Load-N-Go Confusion Resolved.
Вставка
- Опубліковано 14 жов 2024
- Load N Go Confusion Explained! Use your loader to move your mower deck!
Load N Go links:
1023E/1025R/1026R/2025R 60D Up to ~mid 2020
www.greenparts...
2025R 60D must also order this:
www.greenparts...
2025R 2017+ 54D
www.greenparts...
2032R/2038R 2017+
3120,3320,3520,3720,3033R,3039R,3046R
www.greenparts...
Tractor Time with Tim Information:
Website: TractorTimewith...
Favorite Products: amazon.com/shop...
TTWT Merchandise: TractorTimeWith...
Facebook: / tractortimewithtim
Sponsors:
Lube Shuttle Grease Gun and Grease
lube-shuttle.u...
Use Code TTWT for Discount
John Deere 2038R, 5075E, & 835M HVAC Gator
AHW LLC John Deere Dealership
www.ahwllc.com/
John Deere Parts - Load-N-Go
www.greenparts...
Use code TTWT for FREE Shipping
Bluetooth Hearing Protection
ISOtunes link: bit.ly/2sCMOG4
$10 Discount with Coupon Code TTWT
Now! More confused just talk to Deere service at Newberry Indiana and according to parts manual for my 54" mower on a 2020 1025R load and go does work....I don't know who to believe I have a bad heart and this is a main reason I am ordering this...
Both of us are correct...if you can believe that!
The confusion is that Deere hasn’t started producing what they call 2020 units yet.
...the ones using the. Same deck as the 2025r!
I tried to avoid talking about this, as like you say, it just adds to the confusion.
If you rewatch the video, note how specifically I say ...no 1025r which is out or available today....
I can’t say a model year because many folks THINK they have purchased a 2020 model.
Truth is, these are still 2019 models.
Probably mid June before the 2025r compatible deck on 1025r rolls off the line.
I found this this morning on 1025r Facebook group Tim thought maybe be interesting knowing what year it is. Deere Year identification!!!!!!!
Tim Beranek 10th digit in a 17 digit VIN. John Deere uses the same number / letter codes to identify the model year as the auto industry does. YWIA
6h Like Reply
Tim Beranek
• Vue do not the www with
1980
1981
1984
196
1987
1988
1990
1991
2000
2001
1992 2002
1990
1994
1995
1997
1998
1999
2009
2004
2005
2000
2007
2008
2009
V
W
X
Reply
that they wil
B
2010
2011
2012
2013
2014
2015
2010
2017
2018
201
MITTELUPPORT
Apparently there is no load-n-go attachment for the 60D mid-mount mower that fits a 2038R. There is one for the 72D version but not the smaller 60D. It's hard to understand why!
You are correct. It all has to do with fitment. The width of the mowers and the construction of the mowers make some of the fitment more difficult. At least this is my assumption.
Since I last wrote things have changed!lol load n go would not work on a 54" so I went with a 60 " with load n go ..I had to cut a groove in my Ken's bolt on step because every time I raise deck it would hit bottom of step..I cut half inch groove on front of step and now works just fine....
Word to John Deere! We need this for the 1025R with the 54d mower deck. There is probably a market of A million owners.. As always , Nice Job Tim
i'll buy one!
Last year when you did your video on the Load -N-Go I immediately ordered mine for my 60D and 1025R. It was the best improvement I've made! It fit perfectly and made changing my blades a snap. Until then it was a back breaking process for me to sharpen or change the blades. I have had some issues with it vibrating the bolts loose no matter how much I tighten them. Next time I work on the blades I'll be putting them back with some Loc-tite.
I wasn't meaning to give you a hard time Tim. You do put out a lot of great videos that i'm sure are very helpful to many viewers including me. Just that sometimes the small detail's can make a big deference. God bless you and your family.
Thanks Tim! Great information. I actually got your channel information from my local dealer when I bought my 1025R back in 2017. Your channel has helped me so much in my tractor travels. Please keep up the great information.
Great to hear, Ron! Thanks!
I’m a Kubota owner but I appreciate all these videos!
Thanks for watching. We try to mix it up. Some are Deere specific, but most are applicable to all brands.
Thanks to you, those were the first thing I requested the dealer add to my deck on my new 1025. They are a true blessing for us “seniors.” Thanks for another great vid.
