Best DIY 600 Watt Amplifier Board | TAS5630
Вставка
- Опубліковано 8 вер 2024
- $2 for 10 PCBs Prototype jlcpcb.com
Hello UA-cam in This video I'm Going to Show You a quick test of TAS5630 Class D Amplifier
If you Have any Question Please Comment.
Where To Buy "Cheapest"
TAS5630 - goo.gl/a2cuQ4
Banggood
----------------------------------------------------------------------
1. TAS5630 -
2. 48V Power Supply - banggood.app.l...
3. Clamp Meter - banggood.app.l...
4. Multi-Meter - banggood.app.l...
----------------------------------------------------------------------
Amazon
----------------------------------------------------------------------
1. TAS5630 - amzn.to/2sSN4ik
2. 48V Power Supply - amzn.to/2p48gD7
----------------------------------------------------------------------
Aliexpress
----------------------------------------------------------------------
1. TAS5630 - bit.ly/2VswkNF
2. 48V Power Supply - bit.ly/2WSIjEw
----------------------------------------------------------------------
Tags
TAS5630 Class D amplifier
TAS5630 600 Watt Amplifier
Tube Pre- Amplifier
DIY Pre-Amplifier Stereo Hi-Fi Preamp Douk Audio 6N3 Vacuum Valve Tube
6N3 Tube
TAS5630+OPA1632DR+TL072 Subwoofer 600W 4ohm Mono SUB Amplifier completed board+preamplifier stereo input
DIY 600 watt amplifier
DIY car amplifier
Home Made 600 Watt Amplifier
How to convert an old computer SMPS to 600-watt amplifier
How to make a Car Amplifier
How to make a Subwoofer Amplifier
Home Made Subwoofer Amplifier
DIY Amplifier
Home Audio
Stuff I use
Camera - amzn.to/2wCT2Hb
Prime Lense - amzn.to/2eBcmMC
Main Lense - amzn.to/2wBteg0
Editing Mechine - amzn.to/2eGhIdm
Multi-Meter - goo.gl/b59PAS
Lithium Battery - goo.gl/PeytL5
Battery Status Indicator - goo.gl/Rfa6eA
PX-988 90W Soldering Iron - goo.gl/C8pNLU
Share, Support, Subscribe!!!
UA-cam: / stevewillsonkujur
Facebook: / stevewillsonkujur
Twitter: / stevewillsonk
Google Plus: plus.google.co...
To make it short: up to 100W it's ok but then the distortion kicks in.
You verified that the board worked, but you did not test it to any standard. Claimed power can only be measured by driving to clipping w/ rated power supply and measuring against a linear load (speakers are non-linear).
But u gotta admit. U will use it for speakers so by practical means its fine
very simple standard, generally used to work out power consumption. lol amps x watts its called ohms law....
you need volts -- amps to get watts he had 42.oo volts with 10.05 amps= 420 watts not closes to the 600 watts.. he should have given us the ohms of the driver plus the volts and amps of currant for the real wattage from the amp, the higher the ohms, lower the watts from the amp, lower ohms ='s higher wattage
@@carlhess512 Yes. However, in addition to needing a properly sized power supply, you also need to be able to drive it to clipping and measure the clipping point to make sure that the amp can deliver it's rated power. Just because and amp can produce 600 watts output, doesn't mean it can do so w/o clipping at that level. Proper power ratings of amps are specified below the clipping point with specified distortion amounts.
@@revolution5547 That is not how power ratings are specified. And even if you do use speakers, you still need to measure clipping / distortion to get an approximation of the specified power rating. So the evaluation is not fine. If the test is simply "
Does it work?" then fine. If the test is "Does it produce it's rated power?" then the evaluation is not fine.
Why there is no 6 channel board manufactured using this Texas Instruments chip. It is a 4 channel chip with 145 W per channel. Using two TAS5630B chip 6 channel outputs 4 x 145w (front and surround) and 2 x 300w (centre and sub-woofer) could be generated for home audio usage.
I would also like to add that im far too lazy to make such an informative video. I thank you very much for your otherwise excellent effort.
You need an oscilloscope and load resistors to measure output power.. I was so curious to see what it does 😔
err no there are many ways to measure it, input power minus thermal loss for example. Or even convert output to thermal via an element and measure thermal output.
