Extreme Tungsten Stickout ! TIG Welding Techniques!
Вставка
- Опубліковано 25 сер 2024
- Extreme Tungsten Stickout ! TIG Welding Techniques!
TIG welding is always done at a push angle. A push angle means your torch is over the weld, and you push the weld pool along the joint. The distance between the tungsten and the weld is also something you need to watch as you go about your weld. Standard nozzles release a broad plume of shielding gas over your weld. In comparison, a gas lens improves shielding gas coverage by distributing gas around the tungsten more efficiently with less turbulence. You can also have the tungsten stick out further with a gas lens, giving you better maneuverability and visibility of the weld pool. This is great for when you need to weld in tight spaces.
#tig #tigwelding #tigroot
None of these videos are recorded in a fancy shop surrounded by sponsorship banners!
My videos are recorded at working sites in various locations and welding positions.
90% of my welding projects in videos are x-rayed, and if you like to see hands-on projects, welcome!
If you liked this video please give it a thumbs up, share it, subscribe, and click the bell.
It doesn’t cost you anything but massively helps my UA-cam channel. Thank you.
Support this channel with 🔔 Subscribe and 👍 Like!
/ x3mtig
Before I retired, I work at a nuclear power plant. We had a project where we installed a whole bunch of these for vent lines on various size lines. They were challenging to say the least especially when they were out in the field and not in the shop. Some required two welders, one on each side because it was impossible for one person to get around the weld-o-let. We did not predrill the holes because they were hot tapped later after the valve was installed. I wish I would have seen this back then it surely would have helped. Nice tutorial.
what does hot tapping mean
It means you would do all the work with fluid still in the line. After you welded on the nipple you would install a ball valve with a hot tap rig which had a long drill bit with packing on the end to seal it. There was a vent line on it to catch the fluid and you would drill the hole without draining the pipe. It was challenging for us because we had to collect the chips and weigh them. They keep a little pressure (no flow) in the line to help force the chips out the vent line and into a bucket. Hope this helps. @@natenate2280
Cutting a pipe while theyre still product running through it.. tappin into the line while itz still "hot"@@natenate2280
Thank you. Great work👌
Literally the best on youtube right now😊
Nice work 😁
Awesome channel !!!
Ssoo gooood 😊
Yeap just amazing! God bless you sir! I’m your favorite, you’re my favorite! Wait yes. God Bless you Sir!
That's tthe biggest gap I've eveseen on an o-let. Cool videos.
Thanks again for taking the time to make these awesome videos at work. Love your content
Glad you like them!
@@X3MTIG arc shot, watching in real time/speed, commentary..perfect way to learn.
That final pass really looked good. When I start out I like a smaller cup with 1/8th Gap. You still get the penetration and it saves time. You can turn up the amps just a little bit with a smaller cup and go like hell. You seem to have more patience than I do. I slow it down at the end . Great Video, THANKS
Nice socket welding👍
I just found these videos and really like the tutorial.
Glad to hear it!👍
Good job idol nice sharing
Hey your content its gold thank you. It help alot starting in this field
Great video!
Another great one🔥, thank you!
Thank you brother 👍
Very good
👍👍👍👍
Thanks for sharing 😊
You're video's are good
Awesome skills!
انا متشوق للعمل معك في يوم ما يا استاذي لولا تعليمك لا اصل ما انا عليه شكرا
技术很好，严谨
Super 👌
Impressive
New subscriber. I thoroughly enjoy watching your video. Thanks for sharing. GBU
Thanks for subbing!
Sim mestre uma bela apresentação ótima para quando soldagem em unhas e botas porque também fica difícil para executar uma boa raíz quando temos que fazer o trabalho no campo obrigado pela orientação 🙏
Super root bro
I want you let me know how to handle the narrower gap while I am processing the root pass
488 welder
Another great video from the master. What is the small groove cut into your gas cup for? Thanks for the videos please keep them coming. - The LowlyGrasshopper.
Thanks bud, that small groove is just damaged cup.
45lpm mine has only 25lpm stripes, i had to bump it up till the ball hit the spring when welding outside with strong wind close to river, good times, retired now🤨
👏👏👏👏🔝👍👍👍
Beautiful work, but why the gap ?
They want full root penetration, that’s why you need a gap.
Başarılı
Great example! Just got into the booth myself. Struggling with SS 12” Pipe with bad high-low fit up. 1/8 gap to flush. Trying to use keyhole technique but lack penetration/fusion on one Side. Got any tips? Thanks again for ur vids
Grab a grinder and open that gap, especially that part where you have lack of fusion or give your pipefitter to do that. Don’t forget, you don’t have to weld it if you don’t like fit up, soon as you put the tacks you own it!