I have a 2022 1025R with the 54D deck and they now make Load & go for the 54D deck. As always, thanks for the info Tim!
Yep, but not for older 54d’s.
Tim, I have the Frontier 5ft loader mounted plow on my 1025R, I have the same problem with the weld around the pin. I completely agree, there's no reason they can't weld the back side and either not weld the front or just have a small weld to avoid interference.
Great Video- FYI- I created a "load and go for the 2038R 60D mowing deck. I have about $170.00 in it. My idea does NOT stay on the mower. Basically, I had 2 pins welded on the mower deck. Next, I purchase a "loader mounting plate"- drilled two holes for the pins- then had welded two flat plate steel on loader plate to catch where the tractor "catches" the mower deck. It work great. This idea I believe would work on any of these mower decks. I would add pictures of this- but I don't know how to attach them to u tube.
I have the same issue "A 2038R with a 60D mower deck" Can you email me some pic's of what you did so I can get some ideas since JD does not have it for our models. Thanks email ken.lemm@att.net
My load and go shipped yesterday for my 72". Can't wait. Great video Tim.
Have you got your angle grinder and some disks ready to fit it !!
2/3 through "box full of kitty" in the background. Too funny. My Fluffy LOVES a good empty box or a piece of paper on the floor. Hilarious to watch her try to fit all of her 8 pounds on a letter size piece of paper.New kitty named Kitty (not known for creative names over here) has laid claim to all of the cat toys:that Fluffy ignored UNTIL Kitty wanted to play with them. Fluffy is about 8 and Kitty was just adopted and I would guess right around a year old.True joy to have them around.You put a lot of research into the deck info: good job and nice of you to do that.
Glad to hear the 72” deck does a fine job mowing. I am currently deciding between a 2025R and a 2032R and would love to see a video on your thoughts between the advantages of your 1025R and 2038R. As always, I love your videos!! Keep up the good work!
I got a set for my (2022) 1025r with 54d deck. and works great.
Speaking of wasted steel. I think it would be a good idea to be able to send the original brackets back to save a little amount of money.
Thanks Tim. Nice Load-N-Go. Wish they had one of those for my mower deck. They don't make them. Your little cats enjoy being in the videos. Have a fine Friday and weekend. Full-watch (except one full commercial) 😊. Will remember to let commercial run through next time. Say hey to Christie.
Great info as always. Thanks for breaking down the models. Much simpler than the parts catalog. And totally agree with Tim about the lock&lube grease gun tip. But the pneumatic grease gun is much cheaper than battery. A little less portable but 10x better than manual gun. And hopefully there will be load & go for 1025R before I find my old VCR so I can view this “taping” on the big screen. Love you guys. Keep it up.
I have metric and imperial ratchet flats myself. I have hard metric and imperial opens and a nice set of long box ends. I can only tell the boxes from all the rest - unless I search and read. Fyi - I was able to get my mover deck off my 1025R - after 'mowing' a T bar! - turned it into an S shaped T bar - useful for scrap only. I was mowing some pea vines growing up against a wall and getting caught (snagging) - it pulled the deck in a rotation angle and then I could get it moving and able to drop it!
Thanks for this episode Tim. 2038 is my dream tractor. Would love a new video of you using it with the Load and Go.
I appreciate the video. Just got my load and go and the instructions are not included. I have to go online to JD and create an account to get directions to download, and after a few searches I have nothing. Crazy! Why would they even put a paper in the box telling me to find instructions online when they could of printed the instructions on that paper. Anyway, your video made it perfectly clear so I will abandon the online account thing. Thanks Tim!
GreenPartStore.com has instructions available for download.
Thank you. I have been waiting for one for my 72d. I will be ordering my load n go today!
Nice grease gun Tim. And I too like the Lock and Lube products! Stay safe and great video!
Yeah, when you say you don’t worry about torquing to specs I don’t either normally. Today I decided to when installing the L n G. Snapped a bolt! Figures...
Tim, I put a "load n go" on my 60D, however I'll have to adjust the deck as the right side has more weight it on that side and it cuts deeper on the right. I put new blades on before using. Enjoy your videos. Keep up the great work. Ozzy
Excellent video Tim. I love videos about the decks and I also think its a good idea to do a 1025 vs 2038 video
Tim you used was the MOS-2 as I was watching, The G200 for mover decks.
