Well now I know how to take apart my muse to see about fixing the double click of the left mouse button. Makes it kinda hard to play my games when I can't use auto or fusion rifles becasue it will not stay pressed.
would you happen to know any reason why my g903 would not be getting power? i have replaced the battery and it still doesn't turn on. any help would be greatly appreciated
hi. accu original? Is the polarity correct? - check with a multimeter. If the PMW/HERO sensor is defective - the mouse is only recognized briefly (1 second)...
@@televova thanks for the quick reply. the new battery is a 1000mAh. i belive its from the same manufacture as the oem logitech. i will check with a multimeter asap. the mouse is not recognized at all (i get no lights and it does not show on my computer) so the hero sensor could maybe a reason for no power?
@@UsernameJim not quite so: there will be voltage, but with a faulty sensor the mouse will turn on for 1 sec. With a faulty (incorrectly connected) battery - it will not turn on at all...
@@televova ok i believe i understand. Could it be the new battery i have purchased is not charged? it says on the battery "new battery pack must be charged fully before use" but I'm not entirely sure how i could charge it, i believe i need a certain type of charger for the battery?
For thouse who can't remove the battery: you can *very gently* carve out piece of plastic just above the green PCB with something like box cutter, and then *carefully* shove the same box cutter underneath. Be careful not to slice the battery!
Hello, I came accross your video. Thanks for the video. I do have a question. Post a link please for the button(for the flat one you have changed). Thank you!
Hey thanks for the Video but my problem is. The click funktion doesnt work because it fell down from my table but it works on my Desktop. So my question ist do i also need to soldering something or just change the plastik with the wheel ?
A bit off-topic question: Do you have any experience on how to remove the plastic part of the scroll wheel from the metal part, is it glued in or is it just pressed in?
Hello, I realize this is an old video so I'm not expecting a response, but if you see this and have any insight I'd appreciate it! I dropped my G900 (which seems to be nearly identical in construction and now the middle click doesn't "click". I mean, the switch still depresses and the input is recognized, but theres no physical "click" or perhaps, "thud" feedback on the click. I've completely disassembled mine and all the springs are still there and undamaged, there's no evidence of anything broken off any of the plastic parts, but I can't even find what would have made that click in the first place on anything available online. I also don't see any differences in the wheel assembly to what you have in the video, or what I've seen in other images/guides relating to repair/disassembly. Any ideas? Either way, thanks for the video!
Hi. Maybe some plastic on the button itself broke off? And i have another video where you can see how mousewheel can be repaired/made quieter: ua-cam.com/video/3IIBczfZvsc/v-deo.html
Hey, HybriD. You seem pretty knowledgeable with Logitech gaming mice. Might you have any idea why my G903 stopped working after I disconnected the charging cable? It was working fine up until I disconnected. I hadn't yet set up the wireless, but figured I would troubleshoot the wireless set up after. I was in gHub when I disconnected the mouse and it just went dark. gHub suggested I "wake up" the device, but nothing I did worked. Might I have of shorted the battery or something? Is there anyway to reset the device to factory settings?
New! Logitech G Pro X Superlight -30 screws- disassemble: ua-cam.com/video/JpOFutBrRwc/v-deo.html Logitech G PRO disassemble in detail | 37x screws: ua-cam.com/video/mp_3aCj2e_I/v-deo.html Logitech POWERPLAY charging disassembly: ua-cam.com/video/eejjGiVaRFc/v-deo.html
Hi, I did not find the original switch. but can be redone from the G700-mouse. (!) A video has been recorded with 2 (3) switch replacement options. Now I have to assemble everything. It will be ready by 12.02... I ask you to watch a video with subtitles about a hybrid 2in1 (g903+master3) mouse for now: ua-cam.com/video/wmCfMy78c_M/v-deo.html
(!) A video (G903, Part2) has been recorded with 3 switch replacement options. With information where to order. Now I have to assemble everything. It will be ready ...12.02. tr I ask you to watch a video with subtitles about a < M X M A 3 T E R > 2IN1 Hybrid (G903+Master3) Part1, 2 mouse for now: ua-cam.com/video/wmCfMy78c_M/v-deo.html
@@th24gg19 Hi, I did part#3 a week ago. Here: ua-cam.com/video/ltihwG-hoNo/v-deo.html (min 6:37) you can see how microswitch can be expanded. If you want - I can do part#4 with microswitch replace... tr
Whole it's a nice video, it only does the bottom part. I was looking for the top part, where the mouse left and right click are in this mouse. Plus where the battery is, and the dpi changing is. Sucks that he doesn't do the top part. Oh well, of to find another teardown just for that part
@@televova awesome, I actually appreciate that. I do appreciate this video too, just in case you thought I didn't (as evidenced by the ellpses). It just so happened to not include what I wanted, but that is okay
@@alericjohansen6775 While I'm doing the second part, watch the video where I made Logitech G903 and Master 3 Hydrid-2in1-Mouse, part2 with Subtitles: ua-cam.com/video/wmCfMy78c_M/v-deo.html
That is very, very bad design that you cannot open the mouse without heating the sticker pads. All mouses should be easy to open and clean. Shame on Logitech for this horrible engineering.