That DSP ... can you make a video about... a DIY solution? I would like to make a custom soundstage... where 👀 I can control the Sub, Mids... and Highs.. maybe like a cross over... fader... equalizer 👀 combo thing....
Nice video bro, very profession looking, I like DSP amplifier board you feature., better if you block diagram for this how its was connected
Hi! I really love the quality of your videos 👌🤤
One question, I'm looking for a small subwoofer (something between 6 and 8" and 250 watts max) and I've no idea were to get it... Can anyone help me? Thanks!
check out, sundown audio, SA 6.5. subwoofer
Dont get sundown. Get faitalpro or b&c. if u like car audio go sundown.
2:55 seeing the audio input plug move around on the PCB is not very encouraging. Hopefully it's just the gaps between the injection molded plastic and the metal parts so that the metal tabs that matter are well soldered to the board and only the plastic shell is moving
Will a torridal transfomer feeding a capacitor rectifier bank work for voltage supply?
on this part I will chose a thicker wire gauge for better current flow 2:20
Can i use JBL CS1400WSI 1400watt Subwoofer ( Powered RMS Power 325 W ) with this amplifier
Yes
Nice 5his a pure mono, can be used for subs. Is this available for procurement if so where
Please suggest Best 2.1 Class D amplifier Board
Great review. Thanks for posting
This system can run with 12vDC supply
How to connect class d Amp with my home theatre harman kardon avr 161
I have a Marantz SR8002 that has 7 channel preamp inputs and the ones you need, preamp outputs. It does 125 watts at .01THD per channel into 8 ohms. Make no mistake it is a beast lighting up an indoor basketball court auditorium using only 4 of the channels. (and 2 300w powered subs)
Harmon Kardon is usually top end of the consumer product market.
If you really want live performance and piss off the neighbors. maybe get the police called out. You take about $4000 and go to the www.musiciansfriend.com website, and buy 4 live performance amplifiers, (Gemeni-500 or QSC, or Crown, you can also get Peavey, Yamaha and others. The Gemini seem to be the biggest bang for the buck rolling in at $220 each. You could get three amps and powered subs (2), or 4 amps and use passive subs(2) driving them with the fourth amp.
I got 7 Kustom E-Force EV12L rated at 450W continuous each. I would like to some day retro fit Electro Voice EV12L Black edition (rated 300W continuous) into those enclosures.
Does this board support 12v input, like from a soundbox battery? :)
Please make a video about that low pass filter
Are you using a single 12v to drive this amplifier? And what amperes is recommended for this amplifier? Thanks.😊
600 watts / 12v = 50Amps. That's a shit load of amps for a 12v adapter. You'd need a computer PSU that can supply that amount over a 12v rail.
Not a diy, it'a ready to use audio amp, just a few connections also not a 600w rms you did not even demo a music it was just a freq. test not enough to claim 600w needs to hear it to believe it, test it outdoor with 15" subwoofer 500w
tell that to the manufacturer who sell it as a diy amp... lol
Is 48V 10A smps enough? pls enlight me.
Its close. But if you do the math you will see that that is max 480 watts. Depends if you are going to turn up your system to use 80 watts per channel or what?
TAS5630 vs TPA3255 for sound quality?
I'm still skeptic about the true power of that Class D, 600wrms ? it should power up a huge outdoor concert so I wanna see a video using that class D on outdoor event for real to play as loud as it can, and compare it to a 600wrms - BJT power amp
I'm not that skeptical as if you ever watch big d wiz test car Amps (btw there the same thing both class D) and I've seen crazy power from really small amps. Today's technology is crazy
@@AndrewSosayes both the same, if it was in same built with same procedures, like using a tranny mosfets, but not as a chip made class D overrated -600wrms, make a video as I said to compare the power with an AC power amp Bjt- 600wrms , but without a video test it's just a gimmick overrated publicity of the product..
I need this board please working link
Your old link is not working
Please reply me
Can I connect a Mixer with it?
Can that power supply handle running 2 of the amps at the same time? Ie one for left and one for right?
mattyttv no, you’d need a 1200 watt power supply for that, it would still run them just not at full power. They would need at least 600 watts each (600x2= 1200)
Realy pleased to watch this v clip😍😍😍
Which one the best 5630 or 3255 ic
Hello! Could you or literally anyone here that knows a thing or two about em,("The D.S.P. Processor shown.") {OR ANY OTHER KIND OF D.S.P. (Circuit-Board) THAT YOU KNOW OF (FOR D.I.Y. Purposes that is) then please! please! send me a name, a type, & or the link of one of-course for me to be able to find to make a purchase... Thank you!
the links are wrong
Why did you stop making videos? Your videos are really good.
