access it. It's one of the last things buried inside the phone. After replacing it everything should come back. It's possible to weld but you'll have trouble finding someone who can do it properly. It's not worth it...the guy would have to disassemble the phone either way and remove the broken parts to solder them. On the inside the heat might damage something else if he solder it inside the phone. The best way is to do the full teardown and replace the part. I have a video for the teardown of this iPhone 14 Pro. Be very careful and organized if you try it. Don't pull any cable with force....pull slightly and look etc.... The cable for the 5G antenna is also very badly positioned which makes it easy to damage. It is a cable right above the battery going from the back of the motherboard to the other side of the phone below the power button.
@@ersbit yeah so when I pulled the old battery the Volume , Power on & Off Flex cable ripped right through. I saw that for sale on iFixIt’s site for $30 US Dollars. From the additional heat from this defective battery I wonder if that made it inevitable that this procedure ripped my flex cable clean through? It looked like duct tape on the underside of the old battery. Then not realizing THAT I foolishly put the NEW BATTERY over the ripped flex cable . I put the new aftermarket battery back in not realizing I damaged the flex cable severely. Then I charged up my new battery. I’ll watch your video too but didn’t think I need to dismantle everything and like you said it can be spot welded. If you do not buy the original battery you cut the anode and cathode off the old battery to spot weld that back on. I saw that on his channel being 4 min 15 sec long using the SPOT WELDER. So that Seesii Brand Spot Welder looks really slick. I need to practice welding some samples first. Now another mess is I best wait until my battery is completely dead because that flex cable is a open circuit and in order to take out the NEW BATTERY with that new adhesive normally you use isopropyl alcohol. Well that is all good and dandy to use when battery is completely dead as that is THE ONLY way to SAFELY REPAIR this. So if I use isopropyl alcohol to allow ease of removal I need to be 100% certain battery is COMPLETELY DEAD before using any isopropyl alcohol. The current will short something else catastrophically and do not need that. So if I can salvage taking out my NEW AFTERMARKET BATTERY have to cut the CATHODE & ANODE to that old battery and also spot weld that too because I have that APPLE doesn’t recognize something with this aftermarket battery. So I already cut the cathode & anode to the old battery.
Conclusion, it doesn't do any bad to the phone. When you are ready to try a repair, I recommend that you turn the phone off before proceeding. Best practice is to have the device off before you do anything repairwise
iPhone 12 mini and iPhone 12 Screen Replacement Repair Guide ua-cam.com/video/aGGkhx98k64/v-deo.html Here's I did the screen then battery from another iPhone 12 mini still got the unknown part notification
The easiest way to avoid having that notification is to have the battery replaced by Apple they will reprogram the battery for you and no unknown part will appear. The other solution is to cut the leads of the battery and resolder them on a new battery the leads and connector will be the same as the old battery then you won't have the notification "unknown part"
No the health star will be disabled unless you remove the small board on top of the battery and solder it on the new battery (more work). If you simply swap the battery it will work fine but you'll no longer have acces to the health stats.
Id rather use my lcd screen heat pad, saver than using a blow torch that has excessive heat 🥵, I do get the overting showing up on the iphone you are repair, this could damage the cameras as thy are sensitive.
iPhone 13 Mini Back Glass Replacement Repair ua-cam.com/video/jRXG-sXc9yU/v-deo.html Here I thought the camera would get damaged after all the heat but it is fine no problem.
I am not sure this is possible. They tend to change the connector of the batteries to make sure it's not backward compatible. The iPhone se 2020 battery does not connect to the iPhone 8 battery which has the same size and fit perfectly inside the iPhone se. The 13 pro max and 14 Pro Max might be the same but I am not certain ( these batteries have the same size and shape but the connector might be different) If you search online and you find a battery that has title 13 pro max and 14 pro max so they are interchangeable but I highly doubt.