@@televova that´s sad. It would be so easy to make them easy to maintenance and repair. I´ll be sure to keep this in mind when I purchase my next mouse
The double clicking just happened to me after a little over a year of owning the G903. As you read this, I am soldering in new Omron D2F-01F microswitches. Got them here www.amazon.com/gp/product/B0062WNDLI/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
It will, pretty much any wireless (logitech) mouse is bound to have the issue. The microswitches don't get enough whetting current (Omron recommendation is 5v/1ma) and over time the voltage (3.7 or worse 1.5) is not enough to ensure stable contact. Morealso Logitech uses the China version of the switches...
Thank you sir, now I don't have to go searching all over and not finding those middle screws. This saved me a lot of time.
Well now I know how to take apart my muse to see about fixing the double click of the left mouse button. Makes it kinda hard to play my games when I can't use auto or fusion rifles becasue it will not stay pressed.
very helpful had to clean out my scroll wheel was getting too much resistance thanks dint find the 2 screws under the logo sticker
would you happen to know any reason why my g903 would not be getting power? i have replaced the battery and it still doesn't turn on. any help would be greatly appreciated
hi. accu original? Is the polarity correct? - check with a multimeter.
If the PMW/HERO sensor is defective - the mouse is only recognized briefly (1 second)...
@@televova thanks for the quick reply. the new battery is a 1000mAh. i belive its from the same manufacture as the oem logitech. i will check with a multimeter asap. the mouse is not recognized at all (i get no lights and it does not show on my computer) so the hero sensor could maybe a reason for no power?
@@UsernameJim not quite so: there will be voltage, but with a faulty sensor the mouse will turn on for 1 sec. With a faulty (incorrectly connected) battery - it will not turn on at all...
@@televova ok i believe i understand. Could it be the new battery i have purchased is not charged? it says on the battery "new battery pack must be charged fully before use" but I'm not entirely sure how i could charge it, i believe i need a certain type of charger for the battery?
the battery should start charging from USB.
the black wire (minus) should be on the left of the socket
Would I be able to put it back after?
What kinda screwdriver would i need to take the screws out the ones i have are too big
wiha 261 / ph00X60
@@televova thanks a lot
@@rider338 ... and 6 edge screwdriver for screw front: wiha picofish 267 p
For thouse who can't remove the battery: you can *very gently* carve out piece of plastic just above the green PCB with something like box cutter, and then *carefully* shove the same box cutter underneath.
Be careful not to slice the battery!
Hello,
I came accross your video. Thanks for the video. I do have a question. Post a link please for the button(for the flat one you have changed). Thank you!
Hi s. part2, min26,18: ua-cam.com/video/w6EZNuCiukM/v-deo.htmlsi=6uJNOrV1Yz-jSFwb&t=1575
Hey thanks for the Video but my problem is. The click funktion doesnt work because it fell down from my table but it works on my Desktop. So my question ist do i also need to soldering something or just change the plastik with the wheel ?
Hi. In Logitech software (G HUB) assign L/R/Middleclick function for other button and check whether microswitch change is necessary...
This helped me a lot, thank you 💪🏻
A bit off-topic question: Do you have any experience on how to remove the plastic part of the scroll wheel from the metal part, is it glued in or is it just pressed in?
Plastic is pressed, but if you no longer need the metal upper part, simply saw the metal and free the plastic wheel underneath...
@@televova thank you, yeah I was trying to remove it whit out damaging the metal ring, but brut force it is.
Bonjour, moi c'est le clic droit qui s'enfonce pas bien, est-ce que quelqu'un sait si il se répare ?
