Atomstack Maker A30 Pro laser cutter and engraver - review of a powerfull 33W diode laser
Вставка
- Опубліковано 2 сер 2024
- Atomstack Maker A30 Pro laser cutter and engraver is a 33W diode laser which arrives with air assist kit. In this video you can see it tested with different materials like plywood, MDF wood, acrylic, stainless steel and anodyzed aluminum.
Product page: www.atomstack.com/products/at...
A30 Pro Coupon Code: A30PRO100
Valid period: 2023.06.13-2023.09.30
Atomstack camera review: • Atomstack Maker AC1 ca...
F3 Matrix cutting panel review: • Atomstack F3 Matrix cu...
A20 toothpick positioning method: • My first experience wi...
Chewbarka anodyzed tags: • Laser engraving anodiz...
Contents:
0:00 Introduction
0:59 Safety
1:40 Unboxing
3:11 Assembling
6:58 First impressions
7:57 The noise
8:43 Focus
8:55 Engraving plywood
9:16 Vibration test
9:46 Grayscale image (wood)
10:40 Cutting 3mm plywood
11:08 Effect of air assist
11:26 Cutting 10mm plywood
12:55 cutting 3mm MDF wood
13:24 Black acrylic 3mm cutting
13:54 Stainless steel engraving
14:34 Anodyzed aluminum
15:05 Offline engraving
16:09 Conclusions
#atomstack #laserengraving #laserengraver - Наука та технологія
I sounds quieter then last last one you reviewed Igor
Yes, that one had 70 dB on high frequency, wery hard to work next to it without ear protection.
The 200mm/min at what power for the stainless steal?
100% power, using black marker on surface you can go even higher speed
Nice presentation! Could it cut transparent acrylic ?
Not transparent, laser just go through it without heat
Who is the beautiful woman you use in your engraving tests?
Padme (Start Wars)
Basically, not worth the money, A20 is the same and give you almost the same possibilities
Probably I will have some comparison A20 vs A30. What materials you would like to see tested?
@@MyTechFun Honestly, none ;) In my opinion 20W it more than enough for any hobby application
@@alexey_sychev I agree.
Past 20w there is no point with the kind of projects people will make on these desktop diode lasers. It's just a money grab now.
Anything thicker than 20mm I'm going to my table saw which will be ten times faster.
I would also rather have a 20-watt with a sturdier frame, than a 30 watt with a flimsy frame like this.
Meh...
10w more than the Falcon 2. Weak looking frame. Not as many safety features. Huge air pump. Not a big company.
Falcon 2 is the better buy.
As you mentioned. Additionally: advantage of A30 is the screen for offline engraving, disadvantage is the mechanics mentioned in the video.