👍 thank you Tim 😊!! Absolutely love my load and go. Your recommendation for it!!!!!!! Thank you sir so much for what you do!!!!! And Kristy too!!!!!!
You need a 2025r Tim, because that's what I have, then I can strictly use your videos for questions about my tractor 😆😆😆
Finally I don’t have to wrestle my deck around after taking it off for the year on my 3033r
pretty well could mow with the deck mounted on loader and swath pto shaft pump to hydrulic pump and plug into the hydrulic 3rd function on the loader
You and those cats are a good combo , it’s funny at times !!
Hi Tim, I'm in Australia and love your informative videos. You were a big influence in my decision to by a new 2019 2025R with front end loader and backhoe a couple of months ago. I didn't buy the belly mower as I have a JD 375R ztrak for my mowing and thought i would buy a 3 point hitch finish mower if i wanted to use the tractor for mowing. Is there a possibility you could do a video on 3 point hitch finish mowers? Information on usability, features etc of the mower and sizes suited to these 1025r and 2025r tractors. Thanks again for your videos.
Second request this week for such a review. I’ll look into it.
I've exchanged gearwrenchs before. No issues.
I must be old fashioned. I like using a manual grease gun to I can "feel" the resistance of the zerk. This can indicate future problems that derive from plugged or inadequate grease application issues.
Good job Tim.
Hey Tim,
Brand new owner of a 1025R, we got a 2022 model year with loader and D60. I requested Load-n-go from the dealer and they installed everything and dropped it off last Friday. I noticed my old drive over brackets still had the silver alignment guide attached, the other side had the plastic pully cover attached and that pesky keep cover from spinning self-taping screw. So I called my dealer and they said "They followed the instructions", sure enough the installation instructions do not move the alignment silver rod, nor the chute side pully cover. So I looked and the mounting holes are there on the load-n-go for the alignment rod so I transferred it to the load-n-go. I don't see where it will hit any pulleys or cause any issues. Have you any experience with the 2022 Load-N-Go? Being a newbee to the D60 connect and disconnect I wanted the alignment aid.
Also Thank you for your video's they helped me in the decision between subcompacts. My old 54" Cub Cadet Zero Turn is getting tired and I have a bunch of lawn to mow and other honey do projects on our 5 acres.
Just got mine today thanks again Tim for the video I can’t wait to them installed I’ll get it done soon when I get a chance.
Easy install! You’ll love em!
Each of those four carriage bolts are supposed to have a retaining ring/washer to hold it in place when the nut is removed. The ring/washer also prevents the bolt from becoming a piece of shrapnel should the nut come loose during operation.
I want to thank you Tim!! You might have saved me some grief John Deere salesman is looking into the 54" I ordered with load n go if not available will probably look into getting a 60"instead at either small to no extra cost with load n go..can't wait this 63 year old wants to play in dirt!
Good to hear, Roy. This is way too confusing, and unfortunately, Deere is creating this confusion. It happens. Oh well.
More rivalry between Deere and CAT(s). Those cats are cute.
I wish they had something like that for the 3032E model since that is what I have, but I don't use my tractor for mowing anyway, but it may come in handy. Your cat love sitting on your equipment and is right at home anywhere.
I don't believe the 3032e has mid pto for deck
I'm in negotiations with JD for a brand new 2020 1025r which I'm excited as it'll be my first real tractor. I have a question regarding how to raise the cutting deck high enough off the ground to access the underside of the deck for installation of the Load and Go? I noticed you have a lift to be able to work on the deck but for someone like myself with no lift, what is the easier and safest way to raise the deck off the floor to install the Load and Go? Thanks and you have a new subscriber. Cheers!
With the loader and mower on the tractor, lower it to the ground...lift the front wheels (and therefore the mower deck) off the ground...
Make sense?
That is one of many ways.
Or just tip it up by hand...stand it on edge.
@@TractorTimewithTim So using the loader to lift the deck off the ground, got it. I have a Cub Cadet XT2 with a 54" fabricated deck but the deck itself is pretty light and I can tip it up to work on it. I was worried this 60" deck would be much heavier. Thanks Tim, much appreciated. Cheers!
