Một trong những kênh UA-cam đáng xem nhất Vn nhưng hầu hết khán giả đều là người nước ngoài vì sao? Vì nước ngoài thích tài năng khoa học kỹ thuật sáng tạo chứ không phải những cái vô bổ câu like câu view
Vì người nước ngoại ko có thợ lặt vặt như vn. Bên mỹ làm gì cũng phải có bằng. Ko như VN. Lên họ ko biết sửa chữa lên thíc xem video này. Vn thì đầy việc bạn thíc học sửa chữa oto miễn phí cũng có
1) как заменить в случае дтп задние фонари 2) как заменить в случае неисправности задние стойки 3) ручку задней двери можно было заварить, и зашпаклевать 4) зазоры на задней двери можно было сделать тоже самое что и с ручками 5) развернуть колеса и установить странное решение Есть много недочетов я так понимаю авто было сделанно только для контента. Но многие и такое не смогут сделать.
I am just in awe of the skill this man has.. Eventho it’s not all flawless, he did convert and “rebuild” a whole car, just to be able to relocate his plant.. 😅 you have to be able to pull it all of in the end !! Awesome build❤❤
That reminds me of earlier in the 70s, when we welded rusty cars like this back together in Germany... but we had to go to the technical inspection with it... installing the rims the wrong way would have been an absolute absurdity... even though the colleague acted very brutally, but still he deserves a medal for welding with electrodes...all respect! 🥇🏆... we used acetylene and oxygen for welding, until the mig mag or the wire welders came up. he did a lot of work, disassembled everything... he could have worked a little nicer... but he's still a talent👌😎
You are very polite. I respect the time Mr.Hô engaged into this conversion/restoration BUT it is not a proper work. In the mad Europe, the German TÜV would NEVER APPROVE this car. To me the worst about this car is the suppresion of structure bars in the trunks.
@@alexandrhrouz666 Early in the 70's doesn't mean "today". Nowadays, it is not about the police but about the official check to allow your car on the roads.
Nice idea 👍 Shame the rear towers didn't get reinforced, and then get completely covered with fibreglass! Lots of issues, with body, suspension, steering, even those rear lights are half done... Nice idea, just a bit rushed.
Don’t you recognize that all tool and equipment he have is : grinder , welder , antique hammer , and some very basis tool ? The point is he did an amazing job with what ever he has on hand which nothing .
Ok Mr. Ho this one is wild! Really Cool great job! LoL I'm so busy myself, I'm actually watching two of your shows right now at the same time trying to catch up😂🤣😂🤣😂 keep building my friend!
El Corolla Avila Uno De Esos Carros Que En Mi Pais Venezuela Son Un Patrimonio Rodante Estos Son Confiables,Divertidos,Faciles De Manejar Y Reparar Y Seguros Hoy En Dia Estos Autos Son Unos Clasicos Rodantes Que Aun Siguen Circulando Y Dando Batalla
Mr Ho you did it again beautiful work and a great imagination. Thank you for your time and I'll be waiting for the next video keep it up and God bless you sir.
This is pretty amazing. And I say this as someone who worked around body shops selling PB&E for years. I've seen a few conversions of this type done, and the only thing I can say that I would do differently would be a little stronger material at the top of the rear shock/strut towers and a heavier box system to tie the two upper rear towers together (probably a u shaped box to go under the rear window, with a couple of pillars down to the floor "frame"). Without it, I see some flex issues on the body/chassis, but overall it's amazing. I see some rust I would have cut out replaced as well to make it structurally stronger, but overall, I get the "where do I stop" question on an old beater like this... Also, MAD PROPS for using the stick welder on your sheet metal!
That is all you would do differently? Running those wheels backwards on cut up lug nuts is crazy. The strut towers yes need a heavier gauge material and bracing. The rear door latches were removed and not shown to go back in. Welding and filling in the rear door handles and rear door seam needed to be done as well to finish off the strength of cutting the rear structure completely out. Re bracing of the rear deck to the back of the car needed to be redone or kept in place.
Welding sheet metal with a stick welder isn't easy. It looks great, however, I am concerned about the rear shock towers not being strong enough. How do you plan to get at the mounting nuts now that they are covered with fiberglass?
I've watched many of your videos over time. You are quite the talented craftsman & artist. I think it's time I subscribed. Thanks for all the great inspirational videos. Wish you the best from here in Canada.