No I know....check my Pixel 8 Pro back glass replacement. There alcohol 99% is required. Here it is not required and I'd prefer doing it with heat than alcohol. True alcohol should help and have the same effect as using heat like I did 😁. Check the Pixel 8 Pro video to witness the absurdity they did with the back glass 🤣
@@ersbit fair enough, I’m no expert. I’m getting pissed off that there isn’t laws mandating user replaceable batteries on ALL electronic devices. Europe was worried about usb c, meanwhile 90% of shit is extremely difficult to repair if at all (ie like phones, most in ear headphones are all glued together). There is no reason this couldn’t be designed to be more easily replaced at the expense of a few grams weight.
@@supernielsen1223 so, just keep producing disposable electronics… it’s absolutely possible to produce 95% of consumer electronics, maintain IP dust and water ratings with user replaceable batteries. Phones, laptops, headphones, torches, scooters etc included. It simply won’t change unless laws are changed to mandate it. A few machine screws around your phones back cover might ruin the clean aesthetic - meanwhile 99% of people I know cover their $1800 phone with a $20 case. Humans are idiots. Simple solution to extended the life of every device, and making it user serviceable. A back glass on an iPhone pro max is like $800 to replace. Funny how the GoPro is a hardcore action cam, designed to take a beating. Which has a waterproof door, with replaceable batteries….
Yes. But if you don't you'll get only the notification to scare you but the device should function normally. Buying a programmer is costly and is maybe x5 price of the battery.
Yes. Best practice wants you to turn the phone off. I agree with you. I have the phone ON because I am monitoring the heat level / screen réaction to heat as I heat the screen. There's a a few seconds before the screen burns and get damaged. If you caught the screen during the beginning of this process you stop the heat source you will prevent the screen from burn damage. This is the reason why I have the screens ON on all my videos. As you said when it's Off and the heat is too much it's simply going to burn and you will see it once you turn the phone on. Also having the phone ON can help prevent damage to the screen (physical damage other than heat damage). My methods are thoughts and from experience with logical reasoning behind them. If nobody asks I don't tell. You asked this is the explanation.
On iphones there is no way to see it without a screen or access to the phone from a computer which need a screen to give permission from the phone to connect to the computer.
Do you think even if I put a double-sided tape it will be ip68 again? It is not. Unless I miraculously find a double sided tape from Apple directly these aftermarket tape cannot restore ip68 rating. Also the video came out less than 4 days after the device was released that's why you saw what you saw 😂
These videos are half the story. You forget to mention that the adhesive is on with the power of a thousand elephants. I get these phones red hot and still only 7/10 we can remove the display due to the amount of adhesive that apple uses some times. This is the case specifically for iPhone 13 and 14 series. Apple are trash and have the worst screen design in the entire smartphone market.
Ok check this one out then (I used original parts from Apple Self Service Repair) Apple iPhone 15 Pro Max Battery Replacement Repair ua-cam.com/video/oI1IcmaGULQ/v-deo.html
My friend....I hope you did listened to what I said. I did this video not even 3 days after the phone was released and didn't have double sided tape made specifically for the phone.... True B7000 is not what should be used for batteries.
What an amateur repair ! Liquid adhesive for the battery ? No new display adhesive stripes ? Bro stop doing videos like this, that is the reason Apple is trying to destroy diy repair !
I don't understand people like you. You seem to not listen and just watch. I did this not even 1 week after release of the phone (everything you are saying is useless because 1 week after release nobody is selling parts for this phone). Also everything I did is not bad. The way the screen was taken out the tape was in the best condition possible (again there's no tape to buy and replace 🙄). If you don't understand..just ASK WHY DID YOU DO THIS OR THAT? Do not assume things that you only believe is true because it's not true and your analysis is simply erroneous. Apple does what they do to make more money if you don't conclude that I cannot help you. The phone in the video is here still working absolutely no problem with it. Please ASK instead of assuming because you don't know everything and you cannot know everything 🤷🏽♂️.
I recorded this video the day the phone was released to the public. Then there's nothing available on the market to replace anything inside this phone. Also I explained why I did it or didn't I??
The way this guy is handling this phone, these plastics he is putting them too deep, and those gloves. what is this ebola? I wouldn't touch my phone for sure
Yea it wash maybe little to harsh, I appologise. but watch ifixit videos how to open it. you should stick the plastic only 3mm in to dont demage the phone. but that is just one thing here..