Hi, microswitch d2fc-f-7n
hey thanks for this video! but wher can i buy the switch ?
hi, aliexpress, s. part2: ua-cam.com/video/w6EZNuCiukM/v-deo.html
which are the difference between g903 battery and g903 hero battery?
no, they are the same, g903=903hero...
the g502 lightspeed hero has a smaller battery. I'm doing next week g502 lightspeed video
So, why Logitech said they had different battery life? 32hrs vs 140hrs (Hero)
hero-laser uses less energy... is here Logitech G903 Lightspeed【H E R O 16K 】 disassemble: ua-cam.com/video/cbRinwPMPN8/v-deo.html
Hello, I realize this is an old video so I'm not expecting a response, but if you see this and have any insight I'd appreciate it!
I dropped my G900 (which seems to be nearly identical in construction and now the middle click doesn't "click". I mean, the switch still depresses and the input is recognized, but theres no physical "click" or perhaps, "thud" feedback on the click. I've completely disassembled mine and all the springs are still there and undamaged, there's no evidence of anything broken off any of the plastic parts, but I can't even find what would have made that click in the first place on anything available online. I also don't see any differences in the wheel assembly to what you have in the video, or what I've seen in other images/guides relating to repair/disassembly. Any ideas?
Either way, thanks for the video!
Hi. Maybe some plastic on the button itself broke off? And i have another video where you can see how mousewheel can be repaired/made quieter:
ua-cam.com/video/3IIBczfZvsc/v-deo.html
Hey, HybriD. You seem pretty knowledgeable with Logitech gaming mice. Might you have any idea why my G903 stopped working after I disconnected the charging cable? It was working fine up until I disconnected. I hadn't yet set up the wireless, but figured I would troubleshoot the wireless set up after. I was in gHub when I disconnected the mouse and it just went dark. gHub suggested I "wake up" the device, but nothing I did worked. Might I have of shorted the battery or something? Is there anyway to reset the device to factory settings?
Hi. Do LEDs work with a mouse without cables?
the battery is most likely defective.
(!) Gestures & Macro sat the same time: 2in1.Hybridmouse Vlll -04.2023 lll -3n1.Hybridmouse lX ~ 06.2023 ~
(New!) Rubber wheel for Mx Master 3 and soft middle D2LS21 click l Logitech Mouse Mod: ua-cam.com/video/GrxKNwY4jOw/v-deo.html
Hi, what was your issue with the mmb. I am facing an issue with it clicking it self and it remains pressed for some reason
Hi. The mouse must be open. The microswitch will probably have to be replaced. tr.
New! Logitech G Pro X Superlight -30 screws- disassemble: ua-cam.com/video/JpOFutBrRwc/v-deo.html
Logitech G PRO disassemble in detail | 37x screws: ua-cam.com/video/mp_3aCj2e_I/v-deo.html
Logitech POWERPLAY charging disassembly: ua-cam.com/video/eejjGiVaRFc/v-deo.html
How to fix death led? My g903 led dpi death..
Hi, 3-LED Cables can be bought on Aliexpress...
Leadr & Tyon with Mx Master 3 in 2in1.Hybrid Vlll lX: ua-cam.com/video/jw9rztmTX3o/v-deo.html
New! Trust Ergonomic Voxx vertical DISPLAY mouse disassemble: ua-cam.com/video/jw9rztmTX3o/v-deo.html
hey! the g903 has any reset button ?
hi, no.
you can try turning off the battery for up to 30 minutes
What is the name of the part you changed?
s. here part2: ua-cam.com/video/w6EZNuCiukM/v-deo.html
Hi, which iron and wire are you using?
Hi, 63/37 pb/sn solder core wire 0,5mm
- aliexpress, ebay
Now that i had double click for around year on my g903, scrolling stopped working, amazing mouse.
Hi, s. video Master MX Scrolling fix: ua-cam.com/video/wiVgDjfDuvc/v-deo.html
Same problem. Did you ever fix yours?
Hey, where I can get a replacement middle click switch? Is there a lighter version too? (like g403middle click). Thanks for the video!
Hi, I did not find the original switch. but can be redone from the G700-mouse.
(!) A video has been recorded with 2 (3) switch replacement options. Now I have to assemble everything. It will be ready by 12.02...
