I changed my oil on my 22 GTX Limited I put 1 Gallon of oil, I still get low Oil light On, any suggestions why ? No leak no burning oil. I have 10 hours on the machine.
Yeah, other than running it on the hose for 5 mins. That will cause serious damage to the carbon seal. All you need to do is to change the oil after you ride. The closed cooling system will keep the oil warm for several hours. All the little steps to get more oil out are not that beneficial. You can only get about 3-3.5 quarts out depending on the current level. The system holds over 5 quarts so you can only get out a bit over half of the oil. Getting another few ounces means nothing. I have three 300s and run them at the low mark on the stick. The plasma coated cylinders allow a large amount of fuel to enter the sump. These oil level in these engines will actually increase with hours of use. Change every 25 hours of so to avoid the oil getting too thin.
Why don’t you install the small black o-ring?
I got the same exact machine. You were talking about the D.E.S.S ball lock? Did you get that from the dealer or contacted seadoo directly?
what is the supercharger maintenance on these machines like? is it every 50-100h?
2017+ models do not require supercharger maintenance.
So are you saying you can reset the maintenance reminder once it does come on ? how (without candoopro ????)
That looks dirty for 10 hours. Mine looks brand new but I replaced it anyway.
I changed my oil on my 22 GTX Limited I put 1 Gallon of oil, I still get low Oil light On, any suggestions why ? No leak no burning oil. I have 10 hours on the machine.
Check out this discussion on the proper technique to check your oil level:
ua-cam.com/video/ql7upFIs1aU/v-deo.html
I would think it would take more then 2.5 quarts
That's because he didn't follow the procedure to remove all the oil.
@@boandjill I ran mine in the lake and sucked the oil out while it was in the water got oil nice and hot got 1gal out
To see how to do the job correctly, go to this video.
ua-cam.com/video/5UzbyZpv1LM/v-deo.html
Yeah, other than running it on the hose for 5 mins. That will cause serious damage to the carbon seal. All you need to do is to change the oil after you ride. The closed cooling system will keep the oil warm for several hours. All the little steps to get more oil out are not that beneficial. You can only get about 3-3.5 quarts out depending on the current level. The system holds over 5 quarts so you can only get out a bit over half of the oil. Getting another few ounces means nothing. I have three 300s and run them at the low mark on the stick. The plasma coated cylinders allow a large amount of fuel to enter the sump. These oil level in these engines will actually increase with hours of use. Change every 25 hours of so to avoid the oil getting too thin.
You mean the guy who said run the engine for FIVE MINUTES is your recommendation?