Complimenti. Hai avuto una bella idea. Io avrei tolto e chiuso lo spazio della maniglia della porta posteriore. Avrei chiuso la linea che si vede sempre della porta posteriore. Non sapevo che dalle tue parti le ruote cosi esposte (forse troppo per il codice...) fosse così di moda. 👍👍👍
You did a fantastic job there sir, very very well done 👍 The only thing l wish you had done was remove and shave the redundant rear door handles and welded up the rear door gaps 👍 Best wishes from the north west of England and god bless you and yours 🙏🏻❤ Jay
As always, your work is nothing short of amazing. You put a great deal of hands on engineering into your work, and the level of ability & knowledge is simply priceless. I was hoping the rear doors would have been sealed up to look like a factory ute also, but if it was intended to identify a modified sedan, then i get it 😁well done bro, fantastic job. Here in Australia, unfortunately, it would never pass an engineers modification certificate. There is a big list of structural compliance and requirements that must be met before they even look at the project. But who cares, You're not in Australia 😂
@TinNongTheGioi-ex9es we have a lot of professionally modified cars here in Australia my friend. A lot of awesome engineers here also, and non qualified professionals. Car mods, engine upgrades we are also very passionate about. I just love watching this guy build stuff from scratch on his own. Although I know a lot of this stuff is done behind the scenes, I still love watching it. Makes me want to build more stuff too 😆
Good job Mr ho I weld and fabricate trailers myself and I much appreciate how you do your videos all the process at once as compared to seeing months worth of videos in real time it is better for me to see the entire process in a timelapse version
Прикольный пепелац получился, по дешману пойдёт. Но я бы заварил задние двери, убрал бы задние внутренние арки заменив пружины на торсионы, тогда бы и погрузочный объем бы увеличился. Заменил обычный ручник на электро ручник, тогда бы можно было поставить задний диван в салон вместо двух седений. Для мультимедиа сделал бы подиум и перенёс бы наверх вместо часов.
Тачка металлолом, побыстрому решил продлить ей жизнь не на долго и просмотров срубить за одно, с их влажным климатом она за 5 лет в труху рассыпется после такого "ремонта".
I'd use the trunk lid and the piece of the roof to make a removable tonneau cover for the new bed. also since the bed seems to be water tight you might want to drill one or two small drain holes at the lowest end of it for rain and any spills.
Fantastic transformation and effort :) I just would have added some tie-down points in the back to secure loads safely. Also a drain hole somewhere with all the rain you get :)
Check out Merlin’s Old School Garage channel. He took a Volkswagen Jetta and made a ute. He used a kit. It’s pretty interesting. Here in the states, we don’t see that much. However, I would drive one. Cool looking trucks….
Mong sao luật pháp vn đưa ra quốc hội cho được phép độ chế xe, nhưng phải được các có quan kiểm chứng, mỗi lần độ chế, thay đổi mẫu mã màu sơn....đóng tiền vào cho cơ quan chức năng, như vậy cơ quan nhà nước có thêm nguồn thu chi mà dân lại có xe chơi
I like the conversion a lot! Excellent planning, but I see that the turning is going to be an issue. Also the rear door handles and door gaps could have been filled at one point to where it would look like a factory offering.
@@franksanta-teresa971 also how does he adjust the rear shocks because it appears he fiberglassed over them, they should be covered but made a removable cover for repair
NO D.O.T (Department Of Transportation) regulations we love 3th World Countries.. Just paying for tags once..free rides for ever.. ahhhhhh.. Much love from USA United States of America ahhhhhh
I appreciate the time to retrofit this vehicle and make the video. Yes there are things I would do differently, but well done, keep improving. Blessings from the Caribbean.
I like it alot man your work is amazing! If i might suggest weld that door full so there is no more door line, and remove handel and also make it smooth. That way it would look more like one panel. Its only my personal opinion, but like i said man great work!
Gorgeous! Really enjoyed the yellow color. Even though the black and white "dream" at the beginning showed the design, that yellow was a beautiful surprise when you started painting!
Awesome video my brother from another country. I love the music, the editing style, the slow motion shots like at 24:50. You have a great style. The way you work and dress is very nice. Just a spectacular man. Congradulations on all of your success and happiness. David.
love the work , love the ingenuity . But please anyone watching DO NOT copy this lug nut /spacer design for anything but slow off road use . Extremely dangerous and likely to fail at any moment . Anything over 20mph and this car will start to shake itself to pieces from those lug nut extensions .
My grandpa did basically the same thing to an old four-door sedan he had years ago when I was a kid. The main difference is he left the back doors where they opened. That way he could load stuff from the side without lifting it over if he had to.
