I've never owned a bass boat. But I've been in multiple & used buddies John boats. I prefer my kayak! I can get it hard to get places boats can't! Kayak is way more quiet & stealthy, less presence in the water too. I have zero problems coming in behind boats & catching fish they couldn't, that they spooked. Though I prefer to fish areas where I don't see other people, part of reason I haven't tried the tournament thing. I just want enjoy mother nature, being on water exploring new & hard to get places. Without headache of other humans! It's paid off this summer, I've broken my PB multiple times. 5 biggest largmouth of this year so far is 8.05 - 8.6 - 9.3 - & monster 11.4 she was 26.25 inches long & 17.5 inches in girth. Safety tip for anyone going un-inhabitanted areas to fish by themselves. Send a friend or loved one a gps pin location where you launched. Better to be safe than sorry. If you got hurt & lost/broke your phone. Noone would know where to look for you!
Cool set up, definitely added a lot of goodies to it. I'm sure with pa14 & everything included you probably need the trailer. I've had 2 PA12's now for 9 years. Upgraded to pa12 360 about 2 years ago. I don't fish tournaments but fish 1-2 days a week all year. I finally added my first electronics after last Christmas. An 10"echomap Ultra 106sv, LVS34 system & steady cast heading sensor. Powered by Amped Outdoors 14.8v 32ah lithium. Between sales, coupon codes, Bass pro club points I'm into my entire electronics set up including battery for $2579 + tax. That's cheaper than any other brands 10" unit by itself! I don't have a trolling motor so that battery runs my stuff for about 14 hours on average. I like keeping my set up light as possible & I haul it in my truck & use the Hobie cart when needed. Works well for me. More years I kayak fish more stuff I taken off, except adding the electronics. I do all my rigging myself. I have a 8awg marine grade wire from my DIY battery box in back, running down inside my haul up to my front hatch with my bus bar, black box, fuses. All on plate under my hatch. I bought a sheet of black 3/16 abs plastic, cut out my all my own mounting plates & keel guard. Super low cost & was fun to do. Looks as good as stuff people buy! I run my lvs34 transducer on a Fishing Specialties kayak bow ducer pole, super light & fast deployment. I use a RipaLip sun shade, much better than standard plastic sun shades, check them out! I highly recommend both!!!
Nice setup! Going to set my kayak up somewhat similarly with dual humminbird helix. Close one will be for side imaging, mapping, and mega 360 later on. Front one will be 2d/mega live.
THE BEST PART ABOUT THIS VIDEO IS THIS GUY WAS 100% HONEST ABOUT HOW HE GOT HIS KAYAK AND STUFF. MOST PPL WILL TRY AND MAKE YOU BELIEVE THEY DID IT ALL. GREAT VIDEO SIR HONESTY IS KEY THIS DAY AND AGE
Love the build and what you've done with it. I had asked a question on your other video regarding stowing the Sniper Pole but in this video even though you didn't show how it stows I noticed the 2 clips mounted on the Fishing Specialties plate. Are those just the 1.5" Rubber Clips that Sniper Marine offers? Also one other question are the standard kayak lengths they offer for the Sniper Pole long enough in your opinion for the PA14? (Want to make sure I order the right one) I have a lot of the same stuff on my PA14 such as the FS9 and been obsessing on Active Target and want to pull the trigger so just doing my research. Appreciate your channel and super informative, you gained a subscriber 100%. Love how you reference the people that say why don't you get a bass boat :) I've been asked the same thing and there's just something about the ease and comfort that I love about my kayak compared to my boat.
Hey there! Yes, the 1.5” rubber clips from Sniper Marine is the one that I am using to hold the pole. They are definitely long enough! You can adjust the height in which it sits on the Fishing Specialities mount as well. I get great image with the way I have mine set up. No problem also! I’m here to help with any other questions you may have!
Thanks so much I'm going to start ordering my setup soon just wanted to have a better understanding before dropping another 2k into this project. Might even start entering some tournaments soon and try my luck. Grateful to people like you sharing their experience.
Thank you for watching! I’ve acknowledged that I didn’t list out enough things I would change. Let me know if you see anything other than what I have below! - Relocate FFS through-hull higher on the plate to prevent water from getting in. - Add a cleat for the Torqeedo reverse cable. - Spacers between BlackPak and rod holders to prevent lid from hitting reels. - Relocate electronics battery inside hull to reduce weight in the bow. - Add Innovative Sportsman Rock Guard instead of prop cutter.
Hey Brandon - GREAT video playlist of your Hobie Ike Rig, I have the same rig - and currently am running the MG xi3 for boat position control, and some light "running" to get from A-B. I'm considering adding the torqueedo to my rig, and have a question about steering. How efficient / practical would it be to do without any steering capability on the Torqueedo, locking it in place to go straight ahead - while running longer distances when going place to place. Would the rudder built into the Hobie PA be sufficient to make the small course corrections needed when running A-B like that? The reason I ask, is I'm a fly fisher - and line management is Crucial when fly fishing.... the cleaner I can make the deck, rails, and such of ALL "do-dads" the better as fly line WILL find anything it can to tangle on!
