I believe the fastest RC car in the world has only 1 motor. 2 motors doesn’t give you 2x the speed. Only takes some of the load off the other motor. #BigFacts
Hey buddy! I am going to build a dual motor AH-917 for someone and wanted to know how you got the top brace to work? I experimented with swapping out the AK-787 chassis and top brace and the servo seems to hit the top of the body using the AK-787 top brace. How did you make the servo fit under the canopy of the car shell! I appreciate your creativity!
Do you mind sharing which motor your using? Is it the 1412 6400 KV? Do you bottom out very often especially at high speeds? I’m thinking of building something very similar.
You are awesome to share this. What am awesome build idea! I thought it was a super expensive all Castle build but you saved a little money with your motor choice. That was really clever! I was injured years ago in oral surgery and my face is on fire from constant pain. I am always looking for hobbies to keep my mind occupied and not thinking about how bad my situation is. I recently found RC cars and having fun! I learn a lot from guys like you. I am building one of these and planning to build with a TP 4040 SVM but can’t calculate the best KV choice due to my lack of experience. I plan to use no more than 4S which suggest I can use the 5400?KV motor but not sure if a lower KV would be better on the ESC? I can’t afford to buy more than one motor so I have to chose correctly. I have a new Mamba 8S ESC. Which KV would you get assuming a max of 4s? Thanks buddy!
@GregoryMcGehee-ex3cl castle Cooper 4s is very powerful little esc. The xteam motor i have on dual build is rated for 6s. On speedrun challenge I change the gear to 23t and 40t mod 1 I've gotten 128-135mph. If I were to do it again I would go with 4s motor with 3500-4000kv range. The lower kv the bigger pinion you can use. The higher kv the smaller pinion. Dual build is expensive set up, 2x castle esc alone close to 300usd, end of day is worth it. Better torque, tire smoker, sound mean and not worrying about flying at high speed. Dual build center (COG) since everything is simetrically balanced.
@GregoryMcGehee-ex3cl for speedrun go with lower kv and use big pinion, better temp management. I killed 2 tp motors for maximizing the gearing. Lol for AK-917 build you don't have to pay big prize to be crusing at 100+mph just have proper gearing,suspension set up and decent electronics, and of course practice.
Thank you, sir! That is what I needed to know. I will likely build a similar dual motor as just a fun build fie hanging out with friends and use a clear body for the fun of it. What do you think of the new Rlaarlo car specifically the body shell? While it looks good, I don’t think it can be as aerodynamic as the AK-917? Some said the front appeared too high which would hurt speed running. Any thoughts? I have a carbon roller on order and was going to make a drag build using my Castle 1412 6400 KV motor for it. It won’t be spectacular but should be fun on 3s and keeping the weight down. For that reason will leave the suspension plastic parts.
Awesome, can’t wait to see all the upgrades everyone is going to do!
I've been follow the build somewhat on Facebook bro, loving it! Very nice!
Thanks man.
I believe the fastest RC car in the world has only 1 motor. 2 motors doesn’t give you 2x the speed. Only takes some of the load off the other motor. #BigFacts
Can't wait for the full send!! She's mean bro!!🤙🏾👏🏾
Yessir bud she’s a rocket running smooth Awsome build 🙏🏾💯👍🏾
Rlarrlo is loving this video for sure 😎👍
I bet they are. 😊
What a beautiful beast bro! I can’t wait for the full send!
Thanks bro
Awesome brother. Definitely has some power..
Thanks bro. I'm curious how fast this car can really go.
Amazing 😮😮😮
Hey buddy! I am going to build a dual motor AH-917 for someone and wanted to know how you got the top brace to work? I experimented with swapping out the AK-787 chassis and top brace and the servo seems to hit the top of the body using the AK-787 top brace. How did you make the servo fit under the canopy of the car shell! I appreciate your creativity!
Custom cut cf tip brace. I left stock servi where it was. Top brace gives you more room for gps,recivers perfect pass etc…
Dual mount I used for limitless dual mount off eBay
Thanks, man! Good job with that car!
