Hello, I have been using this system for 3 years, and I can say that I am satisfied. With small adjustments made by me, I managed to make it more to my liking :) Look here and the solution to the subwoofer volume that cannot be set to 0! ua-cam.com/video/DCDA5lMWLG4/v-deo.html This modification is really worth doing!
My X530 turns on but there's no sound coming from it. However, sound comes out from headphones when I connect to the 3.5mm jack. Could this be the solution?
The problem may be from the amplifier! Either it doesn't receive a signal anymore, or it doesn't output it anymore! You have to open the subwoofer and check if there is something damaged or smoked and check if it receives a signal on the board and further if that signal reaches the amplifier and if it comes out to the speakers! The headphones work because the signal from the headphones is taken from the unamplified input! The signal that comes out of the PC and enters the right speaker is connected via a potentiometer and directly to the headphone jack! It has nothing to do with the amplifier board or any part of the filters!
Tengo ese modelo y lo tengo conectado con un adaptador de RCA a Plug 3.5 mm (3 salidas) y no suena lo suficiente, el subwoofer distorsiona, la calidad de sonido no es muy buena, ¿ Es normal? ¿Como puedo mejorar el sonido? Ya revise la tarjeta y verifique capacitores y esta todo normal, todas las cornetas suenan pero el sonido es deficiente
Hola, realmente no se puede sacar mucho sonido de este sistema. Es de baja potencia y el subwoofer no tiene ese potenciómetro regulable para poder frenar los graves definitivamente. Si lo configura al mínimo, el subwoofer sigue siendo bastante ruidoso. Tengo otro video donde mostré cómo puedes conectar 3 enchufes Jack para hacer solo uno. De esa forma tendrás todas las entradas directamente para que no necesites más ese adaptador. Ese adaptador también puede estar defectuoso y por ello distorsionar el sonido del subwoofer. Dentro del adaptador hay varios condensadores y resistencias si no me equivoco, para ajustar las frecuencias del subwoofer y de los altavoces traseros. Al mismo tiempo, también muestro cómo solucionar el problema con el volumen del subwoofer que no se puede apagar. Mira aquí el enlace. ua-cam.com/video/DCDA5lMWLG4/v-deo.htmlsi=_ns83fU0kKhkFo4T
Hola, no entendí exactamente qué problema tienes, pero si el sistema no enciende en absoluto, ¡puede que el transformador esté defectuoso! ¡Este sistema tuvo muchos problemas con el transformador, que después de unos años falla! ¡Puedes probar con un transformador de 12V 5A para ver si funciona!
Hello, this system has always had problems with the transformer that powers the system! Check if you have 12V at this transformer! It is found inside the subwoofer! Watch an informative video on how to disassemble the amplifier from the subwoofer! ua-cam.com/video/DCDA5lMWLG4/v-deo.html
@@ElektroGamer30 thank you for your answer 👍🏻The power from the subwoofer seems ok since the typical sound of an electric device is continuously audible. I was wondering about the amp which is vga typed cabled...but I will go for your advice to check the 12V in the subwoofer too. Sorry about the english, and thanks again 😉
@@BorisIdlomir You can also check the VGA cable, there have been people who have said that the VGA plug keeps getting damaged and doesn't make good contact anymore, and that's why a speaker doesn't work or the system doesn't start!
@@ElektroGamer30 thanks again, i will check that 👍🏻 I didn't even know a vga cable could drain power supply 😦 Because it is the case with this device isn't it?
@@BorisIdlomir With pleasure. There is a risk that the cable inside will be damaged, and it will no longer make contact, or a pin will no longer make contact with the plug and because of this the system will not start.
Hello, I wanted to ask you about replacing the membranes in x530 5.1. Could I easily transfer the membranes from the rear speakers (which is intact) to the satellite (whose membranes is dented). Is each speaker membranes separate, soldered or will it fit the others? Kind regards
@@wyszynskim9132 I didn't understand exactly what you want to do. You can directly replace the speakers. You take them apart and they are fastened with screws. you change them and that's it. There is no need to peel off the diaphragms from the speakers and replace them with the front ones that are broken. Aa.. If the speakers are burnt and they have good membranes, yes, you can replace them, but it's more complicated. Better buy other speakers. I paid 7 euros for the entire Logitech X530 system.
