@@asharmulla2707 Actually, it's not. (www.google.com/search?sxsrf=ALeKk02mEY2I798li3-6c0maF01rNkJX1g:1587717510793&q=grinding+wheel&tbm=isch&source=univ&client=firefox-b-d&sa=X&ved=2ahUKEwjU3u_R1IDpAhXESH0KHSgcD0sQsAR6BAgKEAE&biw=1200&bih=605 or www.google.com/search?sxsrf=ALeKk018HR9WmVeA8UeWi278ea93Nw-ZRw:1587717566017&q=grinding+disc&tbm=isch&source=univ&client=firefox-b-d&sa=X&ved=2ahUKEwj3nprs1IDpAhXqwTgGHQ-LCukQsAR6BAgJEAE&biw=1200&bih=605 I'd call that a grinding disc opportunity. Still potato, tomato. Stay cool, enjoy COVID as best you're able.
You got guts. Making an anvil is a massive undertaking, and you didn't quit. You are a rockstar in my book. Just a stick welder and an angle grinder and you made a work of art.
How do you hate somebody with that much determination? You must have at least 10 - 15 hours into just cutting the steel and a 50 pound box of welding rods. Good solid anvil, I hope it brings you fortune and holds up to many hammers.
Outstanding work and determination. So glad people like you filmed this to show others how haed this really is. My next anvil im going to make is a cast anvil.
Yep. Trial and error can be a wonderful experience building tool. I will admit that, in the beginning, i wasnt sure how he'd pull this off using scrapyard iron, a welder, and a grinder/cutter, but i cant even begin to argue with the results
This guy went through an insane amount of work to reach the finished project, I would hate to be the guy that pissed him off... Talk about determination
I can only imagine somebody talked shit about him not having an anvil, then he made this. Everybody start telling him he's a bad smith without a drill press or a bandsaw so everybody can learn how to build one.
Piss this man off and you will wake up in an elaborate entirely steel maze welded together, saw movie style. Yeah ill pass, i hit the like button, dont trap me.
Not many people can say they made an anvil piece by piece, let alone with no fancy tools just angle grinders and an arc welder. And a drill... yeah that was madness... Hats off!! Well done
And some people think humans didn't make the Pyramids in Egypt. Once a man sets his mind to doing something, he does it! You are amazing. Takes a lot of dedication to push through and do a build like this.
I can’t imagine how many hours you had in that! Or how many grinding wheels you used! Turned out awesome! Will last you the rest of your life and who ever you pass it down to! Great job
@@prime0591 please instead of talking shit maybe explain why and help the guy get better or you know do one urself and show us how to do it better if u cant do either dont talk shit
@@hugoquaresma467 so, does welding make you an emotional mess or do you have to be one first then decide to be a welder? 😂🤣 Weird, everyone I know who welds doesn't cry when someone holds a grinder wrong. They usually are the first to show them how to do it properly and motivate them to keep at it. Shitgibbon
I cannot even imagine how hard used blacksmithing to be before power tools (and even with power tools, it isn’t a walk in the park!). Anyway, fantastic video 👌👌
You did a very good job and you are a very good welder if you would be working on and welding on objects as big as your anvil or close to it. It would be good if you had an oven that would heat the work piece up to 400 degrees F before and after welding before to solve your heat sink problem after to stress relieve your welds and cuts
Hard work, inventive solutions ... Nice job! The cracks in the center of the weld (shown at 13:26 )appeared because you didn't pre-heated the thick metals when welded. As general advise, any steel at least 20 mm thick must pre-heat. Also, if is high quality steel (high C and other alloy elements), along pre-heat you could use Ni based electrodes (more expensive!) for first two layers, than continue with basics electrodes. Warning: The welds you done aren't fully penetrated, those welds will crack eventually. However, it will last a while. There is a small risks for accident if the breakdown will fragile type but normally it should be a plastic one, allowing the user will to notice the coming failure.