Надо было еще в кузове обои поклеить 😁😁😁 а вообще по хорошему, после того как разрезали крышу, оставалось разрезать только пол, ну и выкинуть 😁😁😁 а так конечно парень молодец! Горшки с цветками возить можно 😁😁😁👍🏻👍🏻👍🏻
not downing him in this video and (Imm not good at that stuff ) but the door handsfor the back and the back door outline i would of try to bondo all of it where it look more cooler like it was really made like that but thats cool little truck
If you had the hatch 4 door, or the tailgate from a Corolla FX, you could make a gate to extend the bed into the passenger compartment for larger items. My family had an 84 Corolla back when it was brand new. I had an 88 FX AE88.
для первого раза отличный результат. учитывая то, что всё делалось на глаз, на коленке. вот только как менять задние стойки? хотя, судя по видео с лодками, это пробный вариант. надо ждать продолжение. паренёк неугомонный, респект и уважуха!
Awesome!! Love seeing stuff like this and your really the only one I've seen doing it. Maybe you should update along the way? Just do extra stuff to it and post videos. I know me and a lot of others would love to see it. But great jib man!! I'd drive it and use it all the time !!
Bảo sao kênh toàn người nước ngoài coi. Người nước ngoài họ coi trọng nội dung sáng tạo, sự khéo léo trong kỹ thuật cơ khí làm ra những sản phẩm độc đáo đầy thú vị. Người xem Việt Nam hiện nay đa phần lại là phụ nữ và đám nhóc ác đam mê toàn thứ rác rưởi hèn chi nội dung của kênh này không được đề xuất nhiều! Respect you!Content creator good for life
Chuẩn bạn, nãy tui cũng xem kênh một ông kia cũng v, kênh Việt Nam luôn mà toàn người nước ngoài khen, mấy ông Việt Nam vô chửi xối xả, k hiểu kiểu gì. Đúng nhân tài ở VN k thể sống đc, ra nước ngoài mới phát triển đc @@
Xin chào từ Hà Lan (sử dụng Google dịch, xin lỗi vì điều đó) Thích cách bạn làm điều này mặc dù ở quốc gia của tôi, chiếc xe này sẽ bị cấm lưu thông trên đường công cộng do các vấn đề an toàn nghiêm trọng. Ngoài ra, tôi khuyên bạn nên thay đổi trục sau thành thiết lập bánh xe đôi vì nó sẽ có thể giữ hàng hóa của bạn tốt hơn. Ngoài ra, hãy thay đổi bánh trước trở lại như bình thường để tăng thêm độ bền. Một chi tiết nhỏ mà bạn có thể muốn thêm là một tấm lưới rất đơn giản ở phía sau cùng để đảm bảo không có gì có thể lăn ra khỏi sàn tải mới của bạn. Có lẽ hãy thêm một số móc để bạn có thể cố định hàng hóa của mình theo cách đó (bằng dây thừng hoặc thứ gì đó tương tự) Đối với nội thất, những bộ phận đó có thể cần được vệ sinh kỹ lưỡng vì nó làm mất đi vẻ đẹp của những gì bạn đã tạo ra. Rõ ràng là đáng tiếc vì nó thực sự trông giống như một chiếc xe thực sự đẹp. Hãy tiếp tục phát video! Tôi thích xem những video này!
I really like the way it came out, just be aware that running your wheels like that puts a lot more stress on your wheel bearings as well as some differences in handling.
@@nostreamavailable9090 or weld two rims together, have you seen the guy from russia building the cyper punk car, you should check that out its pretty cool.
so much effort and you bypass doing things that directly impact the serviceability and safety of the car the rocker panel is a structural point on these and you did not replace the missing one and left a crap ton of rust holes in the floor by the pedals and put filler directly over rust with no conversion or removal of the rust, unfortunately, this is going to be falling apart faster than it took you to build it also how are you going to change struts in the rear as well as tail lights. I really like the idea and it is fun but I wish you had put more thought into the longevity and safety of the vehicle. Also, flip your wheels back around not only is that unsafe it does not look good.
I think he cut too many corners here compared with his previous video where he restored an engine from the bottom of the ocean. Things he can work on are.. 1) restore the engine bay 2) install a back up light 3) roll out the fenders to cover the wheels 4) cover up the rear door handles 5) lift the front of the car 6) clean the suspension parts.
It's a Toyota? It has at least another 100,000 miles worth left in it as long as you stay ahead of the rust! Nice job on the conversion. Can't imagine doing all of that with a stick welder and dark sunglasses.
Me Encanto La Conversion Que El Muchacho Le Hizo A Ese Corolla En Una Pick Up Ojala Que En Venezuela Se Lograra Eso Pero Se Podria Arruinar Todo Un Clasico
Аплодирую стоя! Красавчик!🎉🎉🎉уникальный молодой человек, знает авто как пять пальцев, от электрики до кузовщины.