I ask you to watch a video with subtitles about a hybrid 2in1 (g903+master3) mouse for now: ua-cam.com/video/wmCfMy78c_M/v-deo.html
NEW! - Logitech G Pro X Superlight 500/750mAh - 180hours of battery life: ua-cam.com/video/O0xsVBkmlig/v-deo.html
new! Logitech MX Master 3S vs 3 l PMW3816DM Sensor: ua-cam.com/video/3tvK531pxHU/v-deo.html
NEW! Logitech MX Master 3S ( Mx3 vs MX3S) Problems: clicks, DUOlink FN; ua-cam.com/video/6t54w6Q2gqs/v-deo.html
Bro what's the music ?
*Music: s. Subtitles...
I am a man who will fight for your honor
@@televova thank you
silent Scrolling MOD for Logitech Mousewheel Master vs G502, G903, G604, G700, M720, M705, M500 | Mice vs Compare: ua-cam.com/video/3IIBczfZvsc/v-deo.html
250$ mouse: 18 Buttons 2in1.Hybrid#4: ua-cam.com/video/JOMcMYWBhZk/v-deo.html
(!) A video (G903, Part2) has been recorded with 3 switch replacement options. With information where to order. Now I have to assemble everything. It will be ready ...12.02. tr
I ask you to watch a video with subtitles about a < M X M A 3 T E R > 2IN1 Hybrid (G903+Master3) Part1, 2 mouse for now: ua-cam.com/video/wmCfMy78c_M/v-deo.html
Is it possible to replace the left and right click if soMEone broke it by pulling the left and right click too far?
@@th24gg19 Hi, I did part#3 a week ago. Here: ua-cam.com/video/ltihwG-hoNo/v-deo.html (min 6:37) you can see how microswitch can be expanded. If you want - I can do part#4 with microswitch replace... tr
New(!) Rubber wheel for Mx Master 3/3S: ua-cam.com/video/PajtnJjgzcU/v-deo.html
Whole it's a nice video, it only does the bottom part. I was looking for the top part, where the mouse left and right click are in this mouse. Plus where the battery is, and the dpi changing is.
Sucks that he doesn't do the top part. Oh well, of to find another teardown just for that part
ok, I'm doing part2 today...
@@televova awesome, I actually appreciate that.
I do appreciate this video too, just in case you thought I didn't (as evidenced by the ellpses). It just so happened to not include what I wanted, but that is okay
@@alericjohansen6775 While I'm doing the second part, watch the video where I made Logitech G903 and Master 3 Hydrid-2in1-Mouse, part2 with Subtitles:
ua-cam.com/video/wmCfMy78c_M/v-deo.html
Hi, Logitech G903 disassemble, part3: ua-cam.com/video/ltihwG-hoNo/v-deo.html
The Price of this mouse to high for this Quality
Is there anyone else whose right click is broken in a way that aiming in games is impossible because the sensor counts one click as like 10 ??
or replace d2f7n-microswitch or pour alcohol into it...
Yes
That is very, very bad design that you cannot open the mouse without heating the sticker pads. All mouses should be easy to open and clean. Shame on Logitech for this horrible engineering.
G604 and G502 wireless are even harder to open
@@televova that´s sad. It would be so easy to make them easy to maintenance and repair. I´ll be sure to keep this in mind when I purchase my next mouse
I hope this comment helps the algorythm to recomend your video in top when searching.
Thank you. then leave a comment under 2in1.hybridmouse (G903 & Master 3)... might help too )
If my G903 starts doing double clicking or some weird sh*t I'm going for a RMA Replacement and then I'll do this to my faulty mouse 👌
The double clicking just happened to me after a little over a year of owning the G903. As you read this, I am soldering in new Omron D2F-01F microswitches. Got them here www.amazon.com/gp/product/B0062WNDLI/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
It will, pretty much any wireless (logitech) mouse is bound to have the issue. The microswitches don't get enough whetting current (Omron recommendation is 5v/1ma) and over time the voltage (3.7 or worse 1.5) is not enough to ensure stable contact. Morealso Logitech uses the China version of the switches...
new! Logitech MX Anywhere 3 / Electromagnetic scrollingua-cam.com/video/9MxEbgKoIwg/v-deo.html
Hey i have a problem can i contact you pn instagram?
Hi. What a problem? i answer here...
@@televova i broke my click button how i can repair ?:)) please help fast
@@haikyuu9376 Which button? LR click or mouse wheel mode?
Switch not working or button was broken off?
@@televova is torn the right click
@@televova can i stick it?