Hey there! Thank you! In regards to the Torqeedo, it truly depends on the fishery that you are mostly fishing. I will 100% recommend foot control steering or the Tim Percy steering kit if possible for safety. I’ve tried early on with just putting locking it in place and it made it very difficult to turn with just the rudder without having to slow down. I can see over time your rudder lines getting weak. I love using the instant throttle when it gets windy on the water to navigate through waves and it would be hard to turn and adjust in a pinch. If you feel like your fisheries require a lot of turning to navigate, it might be best to do one of those steering systems. It was more of a safety and convenience reason that I did it. It’s nice to fish hands free and navigate too. Hope that helps!
Unfortunately we are only allowed to run one motor in our tournament series so I prefer speed over spotlock. I can get away with using my Torqeedo to stay put in wind or current usually.
Dropped the link from where I purchased it. You just need to search your make and model of kayak to see if they make it for yours! www.boatcoversdirect.com/
Here is the link! Just filter to see if they have your make and model. The “Sun Dura” is the one I got. www.boatcoversdirect.com/products/boat_covers/HOBIE_KAYAKS_664/MIRAGE_PRO_ANGLER_14_51251/
I've never owned a bass boat. But I've been in multiple & used buddies John boats. I prefer my kayak! I can get it hard to get places boats can't! Kayak is way more quiet & stealthy, less presence in the water too. I have zero problems coming in behind boats & catching fish they couldn't, that they spooked. Though I prefer to fish areas where I don't see other people, part of reason I haven't tried the tournament thing. I just want enjoy mother nature, being on water exploring new & hard to get places. Without headache of other humans! It's paid off this summer, I've broken my PB multiple times. 5 biggest largmouth of this year so far is 8.05 - 8.6 - 9.3 - & monster 11.4 she was 26.25 inches long & 17.5 inches in girth. Safety tip for anyone going un-inhabitanted areas to fish by themselves. Send a friend or loved one a gps pin location where you launched. Better to be safe than sorry. If you got hurt & lost/broke your phone. Noone would know where to look for you!
I completely agree with everything you just mentioned! I think a lot of others would feel the same way!
Cool set up, definitely added a lot of goodies to it. I'm sure with pa14 & everything included you probably need the trailer. I've had 2 PA12's now for 9 years. Upgraded to pa12 360 about 2 years ago. I don't fish tournaments but fish 1-2 days a week all year. I finally added my first electronics after last Christmas. An 10"echomap Ultra 106sv, LVS34 system & steady cast heading sensor. Powered by Amped Outdoors 14.8v 32ah lithium. Between sales, coupon codes, Bass pro club points I'm into my entire electronics set up including battery for $2579 + tax. That's cheaper than any other brands 10" unit by itself! I don't have a trolling motor so that battery runs my stuff for about 14 hours on average. I like keeping my set up light as possible & I haul it in my truck & use the Hobie cart when needed. Works well for me. More years I kayak fish more stuff I taken off, except adding the electronics. I do all my rigging myself. I have a 8awg marine grade wire from my DIY battery box in back, running down inside my haul up to my front hatch with my bus bar, black box, fuses. All on plate under my hatch. I bought a sheet of black 3/16 abs plastic, cut out my all my own mounting plates & keel guard. Super low cost & was fun to do. Looks as good as stuff people buy! I run my lvs34 transducer on a Fishing Specialties kayak bow ducer pole, super light & fast deployment. I use a RipaLip sun shade, much better than standard plastic sun shades, check them out! I highly recommend both!!!
Absolutely stunning!!thank you!!xxx
Thank YOU!
Good stuff right there. I like all the detail especially the features of your electronics. Thanks for sharing.
Thank you!
This was very a very helpful walkthrough for someone new to kayak fishing!
Glad I could give some insight!
Nice setup! Going to set my kayak up somewhat similarly with dual humminbird helix. Close one will be for side imaging, mapping, and mega 360 later on. Front one will be 2d/mega live.
Sounds like a nice setup!
THE BEST PART ABOUT THIS VIDEO IS THIS GUY WAS 100% HONEST ABOUT HOW HE GOT HIS KAYAK AND STUFF. MOST PPL WILL TRY AND MAKE YOU BELIEVE THEY DID IT ALL. GREAT VIDEO SIR HONESTY IS KEY THIS DAY AND AGE
No reason to lie about anything! Appreciate it! 👊🏼👊🏼👊🏼
Awesome set
Up:) nice video- greetings from Germany
Love it.
Quick question. What size is your cover?.