I have a couple of pretty ancient 12" AEG grinders in the shop - At my time of life, I don't use them for very long in the day ...they are heavy .... but great when you need a deep cut :
Awesome work!! I love your step by step explanations, including how to repair what went wrong. And a link to a better method for the multiple welds ends being extended for a full grind off end! Very well done with minimal equipment, which is how we start!! Thank you sir for an excellent video!
My Father taught me when you do not have what you want, you use what you have! That has served me well for many years and this Man is doing just that. I was not of he mind to comment on this Excellent video after reading all of the NEGATIVE comments until I found yours. Your comment about minimal equipment allowed me to speak (so to speak LOL). We all have to crawl before we can Walk! This man is taking big steps! Cheers from John, Australia.
You should have titled this "How To Make A Work Of Art From Nothing". I forbid you to EVER sell this Anvil. It MUST be passed down within your family and they must never sell it either. It is a family heirloom. Subscribed!!!
From the subject in the title I was expecting some casting. But I was wrong. The project came out really nice. I would like to know just out of curiosity how many hours of work went into the build. I bet he could find the missing 4Kg on the floor as grinding dust. Always good when someone can make there own useful tools. Keep it up.
The cracking problem was probably due to the weld cooling too fast. A way to prevent this is to preheat the area with a torch and then heating after the weld and slowly letting it cool. burying it in dry sand or ash after welding can help insulate it to slow the cooling process and relieve stress.
Different alloys cool and shrink at different rates so rapid cooling can cause cracking at their seams. That is why it is generally best to cool things gradually so the parts can normalize to the stresses they are under. Exceptions to this are hardening and differential tempering of steel for tools, parts, and such.
Old school work. Very very nice. Here's a man who knows that with a bit of effort you can make something that will last as long as this planet. Well done.
I was just amazed that you took the time to create such a wonderful anvil. I would like to suggest a bigger tree stump underneath it to elevate the anvil as an aid to your back! Less bending over. The other thing is about the weld cracks. Your solution was fine but labor intensive. If you drill a series of holes in the bad weld channel and plug weld every other hole the thermal stress will be lessened. Then come back and weld the remaining holes. The other thing is heating the entire thing up to 350 or 400 degrees f. Then proceed with the welding as normal. This preheat will also help with tempering or heat treating the anvil. Very nice work. You should have signed it!
I use to help the welder at a gold mine that I worked at weld in 3/4" wear plate into the beds of the haul trucks. I used 1/4" rod, a lot of them. He was using the wire-feed on the sides. We only had one big wire-feed, so I used the other big welder for stick, while the welder did the sides with the wire-feed. Being in that one position for hours would just kill my back.
Can’t remember the last time I saw someone with as much sheer determination as this guy to make something. Big lumps of steel and a disc grinder, and he produces an anvil. Maybe not the prettiest anvil in town, but wow! , the work put in to make it. Great job, well done!
YOU'RE BACK!!!! I'm so glad that you're making videos again! I find them to be both inspiring AND educational, as well as entertaining. I hope that you'll keep it up!
in the case an arc wielder and something producing electricity both survive. and him too. 3 points of failure man. better find an anvil if it's the apocalypse. and hope this guy is here to make another objects with it (and then there is only one point of failure). survival is made of measuring chances.
EMP is overrated. The Air Force built an EMP test rig to ensure aircraft are hardened against EMP and of course both sides had atmospheric nuke tests. The pulse trashing some of the grid doesn't mean it would kill simple vehicle electrical systems, generators, or spare parts on the shelf. Many welders use classic magneto ignition Lincoln SA series engine drive power sources. They'll still work. So will simple car and truck systems with early electronic ignitions or points. All my Harleys will run and those take Chevy inline six points and condensers. Light, simple hydro-electric systems of the sort used to power mills (and make carbide for acetylene!) will still work to provide local power even if the distribution system shits the bed. Check these folks out. They rehab small hydro plants over 100 years old. www.frenchriverland.com/
I've watched this a few times now. It's not a "how to" tutorial, but it is an awesome view of how a guy uses the tools and materials he has to make what he needs.
Anyone who viewed this video and didn't give you a thumbs up should be ashamed of themselves! You did a great job. A whole lot of work and you have the best looking welds that I have seen on UA-cam. Thanks for sharing.