@@ElektroGamer30 Simply I just want to replace the dented diaphragms (there is nothing wrong with them or with the entire set, whole set works) from the rear speaker to the satellite. (all 5.1 power was not used). Would this replacement of diaphragms be complicated by any permanent soldering or is it simply screwed on? (because it's not particularly visible in the video, you can only see the soldered satellite board) Thanks for the answer
@@wyszynskim9132 The speakers are attached with screws to the plastic housing (can be seen at minute 5:55) You can easily replace them. If you want to use the 5.1 system so that all the speakers work, you have to make the changes that I also made in the following video. (on the speaker on the right in front of the one with the volume button) to receive a stereo signal and give it to all the speakers, because on the PC all the speakers will work only when you watch 5.1 movies, otherwise for music or anything else it will only work the front speakers and the subwoofer. Here's the link: (min 28:00) ua-cam.com/video/DCDA5lMWLG4/v-deo.htmlsi=y3UPsTr64nTpR3Lg
@@wyszynskim9132 Only the speaker itself is attached with screws to the plastic case. The all-cone membrane is glued and is more difficult to peel off and glue to another speaker. I don't know exactly how these speakers are built, but you better replace them completely with new speakers. If not, you can try to peel them off, but without breaking them it's a bit difficult.
How to solve the problem when something buzzes inside the subwoofer near the connection connectors. And also wanted to ask, is this a solution to the problem with the speakers humming at maximum volume?
Hello, that noise can be produced by the transformer! If the system is off and you can still hear that noise, then it's because of the transformer! As far as I know, this model had several problems with the transformer, which after a few years stopped working! I don't know exactly what problem you have at maximum volume, for me it just distorts because of the too low power amplifier! ua-cam.com/video/DCDA5lMWLG4/v-deo.html
@@andriandemyanovskyi8842 I don't know exactly where this problem comes from! Have you also checked that the speakers are not cracked, broken or have a broken membrane?
By adding that wire, you bridge the connection between the ground wire (minus) from the jack with the minus on the board inside the speaker, it connects to the minus (earthing) that leads inside to the subwoofer where the amplifier board is located!
Hi Electro. When I have all the speakers connected to the woofer, the bottom right where you adjust the volume does not play. When I disconnect the other 4 speakers it plays very slowly. You know why he does this.
I didn't understand anything you wrote. When all 4 speakers are connected, the speaker on the right, the one with the volume button on it, does not play sound. When the 4 speakers are disconnected, the speaker on the right remains connected alone because it is the one with volume, it plays sound but it does not play the sound as strong as it should. I understood well ? If so, check the speakers first. You open the box from the right speaker and attach a small test speaker to the speaker wires, that way you can tell if the Amplifier is the problem or if the speakers are burnt.
@@mpidark And the speakers can play sound when they are almost burned out. Also pay attention to the connection cable, the wires inside it are destroyed, several wires pass through it, including the one from the right speaker. You can also open the subwoofer and check on the amplifier board if there is something burnt! You can check directly on the board if the problem comes from the TDA or from the wires. Attention that inside each speaker there is a series connection for the 2 speakers in each box. They are also connected with a capacitor, check this first time, it is simpler than checking the amplifier. At minute 3:16 you can see the connection of the speakers in series and that capacitor on one of the speakers.
Si te ayuda, ¡tengo otro video sobre cómo resolver un problema con este sistema logitech x530! ua-cam.com/video/DCDA5lMWLG4/v-deo.htmlsi=OsQueDQofG-fAZyr
Hello, if you only have the subwoofer with the amplification part, you can make an adapter plug to use the amplifier in the subwoofer! Connect pin 12 and pin 8 of the plug on the subwoofer to a switch, it will turn the amplifier on and off! Connect pin 10 to minus jack 3.5, and pin 6 to + jack 3.5! This is how the subwoofer will work without the rest of the speakers!@@jamalsibera3116
Hello, sometimes if the jack plug is not connected and it touches something (the floor, a metal part, your hand) it can produce some noises in the speakers! If you connect the jack plug to the PC, do you still have those noises?
@@ElektroGamer30 farts like a connection to a computer and if not connected, I tried a different contact and still the same. Farts without adjusting the volume all the time
@@Michael-rd4mo I don't quite understand exactly what you mean! Is this noise present in all the speakers including the subwoofer or is it only from the subwoofer? Do you also have this noise when the system is turned off from the right front speaker, when the green LED is off? Does the system work correctly if it is connected to the PC?