Tim, could you post that fitment chart on GTT please? That would be useful 👍
I just got my 1025R today this will be one of my first upgrades
Just got these the other day, life happened and delayed this, ordered from GPS with code TTWT for free shipping! Ramps were a little banged up on arrival, 2 metal rapids in a box with no wrapping but they are sending a can of JD yellow to touch them up. Dont think its GPS fault but JD should pack these a bit better. Thanks for the great videos Tim
Great video as usual! I just picked up a 2038r about 2 months ago. I'm wondering if the weld being on the wrong side of the pin has been addressed in a re-design... I've seen a lot of comments about this on various forums too, with some newer comments seeming to state their fit nice and flat to the loader frame
Nope…at least as of 3-4 months ago
@@TractorTimewithTim how do we get this feedback to JD so they know to fix it?
@@mattnicol8882 if this video didn’t do it, I’m stumped. Sometimes you just give up on trying to help.
Price has sure went UP!! Nearly 400 dollars now for them!! Are they available for a 1026r with a 60D deck???
Yes. They will fit 60d for 1026r. Just get the same ones as 1025r pre 2020 model year.
@@TractorTimewithTim Thanks!! Appreciate the reply!!
Them Carlisle tires make me drool. I wonder if their out for the 3046.
Great video! I like seeing the ease of installation. I need one of those lock n lube grease guns!!!!!
Lube shuttle gun. ...lock n lube coupler.
When will the kitty cat coffee cups be available?
Tim thanks wish Kubota had that would make life a little easier
We ilke the grease system but when you have a different platform you don't like to switch we have Milwaukee
God Bless
PaK
Buy a Ztrak and put the mower deck away. 900 series are plush! Love mine
The tractor is strictly a loader, gravel, dirt work, wagon, trailer mover now.
Tim can you use the factory guide rail for the load and go or do you have to buy a different guide rail to bolt to the load and go
factory
Gearwrenches do carry a lifetime warranty.
I thought you had deck lift for your 1025R 54 inch deck a good while ago let me know ??
Thanks Ted
Tim, are those the self sharpening blades and how do you like them? Or was that on a different deck? Hope you have a good weekend sir!
Different deck
Tim: thanks; this was very helpful. However, I have a new 3046R with a 60 inch mower deck (AutoConnect 7-lron Mid-Mount Side
Discharge Mower for 2R Large Frame and 3R Series tractors). At 3:16 of the video, you state that the Load-N-Go is compatible with a 3046R tractor with a 72 inch mower. Is the same true of the 60 inch mower deck? Thanks in advance for your help, and Oskee wow wow from Colorado.
Oakes Wow Wow! I do not know about 60D for 3 series. I guess I should try it on my dad’s!
My thoughts on the deck? Eh. Thoughts on the kitty doing her best to help? Priceless.
Just more confusion. My dealer tells me that the 2020 1025R with 54" deck is available with Load-N-Go.
Yep. Hard for me to undo this Deere induced confusion. Your dealer is correct, but this updated 2020 model has not started shipping yet. If I were to say ‘2020 model’ then everyone who bought a new tractor this spring would think it would be supported. It is NOT supported on current available inventory .
I have the 2032R with the 60D and made my own "Load and Go". The wheel guide is the only piece that needs extensive modification.
Can you please share a picture? I have the same set up.
@@samadams7181 I would be happy too, but am unable to find the place to share the pic.
The cats are priceless 👍
would be nice to see if anybody has any workarounds for the 54D decks without load n go. I contacted JD's via e-mail and their solution was to buy the 60" deck but as one of your veiwers said the 54" deck can cut in some tighter places and the 60 in deck doesn't . there are lots of places on the deck to attach hooks. 2 hooks on the front of the deck will allow you to view the underside, and with a 4 point chain hook system you can lift it onto a pallet then move it where ever. BTW Tim, you suggestion for pallet forks as a must have attachment was bang on. i use them all the time, they are great !
There is another option to use the forks to pick it up. Anyways tim love watching ya!!
Your “shop assistant” looks like she has no fear!
HUMM? Now all you need is to get your deck blades spinning . Then you could trim those low hanging trees,bushes using the FEL! Like the power grease gun system,too
I use Zero turn mower,faster than my retired John Deere lawn tractor. Went from 5/6 hours to 2.5 hours.Cost almost as much as 1025r tho! (8 thousands for ZT) Mentioned that to the ztm salesman and kind got a frown from him,ha,ha! Need both out here,tractor and zero turn for lawn.
I have a 60" deck on my Gen2 2032r and didn't see that on the list.