It's great to see you back mate, and as usual, you've made another beautiful piece. I appreciate the work, time, and effort you put into every video you post.
Good job brother!! Why thumbs down guys? The guy did a very good job, and it’s perfectly serving him. If you are perfectionist and feel that you are better, please by all means, go away and make your own videos.
LOL well then......you tell that to the 45 machinists that work for me with over 1,000 years combined experience. These guys sharpen drill bits everyday and we work in very tight tolerances. These men sharpen all our drill bits by hand with bench grinder, properly dressed wheels and a dial caliper....so you are full of shit and a pussy.....I got guys here that can hand sharpen drill dead nuts by eye +- .005 perside....so yeah.....LOL
pretty amazing you did all that with a handheld grinder a hand drill and a welder. Im used to seeing youtubers jump on milling machines and lathes for every little thing
Being a certified welder for 20 years the one guy had it rite preheat and keep it hot alot of steel there expanding and contracting. Nice job and keep on doing your thing
That's awesome man. I was about to give up on cutting my railroad anvil because its taking so long but this clearly took you way longer so I guess I can hold out haha awesome work man
you'd be surprised I did almost the same thing with a set of forklift forks that were 4" wide and 2" thick. 10 separate cuts and I might have used only 12 or 14 discs hehe and they were harbor freight cutting discs
Anyone who has made anything by welding it together know the work this guy put in to this masterpiece. I take my hat off to you Sir it came out great !
People still impress me even in this day and age. You've certainly have some talent young man thats a fact! You made not just a work of art from scrap but created a creating device. I could tell you some pointers on the ending of cracking of welds on dissimiliar metals as you did encounter. But the fact is you do not need any advice! Seems you're doing quite well on your own. You created a great video as well as id mentioned a work of working art! Two thumbs up! Great job. Id be the 1st in line on assiting you in resolving haters issues on anything you've done in the entire video! The more or less of weight commit and all lol. That horn on the anvil can be a haters worst nightmare! Keep up the work cause in you're case, you are only going to improve! Great job in every aspect!
Nice work young man. I don't know why anyone would send any hate in your direction. Maybe because they are not able to do the thing you did with success. Sure, I would do a few things different myself but, I have been working with steel for over 4 decades. We all have to learn from our mistakes over time. Again, you are doing a fine job. Wish I could travel through time and see how you are doing in 40 years!
Great video --- so much work. You are a legend and now you have a beautiful anvil created by you own hand. More power to you and thank you for posting.
@@NKG416 the u.s.a. provided something like 450-500 thousand trucks (which is a big deal for logistics and troop movement, and every large shipment preceded every large breakout after stalingrad) but you're basically right, the defining factor in the victory in europe was the u.s.s.r.'s willingness to use millions upon millions of troops as cannon fodder. the red army beat the third reich, hands down.
This guy has the best mindset, if more wanted it like this guy instead of getting in the comments an talking shit. They might get that anvil they say is to hard to find or pay for. This guy is a maker without a doubt. I wish the generations to come had this mentality.
It is hard to fathom why he put the pieces together vertically instead of horizontally prior to welding... Seems like it could have been a narrow exterior weld to hold the piles in place...
I am impressed! I also feel a strange urge to move to your town and start selling grinding discs.
I would invest in selling welding rods too
Actually its grinding wheel not disc
@@asharmulla2707 Actually, it's not.
(www.google.com/search?sxsrf=ALeKk02mEY2I798li3-6c0maF01rNkJX1g:1587717510793&q=grinding+wheel&tbm=isch&source=univ&client=firefox-b-d&sa=X&ved=2ahUKEwjU3u_R1IDpAhXESH0KHSgcD0sQsAR6BAgKEAE&biw=1200&bih=605
or
www.google.com/search?sxsrf=ALeKk018HR9WmVeA8UeWi278ea93Nw-ZRw:1587717566017&q=grinding+disc&tbm=isch&source=univ&client=firefox-b-d&sa=X&ved=2ahUKEwj3nprs1IDpAhXqwTgGHQ-LCukQsAR6BAgJEAE&biw=1200&bih=605
I'd call that a grinding disc opportunity. Still potato, tomato. Stay cool, enjoy COVID as best you're able.