Hi Elektro Gamer , i have a problem with mi front right speaker (the speaker that have the headphone jack) "main" ..... all the speakers sounds at normal good volmume, but this sounds to low volume, , i test it disconecting all cables and only test this and the same, the sub sound normal but this speaker front right the main at full volume sound too low at full volume ,
I don't know exactly what the problem is, but I think there's something on the amplification side. In the first phase, try to replace the 2 speakers. (Unwind the wires and touch them to another speaker) Also check inside the subwoofer, maybe a swollen capacitor is causing this problem. But the fastest test is with the jack. It's just like a headset. (when you were listening to music on your headphones when you were young and suddenly one headset sounds good and the other one has a low and unclear sound, and in the case of speakers it can be the same, only on the right front channel is the problem. If you connect the green jack to the phone, is it the same problem? If there is a small difference in sound, almost imperceptible, it is normal. (My system is the same, you can set the right front sound to 98% and the left one to 100%) Here is a video made by me, to see how the amplification board is removed. ua-cam.com/video/DCDA5lMWLG4/v-deo.html
Hola, perdón por la respuesta tardía. Compruebe el conector jack para comprobar que el cable no esté defectuoso. Excepto como ocurre con los auriculares para teléfono, sólo funciona un auricular y cuando mueves el jack, el otro también funciona. Puedes abrir el altavoz central a la derecha y conectar los cables exactamente como lo hice en el video, para que todo el sistema 5.1 funcione en un solo conector.
@@eduardoveytia244 También puedes intentar verificar el conector VGA que va a la caja del subwoofer. Existe el riesgo de que se dañe y no haga buen contacto y por eso no funcione. Puede comprobar el interior del subwoofer si hay algún daño. Pon la música en el conector jack negro y comprueba con un pequeño altavoz si la señal llega a la placa base dentro del subwoofer, de esa forma sabrás si la señal de sonido llega al cableado de la placa base o si hay un problema de falso contacto.
Am incercat 2 variante, sa ating - de la jack pe carcasa la pc.(inca aveam problema cu acest zgomot, dar nu atat de pronuntat) Si dupa am incercat si varianta din video. (asta a fost cea mai buna)
Tengo unas Logitech X-230 el cual el parlante derecho deja de funcionar algunas veces y vuelve por si solo. Queda solo emitiendo sonido el parlante izquierdo. ¿Alguna idea? algún condensador?
Buenas noches escribo por quw adquirido un equipo de bocinas de esa espero no suena lo suficiente como suenan medi cuenta que es la bocina que tiene el boto de apagado que tiene problema que puedo hacer ?
Ahoj. Je možné i jiné připojení. Ale je to asi trochu složitější. Dal jsem 10 eur za celý systém, myslím, že jen hlavní reproduktor bude stát mnohem méně.
Hey dude can you help me? ALL off my speakers work but after some time like 10 or 15 min connected to the phone or the Pc playing some music, the sound simply dissapear, It gets mute and come back like after 1 hour, i have a x530 too, can u help me? Cheers from brazil
Hi, your problem seems to be overheating a component inside the subwoofer. It must be unwrapped and checked what is overheating. Another good question would be. Do you use the original speakers without other modifications made by you or someone else? Is the subwoofer the original one and the speakers (front, rear and center)?
@@chakajr11 So the front left and right speakers, the center speaker and the subwoofer work. The rear speakers do not work. You would say that the yellow and the black plug have problems. They are from surround speakers! What problems do they have exactly? Are they moving, are they broken ??
@@ElektroGamer30 I’m not sure what exact problem it is, i just plug them in and no sound comes out on those two. Every other speakers, sound does come out.
Si, es normal. Si lo hace como en este video hecho por mí, todo suena igual de fuerte. Es solo que no hay efecto de 5.1 Solo desde el minuto 26:13 ua-cam.com/video/DCDA5lMWLG4/v-deo.html
@@ElektroGamer30 quisiera saber como debo preguntar o averiguar el parlante que se conecta al subwoofer es decir el parlante principal, que cuesta y si aun se consigue, muchisimas gracias por su respuesta
@@caal1985 Te refieres al altavoz frontal derecho, el que maneja la parte de entrada, con el botón de volumen y encendido. Para comprarlo puedes encontrarlo de alguien que ya no lo usa. Pagué 15 euros por mi sistema x530, será mejor que compres otro sistema. ¿Y cuál es el problema de querer reemplazarlo?
@@ElektroGamer30 exacto. solo que soy de colombia aca todo es mas costoso. y pues es sonido bueno solo que se me daño y queria saber si ese parlante se consigue aun.
o no se si pueda modificar la alimentación de esta bocina,no se a cuantos voltios y de amperes corresponde alimentarle o que alternativa me das? gracias.
