I did a burn out and engine light came on. I did the other recommendations and light was still on. Had to buy the obdII and adapter. worked like a charm!
Thank u for this video recently bought a 2016 R1M from copart. Dealer wouldn’t clear my codes with them trying to replace wire harness 😂. When everything workin fine tell I was working on bike & got same code you did. Dealerships just want money now they won’t get any 😂
dont do them. tires are too expensive lol... im guessing you have to turn off all the extras ( slide control, traction control, abs) it faults the wheel sensor because the front wheel isn't moving.
Mate i have the 2016 r 1 m silver. But j see you have a carbon fiber fairing on top of the tank Is this part of the stock 2017 or did you add it? Even the dirt tail protector is in carbon fiber
all the Carbon i added to this bike... the r1m the only difference is factory carbon electronic suspension. an the gps feature for track if u added it. i have alot more carbon. i will make a video soon... my bike covered i dust right now with no wheels lols.
Just got my obd 2 on eBay. I have a 2018 R1 it’s on my videos. My check engine light came on after driving her. Also my R1 won’t start after being off for about 5 days. Bought new Shori Battery and bike only had 1,200 miles. I bought it brand spanking new with 1 mile on the odometer......???
I got a left over 2017 in 2018. So it had no miles when i bought mine, still has the original battery @ almost 6000 miles.. Very odd that it wouldn't start only after 5 days, an check engine already?? U might have a charging issue im not sure. Bike is too new to be having any issues. I doubt u needed a new battery... Did u try charging the battery before replacing it?
jay yes I did but I connected a radar detector not sure if it did something?? But I just took it off the positive and negative completely. Bikemaster connection for positive and negative.
@@JoseRodriguez-mp1bl that could have possibly drained the battery if it stayed on, or a common mistake turning key all the way past the lock which leaves the lights on...., but u should not need a new battery at all. Did u get to see what the check engine says yet?
Great video man. I got this light on after i low sided yesterday. I picked up the bike with the engine and wheel still running. Do you think i have the same issue here since the rear wheel was still spinning after the crash? Thank you in advanced for your reply man.
Most likely. Theres speed sensors on the wheels. So if only one wheel is moving the ecu thinks that a sensor is bad. But u need the obd2 an adapter to clear it. I heard the earlier r1 u can clear it diag menu. But mine 17 an up u need the computer. And the f'n dealer will want to charge u 100. And most likely will not just clear it, they will tell u its bad and charge you to replace it. Once u get the bike running read the code, take note of it, and clear it. See if it comes back before you do anything.
Thanks for this video!! I had an error code pop up on 2018 YZF-R1 and didn't want to take back to the dealer. There's also a cable you can make yourself for modifying the ECU if you're interested. I'll be pursuing this soon. www.r1-forum.com/forums/46-how-tos/572674-how-diy-yec-interface-cable.html
Just got mine, check engine light off! Installed block off plates on my 2018 R1. Thanks again brother u saved me a lot of time, money and headaches!
Legend! My MT10 threw a code after cleaning the chain yesterday, too. Thanks for the video!
I did a burn out and engine light came on. I did the other recommendations and light was still on. Had to buy the obdII and adapter. worked like a charm!
Raul Martinez Damn that would have scared the shit out of me lol!!!
Just happened to me this afternoon. I am buying one just to reset codes.
Had a chuckle reading this 😂
Thank u for this video recently bought a 2016 R1M from copart. Dealer wouldn’t clear my codes with them trying to replace wire harness 😂. When everything workin fine tell I was working on bike & got same code you did. Dealerships just want money now they won’t get any 😂
You saved $100+, thanks!!
About to buy that tool. Appreciate the video greatly!
came on through the exhaust and it won't let me enter the configuration setup, do I have to reset it then?
Si te marcaba la velocidad con ese sensor dañado ??
Can you link Amazon products?
You the man
Youre using an MS 309 Model, but you posted the MS 300 model on Ebay.. does it do the same as the 309? Just making sure..
Thanks for the video. where did you get those Carbon pieces ?