Correct. Check with greentractortalk.com I think some have made it work.
The "made to work" options look sufficient and also cheaper!
I love the idea,but can you use it with a PTO finishing mower at the same time,eg the front mower knocks down the high stuff,while the finishing mower completes the job in one pass
The load n go is only used for moving the mower deck, it is not powered, you cannot mow with it on the loader.
Tractor Time with Tim pity thou, it would make an insane mowing combination , if you could, when your talking with JD at a later point, you should suggest it, thanks for your time from Australia
Thanks Tim love your videos
More confusion. I went online to order a grease gun from the lube shuttle website. It tells you that you need to pick a region to best order from. Just one problem.... Alabama and Tennessee are in region 6 while Arkansas and Louisiana are listed in Region 7. Mississippi isn’t even listed... lol.
Anyhow, thanks for the great information. Stay safe and God Bless.
The Other Tim with Tractors
Whaattt? Did you use the full link? lube-shuttle.us/store. ? It isn’t asking new for a region?
I don’t know what Mary thinks, but I think you might be greasing quite a bit there :-), The one downside of those electric grease guns...
Great video! Thanks for sharing❗❗❗ 🙂🙂🙂 👍👍👍
Oh look it's Tractor Time with Kitty 😁😁😀😁
I recently bought a 2038R with a 60" deck and was disappointed not to be able to get the load and go. My dealer was confused also and initially told me they could get it.
Check greentractortalk.com. I think there is a thread there stating it will work on 60D 2038r
@@TractorTimewithTim couldn't find the thread "will work on 60D 2038r" could you post a link to it.
The 60D for the 2032R & 2038R don't have a load n go available yet. I stopped at my local JD and they gave me a load n go for a 60 for a 2025R BXX10241, it clearly doesn't fit. I hope they resolve this soon.
Yes there is warranty on gear wrench tools at Gear wrench on line and you find details..
Tim, You took the time to show us the New load -n- go for this deck and you didn't clean out around those Pulleys.
Made fun of myself for that in the video, right??
@@TractorTimewithTim Nope , Just looking after you. 👍👌 I wish that there was an easier way to clean them out without taken them apart
Nice and clean deck, ( underside )
Brand new. Never been used.
Your local advance auto is a seller and warranty place for gear wrench
Well, I’d love one of those, but it doesn’t appear to work with my 2015 3046R. Your figment chart, shows it would fit, but the current fitment chart says doesn’t fit pre-2017 3046R.
Do a video comparing the BX and 2 series turning radius!
Also yes, gearwrench have a lifetime warranty. Advance Auto, and I think Home Depot carry them and will swap em out for you.
Why? Bx and 2032r are totally different classes of machine.
@@TractorTimewithTim yeah but the BX has a pretty awful turning radius, maybe the 2 would line up closer than the 1025r in your comparison videos! My dad's JD 4200 is much larger, but can turn in a much tighter circle than my BX, it's kinda nutty.
Ugg! Still nothing for my gen 1 2025R with 62D mower. I went to the Green Parts Store and it looks like the Load N Go is for auto-connect decks only. Mine has a manual PTO hookup.
Me too Denise!
Why didn't you clean under the belt bearing and grease them when you had them uncovered? The grease helps the bearing to run better, plus the build up of grass and leaves can cause the bearing to run hotter, and it also is taking better care of your equipment.
Ha! Mentioned that in the video.
Yes please, do a series between 1 series and 2 series JD like you did between Kabota and 1 series JD.
If it’s a gear wrench brand they are life time warranty and most auto parts stores and Ace hardware stores carry them
I have a 60” 60D for my 2038R. I didn’t see it on the list. Any thoughts? (For everyone that may ask I have a lot of fruit trees that I weave my way around mowing and I measured before I bought I that there were a couple of places 72” wouldn’t fit through. Not from tree to tree but obstacle like a fence post.)
I also have the 2038R with 60D and would love one of these but I guess we’re out of luck, at least for now
Sol my friend.
I had heard reposts that it works 60D on 2032r/2038r. Deere does not say so. I kinda forgot about this when I made the video. Search greentractortalk.com. I think some folks made it work.
So no 2038r 60”?
Nope.
Those kitties love you!
Do you rub catnip on yourself prior to filming?
