Microsoft Surface Pro 3 Screen Removal without breaking

Поділитися
Вставка
  • Опубліковано 23 чер 2020
  • If you are trying to learn please check out the Discord channel link below!
    Every day computer repairs for my customers
    Electronics Repair School Discord Channel
    invite.ers.repair/
    Facebook Page
    / azureuscomputers Every day computer repairs for my customers
    Electronics Repair School Discord Channel
    invite.ers.repair/
    Facebook Page
    / azureuscompu. .
  • Наука та технологія

КОМЕНТАРІ • 67

  • @bummers
    @bummers 3 роки тому +12

    You sir, are a master! I have not seen one other youtube video where a surface device's screen is removed without breaking it. Hats off to you.

  • @mikeurban3996
    @mikeurban3996 10 місяців тому +1

    I watched a couple of other videos that never mention the difficulty of the task, making it seem like a no-brainer. A new battery would be nice, but I'm not willing to risk the computer. After watching this video, I put my Surface back in the docking station and will use it from now on plugged in. End of story. Thanks so much!!

  • @jed2055
    @jed2055 Рік тому +2

    Nice job and thanks mate, I'm about to do one myself so your video is gold. Great to see a fellow Aussie do it right and no tricks.

  • @chrislutes2882
    @chrislutes2882 2 роки тому +6

    Can confirm, this is definitely possible. I popped the screen out of a SP3 for a battery replacement and it can be done without breaking it. I think the key is using a hot air rework station to put heat right on the edge of the digitizer vs a heat gun which puts a wider-area heat down on the glass. I put the SP3 face-down on my 3D printer bed and cooked at 80C for about 15 mins. Then I used a thin metal opening tool (iSesamo) to get under a corner. From there, I would advance the tool to the point I would encounter a tiny bit of resistance, stop, and apply heat to the next area until the opener moved, indicating the adhesive released on its own.
    I chased the tool with playing cars to keep the adhesive from sticking back down.took about 15 mins to use heat to release the adhesive and a follow-up test showed the screen and digitizer work perfectly afterward.
    For those wanting to do it, use a hot air rework station and don't be afraid of applying a fair amount of heat right on the edge of the glass. LET THE HEAT DO THE WORK, NOT THE PRY TOOL.

  • @AlphaBravoTech
    @AlphaBravoTech 4 роки тому +3

    I got so nervous when you started going under the digitizer and started getting under everything! Even though I read the title and know you did this job without breaking it, I was still scared!! lol

  • @ohheydarciemae1121
    @ohheydarciemae1121 3 роки тому +1

    your set up is AWESOME!

  • @Sadenki
    @Sadenki 4 роки тому +4

    Damm you have some big ball !! Iron mind.
    I always decline batteries replacement job on Surface pro because of the screen.

  • @nana0atassi
    @nana0atassi 3 роки тому +1

    Sir you are a wizard, honestly you are the only one so far I saw using a professional method to crack it open, all other videos I see them using thick metal objects and rushing around the screen then blame it on how thin it is.

  • @DDtot
    @DDtot 4 роки тому +1

    You Sir are very diligent

  • @zydawn
    @zydawn 3 роки тому +2

    nice work, been looking at doing mine , needs a service , batteries , thermal paste and a good clean, cheers.

  • @Dazerath1
    @Dazerath1 2 роки тому +1

    I used a hair dryer and Pokémon cards and got all the way around until the last corner and the glass broke haha. I think I just rushed a little bit cause I was coming up to the end. I needed to replace the whole screen anyways since it's a faulty Samsung screen on a surface pro 4, I just wanted to see if I could get it off without breaking as well and your guide was really handy thank you.

  • @daveb7999
    @daveb7999 Рік тому +1

    Whew! I have a Surface Pro 5 screen to remove next week, your video helps, thank you very much! Been watching various techniques, the common denominator is obviously patience and plenty of it. Thanks again, it's appreciated!

  • @rpicorelly
    @rpicorelly 3 роки тому +1

    patience is key no rush. that was pretty good!

  • @marcusz.8620
    @marcusz.8620 4 роки тому +1

    Fantastic job, very impressive!

  • @694634A
    @694634A 3 роки тому +1

    Great and patience job!!!

  • @mrebholz
    @mrebholz 2 роки тому +2

    That was smooth

  • @philmatthews4447
    @philmatthews4447 3 роки тому

    Looking to do this maybe in the future and you proved it can be done

  • @Dastivus
    @Dastivus 3 роки тому +4

    Bravo sir. While you were in there did you happen to look at the fans or heatsink for excessive dust? I basically use mine like a laptop and the fan is constantly running. I'm not sure if it's because the wimpy video card has to work hard to display more data to 2 additional monitors or if the system is clogged with dust. Trying to figure out the best approach to dealing with it. Cheers

  • @livelongandprosper70
    @livelongandprosper70 2 роки тому +1

    the key to this, or any other screen is patience, getting the right amount of heat to melt the glue and the right spudger is key, good job.

    • @azureuscomputerrepairs
      @azureuscomputerrepairs  2 роки тому +2

      Exactly. Different batches of glue have different melting temperatures. Start at a corner IMO and find the temperature to lift the corner. Be patient and take much time and care.

    • @azureuscomputerrepairs
      @azureuscomputerrepairs  2 роки тому +2

      Do not overheat... just enough...

  • @MrJcr656
    @MrJcr656 3 роки тому +1

    Great
    Job

  • @younostra
    @younostra 3 роки тому

    Show, muito bom parabéns
    !!!

  • @chandanbiswas3910
    @chandanbiswas3910 2 роки тому +1

    Beautiful

  • @harikumarnairelavumthitta
    @harikumarnairelavumthitta 3 роки тому

    Very good job.