Spectacular 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥☄️☄️☄️☄️☄️☄️
Love it Bro, Should be Wicked Fast...👍💪🦾👊🤛💯
Yes bro 🔥🔥🔥🔥🙏💚👊
Monster
Love it
Thanks..
🔥🔥🔥 my bro 🏆🙏💚💚👊
Nice, really nice!
Thanks for watching.
Yes!!
Just rear wheel drive? Don’t see any tire marks from the front
AWD to much torque at the rear ,front being lift up against my shoe.
Do you mind sharing which motor your using? Is it the 1412 6400 KV? Do you bottom out very often especially at high speeds? I’m thinking of building something very similar.
Sure it's Xteam 2700kv 3665 motor.
27t spur 2x 30t pinion mod 1.
My shocks all locked for speedrun.
You are awesome to share this. What am awesome build idea! I thought it was a super expensive all Castle build but you saved a little money with your motor choice. That was really clever! I was injured years ago in oral surgery and my face is on fire from constant pain. I am always looking for hobbies to keep my mind occupied and not thinking about how bad my situation is. I recently found RC cars and having fun! I learn a lot from guys like you. I am building one of these and planning to build with a TP 4040 SVM but can’t calculate the best KV choice due to my lack of experience. I plan to use no more than 4S which suggest I can use the 5400?KV motor but not sure if a lower KV would be better on the ESC? I can’t afford to buy more than one motor so I have to chose correctly. I have a new Mamba 8S ESC. Which KV would you get assuming a max of 4s? Thanks buddy!
@GregoryMcGehee-ex3cl castle Cooper 4s is very powerful little esc. The xteam motor i have on dual build is rated for 6s. On speedrun challenge I change the gear to 23t and 40t mod 1 I've gotten 128-135mph. If I were to do it again I would go with 4s motor with 3500-4000kv range. The lower kv the bigger pinion you can use. The higher kv the smaller pinion. Dual build is expensive set up, 2x castle esc alone close to 300usd, end of day is worth it. Better torque, tire smoker, sound mean and not worrying about flying at high speed. Dual build center (COG) since everything is simetrically balanced.
@GregoryMcGehee-ex3cl for speedrun go with lower kv and use big pinion, better temp management. I killed 2 tp motors for maximizing the gearing. Lol for AK-917 build you don't have to pay big prize to be crusing at 100+mph just have proper gearing,suspension set up and decent electronics, and of course practice.
Thank you, sir! That is what I needed to know. I will likely build a similar dual motor as just a fun build fie hanging out with friends and use a clear body for the fun of it. What do you think of the new Rlaarlo car specifically the body shell? While it looks good, I don’t think it can be as aerodynamic as the AK-917? Some said the front appeared too high which would hurt speed running. Any thoughts? I have a carbon roller on order and was going to make a drag build using my Castle 1412 6400 KV motor for it. It won’t be spectacular but should be fun on 3s and keeping the weight down. For that reason will leave the suspension plastic parts.
💪💪👌
Hey bud. Doug from Wisconsin the car looking fast.👍😎
Thanks.
sick dude
Thanks brother .
Sounds good bro
Hey boss can you post a link for those tires please sir? Thank you sir
www.amainhobbies.com/xceed-rc-ita-wide-rear-tirerim-carbon-black-2-35-shore-xcd101556/p591145?v=578765
Nice 👍🏾💪🏾💯
Sick! Mine arrived today. Dual motor, what motor size & lipo you're using. C'mon man, don't tease us! 😂 I got alloy BL rtr
Motor: dual Xteam 3665 2700kv
Spur: Saga 34t mod1
Pinion:30t mod 1
2x 4s ChNL black series 1500mah
Esc: 2x Castle Copperhead 4s
Thanks for watching.
Very cool 😎 you going to speedrun it?
Yes hopefully this weekend.
i just sent you an email. those driveshafts are impressive
And what? Take it somewhere to actually show it off. Any slash can do what you showed.
Read the title and no slash can do what I did on ak917.. thanks for watching 😊
@@KaniZRC my crawler burns tires
Stock up on parts. You're going to need them.
Extra cars all together
Why is that?