I agree the fog appears between layers of lens. I experienced it on CKX Mission AMS Solid Snow Helmet with Dual Lens Shield Matte Black 2XL. I will upload my video shortly.
Love mine. Used it in -25 for days. Used on a Quebec trip, put 1100kms. No issue. Definitely a warm helmet. Only issue is lack of vents. The shield does get condensation on it when not in use. Once you wipe condensation off and use it, never fogs or gets any condensation. He just had a lemon
No unusual leaks on mine either (yet). I've ridden it down to 12F. My sled has no windshield and I always leave the vent open. It's too hot with the vent closed.
I haven't had any problems with mine. I actually find it too warm it should have more venting. My only complaint is the sun shade collecting condensation - if you don't use it when you first put it on, you can't use it later.
Wife had condensation between two lenses as well. Stopped at dealer swapped out shield under warranty. Took two minutes. Register the helmet for a 5 year warranty. I will be happy to get a new shield if it ever happens again. As far as your problem with leaks. I would bet you warped the entire shield heating it with a hair dryer. I have actually done this on another helmet and it drove me nuts. Carry spare cords, or get a magnetic connector....they wear out...everyone goes through 2-3 a season when doing 1500-2000 miles. Also it is sub $300.....if you were expecting an $800 mission or oxygen you should have spend $800 Best suggestion is to use the 5 year warranty, recognize it is a sub $300 a helmet and be grateful you can buy 3 of them for the price of a mission.
I just bought this helmet for this upcoming season, I’m sure it will be a good helmet, I’m not picky, the past 3 seasons I’ve been running a Gmax helmet with a warm weather single lens shield…
It looks like quality control is definitely an issue because I had the exact opposite experience this season. I have a Mission but went on a 1800km 4 day trip and wanted something simple and heated without anything on my face. I had a great experience. Visor was flawless even well down in the minuses. I had no air leaks and after day one removed my balaclava and just went with a neck gator because I found the helmet warm. Only issue is the sun shade same as stated below. Have to put it down right away or you won't be able to use later because of condensation.
It never fogs up when your using it. It only fogs up when your not using it, than decide to use it. I bring a microfibre cloth, than if needed, wipe the condensation off and it never fogs up again.
I agree the fog appears between layers of lens. I experienced it on CKX Mission AMS Solid Snow Helmet with Dual Lens Shield Matte Black 2XL. I will upload my video shortly.
Lol, where is that video 😂
Love mine. Used it in -25 for days. Used on a Quebec trip, put 1100kms. No issue. Definitely a warm helmet. Only issue is lack of vents. The shield does get condensation on it when not in use. Once you wipe condensation off and use it, never fogs or gets any condensation. He just had a lemon
I agree. Only one vent is not sufficient. Thanks for commenting.
Man I love mine! Haven’t had any issues no air leaks and very warm.
I may get a new shield and use it.
No unusual leaks on mine either (yet). I've ridden it down to 12F. My sled has no windshield and I always leave the vent open. It's too hot with the vent closed.
I haven't had any problems with mine. I actually find it too warm it should have more venting. My only complaint is the sun shade collecting condensation - if you don't use it when you first put it on, you can't use it later.
I agree. I’m going to order a new shield and try it again.
I agree. I got rid of mine. Very disappointed. Bought a CKX mission and very happy with it. Best helmet I have ever worn!!
Здравствуйте!
Какой шлем в итоге вы приобрели на замену этому некачестенному CKX?
И довольны ли вы новым шлемом?
Wife had condensation between two lenses as well. Stopped at dealer swapped out shield under warranty. Took two minutes. Register the helmet for a 5 year warranty. I will be happy to get a new shield if it ever happens again. As far as your problem with leaks. I would bet you warped the entire shield heating it with a hair dryer. I have actually done this on another helmet and it drove me nuts. Carry spare cords, or get a magnetic connector....they wear out...everyone goes through 2-3 a season when doing 1500-2000 miles. Also it is sub $300.....if you were expecting an $800 mission or oxygen you should have spend $800
Best suggestion is to use the 5 year warranty, recognize it is a sub $300 a helmet and be grateful you can buy 3 of them for the price of a mission.
Thanks for commenting! I’ll get one of the magnetic cords and do a video.
Thanks for the advice.
I just bought this helmet for this upcoming season, I’m sure it will be a good helmet, I’m not picky, the past 3 seasons I’ve been running a Gmax helmet with a warm weather single lens shield…
It looks like quality control is definitely an issue because I had the exact opposite experience this season. I have a Mission but went on a 1800km 4 day trip and wanted something simple and heated without anything on my face. I had a great experience. Visor was flawless even well down in the minuses. I had no air leaks and after day one removed my balaclava and just went with a neck gator because I found the helmet warm. Only issue is the sun shade same as stated below. Have to put it down right away or you won't be able to use later because of condensation.
Yeah, I really like the features, but it’s a snowmobile helmet, so they all have to work or the experience isn’t good.
Does the yellow visor ever fog up? I got the quest and it always fogs on cold weather
Yep. It’s bad.
It never fogs up when your using it. It only fogs up when your not using it, than decide to use it. I bring a microfibre cloth, than if needed, wipe the condensation off and it never fogs up again.
I love mine! I havent had any of the issues you have had.
Glad to hear! I’m going to order a new shield and try it again next season