Но делает ×уйню
Chỉ vì chở 1 cái chậu cây mà mất bao công sức và tâm huyết làm nên chiếc xe, khâm phục bác tự làm từ A-Z mọi công đoạn. Thuần thục các kỹ năng
Một trong những kênh UA-cam đáng xem nhất Vn nhưng hầu hết khán giả đều là người nước ngoài vì sao? Vì nước ngoài thích tài năng khoa học kỹ thuật sáng tạo chứ không phải những cái vô bổ câu like câu view
Vì người nước ngoại ko có thợ lặt vặt như vn.
Bên mỹ làm gì cũng phải có bằng.
Ko như VN.
Lên họ ko biết sửa chữa lên thíc xem video này.
Vn thì đầy việc bạn thíc học sửa chữa oto miễn phí cũng có
Ijlv9087😊😊😅😮😮😮😢😢0😢😢😮😅😊
4ty ff 😮😅
Kjjk7980
❤is 🎉❤🎉6 😢ri
1) как заменить в случае дтп задние фонари
2) как заменить в случае неисправности задние стойки
3) ручку задней двери можно было заварить, и зашпаклевать
4) зазоры на задней двери можно было сделать тоже самое что и с ручками
5) развернуть колеса и установить странное решение
Есть много недочетов я так понимаю авто было сделанно только для контента. Но многие и такое не смогут сделать.
Зделано на отьебись,таким мастерством многие азиаты в ютубе страдают ,вечно по верх ржавчины красят
Согласен полностью, хотя бы разварки сделал, а не это убожество, видос чисто просмотры срубить
Он сделал для себя и как ему захотелось + на коленке грубо говоря. У него хотя бы инструмента дофига@@lexdrive3127
Ещё и внутри арок дыры от коррозии оставил сквозные😁
@@lexdrive3127 а ты Вася что сделал? На СТО 2/2 работаешь?
I am just in awe of the skill this man has.. Eventho it’s not all flawless, he did convert and “rebuild” a whole car, just to be able to relocate his plant.. 😅 you have to be able to pull it all of in the end !! Awesome build❤❤
Excelente trabajo mi buen amigo,mucho éxito en todo, saludos desde México
That reminds me of earlier in the 70s, when we welded rusty cars like this back together in Germany... but we had to go to the technical inspection with it... installing the rims the wrong way would have been an absolute absurdity... even though the colleague acted very brutally, but still he deserves a medal for welding with electrodes...all respect! 🥇🏆... we used acetylene and oxygen for welding, until the mig mag or the wire welders came up. he did a lot of work, disassembled everything... he could have worked a little nicer... but he's still a talent👌😎
amazing indeed :) well done
You are very polite. I respect the time Mr.Hô engaged into this conversion/restoration BUT it is not a proper work. In the mad Europe, the German TÜV would NEVER APPROVE this car. To me the worst about this car is the suppresion of structure bars in the trunks.
I've allways thought the german police was very strict about vehicle condition. This sounds like a sci-fi to me
@@alexandrhrouz666 Early in the 70's doesn't mean "today". Nowadays, it is not about the police but about the official check to allow your car on the roads.
@@alexandrhrouz666how did WV car pass the emission tests ? Lol
Nice idea 👍
Shame the rear towers didn't get reinforced, and then get completely covered with fibreglass!
Lots of issues, with body, suspension, steering, even those rear lights are half done...
Nice idea, just a bit rushed.
Don’t you recognize that all tool and equipment he have is : grinder , welder , antique hammer , and some very basis tool ? The point is he did an amazing job with what ever he has on hand which nothing .
Nếu cho bạn sử dụng những thứ đơn giản làm,bạn có thể làm nên tất cả nhu anh ấy?
Ilke very good VDO 🙏🤠💞 happy New year ♥️♥️♥️
Xe ô tô bán tải màu sắc đẹp, nhìn thật hấp dẫn và rất tiện lợi, rất thích!
awesome build, though i hope for matinence sake those fiberglass caps can ber removed to change out the rear struts.
Muy lindo su corollita el que tiene un Toyota sabe lo que tiene desde costa rica 🇨🇷 saludos amigo
คุณเก่งมากๆซ่อมเป็นทุกอย่าง👏👏
#จากไทยแลนด์
Ok Mr. Ho this one is wild! Really Cool great job! LoL I'm so busy myself, I'm actually watching two of your shows right now at the same time trying to catch up😂🤣😂🤣😂 keep building my friend!
He doesn't post often , but when he does you know something cool is gonna happen
công Nhận a chế suy nghĩ siêu quá ,, đi làm lại chiếc xe để chở cái cây thôi .. độc nhất luôn hi tuyệt vời
Great job, terrific idea Mr. HO! Thanks for taking the time to make a video of your creation.