@MonsterSmart brother do you know the difference between a Million dollar company and a dude doing youtube video? We cannot be the same thing. They have teams and resources. I am alone and buy everything myself. Also how I did it in the video was the right way to do it. Ifixit has broken some devices while doing the teardown which in the contrary the same device I did the teardown I did not damage it. It's a very irrelevant conversation. They are not perfect am not perfect. They make everything a certain way because they are a company and have resources ( they don't show everything as they want you to think it's easy). I show everything and until you try you won't understand why and what I did in the video.
Be one of the only few who support and find value in my videos.
Please spare some change to help the channel keep moving forward.
www.buymeacoffee.com/ersbit
I am watching this from my I phone 14 pro max 😂😂😂😂
🤣🤣 take care of your battery I guess
Same here😂
I have the normal pro 😂
14 proooo😂
Watching this with 15PM 🙂
Worked perfectly for me, appreciate you.
You are welcome! 👍🏽
Hi, where did you purchase original apple battery? 😢
I’m only finding replacements/non originals 😢
There are pull tabs on the battery so you don't have to pry it out. Kind of like a command strip.
Agreed! Soak them in isopropyl alcohol first and they will go super stretchy, such you can stretch and peel them out without bending the battery!
This was really helpful! Can I ask where you got those gloves? They do they provide anti static or was it just to protect your hands from the heat gun?
After all this does the iphone will show display changed in settings??? Plz reply
If you change it the way I did you will only have the notification for none genuine battery installed.
Un the video below I showed what to do to avoid having the notification of none genuine parts (battery). This process is more involve and will require more more and tools. How to Replace iPhone 15 Pro Battery and iPhone 15 Pro Max
ua-cam.com/video/yWoaSS7NkWU/v-deo.html
sir, do you need to remove battery in ip14 pro max before motherboard swap?
Yes I highly recommend that because you will most likely break the 5G antenna 📡 cable
Your instructions were excellent. I messed up when taking out the OLD BATTERY and that half circle covering came off and I ripped through that band of wire. I cut right through my flex cable wire. It goes underneath your phone and mine had a protective covering over it. I cannot screenshot anything or turn my phone off now.
What parts does one need to fix that? On 5 min 44 sec of video shows a great pic of the inside of the 1/2 circle of tape covering that band. I put my new battery in pulled off the tape. The NEW BATTERY has to come off again.
Yeah so two things I cannot do is :
1) turn off my phone
2) take screenshots.
I’m assuming my battery was defective and would get hot often . So the backside of my battery looks like it has tape melted on it. On the bottom back side.
So it looks like I have to completely disassembled the entire phone in order for this to be fixed. Can they weld that brown band that goes across width wise east to west or west to east for the flex cable that I cut off?
Hi very sorry to hear something like this happened. Seems like the button and wireless coil circuit is damaged. They are one piece. If that is the only cable damaged you can replace it by removing the motherboard and a bunch of screws to access it. It's one of the last things buried inside the phone. After replacing it everything should come back.
It's possible to weld but you'll have trouble finding someone who can do it properly. It's not worth it...the guy would have to disassemble the phone either way and remove the broken parts to solder them. On the inside the heat might damage something else if he solder it inside the phone.
The best way is to do the full teardown and replace the part. I have a video for the teardown of this iPhone 14 Pro. Be very careful and organized if you try it. Don't pull any cable with force....pull slightly and look etc.... The cable for the 5G antenna is also very badly positioned which makes it easy to damage. It is a cable right above the battery going from the back of the motherboard to the other side of the phone below the power button.
@@ersbit yeah so when I pulled the old battery the Volume , Power on & Off Flex cable ripped right through. I saw that for sale on iFixIt’s site for $30 US Dollars. From the additional heat from this defective battery I wonder if that made it inevitable that this procedure ripped my flex cable clean through? It looked like duct tape on the underside of the old battery. Then not realizing THAT I foolishly put the NEW BATTERY over the ripped flex cable . I put the new aftermarket battery back in not realizing I damaged the flex cable severely. Then I charged up my new battery.
