Hi John... that's an excellent idea and I'll be passing your suggestion along. In fact, I think what I'll do is suggest a landing page for each product that has everything a user might need to know, including the manual and any how-to videos we have for the product. And I think the plan, going forward, is to include a QR code that opens up a page like I just described. Thx John.
What a great clear explanation on the operation and setting up of this unit. Thank you so much for this video. What interval ( hrs) should a M2 D4R be serviced at and what does this maintenance consist of
Hi Richard. I'm glad you liked the video and found it informative. As for answering your question, the best thing would be to contact Technical Support at 1-800-387-4800 X2299 and/or help@eberspaecher.com.
At 1:03:00 i cannot read the info on the screen very well. Where can I find this? I have many espar technical manuals but I have not found this page for connecting 2 heaters to 1 easystart pro.
Apologies for the delay... was waiting to hear back from someone in our training department. Apparently there is an addendum sheet for the special wiring that I can send you if you send me your email address through Facebook Messenger. Eberspaecher North America is our Facebook account. Hope this helps, if you haven't already found the answer.
@EberspaecherNorthAmerica thank you, yes i did find the AX3 addendum. It was very detailed and exactly what i needed. I now have both my airtronic and hydronic working on one easystart.
So do you need a separate connection to hook up both Airtronic and Hydronic heaters to one single East start pro? The info is horrible on it and nobody can answer my question.
Hi and my apologies for the tardy response and I'm sorry about your issue. You can contact Technical Support at 1-800-387-4800 X2299 and/or help@eberspaecher.com.
Yes it was simple. I just called and ordered the separate cable that is just a daisy chain you add on and plug into the heaters. I forget the part number but they know what you are looking for of you call a dealer
Will it hurt anything to leave the high altitude mode on when not at high altitude? If it just reduces fuel then the heating capacity would be reduced, but if it overspeeds the fan, then shorter fan life would be expected, Can you tell me which it does in the high altitude mode?
If you are using a Hydronic S3 CS 12 V with EasyStart Pro, the high altitude mode should be manually turned ON for continuous use in altitudes between 1,500 meters (5,000 ft) and 3,000 meters (10,000 ft) and it should be manually turned OFF for continuous use in altitudes below 1,500 meters (5,000 ft). Using the high altitude mode decreases the amount of fuel delivered, so if incorrectly used continuously in lower altitudes it can increase the risk of flame loss when combined with other factors.
Apologies for taking so long to get back to you with an answer, Pat. Unfortunately, the answer is No. EasyStart PRO can be only used on heaters that have CAN communication. Hydronic II D5S heater does not have CAN communication.
Great guide except on my controller when I program no1 then move to nu2 , it shuts off nu1. I go back in and turn on nu1 again, it shuts off number 2. I havent even tried to program nu3 yet.
Apologies for the tardy response, Katt. And I'm sorry about your issue. I would suggest you reach out to our Technical Support Team at 1-800-387-4800 X2299 and/or help@eberspaecher.com. They will be more than happy to assist you and/or answer any questions you have. Please don't hesitate to reply to this message if you don't hear back from anyone and I'll personally forward your issue to the support team and make sure you receive a speedy reply/answer.
I have an Airtronic M2 D4L with an Easy Start PRO. Can I control the heat using the yellow wire from the harness and also keep the controller connected? I'm able to get heat when providing 12v+ to the yellow wire, but get an error on the controller screen. H1Restricted- P000130
The EasyStart Pro is a CAN-based only controller, so it uses only the blue-red and blue-black wires to communicate with the heater for all functionalities (e.g., to start and stop it, change temperature setpoint, …). Unless you have another analog controller in the circuit (which is providing its own temperature setpoint), I’d advise you not to turn your heater using the yellow wire, but instead control all heater functionalities directly at your EasyStart Pro. If using only the EasyStart Pro (and not the yellow wire) you keep seeing that code P000130, please contact our Technical Support Team at +1 800 387 4800 or email to ca-to-techservices@eberspaecher.com for additional help.