I'ma sell bandsaws and drill presses and reduce y'all to a secondary process.
@@asharmulla2707 semantic lords are everywhere.
You got guts. Making an anvil is a massive undertaking, and you didn't quit. You are a rockstar in my book.
Just a stick welder and an angle grinder and you made a work of art.
Guts for sure..making it with Railway track is even n hard enough chore..!!
Well done !!
I take my Hat off to you..!!
How do you hate somebody with that much determination? You must have at least 10 - 15 hours into just cutting the steel and a 50 pound box of welding rods. Good solid anvil, I hope it brings you fortune and holds up to many hammers.
And making a video of it too.
Jeff Womack poor guy needs a metal cutting bandsaw, from Harbor Freight tools even.
At least a few hours in drilling the hardy hole, that looked tedious.
Goddamn, out fucking standing. Hellafied work there.
Outstanding work and determination. So glad people like you filmed this to show others how haed this really is. My next anvil im going to make is a cast anvil.
This craftsman apprenticed himself to the anvil and learned much. I think it’s genius to put yourself into your tools.
Amazing way to put it! 🍻
Yep. Trial and error can be a wonderful experience building tool. I will admit that, in the beginning, i wasnt sure how he'd pull this off using scrapyard iron, a welder, and a grinder/cutter, but i cant even begin to argue with the results
This guy went through an insane amount of work to reach the finished project, I would hate to be the guy that pissed him off... Talk about determination
Yea, he'll probably mess you up really bad..
He's a SAVAGE
Wow...guess I can now get my lazy ass up and make some earrings.
I can only imagine somebody talked shit about him not having an anvil, then he made this. Everybody start telling him he's a bad smith without a drill press or a bandsaw so everybody can learn how to build one.
Piss this man off and you will wake up in an elaborate entirely steel maze welded together, saw movie style. Yeah ill pass, i hit the like button, dont trap me.
@@GapingClam lmfao 🤣 I keep a cutting torch in my wallet so I'm good
This man's patience and dedication to his work is unbelievable. Great job
Not many people can say they made an anvil piece by piece, let alone with no fancy tools just angle grinders and an arc welder. And a drill... yeah that was madness... Hats off!! Well done
My god people what is not to like . This man made something amazing and will use for ever. What have you made? Great work sir.
anthony marasco totally agree. I couldn’t Lift a 96 kg anvil! No way I would attempt to build one.
@Fester Blats No offense, but this is not a bad video, your parents "did" you wrong
@Anifco67 ok
Anifco67 why’d you watch it?
Sid Stone because you have to watch a video first to judge if it’s good or bad
And some people think humans didn't make the Pyramids in Egypt. Once a man sets his mind to doing something, he does it! You are amazing. Takes a lot of dedication to push through and do a build like this.
I can’t imagine how many hours you had in that! Or how many grinding wheels you used! Turned out awesome! Will last you the rest of your life and who ever you pass it down to! Great job
You have an INTENSE amount of patience. Great stock-removal, great welding, great anvil, great job!
Adam Horner shit welding shit anvil shit job
@@prime0591 Start a youtube channel of your own and show us how you would do it better. Dick
@@prime0591 please instead of talking shit maybe explain why and help the guy get better or you know do one urself and show us how to do it better if u cant do either dont talk shit
Prime 05 shit comment
Skills unlocked:
Patience level +1000
Welding skill +1000
Angle Grinder mastery +1000
Are you a welder? 100% no, so shut up
@@hugoquaresma467 why are you so emotional right now? Fuckin shitgibbon
@@hugoquaresma467 so, does welding make you an emotional mess or do you have to be one first then decide to be a welder? 😂🤣 Weird, everyone I know who welds doesn't cry when someone holds a grinder wrong. They usually are the first to show them how to do it properly and motivate them to keep at it. Shitgibbon
@@hugoquaresma467 salary is yearly income. So, you're saying you make 6500 euros a year? 🤣 bravo. Idiot
@@mattk6101 poor noob, you don't know what is winning money by inches estupid
Dude... You should win an award just for the sheer amount of grinding alone. Great Job bro.... Determination and resilience..