Thanks!
El Corolla Avila Uno De Esos Carros Que En Mi Pais Venezuela Son Un Patrimonio Rodante Estos Son Confiables,Divertidos,Faciles De Manejar Y Reparar Y Seguros Hoy En Dia Estos Autos Son Unos Clasicos Rodantes Que Aun Siguen Circulando Y Dando Batalla
Lo felicitoo amigo.le kdo super bonitaa asu gustoo bien echaa felicidades esta 💯💯💯👍👍👍👍👍👍👍💯💯💯💯👋👋👋👋saludos d🇺🇲 soy dl salvador..🇸🇻👋👋👍👍👍
Very Goody!! Sao paulo Brazil!!
Mr Ho you did it again beautiful work and a great imagination. Thank you for your time and I'll be waiting for the next video keep it up and God bless you sir.
This is pretty amazing. And I say this as someone who worked around body shops selling PB&E for years. I've seen a few conversions of this type done, and the only thing I can say that I would do differently would be a little stronger material at the top of the rear shock/strut towers and a heavier box system to tie the two upper rear towers together (probably a u shaped box to go under the rear window, with a couple of pillars down to the floor "frame"). Without it, I see some flex issues on the body/chassis, but overall it's amazing.
I see some rust I would have cut out replaced as well to make it structurally stronger, but overall, I get the "where do I stop" question on an old beater like this...
Also, MAD PROPS for using the stick welder on your sheet metal!
In places like Asia no one there has much money but they have sometime some tools and are afraid to take on job like this
That is all you would do differently? Running those wheels backwards on cut up lug nuts is crazy. The strut towers yes need a heavier gauge material and bracing. The rear door latches were removed and not shown to go back in. Welding and filling in the rear door handles and rear door seam needed to be done as well to finish off the strength of cutting the rear structure completely out. Re bracing of the rear deck to the back of the car needed to be redone or kept in place.
He did a amazing job on it but should
Got rid back handle and tail gate on it
From the trunk cut it make it fit car look
Good Like that
Welding sheet metal with a stick welder isn't easy.
It looks great, however, I am concerned about the rear shock towers not being strong enough.
How do you plan to get at the mounting nuts now that they are covered with fiberglass?
These builds are like Bic lighters, when it wears out you throw them away.
Angle grinder, inspection, more fibreglass... The whole build only took half an hour...! : )
У чувака есть плазменный резак, но нет полуавтомата?! 😂
Lột cái sàn ra nhìn chán luôn, nhưng bác vẫn làm từng tí một, thật nể quá! Không phải nể vì kỹ năng mà nể nhất là sự kiên nhẫn vô cùng! Respect!
Well done and thank you for sharing! 😀 Mark from Australia!
I've watched many of your videos over time. You are quite the talented craftsman & artist. I think it's time I subscribed. Thanks for all the great inspirational videos. Wish you the best from here in Canada.
80系カローラ。もう30年以上前の車なのにきちんと整備すればまだ動く。というトヨタ車の耐久性の高さに加えてそれを配送車として活用してしまう動画作成者の手腕に感動しました。
テールが８６みたい
Complimenti. Hai avuto una bella idea. Io avrei tolto e chiuso lo spazio della maniglia della porta posteriore. Avrei chiuso la linea che si vede sempre della porta posteriore. Non sapevo che dalle tue parti le ruote cosi esposte (forse troppo per il codice...) fosse così di moda. 👍👍👍
1984 Corolla SE. my first car in 1994. Man the memories.
Hay que nreconocer que es un jenio
Beautiful work on the car transform into pickup.
This is so cool i have a Toyota Camry wagon converted into a panel Van hearse well done 👍 cheers Stephen 🍀🤠
You did a fantastic job there sir, very very well done 👍
The only thing l wish you had done was remove and shave the redundant rear door handles and welded up the rear door gaps 👍
Best wishes from the north west of England and god bless you and yours 🙏🏻❤
Jay
I am mad that he did not clean the rest
@@Petroleum-lover I’m not mad , but I do think he should have gone all the way
This is amazing! For using what you have you really transformed that 4 door Toyota into something that reminds me of a Subaru Brat. 👏
Очень похоже 😂
I was thinking the same as soon as he pulled that rear window forward and started attaching it.
Absolutely gorgeous and super practical, I truly am impressed.
Thank you for posting this great job!
As always, your work is nothing short of amazing. You put a great deal of hands on engineering into your work, and the level of ability & knowledge is simply priceless.
I was hoping the rear doors would have been sealed up to look like a factory ute also, but if it was intended to identify a modified sedan, then i get it 😁well done bro, fantastic job.