I found back-feeding worked well for catchinhg hi-lo
do you run a wire brush down through the socket to clean the inner weld and see what the weld looks like?
Здравствуйте Хороший видео Спасибо за видео А где на казахском перевод
Sim mestre você é muito bom mais eu gostaria de ganhar de presente um jogo desse bocal lens para ficar melhor ainda kkkk❤️🙏
😘😘thank you friend me
Nice video and technique.
What baffles me though that even now in 21st century in year 2023 people use obsolete radioactive tungstens....
I understand that some companies won't provide better tungstens but damn, they should really wake up.
Hey bud, thanks for your comment. I agree with you, but it’s not only about companies being cheap or neglectful of their employees. The entire industry is like that. The main thing is, whoever is using thoriated tungsten, should be aware of radioactive dust created during the grinding or sharpening of the tungsten. That’s why respiratory protection should be used, and taken that seriously! It’s all about educating people, and I think many companies are failing in that segment.
@@X3MTIG Exactly, it's a huge issue.
Also. Radioactive dust is being released while sharpening thoriated tungsten and with this I'm not sure what kind of particles does thorium release whether it's alpha, beta or gamma, but with the last two they penetrate through much more than just a paper filter. It would also make sense to discard the filters/the mask every time you sharpen your tungstens which is not very sustainable.
Also, there are other tungstens that are far better performing than thoriated so really no reason why keep this obsolete piece of technology. Do some research on it and present it to the management team, alternatively contact OSHA equivalent in your country.
Сильно перегреваете метал, в сформированном вами соединении будет повышенная межкристаллитная коррозия.
На таком токе нужно работать чуть быстрей. Нужно больше позволять остыть изделию между каждым проходом.
why such a big gap between pipe and the fixture? Good video.
Bigger gaps are common for tig applications.
@@X3MTIG why? Lack of penetration?
Could you also run SMAW 7018 5/32" rod for the cap?
You can
Great work, but I must ask, why do you not get yourself a helmet with a proper visor? Like speedglas g5-02 or if you prefer perma shade a helmet with a way bigger visor?
I got very good vision in my $20 bucks helmet. Fancy mask it doesn’t make you better welder!
@@X3MTIG I agree that its the welder not the mask but why not give yourself every bit of advantage you can have? When I began welding I bought the best welding mask there is right away. Wouldnt swap for anything else.
@@digitalscale76the best ones are the light weight hoods, especially in tides spots (Just my opinion)
@@vincenzodellavalle9094 I'm sorry what is a weight hood? I haven't met with this phrase yet. Do you mean a leather welding mask? It's also called the devil over here. And it's by no means the best One, it's Perma shade. It's just a different type of equipment you use in tight fits.
Do you really use thoriated electrodes?
Yes, Tungsten is 2% thoriated.
Some joints are just made for mig/fcaw
how do you record these videos?
What kind of gas is used? Is it acytylen? Wonder if
it welding in Uran can be done?
Argon gas
Did u happen to play pubg? Your voice sounds familiar
No lol 😂 I’m not a gamer!
my confidecne tells me i could do it with MAG same outcome haha
where do you work?
Pardon my ignorance but why such a huge gap? What’s wrong with just setting the bung down onto the pipe and welding it that way? Will it not get penetration or something?
Thanks for your question. It’s just personal preference thing!
In my opinion that gap is huge too, but setting the bung with totally no gap puts a question mark on penetration
What country are you from?
Aaaaaaaaa
Your videos are relly good and I think your chnnel will be big, just get rid of the music.
Thanks bud 👍
Just curious what we’re you leveling the weld o let to?
It would be levelled parallel to the pipe lengthwise. In the other axis, it would be levelled to a flange or other Olet or pipe running In that direction.
@@juliefleet1268 just watched the video again, I didn’t notice the 90 on the end when I first watched it, sorry about the confusion
It can be confusing. You’d also want to level the olet to the hole. Sometimes the olet will be used to insert a probe into the pipe and you want the probe to be straight down into it.
Why does he sound like Zlatan Ibrahimovic?
In my humble opinion, you used too much porcelain.
Зачем так выкаблучиваться, кольцо из проволки нельзя было проложить и обварить?
Товарищ, это под высокое давление, а не отопление в квартире
Какая разница, высокое-низкое, присадочная проволка так же расплавится и будет сплошной шов.
Может проще изначально нормальный зазор сделать ???
Тут много чего приходит на ум после таких извращений с аргоном