@@elvaledorcarnal Si solo tienes el altavoz principal, el que tiene los botones de subir volumen y encender/apagar, no puedes hacer nada con él sin encender el subwoofer. no puede conectar el altavoz con el cable VGA a un monitor o cualquier otra cosa que no sea el subwoofer. La parte de amplificación está en la caja del subwoofer.
lo que pasa es que compre solo el aparato que arreglaste en el video,no tengo las demás bocinas y subwoofer pensando que tal vez pueda hacer uso de estae aparato de otra forma conectándolo sin el subwoofer,pero me respondes que si es necesario el subwoofer para que funcione.Pues tendré que usar solo las bocinas con un amplificador que vendan en internet, mas que nada darles otro uso y no tirarlos,no se si puedas recomendarme un amplificador para las dos bocinas que trae por dentro este aparato,saludos.
Hy, hat irgendwer nen Plan, wo man zu genau diesem x-530 nen Schaltplan findet? Ich war heut mit meinem Gerät bei dem Repair Cafe und wir brauchen nen Plan, sonst messen wir uns zu tode. LG
@@ElektroGamer30 Hy, danke für die Antwort. Nun, ich hatte die Audioausgängegetauscht auf der Platine, da die Kontakte einfach abgenutzt waren. Danach kam gar keine Musik mehr aus den Boxen. Verstärker haben wir beide Module durchgemessen. Travo ist auch OK von beiden Seiten. Boxen haben Durchgang und sind verbunden. Die Platine in der externen Steuerbox ist auch OK. Der 15 Polstecker ist OK. Es wird irgend ein klitzekleines Detail sein, was wir nicht finden.
@@udufbxsixn Hallo, sorry für die späte Antwort! Überprüfen Sie die SMD-Bauteile, die sich neben den von Ihnen geänderten Cinch-Steckern befinden! Überprüfen Sie auch die Kontaktstifte am neuen Stecker, den Sie einstecken. Bei großer Hitze verschlechtert sich das Motherboard sehr schnell und es besteht die Gefahr eines (Kurzschlusses) zwischen dem Steckerstift und dem großen Minus auf dem Motherboard!
No tengo que decir nada. ¡Te he mostrado absolutamente todos los detalles que necesitas saber, para poder imitar lo que ves en el video! Si estuviera hablando y explicando en mis términos, probablemente no entenderías nada y me pedirías que hiciera un vídeo mostrando paso a paso lo que hay que hacer. (Es decir, exactamente como lo hice en este video) ¡Cualquiera que lo mire puede imitarlo todo perfectamente!
I own this system since 2008, I am very satisfied with it!
Hello, I have been using this system for 3 years, and I can say that I am satisfied.
With small adjustments made by me, I managed to make it more to my liking :)
Look here and the solution to the subwoofer volume that cannot be set to 0!
ua-cam.com/video/DCDA5lMWLG4/v-deo.html
This modification is really worth doing!
My X530 turns on but there's no sound coming from it. However, sound comes out from headphones when I connect to the 3.5mm jack. Could this be the solution?
The problem may be from the amplifier!
Either it doesn't receive a signal anymore, or it doesn't output it anymore!
You have to open the subwoofer and check if there is something damaged or smoked and check if it receives a signal on the board and further if that signal reaches the amplifier and if it comes out to the speakers!
The headphones work because the signal from the headphones is taken from the unamplified input!
The signal that comes out of the PC and enters the right speaker is connected via a potentiometer and directly to the headphone jack!
It has nothing to do with the amplifier board or any part of the filters!
Tengo ese modelo y lo tengo conectado con un adaptador de RCA a Plug 3.5 mm (3 salidas) y no suena lo suficiente, el subwoofer distorsiona, la calidad de sonido no es muy buena, ¿ Es normal? ¿Como puedo mejorar el sonido? Ya revise la tarjeta y verifique capacitores y esta todo normal, todas las cornetas suenan pero el sonido es deficiente
Hola, realmente no se puede sacar mucho sonido de este sistema.
Es de baja potencia y el subwoofer no tiene ese potenciómetro regulable para poder frenar los graves definitivamente.
Si lo configura al mínimo, el subwoofer sigue siendo bastante ruidoso.
Tengo otro video donde mostré cómo puedes conectar 3 enchufes Jack para hacer solo uno.
De esa forma tendrás todas las entradas directamente para que no necesites más ese adaptador.
Ese adaptador también puede estar defectuoso y por ello distorsionar el sonido del subwoofer.
Dentro del adaptador hay varios condensadores y resistencias si no me equivoco, para ajustar las frecuencias del subwoofer y de los altavoces traseros.
Al mismo tiempo, también muestro cómo solucionar el problema con el volumen del subwoofer que no se puede apagar.
Mira aquí el enlace.
ua-cam.com/video/DCDA5lMWLG4/v-deo.htmlsi=_ns83fU0kKhkFo4T
Tengo uno igual q no enciende pero lafuente si funciona precio o el boton y no prende el led q cre q puedaser
Hola, no entendí exactamente qué problema tienes, pero si el sistema no enciende en absoluto, ¡puede que el transformador esté defectuoso!
