Honda CB500X REAR BRAKE FLUID CHANGE 👨🔧---🏍 HINTS AND TIPS
Вставка
- Опубліковано 4 жов 2024
- In this video I am going to show you how to CHANGE your REAR BRAKE FLUID ! With HINTS and TIPS from The Old Mechanic.
Tools you need:
46-Piece 1/4" Ratchet Set Metric: amzn.to/3jpR8pM
WERA screwdriver for Phillips Screws: amzn.to/3VqJSXT
Wrench 8mm: amzn.to/3YMkheV
For my playlist of the HONDA CB500X MAINTENANCE CLICK HERE:
• HONDA CB500X maintenance
Motorcycle Maintenance For Beginners - AND What You Need To Know
With this DO IT YOURSELF video you can save a lot of money.
So be sure to watch this WHOLE video, so you don't mis important information.
Don't forget to SUBSCRIBE, LIKE and SHARE this video with your all your friends on FaceBook and WhatsApp.
Motorcycle maintenance made easy by: The Old Mechanic
Rubber diaphragm as you said, great video
There you are. Hahaha. That guy waited for a while to change that fluid. Great video Sir.
Randy
😂 Hi Randy, it was a video that I still had to edit. 😉👍🏻👊🏻
Nobody talks much about those dang shims/springs!!! They confounded me at times!
The best mécanique i never see thank you very
Thank you 🙏🏻😉
Thank you, will do it myself next time 👍🏻👌🏻
Have fun! 👍🏻💪🏻😉
Thanks for your nice video! I love my 2019 cb500x too, just a great friendly bike. Changed my coolant and brake fluid today. The coolant change was a bit tedious because yah need to remove the light bar and body panels to access the radiator cap and of course I had to heat cycle the engine several times to ensure it was filled to capacity before reinstalling the body panels. The old coolant looked good but what the heck now it's fresh and the water pump is happy!
Keep it up! I like your demeanor and pace, on the verge of too slow, but not!!! Thanks! My 2020 CB500 X is the best thing I’ve ever purchase in my 57 years!!!
Good choice!
Please show rear brake pad change. Good video. Thank you.
Great video thank you!
I am interested in the elbow deflecting the exhaust. Is it welded on? Any tips appreciated.
Hello from France ! i saw your good video front break change but have done it for rear break please, i don't find it ... (i suppose you didn't realise it) ... thank you for your tips.
Well explained. Question. What is this open/close technique good for? Why not pumping, pumping, pumping and close instead?
Open close is to keep the pressure up, and no air can go into the system 😉
@@TheOldMechanic got it. Thanks
So you open when there is pressure from the brake lever and close before you let the lever lose, right?
yep !
You need to get a grinder to that rear tyre to remove them chicken strips 😂 good tutorial this one and you did it all on the same day 🤣
😂👍🏻👊🏻🏍
What's the diameter of the tubing? Or perhaps, what's the best way to ensure I get the right sizing? (I'm the old NOT mechanic!).
This is a great video though! As are the others.
Hey, I made my own today, in a sense. I happened to have some small engine fuel line laying around. I chose one with a thicker outer wall, just to give myself a little more room to play with doing this, but honestly I think I should have used a somewhat larger inner diameter tube with the same process.
So ... I say go have a look at your bleeder valve, and choose some tubing with an inner diameter a little thinner. To have a metric to compare at the store, find something a little thinner -- like maybe the width of your car key -- to make sure you aren't getting something too large.
What I did was this: I carefully (OK, not carefully enough the first time -- be careful) heated up the last half-inch or so with a lighter, and shoved in a screwdriver to help flare the tubing a little bit. I let that cool on the screwdriver, and then I warmed it up again and stretched it over the bleeder valve, carefully rocking it back and forth until it slipped over. Again, I let it cool. It will shrink back a little, but for this job you shouldn't need like a ton of grip. You're just providing a path of travel for the old fluid.
Hello there.
Just a quick question.
Towards the end, when you put the cap back on you've read "warning, only use dot4".
My cuestión is ... Why not dot5.1? Would it be harmful?
5.1 is also good. Don't use dot 5 ! !
@@TheOldMechanic thank you for your answer!!!
I have a question about the maintenance on the cb500 X mines 2016 i need to change the thermostat because the housing gasket/seal is wheeling slightly when left on side stand do I need to replace and flush the coolant if I do replace it I have the parts here just want to know before I start !!
Diaphragm, pronounced with the "g" silent...dia-fram.
You need to invest in some blue roll 😂