It’s specific to the pro angler 14!
Love the build and what you've done with it. I had asked a question on your other video regarding stowing the Sniper Pole but in this video even though you didn't show how it stows I noticed the 2 clips mounted on the Fishing Specialties plate. Are those just the 1.5" Rubber Clips that Sniper Marine offers? Also one other question are the standard kayak lengths they offer for the Sniper Pole long enough in your opinion for the PA14? (Want to make sure I order the right one) I have a lot of the same stuff on my PA14 such as the FS9 and been obsessing on Active Target and want to pull the trigger so just doing my research. Appreciate your channel and super informative, you gained a subscriber 100%. Love how you reference the people that say why don't you get a bass boat :) I've been asked the same thing and there's just something about the ease and comfort that I love about my kayak compared to my boat.
Hey there! Yes, the 1.5” rubber clips from Sniper Marine is the one that I am using to hold the pole. They are definitely long enough! You can adjust the height in which it sits on the Fishing Specialities mount as well. I get great image with the way I have mine set up.
No problem also! I’m here to help with any other questions you may have!
Thanks so much I'm going to start ordering my setup soon just wanted to have a better understanding before dropping another 2k into this project. Might even start entering some tournaments soon and try my luck. Grateful to people like you sharing their experience.
Man what an epic build! Very nice
Thank you!
Thank you for watching! I’ve acknowledged that I didn’t list out enough things I would change. Let me know if you see anything other than what I have below!
- Relocate FFS through-hull higher on the plate to prevent water from getting in.
- Add a cleat for the Torqeedo reverse cable.
- Spacers between BlackPak and rod holders to prevent lid from hitting reels.
- Relocate electronics battery inside hull to reduce weight in the bow.
- Add Innovative Sportsman Rock Guard instead of prop cutter.
Hey Brandon - GREAT video playlist of your Hobie Ike Rig, I have the same rig - and currently am running the MG xi3 for boat position control, and some light "running" to get from A-B. I'm considering adding the torqueedo to my rig, and have a question about steering. How efficient / practical would it be to do without any steering capability on the Torqueedo, locking it in place to go straight ahead - while running longer distances when going place to place. Would the rudder built into the Hobie PA be sufficient to make the small course corrections needed when running A-B like that?
The reason I ask, is I'm a fly fisher - and line management is Crucial when fly fishing.... the cleaner I can make the deck, rails, and such of ALL "do-dads" the better as fly line WILL find anything it can to tangle on!
Hey there! Thank you!
In regards to the Torqeedo, it truly depends on the fishery that you are mostly fishing. I will 100% recommend foot control steering or the Tim Percy steering kit if possible for safety. I’ve tried early on with just putting locking it in place and it made it very difficult to turn with just the rudder without having to slow down. I can see over time your rudder lines getting weak. I love using the instant throttle when it gets windy on the water to navigate through waves and it would be hard to turn and adjust in a pinch.
If you feel like your fisheries require a lot of turning to navigate, it might be best to do one of those steering systems. It was more of a safety and convenience reason that I did it. It’s nice to fish hands free and navigate too. Hope that helps!
Sweet set up! Gotta link for the cover?
Thanks! Here is the link: www.covercraft.com/us/en/boat-covers
Amazing build
Thank you!
Why not a troll on front and foot steer
Just wondering why you like this set up best amazing rig
Unfortunately we are only allowed to run one motor in our tournament series so I prefer speed over spotlock. I can get away with using my Torqeedo to stay put in wind or current usually.
If u had to choose between the Bonafide PWR129 and the Native Titan X, which one would u choose?
Titan X for sure!
Do you have a link for cover
Wow dream rig thinking about this rig any issues on the 360 drive
Nothing for me so far!
Do you have videos of your build because I’d watch that.
I have a full playlist on my channel from the beginning stages of the build!
Nice rig !!
Thank you!
Amazing build sir! Curious on next years build. I have a guess on what it might be?
Guesses can be made, but I can neither confirm or deny. 😂
Native Titan X
Love it ❤
Dove posso acquistare questo comando pedale per motore ?
Do you have a link to the boat cover?
Dropped the link from where I purchased it. You just need to search your make and model of kayak to see if they make it for yours!
www.boatcoversdirect.com/
Can you link the kayak cover you are using?
Here is the link! Just filter to see if they have your make and model. The “Sun Dura” is the one I got.
www.boatcoversdirect.com/products/boat_covers/HOBIE_KAYAKS_664/MIRAGE_PRO_ANGLER_14_51251/
Damn I want one ☝️ but my blow up raft will do
Good morning. I enjoy watching your videos. My question is, how do you connect your battery to your batteries
Hi sorry, I don’t quite understand your question. Connect battery to batteries? Happy to help’
Sorry about that. What connectors do you use
To connect your trolling motor at the battery terminal