[Webinar] Making Clear Aligners Using the 3Shape Ortho System Module with Brandon Smith, CDT

Clear Aligners can be a very profitable business and they are now yours for the making. This webinar will go over the process of using the 3Shape Ortho System Software to create tooth movements for the purpose of making clear aligners.
This webinar will go over the process of:
- preparing the models by making them “watertight”
- setting up the scans to make the movements
- the tools used for making the movements
- outputting the models in each of the different stages for making vacuum forms

[@waltao321]

The software offers some attachment options, which can be customized with regard to tilt, size, etc. There is also the possibility of creating specific STLs for the attachment that will be useful to you (in other CAD software), which can be imported into the Orthosystem.

[@melifuks331]

hi! My name is Melina. Im from Argentina. could you tell me more about the attachments and the program that you use to make them? thanks

[@chih-fanglee2126]

Hi! Great tutorial and very helpful! I was troubled by missing tooth which is planned to have implant later. How do I create a "tooth-shape" substitute at the missing site, to avoid difficult undercut for aligner fabrication?

[@alvarolopezaza6710]

How many attachments are ready for improve the movements on the software?thanks

[@wzk921109]

It would be great for 3 shape to make this work, we really need a good library of attachments that’ll be able to automatically generated without spending way to much time trying to design them individually.

[@Francofoo]

may i ask is it possible to block undercut on the model automatically ? for clear aligner better fitting

[@WhipMixCorporation]

We do not believe there is an option for that as the aligners will need to engage in the undercuts.

[@vananhnhakhoa1876]

thanks

[@qscan-be4vw]

Hello, a question, when I go to adjust the teeth, there is no option where I automatically adjust the teeth so that they are straight and not manually.

[@zubairsharif1356]

is it possible to add overcorrection by adding one or two extra subsetups at the end?

[@brycehiller]

You can do this by either copying a substep as a new setup, or by using the staging and timelines feature.

[@zubairsharif1356]

@@brycehiller thankyou
One more thing if i block the movement of one tooth in staging and timeline it will increase the movement of that specific tooth on rest of aligners thats not good
How you mange such cases

[@zubairsharif1356]

@@brycehiller is it possible to export jpeg of before and after?

[@trunghaugs]

Thank you so much. Could I ask some questions? (1) How to set up Expand Arch curve automatic? (2) If I want to add attachment (like invisalign), how can I do?

[@WhipMixCorporation]

Hi TrungHau. Thanks for watching. (1) Can you clarify what you are looking to do? There's no way to automatically move the teeth that we are aware of.
(2) There is a tool in the aligner studio called attachments that allows you to add attachments. We recommend contacting your reseller for training on how to use this. If we are your reseller, please email us at [e-mail].

[@digilab7317]

bác ở đâu ?

[@birbirikos1]

Are there any cources available on the internet or in Europe to attend to and get certified on making clear aligners as a dental technician? Thanks

[@WhipMixCorporation]

We offer some additional training in clear aligners, but it does not certify you. Those trainings can be found here: whipmix.com/dentistry-training/
For more information related to 3Shape, we would also recommend checking out the 3Shape academy here: www.3shape.com/en/academy

[@shareefmahrous7350]

Hello how can I subdivide my setups
For example i do malocclusion for upper and lower and it gives me 10 stages for the final setup
How can I subdivide them like in need 8 for upper and 10 for lower ?

[@26243937]

Is there a big difference between this version workflow and the present version workflow?

[@WhipMixCorporation]

The workflows are very similar once you get into the actual workflow. Most of the changes had to do with case creation and management. But once you are in the actual workflows they are very similar to previous versions of the software.

[@hectorllamosas9576]

Hi!! How can i get the ct scan? I only have the STL scans... Thanks

[@WhipMixCorporation]

Hi Hector. The CT scan has to come from the doctor. The doctor must have a cone beam imaging scanner and send it to the laboratory.

[@hectorllamosas9576]

@@WhipMixCorporation Thanks, I have another difference between your video and my work. My models don't appear directly in the occlusion position when I import them into the program. How can I fix that ??

[@brycehiller]

@@hectorllamosas9576 Hi Hector, the solution depends on how your scans were taken. If the scans came from an intraoral scanner, and the bite is off, the bite needs to be corrected in the intraoral scanning software. If you scanned in stone casts, you will simply need to re-scan the occlusion with the correct bite.

[@andriinazarchuk]

how to determine how long to wear each liner?

[@WhipMixCorporation]

This is entirely up to the doctor and their treatment planning.

[@danieltanguay7875]

do we absolutely need the CBTC scan? or we can work with the stl's only?

[@WhipMixCorporation]

You can work with STL scans only. You do not need the CBCT, but it would be ideal to help locate root information.

[@LukeTeel]

So how to I go about paying someone do this process for me, I'm doing some of my own dental treatment.

[@WhipMixCorporation]

Depends on what kind of treatment you are looking to do. There are design services that will do this work, but this is a small piece of the digital dentistry process. If you are looking solely for design, Evident Designs is a good place to start.

[@marioortizgonzalez8607]

Do you still need help?

[@cardeodonto]

why in the import stl ERROR format pixel arb?

[@WhipMixCorporation]

Hi Amilkar. Can you please clarify your question so we can assist you. Are you getting an error when importing stl files?

[@torskysweeper]

@@WhipMixCorporation Hi, I get the same error. Its says that stl should have arb pixel format. Had the error both with trios scans and models prepared in model builder. Can you help me, please?

[@WhipMixCorporation]

@@torskysweeper If we are your reseller with 3Shape, please contact us at [e-mail] and our technical support team will walk through fixing this with you. If we are not your reseller, you will need to contact your reseller or 3Shape directly for an answer.

[@zubairsharif1356]

Hi guys is it possible to export files for web viewer e.g OBJ,PLY??

[@WhipMixCorporation]

The only two formats that you can export those aligner models as is either STL or DCM. There are other 3rd party softwares out there that can export files in different formats, however we don't have a recommendation for you. We recommend that you reach out to those 3rd party companies to find out what their software can do.

[@edgardoraulborraccetti5016]

hello, is there a tutorial in spanish of orthoanalyzer

[@WhipMixCorporation]

We unfortunately do not offer 3Shape training in Spanish. Please reach out to 3Shape directly for assistance.

[@efd272]

How much is 3shape clear aligner software & equipment?

[@WhipMixCorporation]

This is going to depend on which software package you choose and which equipment is required for your particular setup. If you are in the United States, you can email [e-mail] and a rep will reach out to discuss your options. If you are outside the United States, you will need to contact your local reseller for this information.

[@digilab7317]

I'm selling a 3shape software dongle, it doesn't need to pay annual fee