I still do makes videos
I hear a lot of hissing noise... Quantity against quality here...
I want to buy this
It isn't a 600W amp. Max. 50W with
That power supply doesn't look big enough for a 600W amp.
Hi would this power a pa speaker for all frequencies
Yes
Wow super...
cani use this with my dual 15 inch speaker box for pa . and tell me buing link
Yes
what about the other circuits
Can it be battery powered
Nice
Any links to buy DSP .
So with the amp board. Can I push both high and low frequencies? I dont want only bass
@@woetertoeter1375 oh I thought the amp had a low or high pass filter. The connection says sub so I assumed a low pass filter was involved somewhere
@@woetertoeter1375 but thanks. You answered my question
@@dariencharlton4773 A class D amplifier will have a low-pass filter anyway on many designs. Often 20k but can be lower if only for a subwoofer
How meny price
Johar
Sir .8 ohm 100w rms subwoofer support this amplifire
Rahmathullah cv no, the amplifier would be too powerful. Also the amplifier needs a 2 ohm load at minimum.
So how much for this amplifire
How much price in ( Bangladesh)
What DSP is that?
where you buy dsp
how to buy this kit
how much
How much $ all device?
We need more INFO!!!!
600w that tiny? that just amazed me
It definitely doesn't do 600. 200 watts would have flexed that subwoofer harder than what he is showing.
@@drjd2real nah dude that sub is rated for 400 watts rms. I have the sub connected to a 500watt blaupunkt amp and it handles it quite well
Home theater setting
Can you tell me the which app used in your phone to test.
Frequency Generator
Steve Willson Kujur thanks
How about, cheapest amplifier for a 500RMS/1000Peak 1ohm subwoofer? The only amps I can find that can do 1ohm are for car audio.
thasickest find anything? Couldn’t you run a higher impedance?
Your voice seems of an Indian ??
Dis is price bord
what means of kujur
It's my surname
I need this how. Much price
I'm unable to find this board on Amazon.in..please help
here you go buddy
www.parts-express.com/wondom-aa-ab31242-1x600w-class-d-audio-amplifier-board-(t-amp-technology)--320-3346
Where available dis is amplifier board. I want to this
Rms 600 ?
What is prise
Song bajake dikhavo bhai
Not TPA 5630 it's tas
Bhai iska price
Price koto amar lagbe
D
Regane pira cook ?
300
Its review amp.
Yeah
Its fake review
small caps.
its bulshet using 3 or 4 kit to amplify sound. completly nonsens.
Just because my mobile phone Audio output is not that much
more like 50 watts rms clean at best. These cheapo china amps are beyond shit and disingenuous with their power ratings. Its literally peak clipped to hell power before the amp blows at a low ohm load. Not real stable usable power aka RMS in the 4 to 8 ohm range. Doesnt matter what power supply you have, its not going to make anywhere close to half its ratings.
How much cost of amplifier
$64
That's not DIY that's bought...
R u Indian
Please get rid of that ugly bass, it hurt my ears and I had to turn down the volume. It detracts from your presentation.
What do you think you watched? (Might I ask)
Because a '600watt amp' is what his "presentation" was for/about.
So as expected he showed us a 600watt amplifier. Which is made for, OR the manufacturers "intention" for it, is to power a sub or even a pair of subwoofer.
With the byproduct (so to speak) of those things coming together being 'BASS'
So of course his subscribers and viewers are going to ask for him to "hook it up" and want to hear it "bump" And that's exactly as he did. (Rightly so!)
So in closing he did the right thing for the product he was reviewing. I didn't mean to be rude by asking what you thought you watched. I was actually curious, genuinely.
Because as I stated he did exactly as any viewer should have reasonably and rationally expected when clicking on such a video.
So common sense says his "presentation" (as you called it) was SPOT ON.
I say - WELL DONE OLD CHAP!!!
NEVER 600W !! Maybe at 2 Ohm??? Than its 300W at 4 Ohm and only 150W at 8Ohm! hahahaha!!!
is it never or is it maybe?
Its the data sheet thats says by Texas Instruments 600 mono pbld configuration. @ 2ohms
Are you indian?
Gaurav Shrivastava no. He is apache. Lol