I’ll watch your video too but didn’t think I need to dismantle everything and like you said it can be spot welded. If you do not buy the original battery you cut the anode and cathode off the old battery to spot weld that back on. I saw that on his channel being 4 min 15 sec long using the SPOT WELDER. So that Seesii Brand Spot Welder looks really slick. I need to practice welding some samples first.
Now another mess is I best wait until my battery is completely dead because that flex cable is a open circuit and in order to take out the NEW BATTERY with that new adhesive normally you use isopropyl alcohol. Well that is all good and dandy to use when battery is completely dead as that is THE ONLY way to SAFELY REPAIR this. So if I use isopropyl alcohol to allow ease of removal I need to be 100% certain battery is COMPLETELY DEAD before using any isopropyl alcohol. The current will short something else catastrophically and do not need that.
So if I can salvage taking out my NEW AFTERMARKET BATTERY have to cut the CATHODE & ANODE to that old battery and also spot weld that too because I have that APPLE doesn’t recognize something with this aftermarket battery. So I already cut the cathode & anode to the old battery.
He said alcohol like 20 times in one minute 🤣🤣
🤣🤣
good morning, what device did you use for filming thanks
This was with my sony Zve10 with a sigma 16mm 1.4
without turning off the iphone ? thats awesome.
Conclusion, it doesn't do any bad to the phone. When you are ready to try a repair, I recommend that you turn the phone off before proceeding. Best practice is to have the device off before you do anything repairwise
ok thank you for reminder bro. much appreciate. @@ersbit
If you damage the screen....you have to buy another screen!
Damn!.....this guy is smart af!😅
😄 it was maybe the day I pickup the phone. It's always challenging to do this right after release of the phone. Hope you found the video interesting👍🏽
My Iphone 14 Pro Max just randomly turns off and then turns on again, is there something with the battery or is it something else?
You'll have to troubleshoot the device. Did it happen after a recent IOS update?
What is the model of the white phone on the desk besides the iPhone at 7:30 ?
That's a Galaxy S22 Ultra Phantom White
can you find the IMEI of the iphone 14 pro max assembled?
Yes, in setting and about? or is the screen completely dead, black and unresponsive ?
there is no display, it is broken... is the IMEI number disassembled inside the back?
?
My original battery sucks makes my phone hot all the time anyone recommend a good replacement battery brand I can go with
Sorry I don't know these battery sellers. Go with the one that has lot of reviews and good rating.
Did you fix battery drain by changing battery?
Im 88% on my 14 pro, me getting ready boys, probably in about a year I'm going in.
@@thehardnesschannel1605 have you gone in yet? 😂
will it show battery health? how to buy original iPhone battery?
Even if you put original battery it will show the notification "unknown part" 😅
iPhone 12 mini and iPhone 12 Screen Replacement Repair Guide
ua-cam.com/video/aGGkhx98k64/v-deo.html
Here's I did the screen then battery from another iPhone 12 mini still got the unknown part notification
The easiest way to avoid having that notification is to have the battery replaced by Apple they will reprogram the battery for you and no unknown part will appear.
The other solution is to cut the leads of the battery and resolder them on a new battery the leads and connector will be the same as the old battery then you won't have the notification "unknown part"
@@ersbit ohhh!! Okay!! Thanks for the reply
@@ersbit That's not true. The reason for unknown part is because Apple's lab take the SN of the part and make sure it is part of the SN of the device.
Is it going to be 100% health again?
No the health star will be disabled unless you remove the small board on top of the battery and solder it on the new battery (more work). If you simply swap the battery it will work fine but you'll no longer have acces to the health stats.
Id rather use my lcd screen heat pad, saver than using a blow torch that has excessive heat 🥵, I do get the overting showing up on the iphone you are repair, this could damage the cameras as thy are sensitive.
I never had any camera damaged. What you are saying is very much impossible if you know what you are doing or following the instructions correctly.
iPhone 13 Mini Back Glass Replacement Repair
ua-cam.com/video/jRXG-sXc9yU/v-deo.html
Here I thought the camera would get damaged after all the heat but it is fine no problem.
Am not encouraging you to try if you don't feel confortable doing it. Use whatever means will best suit you and your situation 😄.
Can 13 pro max battery fit in 14 pro max?
