AOVOPRO ES80 ELECTRIC SCOOTER HOW TO REPLACE THROTTLE

Поділитися
Вставка
  • Опубліковано 2 лют 2025

КОМЕНТАРІ • 24

  • @PaulTheSkeptic
    @PaulTheSkeptic 3 місяці тому

    It was nowhere near as easy as he made it seem but I finally got it and this helped. Thanks.

    • @xxsuperlocoxx283
      @xxsuperlocoxx283 2 місяці тому

      Where did u order the part from I did on Amazon threw the scooters company but the wire is not the same but everything else is

    • @PaulTheSkeptic
      @PaulTheSkeptic 2 місяці тому

      @@xxsuperlocoxx283 Oh, I don't know. Those wires are really tiny. You wouldn't want to do soldering and finding the right sockets for those. Is your scooter by Aovopro?

  • @ioOSmOkEdOnOo
    @ioOSmOkEdOnOo 5 місяців тому +2

    How do you get the control panel off…..it’s already removed at the start of the video?

    • @maciejklasa6783
      @maciejklasa6783 5 місяців тому +1

      Came here to ask the same question. I was watching video for a different brand (which looks very similar to AOVOPRO) and it was basically glued.

    • @AOVOPRO-ebay
      @AOVOPRO-ebay  5 місяців тому +2

      the screen cover? Use a knife to pry it open from the edges.

    • @PaulTheSkeptic
      @PaulTheSkeptic 3 місяці тому

      It's glued on. You just have to break it off, remove all the glue and glue the new one back on. If you didn't get a new one, I'd just use a little electrical tape along with some transparent packaging tape for the display. Or, just get creative. Where there's a will there's a way.

    • @PaulTheSkeptic
      @PaulTheSkeptic 3 місяці тому +2

      @@maciejklasa6783 I think the same scooter goes under about 30 different brand names. That happens sometimes.

  • @hopedreams9671
    @hopedreams9671 2 місяці тому

    What screw do i use to tighten the throttle?

    • @domizoo
      @domizoo Місяць тому

      allen key

  • @Ibrahim-r1e7c
    @Ibrahim-r1e7c 3 місяці тому

    What screwdriver is used to take of the throttle?

    • @AOVOPRO-ebay
      @AOVOPRO-ebay  3 місяці тому

      M3 screwdriver

    • @PaulTheSkeptic
      @PaulTheSkeptic 3 місяці тому

      You need a small phillips head and a set of hex wrenches.

    • @hopedreams9671
      @hopedreams9671 2 місяці тому

      @@PaulTheSkeptic what is the screw that was in the throttle

    • @PaulTheSkeptic
      @PaulTheSkeptic 2 місяці тому

      @@hopedreams9671 If memory serves, you'll need both to remove the throttle. But it's been a while since I've done it.

    • @hopedreams9671
      @hopedreams9671 2 місяці тому

      @@PaulTheSkepticcan a allen wrench work on the hex screw

  • @babypluto9066
    @babypluto9066 2 місяці тому

    That’s cool and all but where do I order a new accelerator

    • @Crazyboiijoel
      @Crazyboiijoel 2 місяці тому

      Amazon

    • @1INSXNE
      @1INSXNE Місяць тому

      If you're talking about the throttle and it broke, you can reach out to the manufacturer or the seller and they can send you a free replacement(through my experience)