¡Este sistema tuvo muchos problemas con el transformador, que después de unos años falla!
¡Puedes probar con un transformador de 12V 5A para ver si funciona!
Hi! My "main speaker" the one you turn power on with the green light (the one you open in this video) wont power.
Any idea how to fix this?
Thanks 😊
Hello, this system has always had problems with the transformer that powers the system!
Check if you have 12V at this transformer!
It is found inside the subwoofer!
Watch an informative video on how to disassemble the amplifier from the subwoofer!
ua-cam.com/video/DCDA5lMWLG4/v-deo.html
@@ElektroGamer30 thank you for your answer 👍🏻The power from the subwoofer seems ok since the typical sound of an electric device is continuously audible.
I was wondering about the amp which is vga typed cabled...but I will go for your advice to check the 12V in the subwoofer too.
Sorry about the english, and thanks again 😉
@@BorisIdlomir
You can also check the VGA cable, there have been people who have said that the VGA plug keeps getting damaged and doesn't make good contact anymore, and that's why a speaker doesn't work or the system doesn't start!
@@ElektroGamer30 thanks again, i will check that 👍🏻
I didn't even know a vga cable could drain power supply 😦
Because it is the case with this device isn't it?
@@BorisIdlomir With pleasure.
There is a risk that the cable inside will be damaged, and it will no longer make contact, or a pin will no longer make contact with the plug and because of this the system will not start.
Yo bro this video sick keep up the good work
Thx!!! :X
Que potencia watts tienen los drivers?
Satellite speakers RMS power 45 W
Subwoofer RMS power 25 W
awesome vid man subbed
Thxx!
Hello, I wanted to ask you about replacing the membranes in x530 5.1. Could I easily transfer the membranes from the rear speakers (which is intact) to the satellite (whose membranes is dented). Is each speaker membranes separate, soldered or will it fit the others? Kind regards
@@wyszynskim9132 I didn't understand exactly what you want to do.
You can directly replace the speakers.
You take them apart and they are fastened with screws.
you change them and that's it. There is no need to peel off the diaphragms from the speakers and replace them with the front ones that are broken.
Aa.. If the speakers are burnt and they have good membranes, yes, you can replace them, but it's more complicated.
Better buy other speakers.
I paid 7 euros for the entire Logitech X530 system.
@@ElektroGamer30 Simply I just want to replace the dented diaphragms (there is nothing wrong with them or with the entire set, whole set works) from the rear speaker to the satellite. (all 5.1 power was not used). Would this replacement of diaphragms be complicated by any permanent soldering or is it simply screwed on? (because it's not particularly visible in the video, you can only see the soldered satellite board) Thanks for the answer
@@wyszynskim9132
The speakers are attached with screws to the plastic housing (can be seen at minute 5:55)
You can easily replace them.
If you want to use the 5.1 system so that all the speakers work, you have to make the changes that I also made in the following video. (on the speaker on the right in front of the one with the volume button) to receive a stereo signal and give it to all the speakers, because on the PC all the speakers will work only when you watch 5.1 movies, otherwise for music or anything else it will only work the front speakers and the subwoofer.
Here's the link: (min 28:00)
ua-cam.com/video/DCDA5lMWLG4/v-deo.htmlsi=y3UPsTr64nTpR3Lg
@@ElektroGamer30 And the diaphragms don't have any separate cables, they are just screwed on? I'm asking to be sure
@@wyszynskim9132 Only the speaker itself is attached with screws to the plastic case.
The all-cone membrane is glued and is more difficult to peel off and glue to another speaker.
I don't know exactly how these speakers are built, but you better replace them completely with new speakers.
If not, you can try to peel them off, but without breaking them it's a bit difficult.
How to solve the problem when something buzzes inside the subwoofer near the connection connectors. And also wanted to ask, is this a solution to the problem with the speakers humming at maximum volume?
Hello, that noise can be produced by the transformer!
If the system is off and you can still hear that noise, then it's because of the transformer!
As far as I know, this model had several problems with the transformer, which after a few years stopped working!
I don't know exactly what problem you have at maximum volume, for me it just distorts because of the too low power amplifier!
ua-cam.com/video/DCDA5lMWLG4/v-deo.html
@@ElektroGamer30 The problem appears only when playing music, if something rattles when the bass is playing
@@andriandemyanovskyi8842 I don't know exactly where this problem comes from!
Have you also checked that the speakers are not cracked, broken or have a broken membrane?
@@ElektroGamer30 The speakers are not cracked, most likely something on the main board has become detached from the glue and is rattling
Open the enclosure to the subwoofer and check what is detached!