I am not sure this is possible. They tend to change the connector of the batteries to make sure it's not backward compatible.
The iPhone se 2020 battery does not connect to the iPhone 8 battery which has the same size and fit perfectly inside the iPhone se.
The 13 pro max and 14 Pro Max might be the same but I am not certain ( these batteries have the same size and shape but the connector might be different)
If you search online and you find a battery that has title 13 pro max and 14 pro max so they are interchangeable but I highly doubt.
Sir please I want a battery of 14 pro max it it's damaged by over charged ...😔🥺
Help me 🙏😔
Check amazon or eBay
where was A16 biotic chip gone at the end of the video from the iphone....??? wondering!!!
It's on the motherboard check my teardown video of the iPhone 14 Pro
Someone needs to show this man the power of isopropyl alcohol (regarding releasing the battery sticker.)
No I know....check my Pixel 8 Pro back glass replacement. There alcohol 99% is required. Here it is not required and I'd prefer doing it with heat than alcohol.
True alcohol should help and have the same effect as using heat like I did 😁.
Check the Pixel 8 Pro video to witness the absurdity they did with the back glass 🤣
@@ersbit fair enough, I’m no expert. I’m getting pissed off that there isn’t laws mandating user replaceable batteries on ALL electronic devices. Europe was worried about usb c, meanwhile 90% of shit is extremely difficult to repair if at all (ie like phones, most in ear headphones are all glued together).
There is no reason this couldn’t be designed to be more easily replaced at the expense of a few grams weight.
@@ibsn87 i think it much more about dust proofing, water proofing, everything proofing more than it is saving weight
@@supernielsen1223 so, just keep producing disposable electronics… it’s absolutely possible to produce 95% of consumer electronics, maintain IP dust and water ratings with user replaceable batteries. Phones, laptops, headphones, torches, scooters etc included.
It simply won’t change unless laws are changed to mandate it. A few machine screws around your phones back cover might ruin the clean aesthetic - meanwhile 99% of people I know cover their $1800 phone with a $20 case. Humans are idiots. Simple solution to extended the life of every device, and making it user serviceable. A back glass on an iPhone pro max is like $800 to replace.
Funny how the GoPro is a hardcore action cam, designed to take a beating. Which has a waterproof door, with replaceable batteries….
Aren’t you supposed to reprogram battery?
Yes. But if you don't you'll get only the notification to scare you but the device should function normally. Buying a programmer is costly and is maybe x5 price of the battery.
First of all before you open that device, you should’ve just turned it off
Yes. Best practice wants you to turn the phone off. I agree with you.
I have the phone ON because I am monitoring the heat level / screen réaction to heat as I heat the screen.
There's a a few seconds before the screen burns and get damaged. If you caught the screen during the beginning of this process you stop the heat source you will prevent the screen from burn damage. This is the reason why I have the screens ON on all my videos.
As you said when it's Off and the heat is too much it's simply going to burn and you will see it once you turn the phone on.
Also having the phone ON can help prevent damage to the screen (physical damage other than heat damage).
My methods are thoughts and from experience with logical reasoning behind them. If nobody asks I don't tell. You asked this is the explanation.
IMEI?
On iphones there is no way to see it without a screen or access to the phone from a computer which need a screen to give permission from the phone to connect to the computer.
Thank you so much❤
Is the process the same for the 13 pro??
Noooo its different from 13 Pro to 14 Pro
@@ersbit do you recommend a video for 13? 😢
The iPhone 14 and iPhone 13 have the same processor. I misread your question.
The process should be the same for the iPhone 13 Pro!!
I did here à screen replacement tutorial but didn't remove the battery
ua-cam.com/video/WWpObfbjcE8/v-deo.html
Ip68 bye bye i don’t see Tat UA-cam put sealant no the screen
Do you think even if I put a double-sided tape it will be ip68 again? It is not. Unless I miraculously find a double sided tape from Apple directly these aftermarket tape cannot restore ip68 rating. Also the video came out less than 4 days after the device was released that's why you saw what you saw 😂
These videos are half the story. You forget to mention that the adhesive is on with the power of a thousand elephants. I get these phones red hot and still only 7/10 we can remove the display due to the amount of adhesive that apple uses some times. This is the case specifically for iPhone 13 and 14 series. Apple are trash and have the worst screen design in the entire smartphone market.