To help prevent the anvil from sucking the heat away from the welded area, you can do a preheating of the steel
I cannot even imagine how hard used blacksmithing to be before power tools (and even with power tools, it isn’t a walk in the park!). Anyway, fantastic video 👌👌
Wow...that is a beast from scrap. Well(d) done !!!! 😀
I see what you did there
and i laughed
a lot
Houtje Boom - Be Creative++++Still Scrap.
Houtje Boom - Be Creative from beast scrap to a beast anvil
lol i love how he says " its 96kg, but im going to put 100kg in the title so you can hate me"
Call it a rounding error.
Any one who takes him up on that offer...."show me the 100kg anvil you made and we will compare"
4% TAX...
You did a very good job and you are a very good welder if you would be working on and welding on objects as big as your anvil or close to it. It would be good if you had an oven that would heat the work piece up to 400 degrees F before and after welding before to solve your heat sink problem after to stress relieve your welds and cuts
It was 100kg worth of metal but he lost 4kg in the cuttings and filing.
One of the nicest anvils totally from scratch.
not totally
Hard work, inventive solutions ... Nice job!
The cracks in the center of the weld (shown at 13:26 )appeared because you didn't pre-heated the thick metals when welded. As general advise, any steel at least 20 mm thick must pre-heat. Also, if is high quality steel (high C and other alloy elements), along pre-heat you could use Ni based electrodes (more expensive!) for first two layers, than continue with basics electrodes.
Warning: The welds you done aren't fully penetrated, those welds will crack eventually. However, it will last a while. There is a small risks for accident if the breakdown will fragile type but normally it should be a plastic one, allowing the user will to notice the coming failure.
I thought he might have used Stainless rods, they do crack if prep isnt good.
I avoid using a 9" grinder whenever possible, you have left me speechless.
Angle grinder is the most dangrous tool in blacksmith works
Pussy’s
I have a couple of pretty ancient 12" AEG grinders in the shop - At my time of life, I don't use them for very long in the day ...they are heavy .... but great when you need a deep cut :
Looks like you were 4kg of welding rod short of your goal.
Great way to take away the trolls ammunition. 👍🏻👍🏻
Watching you doing the hardy hole was a lesson in perseverance.
A bench drill would have come in real handy just about there.
kudos for the drill not burning out
That hole in the cutting surface with the Grinder was a beast too
The entire project was perseverance personified.
This video was the final straw for convincing myself on getting a cutting torch this man perseverance is beyond words
Awesome work!! I love your step by step explanations, including how to repair what went wrong. And a link to a better method for the multiple welds ends being extended for a full grind off end! Very well done with minimal equipment, which is how we start!! Thank you sir for an excellent video!
My Father taught me when you do not have what you want, you use what you have! That has served me well for many years and this Man is doing just that. I was not of he mind to comment on this Excellent video after reading all of the NEGATIVE comments until I found yours. Your comment about minimal equipment allowed me to speak (so to speak LOL). We all have to crawl before we can Walk! This man is taking big steps! Cheers from John, Australia.
The amount of work you put into an amazing product is impeccable.
Speechless ..
But also , INSPIRED !
Thanking you 🙏🏻!
You should have titled this "How To Make A Work Of Art From Nothing".
I forbid you to EVER sell this Anvil. It MUST be passed down within your family and they must never sell it either. It is a family heirloom. Subscribed!!!
What he said!
Ditto!
AMEN to that. Fabulous
I know that's right
Yeah... How many people besides an anvil manufacturer, or maybe the anvil planet guy can say they've done this?
A lot of work brother but a job well done. It must be very satisfying to work your metal on an anvil you made yourself from scrap steel!
Good job. Thanks for your patience with the build, I'm sure it took a long time.
From the subject in the title I was expecting some casting. But I was wrong. The project came out really nice.