It may even be the transformer! @@andriandemyanovskyi8842
I hear sometimes this "pop" too on my x-530, maybe about one per hour, Ok you add a wire, but what does it do exactly ? thank's!
By adding that wire, you bridge the connection between the ground wire (minus) from the jack with the minus on the board inside the speaker, it connects to the minus (earthing) that leads inside to the subwoofer where the amplifier board is located!
@@ElektroGamer30 ok nice ! thanks !!
tengo un x530 prend pero no meda sonido los satelite yel bajo estan bueno pero el problema es q no me da sonido como aira en ese caso
Saque la placa amplificadora del interior del subwoofer, ¡es posible que algo haya explotado en el interior!
Vague title and the music is overbearing - besides that it’s still a very good video and great share. Thanks for sharing. 👍
Thanks for your feedback!!
Hi Electro. When I have all the speakers connected to the woofer, the bottom right where you adjust the volume does not play. When I disconnect the other 4 speakers it plays very slowly. You know why he does this.
I didn't understand anything you wrote.
When all 4 speakers are connected, the speaker on the right, the one with the volume button on it, does not play sound.
When the 4 speakers are disconnected, the speaker on the right remains connected alone because it is the one with volume, it plays sound but it does not play the sound as strong as it should.
I understood well ?
If so, check the speakers first.
You open the box from the right speaker and attach a small test speaker to the speaker wires, that way you can tell if the Amplifier is the problem or if the speakers are burnt.
Yes you understand very well
If the speaker was burnt it wouldn't play at all. If it plays even slowly then the problem is in the amplifier.
@@mpidark And the speakers can play sound when they are almost burned out.
Also pay attention to the connection cable, the wires inside it are destroyed, several wires pass through it, including the one from the right speaker.
You can also open the subwoofer and check on the amplifier board if there is something burnt!
You can check directly on the board if the problem comes from the TDA or from the wires.
Attention that inside each speaker there is a series connection for the 2 speakers in each box.
They are also connected with a capacitor, check this first time, it is simpler than checking the amplifier.
At minute 3:16 you can see the connection of the speakers in series and that capacitor on one of the speakers.
Thxx!!!!
Do you have x530 satellite-subwoofer dsub connection wiring schema?
Hello. I do not have!
@@ElektroGamer30 Ok, thanks.
Como puedo dejar que funciona solo este que has reparado
Hola, no entendí la pregunta!
¿Cuál es el problema con su sistema Logitech?
Si te ayuda, ¡tengo otro video sobre cómo resolver un problema con este sistema logitech x530!
ua-cam.com/video/DCDA5lMWLG4/v-deo.htmlsi=OsQueDQofG-fAZyr
@@ElektroGamer30 tengo solo uno y quiero hacerle funcionar solo
Hello, if you only have the subwoofer with the amplification part, you can make an adapter plug to use the amplifier in the subwoofer!
Connect pin 12 and pin 8 of the plug on the subwoofer to a switch, it will turn the amplifier on and off!
Connect pin 10 to minus jack 3.5, and pin 6 to + jack 3.5!
This is how the subwoofer will work without the rest of the speakers!@@jamalsibera3116
👍🏼👍🏼
Suddenly my power-on speaker started farting without connecting the cable to the PC, what is the reason?
Hello, sometimes if the jack plug is not connected and it touches something (the floor, a metal part, your hand) it can produce some noises in the speakers!
If you connect the jack plug to the PC, do you still have those noises?
@@ElektroGamer30 farts like a connection to a computer and if not connected, I tried a different contact and still the same. Farts without adjusting the volume all the time
@@ElektroGamer30 What can I check to fix this buzzing??please help me😉
@@Michael-rd4mo I don't quite understand exactly what you mean!
Is this noise present in all the speakers including the subwoofer or is it only from the subwoofer?
Do you also have this noise when the system is turned off from the right front speaker, when the green LED is off?
Does the system work correctly if it is connected to the PC?
si no enciende el foco con eso queda?
¡No entiendo la pregunta!
no prende la bocina como se puede arreglar
todo es algún lugar para llevarla
@@yaelcorona4254 ¡Reemplaza el transformador dentro del subwoofer!
La traducción no es buena, ¡no entiendo exactamente cuál es tu problema! :)
@@ElektroGamer30 tienes algún video de cómo hacerlo ?
Hi Elektro Gamer , i have a problem with mi front right speaker (the speaker that have the headphone jack) "main" ..... all the speakers sounds at normal good volmume, but this sounds to low volume, , i test it disconecting all cables and only test this and the same, the sub sound normal but this speaker front right the main at full volume sound too low at full volume ,
I don't know exactly what the problem is, but I think there's something on the amplification side.