Most of them are carbon tech, they have the best quality carbon. Carbon tech also has an ebay store
Thanks for the video.🏆 quick question how do I do burnouts without the check engine light coming on?
dont do them. tires are too expensive lol...
im guessing you have to turn off all the extras ( slide control, traction control, abs)
it faults the wheel sensor because the front wheel isn't moving.
When your check engine light came on, did the display freeze? Or SC warning light come on?
Display didn't freeze... Don't remember if the slide control came on... U would need this to diagnose / clear anyway to see whats goin on...
Mate i have the 2016 r 1 m silver. But j see you have a carbon fiber fairing on top of the tank
Is this part of the stock 2017 or did you add it? Even the dirt tail protector is in carbon fiber
all the Carbon i added to this bike... the r1m the only difference is factory carbon electronic suspension. an the gps feature for track if u added it. i have alot more carbon. i will make a video soon... my bike covered i dust right now with no wheels lols.
@@jay46s i just git mine 2day. What exhaust do you suggest?
Hello mate
How can I find this OBD with the adapter ?
Thnx
i got it on ebay... search yamaha 4 pin obd adapter for like 30 bux
they are bought separately
Brill thank you
Just got my obd 2 on eBay. I have a 2018 R1 it’s on my videos. My check engine light came on after driving her. Also my R1 won’t start after being off for about 5 days. Bought new Shori Battery and bike only had 1,200 miles. I bought it brand spanking new with 1 mile on the odometer......???
I got a left over 2017 in 2018. So it had no miles when i bought mine, still has the original battery @ almost 6000 miles.. Very odd that it wouldn't start only after 5 days, an check engine already?? U might have a charging issue im not sure. Bike is too new to be having any issues. I doubt u needed a new battery... Did u try charging the battery before replacing it?
jay yes I did but I connected a radar detector not sure if it did something?? But I just took it off the positive and negative completely. Bikemaster connection for positive and negative.
@@JoseRodriguez-mp1bl that could have possibly drained the battery if it stayed on, or a common mistake turning key all the way past the lock which leaves the lights on...., but u should not need a new battery at all. Did u get to see what the check engine says yet?
jay no my obd 2 just passed through customs. Should have by Friday.
@@JoseRodriguez-mp1bl you got the adapter as well? Its not just the obd2 u need. Theres an adapter u need to plug it into the bike
Great video man. I got this light on after i low sided yesterday. I picked up the bike with the engine and wheel still running. Do you think i have the same issue here since the rear wheel was still spinning after the crash? Thank you in advanced for your reply man.
Most likely. Theres speed sensors on the wheels. So if only one wheel is moving the ecu thinks that a sensor is bad. But u need the obd2 an adapter to clear it. I heard the earlier r1 u can clear it diag menu. But mine 17 an up u need the computer. And the f'n dealer will want to charge u 100. And most likely will not just clear it, they will tell u its bad and charge you to replace it. Once u get the bike running read the code, take note of it, and clear it. See if it comes back before you do anything.
jay
Thank you for replying. I got the 2019 model. I will try it with obd2. If i get my hands on it out here. Dealers are ripoffs.
www.ebay.com/i/323904817276?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=323904817276&targetid=884696696281&device=m&mktype=pla&googleloc=9001990&poi=&campaignid=9338045642&mkgroupid=94993827059&rlsatarget=pla-884696696281&abcId=1139336&merchantid=6296724&gclid=Cj0KCQjwmdzzBRC7ARIsANdqRRlvVTIzhnf3VsEsIj9l0gI0pHSQIXVMkN2i8DG2e0N8hM6BfFZfeg8aAqW-EALw_wcB
Youre using an MS 309 Model, but you posted the MS 300 model on Ebay.. does it do the same as the 309? Just making sure..
Thanks for this video!! I had an error code pop up on 2018 YZF-R1 and didn't want to take back to the dealer. There's also a cable you can make yourself for modifying the ECU if you're interested. I'll be pursuing this soon. www.r1-forum.com/forums/46-how-tos/572674-how-diy-yec-interface-cable.html