Thank you for this detailed video, it made it very easy for me to prep the remote control unit and take off the door panel. Sadly as mine does not have electric windows or electric mirrors there is no 12v connection inside the door, so I have to find the wire on its way to the central lock controller under the dashboard.
For others to know. I got a polo 9n. And it didnt work with a 180ohm, open and directly on the close. I actually had to use the 180ohm, as in the video. But had to connect the close signal, with a 680ohm to the brown /green, that goes to the lock/unlock button in the car door. Then it worked for me.
I have ordered the 680 ohms resistor waiting for it to come I hope it works, can I ask how did u figure this out? Did you find this on a forum or website do you have a link ?
@@sunilbfd5268 I sepnt many days with a car half finished, trying af testing. Reading comments searching videos. Then I by accident saw a small back dot on the lock/unlock button in the car, where i took a volt meter, at tested it. Because it looked like a small resistor. :D And With small knowledge there was 3 wires to the button, I could always open an close on that. I knew there had to be a way. I finally i found the right combo.
@@aalexanderb that’s good man I just got the resistor today and tried it and it worked! Thanks for that. But by my shit luck I just broke my 180 ohm resistor so gotta wait for more to come now haha
So I got it all setup now and it works fine. The only problem I have with your method is that when locking through the door switch instead of the latch (blue and white). The fuel door does not lock with the button. So I’m trying to find out the correct resistor to lock from the blue/white wire. It’s just weird as every other guide says to connect it directly without any resistor. I have now ordered a 1k ohm resistor to see if that will be able to lock the car from the blue/white wire. (But this is just a wild guess)
Where can I buy that keyless for VW polo, that is the same as that? If you can give me the name of the seller to buy, I bought a universal one but it's different, I installed it but it doesn't work perfectly,. Thanks
Have the same unit installed on a Skoda Fabia mk 2. Lately the passenger front door stopped working, after a period when random functioned. I don't hear any sound there when I use the remote. I checked the connections in the pillar, didn't see anything wrong there. Is it the door lock the culprit?
Hi, from what I can tell there is a relay in the unit so when you use the remote you should hear the relay click in the black box. Maybe the unit itself is faulty. If you have a multimeter and haven't done so already, check that your getting 12v, and the earth too. Hope that helps.
Hi,great video, thanks alot.I have 2007 polo too and wanted to install it since ages.Some questions though,does pressing lock button longer shuts the front open windows,(they are powered windows)? And does indicators blink while locking/unlcking?
Hi, I checked and in my case holding down on the unlock doesn't open or close the front windows automatically. I didn't connect the wires so that the indicators would flash when locking even tho it does have that function. Cheers.
Unfortunately I didn't connect it, I don't see a reason why it wouldn't work. But as i still need to physically pull on the handle to open the boot I didn't see the point if the car is already unlocked. If you do manage to connect it let us know. Cheers
Hi, i found the kit on amazon, i just searched universal Car Keyless Entry System and there are plenty of different sellers selling the same thing looking at their pictures. Hope that helps.
Hi, I found the wiring diagram through the uk-polos.net forum here is the link to the pdf i used which has all the different wiring for each model f.shortnd.it/ukp/vw_polo.pdf
I'm sure you can trace the wires to the fuse panel, and connect to them at any point. I used the door panel for ease. I would also take into account the location of the antena to get a good signal.
Hi, your polo is probably a 6N model which means that the wiring is slightly different, thers a link in the description to the wiring diagarm, but i pulled this off the forum that i used: White to white/green (CLOSE SIGNAL) White/black to white/yellow (OPEN SIGNAL) No need for the inline resistor.
@@halfinishedprojects its a polo 9n - i have connected one of the White wires to the blue/White, and it will let me open. But if i connect both White and White/Black as pr your guide. It opens on both buttons
Great video! Clear instructions, I’ll update once I’ve installed my keyless lock 🤩
K8yuu
Really love the clear instructions! Looks like a finished project to me- keep them coming👍🏾
Thanks a lot.
I had the same car , mine is now remotely lock/unlock. So convenient now
Thanks a lot for the amazing video, very useful. Without your help it was a complete nonlogical constatations😅 . Thanks again 🙏
Thank you for this detailed video, it made it very easy for me to prep the remote control unit and take off the door panel. Sadly as mine does not have electric windows or electric mirrors there is no 12v connection inside the door, so I have to find the wire on its way to the central lock controller under the dashboard.
Awesome! So handy, can't wait to try it on my own car
Fantastic clear instructions I will try in my polo!!!!
Great work, can you please link the locking system tgat your are fitting, thanks
For others to know. I got a polo 9n. And it didnt work with a 180ohm, open and directly on the close.
I actually had to use the 180ohm, as in the video. But had to connect the close signal, with a 680ohm to the brown /green, that goes to the lock/unlock button in the car door. Then it worked for me.
I have ordered the 680 ohms resistor waiting for it to come I hope it works, can I ask how did u figure this out? Did you find this on a forum or website do you have a link ?
@@sunilbfd5268 I sepnt many days with a car half finished, trying af testing. Reading comments searching videos. Then I by accident saw a small back dot on the lock/unlock button in the car, where i took a volt meter, at tested it. Because it looked like a small resistor. :D And With small knowledge there was 3 wires to the button, I could always open an close on that. I knew there had to be a way. I finally i found the right combo.