In the first phase, try to replace the 2 speakers. (Unwind the wires and touch them to another speaker)
Also check inside the subwoofer, maybe a swollen capacitor is causing this problem.
But the fastest test is with the jack.
It's just like a headset. (when you were listening to music on your headphones when you were young and suddenly one headset sounds good and the other one has a low and unclear sound, and in the case of speakers it can be the same, only on the right front channel is the problem.
If you connect the green jack to the phone, is it the same problem?
If there is a small difference in sound, almost imperceptible, it is normal.
(My system is the same, you can set the right front sound to 98% and the left one to 100%)
Here is a video made by me, to see how the amplification board is removed.
ua-cam.com/video/DCDA5lMWLG4/v-deo.html
Hola
Tengo el x530 pero uno de los altavoces del auxiliar negro no se escucha solo hace un zumbido.
¿Cómo puedo solucionar el problema?
GRACIAS
Hola, perdón por la respuesta tardía. Compruebe el conector jack para comprobar que el cable no esté defectuoso. Excepto como ocurre con los auriculares para teléfono, sólo funciona un auricular y cuando mueves el jack, el otro también funciona. Puedes abrir el altavoz central a la derecha y conectar los cables exactamente como lo hice en el video, para que todo el sistema 5.1 funcione en un solo conector.
Ya le cheque eso pero todos están normal no tienen ningún falsos contacto
@@eduardoveytia244 También puedes intentar verificar el conector VGA que va a la caja del subwoofer. Existe el riesgo de que se dañe y no haga buen contacto y por eso no funcione. Puede comprobar el interior del subwoofer si hay algún daño. Pon la música en el conector jack negro y comprueba con un pequeño altavoz si la señal llega a la placa base dentro del subwoofer, de esa forma sabrás si la señal de sonido llega al cableado de la placa base o si hay un problema de falso contacto.
How did you find the solution?
Am incercat 2 variante, sa ating - de la jack pe carcasa la pc.(inca aveam problema cu acest zgomot, dar nu atat de pronuntat)
Si dupa am incercat si varianta din video. (asta a fost cea mai buna)
Tengo unas Logitech X-230 el cual el parlante derecho deja de funcionar algunas veces y vuelve por si solo. Queda solo emitiendo sonido el parlante izquierdo. ¿Alguna idea? algún condensador?
Revisa la placa del amplificador, puede que haya algo desprendido de ella, o puede que haya un contacto frío en los pines del TDA.
Buenas noches escribo por quw adquirido un equipo de bocinas de esa espero no suena lo suficiente como suenan medi cuenta que es la bocina que tiene el boto de apagado que tiene problema que puedo hacer ?
¿Cuál es el problema?
¿El sistema no arranca?
¿Solo no se escucha el altavoz frontal derecho (el que tiene botones)?
Ahoj prosimte poradi mi nekdo kdys sem stratil ten malej reprak stim hlavnim pripojenim jestli se to da napojit jinak dik za radi
Ahoj. Je možné i jiné připojení. Ale je to asi trochu složitější.
Dal jsem 10 eur za celý systém, myslím, že jen hlavní reproduktor bude stát mnohem méně.
Hey dude can you help me? ALL off my speakers work but after some time like 10 or 15 min connected to the phone or the Pc playing some music, the sound simply dissapear, It gets mute and come back like after 1 hour, i have a x530 too, can u help me? Cheers from brazil
Hi, your problem seems to be overheating a component inside the subwoofer.
It must be unwrapped and checked what is overheating.
Another good question would be.
Do you use the original speakers without other modifications made by you or someone else?
Is the subwoofer the original one and the speakers (front, rear and center)?
@@ElektroGamer30 you have whattsup dude? Can u help me?¿
@@ElektroGamer30 can you pass me your number?
Or pass me your Facebook link for us to chat
@@DragonFoust twitter.com/CsGo54556456
My Twitter!
What if there’s no sound coming out of the speakers? I have an issue with the yellow and black connection
No sound on any speaker?
Or only the surround ones don't work?
@@ElektroGamer30 i have sound on 2 surround and the sub speakers, expect the yellow and black connections. Those 2 are what are not working for me
@@chakajr11 So the front left and right speakers, the center speaker and the subwoofer work.
The rear speakers do not work.
You would say that the yellow and the black plug have problems.
They are from surround speakers!
What problems do they have exactly?
Are they moving, are they broken ??
Ignore “except” 🤦🏽♂️
@@ElektroGamer30 I’m not sure what exact problem it is, i just plug them in and no sound comes out on those two. Every other speakers, sound does come out.
