Getting out of the water is always tough. I can’t be mean to it for that :D Plus, carrying a lightweight ground anchor is a good idea for any trip out.
This would make a great UTV for farm use. No more getting stuck and atvs getting wrapped up in weeds and the rider full of sandspurs and bugs. There seems to be enough room for a tool box and some fence posts but maybe it can pull a trailer too?
Good video. For 6000 dollars I would expect they attach the wiring and other parts correctly. If the rest of the vehicle is finished in the same manner....
6 inches wider on each side and another 12 inches equaled out on track length and a few more hp to accommodate, should balance this bad boy out. The more hp, the better.
@@SaintMarneusCalgar that's actually super interesting. It would have thought that for a car it would be cheaper to use plastic. But I suppose, steel manufacturing is really efficient.
@@Bearthedancingman i think the tata nano cost is about 1-2k dollers^^ and also they know what they are doing cause they are the biggest truck manufacturer in the entire world (but nobody knows the brand in the western world)
Honestly, who else would buy this just because its a small company building something that isnt a copy of something else? That alone makes me like it immensely.
@@ghostdevill might not help. The top 'return' track needs to be above the waterline for that to work. Low profile tracks tend to bring as much water forward as they push back.
I don’t know about this one, but they are getting another type called the tinder I think approved for U.S. sale out of Ga. but almost 3 x the $$ but it’s maybe more vehicle too though? This one would be great for most people here in the U.S.A.
Getting out of the water is always tough. I can’t be mean to it for that :D Plus, carrying a lightweight ground anchor is a good idea for any trip out.
That operates nicely. Especially for the price
Some snow usage footage would be cool too.
Video was well done thanks for sharing.
This would make a great UTV for farm use. No more getting stuck and atvs getting wrapped up in weeds and the rider full of sandspurs and bugs. There seems to be enough room for a tool box and some fence posts but maybe it can pull a trailer too?
Definitely can pull a trailer
Agree a diesel would make more sense for this vehicle. Maybe a yanmar?
Where can I buy one of these in the USA?? Or can I? Thanks nice video.
I hope it comes with a large box of bogey wheel bearings .
Good video.
For 6000 dollars I would expect they attach the wiring and other parts correctly. If the rest of the vehicle is finished in the same manner....
It's chinese, so... good fun long time for child and family while at beach or and at snow in water.
@@wcresponder That is no reference for good or bad...
Badly or not attached wiring is a sign of unfinished product wherever it comes from.
@@daviddewilde8041 Yeah I know..It's sarcasm of their customer service/advertising.
@@wcresponder 👍😂
That is really cool probably real expensive too
According to the video, it's half the price of a Chinese ATV.
Lol at that kayak paddle
Das ist fantastisch!
Very good video
cool little toy, i wonder if there is different track options available the atv needs taller Grousers..
as far as i know there are other tracks with taller grousers but i am not sure
Might a Smart Car diesel engine work in this vehicle?
If so, it'd also mean you could have heating (to use with a canopy) and have 12v outlets.
Diesel motor, widen and lengthen, gotta be a better way to get power on water, and maybe a better cargo rack
Yep buy a fat truck or a sherp
Shame the ones available in the US aren't made NEARLY as well.
Are they sold in the USA?
a where to buy on these videos would be nice
33HP? Most Argos have less! $6K? Very reasonable??
@blacknester salaries? What, you can't save? I'm confused. Is it because you are over-taxed?
@blacknester 1k a year or a month? I'm confused.
1K a month per slav
Made where?
Cool..
10 seconds with ole Borat is enough.
6 inches wider on each side and another 12 inches equaled out on track length and a few more hp to accommodate, should balance this bad boy out. The more hp, the better.
I need one in Michigan
A steel body usualy is cheaper than platic even in mass production
Might be more expensive in low numbers but yeah, once production is underway it should be extremely low cost.
@@Bearthedancingman a good example is the tata nano (cheapest car in the world) they wanted to make it out of plastic but steel was cheaper ^^
@@SaintMarneusCalgar that's actually super interesting. It would have thought that for a car it would be cheaper to use plastic. But I suppose, steel manufacturing is really efficient.
@@Bearthedancingman i think the tata nano cost is about 1-2k dollers^^ and also they know what they are doing cause they are the biggest truck manufacturer in the entire world (but nobody knows the brand in the western world)
Any US dealers?
Honestly, who else would buy this just because its a small company building something that isnt a copy of something else?
That alone makes me like it immensely.
so its better to ger an Argo. its cheaper and it seems way more capable
This has a way better track system than the Argo !
Argo starts 15 K remember
Tracks are way too short. Another foot or two in length would make it a real winner.
Brother in every video, r u the rider?
yes almost in every : )
Better own land. Most public land don't allow full or half tracks
I have land, but I'd sooner a quad, I have a lake, next to me, always wanted a floater, but this is too sketchy and slow on water
Looks kind of like a weasel from ww2 era
When your on water I hope you're not in a hurry.
Why are you paddeling? If you spinn the tracks you should move in the water.
in practice it doesn't work in this way
Review Machines Worldwide Then you need a track with teeth on them.
@@ghostdevill might not help. The top 'return' track needs to be above the waterline for that to work. Low profile tracks tend to bring as much water forward as they push back.
Nice try. Chiropractor visit after being in that contraption.
nice but to heavy
I would spend 6 grand on that thing would eat bearings all day long
Junk .
Where can I buy one of these in the USA?? Or can I? Thanks nice video.
I don’t know about this one, but they are getting another type called the tinder I think approved for U.S. sale out of Ga. but almost 3 x the $$ but it’s maybe more vehicle too though? This one would be great for most people here in the U.S.A.