Triplatt Overview

Video Chapters:
00:03 - Introduction
00:25 - Panel Overview
01:09 - Attenuation
01:43 - Inversion
02:42 - Voltage Source
03:26 - Voltage Offset
04:28 - CV Mixing
05:25 - Audio Mixing
06:16 - Doubling
06:44 - +5V Offset
07:30 - Muting
08:17 - Signal Flow
Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch. It’s a versatile and super handy utility module that will find its way into almost any patch you make!
Each input is normalled to a built-in +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch.
Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.
In addition, each channel has a “special function” switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.
Features
Triple Attenuator / Inverter / Attenuverter / Multiplier / Adder / Mixer / DC Voltage Source
Two Modes for each channel (Positive or Bipolar)
Additional “special function” for each channel
Precision 5v source normalling to all three inputs
Dual color led for monitoring each individual output
Skiff / Palette friendly
#intellijel #eurorack #modular #synthesizer

[@VictorSteiner]

Got all the juicy modules when I started with eurorack, but now I realize how much utility modules are needed. Great module!

[@simoantere7283]

Triplatt is the best!👍🏿

[@MichaelBogaMusic]

Sounds like a super cool useful module!

[@adamvolkinshtein1184]

Any intellijel module
-To the point
-Delivers + more solid features (no gimmiks)
-Serves well

[@MrRoskoPeko]

Gots to git me one of these. 👌🏻

[@HousePlant_Ambient]

I love this modular and intellijel designs. I really would love it if you guys were to come up with a 10HP Quad Triplatt. That would a steal! I have like five of these in my modular already lol

[@XiXora]

Is there a revision to Quadratt to add some of these lovely utility switches? 😅 I can't get enough Quadratts!

[@monsieurconnor]

Does this also function as three attenuverters?

[@Knasterblem]

How precise is unity gain? Can you use triplatt to transpose a sequence when the knobs are fully clock wise?

[@ScottMFR]

It's not meant to be a precision adder, so there might be some slight detuning in the neighbourhood of up to 0.04V or so. Channel 3 could work great for transposing a sequence because you can toggle the mute switch to apply a voltage offset and set the amount with the knob. If you want to keep your melodies precise it would be best to go through a quantizer afterwards.

[@KPsTboy]

This is a powerful little multitool. Is there anything that the Triatt can do but the Triplatt can't? Is there any difference in Triatt's 'Sum' vs Triplatt's 'Mix' under C?

[@ScottMFR]

No and no! Triplatt covers all the same ground as Triatt but adds cool new features with the switches.

[@THIEFSOUNDS]

magical. can i have it?

[@ScottMFR]

You can order it here right now!
intellijel.com/shop/eurorack/triplatt/

[@drtchock]

money can be exchanged for goods and services