@@aalexanderb that’s good man I just got the resistor today and tried it and it worked! Thanks for that. But by my shit luck I just broke my 180 ohm resistor so gotta wait for more to come now haha
@@sunilbfd5268 haha, that shi.. is annoying 😂
So I got it all setup now and it works fine. The only problem I have with your method is that when locking through the door switch instead of the latch (blue and white). The fuel door does not lock with the button. So I’m trying to find out the correct resistor to lock from the blue/white wire. It’s just weird as every other guide says to connect it directly without any resistor. I have now ordered a 1k ohm resistor to see if that will be able to lock the car from the blue/white wire. (But this is just a wild guess)
Amazing video dude. Could u plz send me the link from where u got the remote kit from and the clip tools for the wires.
Wow beautiful ! Do you think I can do the same job on my Skoda Fabia 1 series (2000) ? Where can I find the wire diagram? Thank you!
Great Video, just convinced me to order mine, and will hopefully get it going. keep it up👍👌
I have polo 6r 2011, i nedd che diagram for my car, i not found the correct wire for open or close☹️
Thanks for the info! Really helpful video!
Glad it was helpful!
Which wires did you connect to the bolt?
Yellow one and the Yellow/Black One?
Yellow, yellow and black and the black one.
My 2007 Polo does not have the factory remote function module. So will this work for me as I am using just standard key?
Is the resistance Mandatory?
Where can I buy that keyless for VW polo, that is the same as that? If you can give me the name of the seller to buy, I bought a universal one but it's different, I installed it but it doesn't work perfectly,. Thanks
Mine door opens but does not close? Also the white/blue did not work so the blue and yellow wire did?
Any suggestions?
I have polo2006 9n i didnt exact same way but door wont lock or open 😢
Same with my 09. Nothing works
Same here. I think it's wired differently. Bet you have electric windows and electric mirrors.
On my kid I have 3 wire spare? Do I just leave them lose or connect together and leave or
Great video really helps installing it
Does anyone know to which wire do i connect the yellow and black/yellow wires
Hi is it still working?
Have the same unit installed on a Skoda Fabia mk 2. Lately the passenger front door stopped working, after a period when random functioned. I don't hear any sound there when I use the remote. I checked the connections in the pillar, didn't see anything wrong there. Is it the door lock the culprit?
Hi, from what I can tell there is a relay in the unit so when you use the remote you should hear the relay click in the black box. Maybe the unit itself is faulty. If you have a multimeter and haven't done so already, check that your getting 12v, and the earth too. Hope that helps.
Hi,great video, thanks alot.I have 2007 polo too and wanted to install it since ages.Some questions though,does pressing lock button longer shuts the front open windows,(they are powered windows)? And does indicators blink while locking/unlcking?
Hi, I checked and in my case holding down on the unlock doesn't open or close the front windows automatically. I didn't connect the wires so that the indicators would flash when locking even tho it does have that function. Cheers.
@@halfinishedprojects thanks for the reply. So,do you know how to make windows shut?i mean which wire connections?
Hello , it's your polo open and closed System positive or negative, thanks for now , and the video
Says in the video
would this work for a 9n3 2007 polo?
Hi could you share the link for the one you got as I have just got one but all wiring is different and instructions are useless thanks
Hi, here is the link to the one I bought amzn.eu/d/cTHlxjJ
can you send me the link to the product?
I tried the same method but it did not work. I did not get the upper side of the lock and the opening side did not work
Hello
Thank you for your video
Can you vive me the exact Model used ?
Thank you
Hi, this is the exact one that I purchased hope that helps. amzn.eu/d/8mRm5fW
Hi,do you know which wires to shut windows?
Hi, from what I can tell this device does not support the window opening function.
Does the boot release work?
Unfortunately I didn't connect it, I don't see a reason why it wouldn't work. But as i still need to physically pull on the handle to open the boot I didn't see the point if the car is already unlocked. If you do manage to connect it let us know. Cheers
What is this kit called and where did you get it thanks
Hi, i found the kit on amazon, i just searched universal Car Keyless Entry System and there are plenty of different sellers selling the same thing looking at their pictures. Hope that helps.
Where can I find this wiring diagram?
Hi, I found the wiring diagram through the uk-polos.net forum here is the link to the pdf i used which has all the different wiring for each model f.shortnd.it/ukp/vw_polo.pdf
Do you really need to mess around removing door cards? This wires must feed through under the dash.
I'm sure you can trace the wires to the fuse panel, and connect to them at any point. I used the door panel for ease. I would also take into account the location of the antena to get a good signal.
Trust my kit to have different colour wires on the plug
Tank you and good luck 👍
Tried every different way on my 9n3 and none of them work :(
I dont get it. Have done everything as us. Have a polo 2002. I can open car, but not lock it. :(
Hi, your polo is probably a 6N model which means that the wiring is slightly different, thers a link in the description to the wiring diagarm, but i pulled this off the forum that i used:
White to white/green (CLOSE SIGNAL)
White/black to white/yellow (OPEN SIGNAL)
No need for the inline resistor.
@@halfinishedprojects its a polo 9n - i have connected one of the White wires to the blue/White, and it will let me open. But if i connect both White and White/Black as pr your guide. It opens on both buttons
@@aalexanderb did you manage to fix this?
@@sunilbfd5268 i have commented my fix :)
@@aalexanderb thanks, do you also have any idea how to make it so the indicator lights flash when unlocking/locking
what unit did you buy to add on any link?