Here in Australia, unfortunately, it would never pass an engineers modification certificate. There is a big list of structural compliance and requirements that must be met before they even look at the project. But who cares, You're not in Australia 😂
Yeah, fuck the gov regulators. Health and safety? They can kiss my ass.
if you want him pass for cetificate in australia, he can do it...
@TinNongTheGioi-ex9es we have a lot of professionally modified cars here in Australia my friend. A lot of awesome engineers here also, and non qualified professionals. Car mods, engine upgrades we are also very passionate about. I just love watching this guy build stuff from scratch on his own. Although I know a lot of this stuff is done behind the scenes, I still love watching it. Makes me want to build more stuff too 😆
I'm really injoy watching you amazing your my idol.👋👋👋👋
Good job Mr ho I weld and fabricate trailers myself and I much appreciate how you do your videos all the process at once as compared to seeing months worth of videos in real time it is better for me to see the entire process in a timelapse version
Một mình mà cải tạo chiếc xe hơi củ nát thành một chiếc bán tải thật ngon lành, đúng là thánh....❤❤
Mr HỒ Thánh Chế this super crazy but as well super cool!! Great job as always!!
Muy buen trabajo le hubieras tapado la manija y la union del pedeso de la puerta trasera de hay quedo muy bien 👍🏻
Прикольный пепелац получился, по дешману пойдёт. Но я бы заварил задние двери, убрал бы задние внутренние арки заменив пружины на торсионы, тогда бы и погрузочный объем бы увеличился. Заменил обычный ручник на электро ручник, тогда бы можно было поставить задний диван в салон вместо двух седений. Для мультимедиа сделал бы подиум и перенёс бы наверх вместо часов.
@contactmeonnicegramdiybyja2278 what is it nisegram?
em nghĩ anh bỏ tất cả máy móc ra rửa sạch sẽ và sơn lại cả máy móc bị rỉ sét bên trong thì video này sẽ hay hơn ạ
Пару вопросов: зачем такой большой вылет колес, и, было бы неплохо дренажное отверстие в кузове на случай дождя. А вообще Супер! Успехов!
А ещё не мешало бы зачистить ржавые места
Тачка металлолом, побыстрому решил продлить ей жизнь не на долго и просмотров срубить за одно, с их влажным климатом она за 5 лет в труху рассыпется после такого "ремонта".
Impresionante trabajo. Felicitaciones campeón un saludo desde Argentina 👏👏👏👍👍👍
Someone please send this man a welding helmet!
I'll try to contact him.
And a proper paint mask xD
@TyBraek, he also needs welding gloves.
Mr Ho deserves his own show on Motor Trend TV.
@@pauldrusch1805 today on motor trend tv Vietnam edition Ho here is gonna turn this clapped out 88 corolla into a pickup truck.
Why leave the rear door handles & the rear door line ?? 👍👍🇬🇧🇬🇧
I'd use the trunk lid and the piece of the roof to make a removable tonneau cover for the new bed.
also since the bed seems to be water tight you might want to drill one or two small drain holes at the lowest end of it for rain and any spills.
Fantastic transformation and effort :) I just would have added some tie-down points in the back to secure loads safely. Also a drain hole somewhere with all the rain you get :)
Você é muito inteligente 👏👏👏
Seus vídeos de conserto e restauração são ótimos e muito inspirador 👏
Desde Portugal 🇵🇹. Ola.. Bon. Traballo. Gostei. Do. Vidéo. Obrigado pour. Vidéo.
Very good mate 👍
In Australia we call that car type a ute and it's common here, like a mini truck
This is basically a brumby
@@tbagindustries4331 yeah totally 👍
Check out Merlin’s Old School Garage channel. He took a Volkswagen Jetta and made a ute. He used a kit. It’s pretty interesting. Here in the states, we don’t see that much. However, I would drive one. Cool looking trucks….
Mong sao luật pháp vn đưa ra quốc hội cho được phép độ chế xe, nhưng phải được các có quan kiểm chứng, mỗi lần độ chế, thay đổi mẫu mã màu sơn....đóng tiền vào cho cơ quan chức năng, như vậy cơ quan nhà nước có thêm nguồn thu chi mà dân lại có xe chơi
Vietnam is left-hand-drive ?
I like the conversion a lot! Excellent planning, but I see that the turning is going to be an issue. Also the rear door handles and door gaps could have been filled at one point to where it would look like a factory offering.