I would like to know just out of curiosity how many hours of work went into the build. I bet he could find the missing
4Kg on the floor as grinding dust. Always good when someone can make there own useful tools.
Keep it up.
Super skills. Its always so entertaining and relaxing to sit and watch a craftsman.
The cracking problem was probably due to the weld cooling too fast. A way to prevent this is to preheat the area with a torch and then heating after the weld and slowly letting it cool. burying it in dry sand or ash after welding can help insulate it to slow the cooling process and relieve stress.
Make sure your welding surfaces are CLEAN and pristine too ... any dirt, oil, pitting, scale, etc can reduce the quality of the welds.
Well he did say that was what caused the crack in the video
I thought he said that the cause of the cracking was different alloys, not too fast cooling
Different alloys cool and shrink at different rates so rapid cooling can cause cracking at their seams. That is why it is generally best to cool things gradually so the parts can normalize to the stresses they are under. Exceptions to this are hardening and differential tempering of steel for tools, parts, and such.
its also helps to pre-heat thick material before heating as well.
Damn man, you must have some patience to do that hardy hole on 60mm metal with a drill bit. The anvil turned out bloody nice!
I strongly recommend that you put on a dust mask next time when you use a lot of grinding, this is for your own health.
Furthermore, a nice project
Old school work. Very very nice. Here's a man who knows that with a bit of effort you can make something that will last as long as this planet. Well done.
I was just amazed that you took the time to create such a wonderful anvil. I would like to suggest a bigger tree stump underneath it to elevate the anvil as an aid to your back! Less bending over. The other thing is about the weld cracks. Your solution was fine but labor intensive. If you drill a series of holes in the bad weld channel and plug weld every other hole the thermal stress will be lessened. Then come back and weld the remaining holes. The other thing is heating the entire thing up to 350 or 400 degrees f. Then proceed with the welding as normal. This preheat will also help with tempering or heat treating the anvil. Very nice work. You should have signed it!
Structurally I see absolutely no problems with your Anvil very well done but the number of rods you went through good Lord son. Good build!!
I use to help the welder at a gold mine that I worked at weld in 3/4" wear plate into the beds of the haul trucks. I used 1/4" rod, a lot of them. He was using the wire-feed on the sides. We only had one big wire-feed, so I used the other big welder for stick, while the welder did the sides with the wire-feed. Being in that one position for hours would just kill my back.
You have fantastic angle grinder skills, and the resulting anvil looks awesome. Great job.
Oh yeah your sense of humour is spot on.
It's a Piece of Art Work Itself.. Pre Heating the two different metals before welding I believe will help with cracking..
Great Job!!
With few tools and a lot of determination and you built a damn nice anvil. Good job Mate.
Can’t remember the last time I saw someone with as much sheer determination as this guy to make something.
Big lumps of steel and a disc grinder, and he produces an anvil. Maybe not the prettiest anvil in town, but wow! , the work put in to make it. Great job, well done!
Dear friend after many years l have seen like this working hard powerful lron man like you l was just like you keep it up God bless you
YOU'RE BACK!!!! I'm so glad that you're making videos again! I find them to be both inspiring AND educational, as well as entertaining. I hope that you'll keep it up!
Talented guy for sure. I enjoyed watching the video. I love anvils.
Guys like you will be worth their weight in gold after the Apocalypse
Yeah, he could be called the post-apocalyptic survivor...
Word on that!
in the case an arc wielder and something producing electricity both survive. and him too.
3 points of failure man. better find an anvil if it's the apocalypse. and hope this guy is here to make another objects with it (and then there is only one point of failure).
survival is made of measuring chances.
If the grid goes, say EMP, we would be back to forge welding again. Anvils would still work but welders and grinders would collect dust.