Dont use a heatgun use iso 99,9%
Where can I get a replacement battery is the question. Lol.
Hi I have put the links in the description. True I found only one seller on Amazon hahaha
@@ersbit, thank you so much. Appreciate it.
not good for replace battery
Ok check this one out then (I used original parts from Apple Self Service Repair)
Apple iPhone 15 Pro Max Battery Replacement Repair
ua-cam.com/video/oI1IcmaGULQ/v-deo.html
Kok di kasih lem,,harus nya Doble tip lah
O cara colocou b700 na bateria, isso é inadmissível!
My friend....I hope you did listened to what I said. I did this video not even 3 days after the phone was released and didn't have double sided tape made specifically for the phone....
True B7000 is not what should be used for batteries.
iPhone 15 Pro and iPhone 15 Pro Max Battery Replacement
ua-cam.com/video/yWoaSS7NkWU/v-deo.html
PUTTING BATTERY IN IPHONE 14 WITH A GLUE 💀
You must not have listened to the video audio. My explanation is in the video
😒
What an amateur repair ! Liquid adhesive for the battery ? No new display adhesive stripes ? Bro stop doing videos like this, that is the reason Apple is trying to destroy diy repair !
I don't understand people like you. You seem to not listen and just watch. I did this not even 1 week after release of the phone (everything you are saying is useless because 1 week after release nobody is selling parts for this phone). Also everything I did is not bad. The way the screen was taken out the tape was in the best condition possible (again there's no tape to buy and replace 🙄). If you don't understand..just ASK WHY DID YOU DO THIS OR THAT?
Do not assume things that you only believe is true because it's not true and your analysis is simply erroneous.
Apple does what they do to make more money if you don't conclude that I cannot help you. The phone in the video is here still working absolutely no problem with it.
Please ASK instead of assuming because you don't know everything and you cannot know everything 🤷🏽♂️.
Using glue to fix the new battery???
I recorded this video the day the phone was released to the public. Then there's nothing available on the market to replace anything inside this phone. Also I explained why I did it or didn't I??
From where we can find original battery?
Unfortunately Apple only certified it's battery as original...resellers may say their is original but there's no way to confirm it🤷🏽♂️
Self Service Repair site is offering original parts
where to buy the original battery ?
Apple only unfortunately resellers may have batteries saying they are original but there's no way to confirm that statement 🤷🏽♂️
який жах.
видирає акум впираючись лопаткою в блок камер, заміть 2х стороннього скотчу використовує клей.
забаньте автора!
a
The way this guy is handling this phone, these plastics he is putting them too deep, and those gloves. what is this ebola?
I wouldn't touch my phone for sure
I do not really know what to respond to your comment...😭 am just crying 😭 such harsh words.....Thank you 🤣 I hope you have a good day nevertheless.
Yea it wash maybe little to harsh, I appologise. but watch ifixit videos how to open it. you should stick the plastic only 3mm in to dont demage the phone. but that is just one thing here..
@MonsterSmart brother do you know the difference between a Million dollar company and a dude doing youtube video? We cannot be the same thing. They have teams and resources. I am alone and buy everything myself. Also how I did it in the video was the right way to do it. Ifixit has broken some devices while doing the teardown which in the contrary the same device I did the teardown I did not damage it. It's a very irrelevant conversation. They are not perfect am not perfect. They make everything a certain way because they are a company and have resources ( they don't show everything as they want you to think it's easy). I show everything and until you try you won't understand why and what I did in the video.
🤣🤣 3 mm do you know how long 3mm. They open the device like I show it. Then put the plastic in show it slide easy for the video that's all.
Extremely unprofessional no offence..
Ok. Please explain why you saying it is unprofessional! Don't just throw random statement and leave😒.
one dead pixel already hahahaha
How 😨 in my video you spotted a deadpixel?? What time was it on
@@ersbit 7:22-7:24
@@robs9439 You mean the black dot upper right ?
I still have the phone it doesn't have any dead pixel. This was a dust or something else