I thought the very same thing. Also he did not make any provisions for drain holes for the bed in the event of rain...
yeh i would have welded them up
@@franksanta-teresa971 also how does he adjust the rear shocks because it appears he fiberglassed over them, they should be covered but made a removable cover for repair
NO D.O.T (Department Of Transportation) regulations we love 3th World Countries.. Just paying for tags once..free rides for ever.. ahhhhhh.. Much love from USA United States of America ahhhhhh
I like the fact he left the handles and gaps! if he filled them in, who would have looked twice thinking its just another mini truck..
I appreciate the time to retrofit this vehicle and make the video. Yes there are things I would do differently, but well done, keep improving. Blessings from the Caribbean.
I like it alot man your work is amazing! If i might suggest weld that door full so there is no more door line, and remove handel and also make it smooth. That way it would look more like one panel. Its only my personal opinion, but like i said man great work!
Rất hy ay chúc sức khỏe nhé bạn
Gorgeous! Really enjoyed the yellow color. Even though the black and white "dream" at the beginning showed the design, that yellow was a beautiful surprise when you started painting!
Awesome video my brother from another country. I love the music, the editing style, the slow motion shots like at 24:50. You have a great style. The way you work and dress is very nice. Just a spectacular man. Congradulations on all of your success and happiness.
David.
That thing is So sweet by the way. Bravo, Bravo
Excellent effort , using what you have , keeping cost down and very inexpensive , viewing from Detroit Michigan USA 🇺🇸 .
Looks great except for the wheels. You have to turn them back around or get new ones.
Yeah, not much turning radius with the tires hitting the fenders?
Very cool build, you have some severe dedication. Great job!
love the work , love the ingenuity . But please anyone watching DO NOT copy this lug nut /spacer design for anything but slow off road use . Extremely dangerous and likely to fail at any moment . Anything over 20mph and this car will start to shake itself to pieces from those lug nut extensions .
My grandpa did basically the same thing to an old four-door sedan he had years ago when I was a kid. The main difference is he left the back doors where they opened. That way he could load stuff from the side without lifting it over if he had to.
Smart man
Photos would be cool,
There was a guy in Virginia who did this to a Cadillac.
Надо было еще в кузове обои поклеить 😁😁😁 а вообще по хорошему, после того как разрезали крышу, оставалось разрезать только пол, ну и выкинуть 😁😁😁 а так конечно парень молодец! Горшки с цветками возить можно 😁😁😁👍🏻👍🏻👍🏻
Is there anything this guy can't do? Really admire your ingenuity.
Decent welds
يا ايها الذين آمنو لا تلهكم اموالكم ولا اولادكم عن ذكر الله ومن يفعل ذالك فاولئك هم الخاسرون......
سبحان الله وبحمده سبحان الله العظيم. الباقيات الصالحات وللذكر الله اكبر.......
not downing him in this video and (Imm not good at that stuff ) but the door handsfor the back and the back door outline i would of try to bondo all of it where it look more cooler like it was really made like that but thats cool little truck
Can i know what this model
If you had the hatch 4 door, or the tailgate from a Corolla FX, you could make a gate to extend the bed into the passenger compartment for larger items. My family had an 84 Corolla back when it was brand new. I had an 88 FX AE88.
для первого раза отличный результат. учитывая то, что всё делалось на глаз, на коленке. вот только как менять задние стойки?
хотя, судя по видео с лодками, это пробный вариант. надо ждать продолжение. паренёк неугомонный, респект и уважуха!
Он какой отморозок, просто в шоке с него😂
Awesome!! Love seeing stuff like this and your really the only one I've seen doing it. Maybe you should update along the way? Just do extra stuff to it and post videos. I know me and a lot of others would love to see it. But great jib man!! I'd drive it and use it all the time !!
You made the BEST version that car has ever seen. AMAZINGLY practical and badass.
Bảo sao kênh toàn người nước ngoài coi. Người nước ngoài họ coi trọng nội dung sáng tạo, sự khéo léo trong kỹ thuật cơ khí làm ra những sản phẩm độc đáo đầy thú vị. Người xem Việt Nam hiện nay đa phần lại là phụ nữ và đám nhóc ác đam mê toàn thứ rác rưởi hèn chi nội dung của kênh này không được đề xuất nhiều! Respect you!Content creator good for life
Chúng tôi đánh giá rất cao! Cảm ơn bạn!
Chuẩn bạn, nãy tui cũng xem kênh một ông kia cũng v, kênh Việt Nam luôn mà toàn người nước ngoài khen, mấy ông Việt Nam vô chửi xối xả, k hiểu kiểu gì. Đúng nhân tài ở VN k thể sống đc, ra nước ngoài mới phát triển đc @@
That is a1985 Toyota, had one new in 1985 nice to see it lasted this long! Nice job!