EMP is overrated. The Air Force built an EMP test rig to ensure aircraft are hardened against EMP and of course both sides had atmospheric nuke tests. The pulse trashing some of the grid doesn't mean it would kill simple vehicle electrical systems, generators, or spare parts on the shelf. Many welders use classic magneto ignition Lincoln SA series engine drive power sources. They'll still work. So will simple car and truck systems with early electronic ignitions or points. All my Harleys will run and those take Chevy inline six points and condensers. Light, simple hydro-electric systems of the sort used to power mills (and make carbide for acetylene!) will still work to provide local power even if the distribution system shits the bed. Check these folks out. They rehab small hydro plants over 100 years old. www.frenchriverland.com/
I've watched this a few times now. It's not a "how to" tutorial, but it is an awesome view of how a guy uses the tools and materials he has to make what he needs.
Anyone who viewed this video and didn't give you a thumbs up should be ashamed of themselves! You did a great job. A whole lot of work and you have the best looking welds that I have seen on UA-cam. Thanks for sharing.
It's great to see you back mate, and as usual, you've made another beautiful piece. I appreciate the work, time, and effort you put into every video you post.
Geez that's a heap of work. I was sweating just watching
That anvil is no joke, good job man!
I can appreciate a DIY project, but this guy straight up took it to a new level
Great job! Nothing more satisfying than making you own things! Be proud of that!
Great job. a Nice functional anvil to do some real work on. It shows what you can achieve with some perseverence. Well done!
Ha ha ha only 96 kg. I hate you . Nice job mate 👍
How anyone could give you a thumbs down, behooves me.
If only there were more young men like you in this world.
May our redeemer bless your life.
Good job brother!!
Why thumbs down guys?
The guy did a very good job, and it’s perfectly serving him.
If you are perfectionist and feel that you are better, please by all means, go away and make your own videos.
You created a fantastic anvil. Your work was wonderful to watch. Thank you.
If you look up the definition of Tenacity there's a picture of this guy. holy crap. Good job
Hand sharpening drill bits is a useful skill when you have that many holes to make.
Sharpening bits is easy
Sharpening them accurately is not easy.
yes it is....I been sharping drill bits for decades
Baloney. Precision drill sharpening cannot be achieved by hand. Hand sharpened drills always show high degree of TRO.
LOL well then......you tell that to the 45 machinists that work for me with over 1,000 years combined experience. These guys sharpen drill bits everyday and we work in very tight tolerances. These men sharpen all our drill bits by hand with bench grinder, properly dressed wheels and a dial caliper....so you are full of shit and a pussy.....I got guys here that can hand sharpen drill dead nuts by eye +- .005 perside....so yeah.....LOL
Amazing what you've done without a Band saw, Drill press or other Shop tools!
I just want to comment one thing to this man..
No matters what result's look like, He's harder than those steel.
Salute 🙏
⭐⭐⭐⭐⭐
You're a man of incredible skills and indomitable will. You will do anything you set out to do. Respect!
Awesome build man. I thoroughly enjoyed watching you make that. I don’t know how anyone could give you a thumbs down 💪🏻💪🏻💪🏻💪🏻💪🏻
Great work sir, the end product looked fantastic.
pretty amazing you did all that with a handheld grinder a hand drill and a welder. Im used to seeing youtubers jump on milling machines and lathes for every little thing
One of the only people who actually have decent welds on their anvil build
that welding helmet tip for grinding is such a good idea THANK YOU! my safety goggles never fit over my glasses properly... this is a great help.
Grinding disks are also known to shatter and lodge into the face so a full face mask is mandatory
@@Lumens1 indeed i take safety much more seriously since i got a small piece in my eye
This is a lot of very hard work , but looks fantastic, well done.
Being a certified welder for 20 years the one guy had it rite preheat and keep it hot alot of steel there expanding and contracting. Nice job and keep on doing your thing
Great job man, looks great! Now, if you could make me one of those, that'd be greeaaaat. And I'ma need that at the price of... on the house.
this guy wanted this anvil real bad to commit to all this labor. thumbs up to you
Turned out better than I expected, really impressed by your ability, if you can make an anvil, you can make anything. Go to it.
Is it safe to assume that majority of the cost came form the welding rods? Because I'm estimating that.... 20% of the build was weld bead. At most.
The sound off was extremely solid says alot about your welds good stuff
Anglegrinder master. hand down!
most people don't know how hart it actually is to handle an angle grinder like that for such extended periods of time. even more so a 9 inch one
Absolutely. A lot of skill, strength, and endurance.