My temperature is displayed on the right ,like it should. But when I go to set the temp all that appears is minutes for running and no temp adjustment shows up next on the screen when I tun the dial. Can you help me please?
Hi Robert. Apologies for the tardy response and I'm sorry about your issue. You can contact Technical Support at 1-800-387-4800 X2299 and/or help@eberspaecher.com.
Hey Rayos. Apologies for the tardy response and I'm sorry about your issue. You can contact Technical Support at 1-800-387-4800 X2299 and/or help@eberspaecher.com.
hi ! can you use tghe easy start pro to control a ventilation unit (like kalori silencio2) linked to the hydronic heater? or do you need to install a separate control unit with a separate room temp sensor?
Hi Fabien and thank you for your question. According to our engineering depart, unfortunately the answer to your question is no. The EasyStart Pro is a CAN based controller and the ventilation units (like Kalori silencio 2) don’t have CAN communications built in. But I will definitely pass your question / suggestion on to our development team. I'd be surprised if this wasn't something they're already working on. If anything should develop in this area, I'll be sure to let you know about it. Again, your feedback is much appreciated, Fabien.
Hey Michael. My answer from tech support was “the EasyStart Pro software can be updated using the EasyScan diagnostic tool.” Hope this helps. Happy New Year!
We're sorry to hear you've had issues with the EasyStart displays. I encourage you to reach out to our technical support team, as Im sure they'd like to learn more about your issues so we can improve our displays. Technical Support can be reached at: 📞 1-800-387-4800 X2299 📧 help@eberspaecher.com Let me know of you don't hear back from them, Colin.
Hi, thanks for a very interesting and informative view of the easy start pro controller.
Glad it was helpful, Graham! Let me know if there's any other content you'd like to see as a video and I'll pass your request along.
I just wish this video (and any others) were noted in my manual!
Hi John... that's an excellent idea and I'll be passing your suggestion along. In fact, I think what I'll do is suggest a landing page for each product that has everything a user might need to know, including the manual and any how-to videos we have for the product. And I think the plan, going forward, is to include a QR code that opens up a page like I just described.
Thx John.
Good video. Thank you. Now I'm going to search for information on the plumbing.
Great, glad it was helpful to you, Nicholas!
Good, detailed overview! Thanks for posting.
You're very welcome. Glad you found it useful.
What a great clear explanation on the operation and setting up of this unit. Thank you so much for this video. What interval ( hrs) should a M2 D4R be serviced at and what does this maintenance consist of
Hi Richard. I'm glad you liked the video and found it informative. As for answering your question, the best thing would be to contact Technical Support at 1-800-387-4800 X2299 and/or help@eberspaecher.com.
At 1:03:00 i cannot read the info on the screen very well. Where can I find this? I have many espar technical manuals but I have not found this page for connecting 2 heaters to 1 easystart pro.
I found it, incase anyone else Is wondering it is in the" EasyStart Pro - Addendum"
Apologies for the delay... was waiting to hear back from someone in our training department. Apparently there is an addendum sheet for the special wiring that I can send you if you send me your email address through Facebook Messenger. Eberspaecher North America is our Facebook account. Hope this helps, if you haven't already found the answer.
@EberspaecherNorthAmerica thank you, yes i did find the AX3 addendum. It was very detailed and exactly what i needed.
I now have both my airtronic and hydronic working on one easystart.
So do you need a separate connection to hook up both Airtronic and Hydronic heaters to one single East start pro? The info is horrible on it and nobody can answer my question.
Hi and my apologies for the tardy response and I'm sorry about your issue. You can contact Technical Support at 1-800-387-4800 X2299 and/or help@eberspaecher.com.
Did you figure it out? Currently trying to do the same thing…
Yes it was simple. I just called and ordered the separate cable that is just a daisy chain you add on and plug into the heaters. I forget the part number but they know what you are looking for of you call a dealer
Will it hurt anything to leave the high altitude mode on when not at high altitude? If it just reduces fuel then the heating capacity would be reduced, but if it overspeeds the fan, then shorter fan life would be expected,
Can you tell me which it does in the high altitude mode?