Талантливый человек! Хорошая прокачка 🎉
Excelente trabajo saludos desde Honduras
The biggest achievement in my mind is taking all of that apart, especially the dash, and putting it back together.
Получилось отлично но я бы добавил фендера на все криля потому что ни красиво выглядеть колеса
Damn, your creations are always magical, a joy to watch!
Xin chào từ Hà Lan (sử dụng Google dịch, xin lỗi vì điều đó)
Thích cách bạn làm điều này mặc dù ở quốc gia của tôi, chiếc xe này sẽ bị cấm lưu thông trên đường công cộng do các vấn đề an toàn nghiêm trọng.
Ngoài ra, tôi khuyên bạn nên thay đổi trục sau thành thiết lập bánh xe đôi vì nó sẽ có thể giữ hàng hóa của bạn tốt hơn. Ngoài ra, hãy thay đổi bánh trước trở lại như bình thường để tăng thêm độ bền.
Một chi tiết nhỏ mà bạn có thể muốn thêm là một tấm lưới rất đơn giản ở phía sau cùng để đảm bảo không có gì có thể lăn ra khỏi sàn tải mới của bạn. Có lẽ hãy thêm một số móc để bạn có thể cố định hàng hóa của mình theo cách đó (bằng dây thừng hoặc thứ gì đó tương tự)
Đối với nội thất, những bộ phận đó có thể cần được vệ sinh kỹ lưỡng vì nó làm mất đi vẻ đẹp của những gì bạn đã tạo ra. Rõ ràng là đáng tiếc vì nó thực sự trông giống như một chiếc xe thực sự đẹp.
Hãy tiếp tục phát video! Tôi thích xem những video này!
I really like the way it came out, just be aware that running your wheels like that puts a lot more stress on your wheel bearings as well as some differences in handling.
A LOT more i'd say. still, it should work, esp if its not daily driver on long distances ;)
He should widen the front wheel wells so he doesn't have the tires stop when turning
I wonder if he could lengthen the wheel studs and run twin rears like a dually?
Looks a bit like a Subaru brat with that raked stance
Very cool 😎👍
@@nostreamavailable9090 or weld two rims together, have you seen the guy from russia building the cyper punk car, you should check that out its pretty cool.
Excellent very good work, please wear proper eye protection when welding so than you become older you can still see
Should have removed the rear door handles and filled it in as well as the space around the rear door and it would be perfect :)
so much effort and you bypass doing things that directly impact the serviceability and safety of the car the rocker panel is a structural point on these and you did not replace the missing one and left a crap ton of rust holes in the floor by the pedals and put filler directly over rust with no conversion or removal of the rust, unfortunately, this is going to be falling apart faster than it took you to build it also how are you going to change struts in the rear as well as tail lights. I really like the idea and it is fun but I wish you had put more thought into the longevity and safety of the vehicle. Also, flip your wheels back around not only is that unsafe it does not look good.
I think he cut too many corners here compared with his previous video where he restored an engine from the bottom of the ocean.
Things he can work on are..
1) restore the engine bay
2) install a back up light
3) roll out the fenders to cover the wheels
4) cover up the rear door handles
5) lift the front of the car
6) clean the suspension parts.
tuyệt quá anh, chỉ tiếc là mấy chiếc xe độ chế không được phép đăng kiểm lưu hành ở Việt Nam
I am a little worried for the rot and the rear coil mounts, but seeing as they are fiberglassed over, it may be fine for a while
until you want to replace those struts
Muy buen trabajo amigo,excelente
I didn't want one of these until now. Go Mr. Ho!
It's a Toyota? It has at least another 100,000 miles worth left in it as long as you stay ahead of the rust! Nice job on the conversion. Can't imagine doing all of that with a stick welder and dark sunglasses.
What I see: a spinoff Subaru Brat but with a DNA of Toyota
"Mom, can we have a Hilux?"
'We have a Hilux at home..."
Well done, Mr. Ho.
you should reallly put a guard on your grinder. that being said, you did amazing work. nice build but your brake lights do not seem to be working
Việt nam mình có quá nhiều nhân tài…..
Quá ngưỡng mộ anh quá giỏi❤❤❤
Cai gì cũng lam dc
Thấy bạn💪🇷🇺
Me Encanto La Conversion Que El Muchacho Le Hizo A Ese Corolla En Una Pick Up Ojala Que En Venezuela Se Lograra Eso Pero Se Podria Arruinar Todo Un Clasico
Nice job !!! 👍
In Italy isn’t possible bild or modify a car easily like this...there’re a lot of burocratic problem... 😡
Very nice work but the wheels with narrow tires goes not look good . With wider tires it would be much better.