  • @marcnevin2333
    @marcnevin2333 3 роки тому +1

    I have not finished watching the video but at ~3:56 when you first touched the screen it looked like the backlight of the display flicker indicating that perhaps the cables underneath where faulty. Watching the rest of the video now....

  • @JuzzyQld
    @JuzzyQld 3 роки тому

    Have you ever repaired the display port in these?
    Mine is damaged and want to know if its, once opened, easily replaceable?

  • @bl5355
    @bl5355 2 роки тому

    Which aftermarket screen did you replace it with?

  • @eevvxx80
    @eevvxx80 2 роки тому

    hi, my screen of pro 3 broke I need replacement so how I find the right one also I found in Amazon led version and oled ?

  • @markhoffman
    @markhoffman 3 роки тому

    Well, if he just wanted the data, I'd open it like a 5 year old kid opening a Christmas present.

  • @comicbookjerk
    @comicbookjerk 2 роки тому

    I really wanna replace my screen surface pro 4, but the only thing that doesn't work is the touch 😕 I don't feel like I should have to replace the whole screen just for touch, is there a way to fix it without a new screen

  • @stewpidalex
    @stewpidalex 8 місяців тому

    I really want to open mine up to replace thermal grease and SSD(been kind of slow lately and it seems like a driver issue) but all I have is a hair dryer. xD

  • @anayajones2611
    @anayajones2611 4 роки тому +1

    I have a surface 3 that has an expanding battery which is causing the screen to lift up from the frame, I want to replace the battery but I don’t want to break the screen as then I would have 2 problems. Do you have any suggestions?

  • @naruhina1021
    @naruhina1021 3 роки тому +2

    Please do a video with the opposite. My screen is coming off and it's not broken. How do I put is back on?

    • @steveod3198
      @steveod3198 3 роки тому +1

      Just fixed one like this screen was coming of because battery was swollen. More then likely need to remove screen replace battery and then reapply adhesive and set the display back down. Shouldn't be to hard with heat patience especially if screen is lifting to give you a starting point. Hardest part is getting started without it cracking

    • @naruhina1021
      @naruhina1021 3 роки тому +1

      @@steveod3198 I'm so scared to even start that process, should I just wait until it falls off. I don't think I have the skill neccessary to complete such a task.

    • @azureuscomputerrepairs
      @azureuscomputerrepairs  3 роки тому

      @@naruhina1021 Research screen adhesives... you pay for the good stuff.

  • @WPXTacoMan477
    @WPXTacoMan477 2 роки тому

    Mine was working just like so, had the heat cranked up and everything was going well, was under one corner at the start, got all the way across to the other corner just fine and the next corner broke, was being delicate as I could and nothing was being forced and it broke, dang.. just a few cracks went down diagonally across the face of the screen and then now I can’t get it up anymore without the cracks getting worse and it’s still all suck together and I don’t want pieces breaking out of the corner so I guess it’s either new screen or I send this battery back , and use it with low battery capacity or buy new

  • @jlelelr
    @jlelelr 2 роки тому

    can we just use isopropyl alcohol to weakening to glue around the screen without heating it?

    • @azureuscomputerrepairs
      @azureuscomputerrepairs  2 роки тому

      How will you dissolve the glue if you can not introduce it to the glue?

    • @jlelelr
      @jlelelr 2 роки тому

      @@azureuscomputerrepairs peeking only one corner then drop the alcohol and continue yanking little by little

  • @taramiller4989
    @taramiller4989 3 роки тому

    Would like you to show how to unclip and extract the heart drive out

  • @nikdano
    @nikdano 2 роки тому

    Sir! How much temperature and air to heat the screen?

    • @azureuscomputerrepairs
      @azureuscomputerrepairs  26 днів тому

      There is no setting. Feeling is your friend. Just enough to break the glue. Slowly. Gently.

  • @TaniaKisha
    @TaniaKisha 2 роки тому

    I tried the exactly same. I separated the display from the casing without any crack. The sad is that the LCD separated too a very tiny bit which became half screen size black hole after months.

  • @KRYSISJAG
    @KRYSISJAG 2 роки тому

    Damit I thought it was my comp ringing lol

  • @funnyvideosunlimited3832
    @funnyvideosunlimited3832 3 роки тому

    How to price display and touch

  • @johnsandwick3802
    @johnsandwick3802 2 роки тому

    Impressive.

  • @scratchercatcher6760
    @scratchercatcher6760 3 роки тому

    Well done mate. Like to you. I cracked mine in a rush once. Do you know where to buy the Genuine Screen? All from Ebay stoping working after 2-3 months due to they cheap chinese fake replacements

    • @nana0atassi
      @nana0atassi 3 роки тому

      I bought one from Ali Express 2 weeks ago, it arrived to me 2 days ago through a mail forwarding service, the quality is good, if you want it I can send you the link here

    • @scratchercatcher6760
      @scratchercatcher6760 3 роки тому

      @@nana0atassi Thanks mate. I found one on Ebay taken from genuine Surface by some master. it is working yet for about 2-3 weeks now. let's see what wil be after 3 months. It it is really taken from genuine device it shall be forwver up until you crack it, The replacement parts keeps broken after overheating in games.

  • @csr2537
    @csr2537 3 роки тому +3

    I sti broke it lol

  • @Player-1103
    @Player-1103 2 роки тому

    just cracked the screen

  • @thekawaiicookie3267
    @thekawaiicookie3267 10 місяців тому

    The charging port on my surface 3 is broken and only charges in a certain position the screen is in perfect condition I don't know why microsoft purposely designed it like this

  • @nerdicus15
    @nerdicus15 Рік тому

    I've got 5 of these devices that I need to remove the drive. Problem is I can't get it off without cracking.