🤪
A battery operated grease gun is a must. Plus two supervisor katzs. HMMMMMMM it works for my 3039R. You have to have skid loader clips up front. Yes?
No, JDQA.
Hey Tim a question for you hope you can answer for me does it operate by PTO shaft or hydraulic lines to run the mower deck thank you very much
Uh, no. It does not operate in that position.
Did you have to remove the clips that hold the bolts on the deck? I'm in the process of installing them and they don't sit flat on the deck.
Tim, I don't own a JD tractor but I'm curious as to how the mower deck is powered when installed on the loader. I understand that when you mid-mount the mower deck there is a mid PTO connection for it. But how is powered when you use the Load N Go?
It is not powered. The load n go is for loading and going....not mowing :-)
@@TractorTimewithTim Oh, I see. Now it makes sense. Seems like an expensive proposition though just to move the mower deck around. If one already had forks that would seem easier and cheaper. I can see working on the blades and cleaning the underside of the mower deck an easier chore with the Load N Go.
Tim you do know those two cats own everything in the shop and you are just a visitor.
Yep.
Home Depot has a lifetime replacement warranty on gear wrench.
Can you use the Load-N-Go to set the deck up on a shelf? I suspect the loader can't dump enough, but it would be nice to know for sure.
We show that in last years episode. About waist high to sit it flat. Could hang it vertically much higher.
@@TractorTimewithTim Ah thanks. I most likely watched it, but forgot that part.
You can stick the flat part of the screwdriver between the new yellow bracket and the green part of the deck and then pry up the yellow bracket to engage the square of the carriage head into the deck and then the impact will spin it down without the nut wanting to throw off the screwdriver as happened with you. Old ag teacher and farmer ..............
Mary got ya back for scaring him
Sir,
I have installed the JD load and go brackets on my 1025r 60” auto connect.
I do use them as it makes maintaining and cleaning deck easy.
However- seems now I can’t attach my JD power Flow bagger! Has JD addressed this or is there a fix?
Originally my dealer claimed I could use both but there is no way to run the power flow belt to the pulley.. dealer was supposed to look into this but has failed..
Hoping you can help
Thanks
Erin
The load n go are not compatible with the power flow. They are compatible with the TKV20. The TKV20 works better anyway, maybe it is time to trade up :-)
I would think that John Deere has probably sold a boat load of 1025r. Maybe more units than most of there other models combined. And they don’t have a load n go for that model. Is the technical difficulties just to great to overcome or did they just screw up a great chance to sell to all the 1025 owners an attachment that would be a game changer? Wow.
They have Load N ago for 1025r 60 inch deck.
Tractor Time with Tim I’m sorry I was referring to the 1025r 54d decks.
I am considering buying a mcs20 material collection system but dealer says the load and go prevents attaching/detaching the power flow belt on the mower pulley, and after watching this video I can see that would be the case. However, I wonder if it would be easy to detach the load and go then attach the power flow pulley,,, and then reattach the load and go while the mower deck is attached to the tractor?... Thoughts?
I suggest you buy the TerraKing tkv20. Made by the same folks who make the Deere MCS, but has a PTO driven fan which works better than the power flow.
We have several videos showing it in action.
Get a 5% discount when you order from terraking.com (via phone) when you mention TTWT!
This unit IS compatible with the load n go.
@@TractorTimewithTim ...TY Tim. I like the tkv20, and I requested a few quotes on it, but even the lowest priced quote is too high for me by quite a bit. I’m sure there are quite a few tractor owners that are able and willing to pay the price for the tkv20, but I also think that if tk lowered the price point, they could sell quite a few more units and quite likely would increase their profit, even if their margin shrunk some... increased volume would more than offset reduced margin... but increased volume might also lead to lower cost to manufacture?... so their margin might not shrink much/any?
I have looked for a used tkv20, but have not found one yet. Would u happen to know of any used ones that are for sale and in good condition?
In the meantime, do you think it would be pretty easy for me to detach/reattach the load and go while the mower deck is attached to the tractor... that would allow me to use the mcs20 with the load and go... and the mcs20 is within my budget. TY
Great video very interesting.......
Does the load-n-go come with a Mary or Martha? Lol!
Hi Tim, Thanks for the vid. Mine is the 2018 54D 1025R so..........I guess that I lose....at least for now. Did you really greazzzzzzzzze Martha? LOL
He needed a little greazing!