If you are using a Hydronic S3 CS 12 V with EasyStart Pro, the high altitude mode should be manually turned ON for continuous use in altitudes between 1,500 meters (5,000 ft) and 3,000 meters (10,000 ft) and it should be manually turned OFF for continuous use in altitudes below 1,500 meters (5,000 ft). Using the high altitude mode decreases the amount of fuel delivered, so if incorrectly used continuously in lower altitudes it can increase the risk of flame loss when combined with other factors.
Can this be used with the Hydronic II D5S?
Apologies for taking so long to get back to you with an answer, Pat. Unfortunately, the answer is No. EasyStart PRO can be only used on heaters that have CAN communication. Hydronic II D5S heater does not have CAN communication.
@ thank you!
No problem, Pat. Just sorry it likely wasn't the answer you were looking for. All the best.
Great guide except on my controller when I program no1 then move to nu2 , it shuts off nu1. I go back in and turn on nu1 again, it shuts off number 2. I havent even tried to program nu3 yet.
Apologies for the tardy response, Katt. And I'm sorry about your issue. I would suggest you reach out to our Technical Support Team at 1-800-387-4800 X2299 and/or help@eberspaecher.com. They will be more than happy to assist you and/or answer any questions you have.
Please don't hesitate to reply to this message if you don't hear back from anyone and I'll personally forward your issue to the support team and make sure you receive a speedy reply/answer.
I have an Airtronic M2 D4L with an Easy Start PRO. Can I control the heat using the yellow wire from the harness and also keep the controller connected? I'm able to get heat when providing 12v+ to the yellow wire, but get an error on the controller screen. H1Restricted- P000130
The EasyStart Pro is a CAN-based only controller, so it uses only the blue-red and blue-black wires to communicate with the heater for all functionalities (e.g., to start and stop it, change temperature setpoint, …). Unless you have another analog controller in the circuit (which is providing its own temperature setpoint), I’d advise you not to turn your heater using the yellow wire, but instead control all heater functionalities directly at your EasyStart Pro.
If using only the EasyStart Pro (and not the yellow wire) you keep seeing that code P000130, please contact our Technical Support Team at +1 800 387 4800 or email to ca-to-techservices@eberspaecher.com for additional help.
@@EberspaecherNorthAmerica is there any way to control the heater remotely ?
My temperature is displayed on the right ,like it should. But when I go to set the temp all that appears is minutes for running and no temp adjustment shows up next on the screen when I tun the dial. Can you help me please?
Hi Robert. Apologies for the tardy response and I'm sorry about your issue. You can contact Technical Support at 1-800-387-4800 X2299 and/or help@eberspaecher.com.
Hello! I have an S3 B4E with numbers 20 2049 and 177467HF. Is this compatible? Will it let me set the room temperature?
Hey Rayos. Apologies for the tardy response and I'm sorry about your issue. You can contact Technical Support at 1-800-387-4800 X2299 and/or help@eberspaecher.com.
hi ! can you use tghe easy start pro to control a ventilation unit (like kalori silencio2) linked to the hydronic heater? or do you need to install a separate control unit with a separate room temp sensor?
Hi Fabien and thank you for your question. According to our engineering depart, unfortunately the answer to your question is no. The EasyStart Pro is a CAN based controller and the ventilation units (like Kalori silencio 2) don’t have CAN communications built in. But I will definitely pass your question / suggestion on to our development team. I'd be surprised if this wasn't something they're already working on. If anything should develop in this area, I'll be sure to let you know about it.
Again, your feedback is much appreciated, Fabien.
How do you update the software like you mentioned?
Hey Michael. My answer from tech support was “the EasyStart Pro software can be updated using the EasyScan diagnostic tool.” Hope this helps. Happy New Year!
These displays do not work in the cold. They are the worst thing out there for diesel heaters.
We're sorry to hear you've had issues with the EasyStart displays. I encourage you to reach out to our technical support team, as Im sure they'd like to learn more about your issues so we can improve our displays. Technical Support can be reached at:
📞 1-800-387-4800 X2299
📧 help@eberspaecher.com
Let me know of you don't hear back from them, Colin.