Nice.
Thx!!
E comprado uno de segunda mano pero el parlante que va horizontal suena un poquito más bajo que los demás esto es normal ?
Si, es normal.
Si lo hace como en este video hecho por mí, todo suena igual de fuerte.
Es solo que no hay efecto de 5.1
Solo desde el minuto 26:13
ua-cam.com/video/DCDA5lMWLG4/v-deo.html
el mio no suena
el parlante que arreglas se puede conseguir? el mio se daño y obvio el resto no funciona. me podrias ayudar
Hola.
¿Cómo puedo ayudar?
Este sistema cuesta $ 15
No vale la pena reparaciones costosas.
@@ElektroGamer30 quisiera saber como debo preguntar o averiguar el parlante que se conecta al subwoofer es decir el parlante principal, que cuesta y si aun se consigue, muchisimas gracias por su respuesta
@@caal1985 Te refieres al altavoz frontal derecho, el que maneja la parte de entrada, con el botón de volumen y encendido.
Para comprarlo puedes encontrarlo de alguien que ya no lo usa.
Pagué 15 euros por mi sistema x530, será mejor que compres otro sistema.
¿Y cuál es el problema de querer reemplazarlo?
@@ElektroGamer30 exacto. solo que soy de colombia aca todo es mas costoso. y pues es sonido bueno solo que se me daño y queria saber si ese parlante se consigue aun.
@@caal1985 Ya no está disponible.
se puede conectar esa bocina a una pantalla directamente?
¿A qué conectarlo?
cable VGA a la pantalla y que suene su bocina,se podrá?
o no se si pueda modificar la alimentación de esta bocina,no se a cuantos voltios y de amperes corresponde alimentarle o que alternativa me das? gracias.
@@elvaledorcarnal Si solo tienes el altavoz principal, el que tiene los botones de subir volumen y encender/apagar, no puedes hacer nada con él sin encender el subwoofer.
no puede conectar el altavoz con el cable VGA a un monitor o cualquier otra cosa que no sea el subwoofer.
La parte de amplificación está en la caja del subwoofer.
lo que pasa es que compre solo el aparato que arreglaste en el video,no tengo las demás bocinas y subwoofer pensando que tal vez pueda hacer uso de estae aparato de otra forma conectándolo sin el subwoofer,pero me respondes que si es necesario el subwoofer para que funcione.Pues tendré que usar solo las bocinas con un amplificador que vendan en internet, mas que nada darles otro uso y no tirarlos,no se si puedas recomendarme un amplificador para las dos bocinas que trae por dentro este aparato,saludos.
Hy, hat irgendwer nen Plan, wo man zu genau diesem x-530 nen Schaltplan findet? Ich war heut mit meinem Gerät bei dem Repair Cafe und wir brauchen nen Plan, sonst messen wir uns zu tode. LG
Hallo, ich glaube nicht, dass es existiert!
Welches Problem hat Ihr Logitech X530-System?
@@ElektroGamer30 Hy, danke für die Antwort. Nun, ich hatte die Audioausgängegetauscht auf der Platine, da die Kontakte einfach abgenutzt waren. Danach kam gar keine Musik mehr aus den Boxen. Verstärker haben wir beide Module durchgemessen. Travo ist auch OK von beiden Seiten. Boxen haben Durchgang und sind verbunden. Die Platine in der externen Steuerbox ist auch OK. Der 15 Polstecker ist OK. Es wird irgend ein klitzekleines Detail sein, was wir nicht finden.
@@udufbxsixn Hallo, sorry für die späte Antwort!
Überprüfen Sie die SMD-Bauteile, die sich neben den von Ihnen geänderten Cinch-Steckern befinden!
Überprüfen Sie auch die Kontaktstifte am neuen Stecker, den Sie einstecken.
Bei großer Hitze verschlechtert sich das Motherboard sehr schnell und es besteht die Gefahr eines (Kurzschlusses) zwischen dem Steckerstift und dem großen Minus auf dem Motherboard!
Videos mudos y tanpoco se supo q le hiso
No tengo que decir nada.
¡Te he mostrado absolutamente todos los detalles que necesitas saber, para poder imitar lo que ves en el video!
Si estuviera hablando y explicando en mis términos, probablemente no entenderías nada y me pedirías que hiciera un vídeo mostrando paso a paso lo que hay que hacer. (Es decir, exactamente como lo hice en este video)
¡Cualquiera que lo mire puede imitarlo todo perfectamente!
Another music video made by a mute. Nothing to learn here... 😫
@@byronarriola4304 If you don't like it, stop solving your problems by watching my videos.
Thank you!