This guys amazing but he should invest in an oxy-acetylene cutting torch
Wow, your grinder got a real workout. Great job on this anvil build. This anvil should serve you for a long time. Awesome!
I would say it's definitely " road runner" approved ! Coyote said he'll try the anvil at the nearest cannon ! Lol. Very nice job 👍
Awesome video man, I admire your tenacity
draggngmac386 I agree. Couldn't we all learn for this hopeful young man. Wow !
15:12
you'll hurt your back and knees if you continue working like this. Rise the anvil up & stay safe :)
nice project
I was pretty much wide eyed and shaking my head the whole video mumbling "how in the..."
Holy hell man, the amount of work that must have gone into this is extraordinary - and the result is fabulous. Surprising even! Well done! Bravo!
it's easier to buy than to spend so much time and effort --- thank you for your enthusiasm !!
That's awesome man. I was about to give up on cutting my railroad anvil because its taking so long but this clearly took you way longer so I guess I can hold out haha awesome work man
@@SHGVM I did. I went through about 20 grinding discs but I got it done haha
Great work, but for all the cutting discs you must have burned through, you could have afforded a decent oxy-acetelene cutting rig.
For steel that thick? I think a metal cutting bandsaw would probably be more appropriate.
@@Mistraker I believe he is referring to cost effectiveness. Bandsaw would be the greatest, just more expensive than the oxy torch or discs
you'd be surprised I did almost the same thing with a set of forklift forks that were 4" wide and 2" thick. 10 separate cuts and I might have used only 12 or 14 discs hehe and they were harbor freight cutting discs
Ryan Taylor my thoughts exactly
Or just bought an anvil.....
BRILLIANT! what an achievement-Your electricity bill must be high though
Anyone who has made anything by welding it together know the work this guy put in to this masterpiece. I take my hat off to you Sir it came out great !
Very nice .
With patience like yours you must be a fisherman too . Great work !
wow, so nice when a so hard work turn out so well. Congrats mate.
People still impress me even in this day and age. You've certainly have some talent young man thats a fact! You made not just a work of art from scrap but created a creating device. I could tell you some pointers on the ending of cracking of welds on dissimiliar metals as you did encounter. But the fact is you do not need any advice! Seems you're doing quite well on your own. You created a great video as well as id mentioned a work of working art! Two thumbs up! Great job. Id be the 1st in line on assiting you in resolving haters issues on anything you've done in the entire video! The more or less of weight commit and all lol. That horn on the anvil can be a haters worst nightmare! Keep up the work cause in you're case, you are only going to improve! Great job in every aspect!
Well said Cantell -- Epic effort.
Wonder how many grinder disks he went through to make this anvil???
I think 2 to 3 per cut
Nice work young man. I don't know why anyone would send any hate in your direction. Maybe because they are not able to do the thing you did with success. Sure, I would do a few things different myself but, I have been working with steel for over 4 decades. We all have to learn from our mistakes over time. Again, you are doing a fine job. Wish I could travel through time and see how you are doing in 40 years!
Great video --- so much work. You are a legend and now you have a beautiful anvil created by you own hand. More power to you and thank you for posting.
Determination - that's how Russia beat the Germans.
Well lets be honest the weather defeated Germany. Nothing against the Russian people. Their government is shit though.
It was the Russian winter
@W Winterheart if i remember correctly the counter attack from operation barbarossa was entirely soviet union vs german
Well, he's croatian
@@NKG416 the u.s.a. provided something like 450-500 thousand trucks (which is a big deal for logistics and troop movement, and every large shipment preceded every large breakout after stalingrad) but you're basically right, the defining factor in the victory in europe was the u.s.s.r.'s willingness to use millions upon millions of troops as cannon fodder. the red army beat the third reich, hands down.
The anvil was there already in the steel. You only had to free them.
Cheerio from Germany.
Whats 4kg between an Anvil and his Hammer, awesome skills with Grinder, welder and to finish off a hammer on the finished piece. thanks for sharing.
This guy has the best mindset, if more wanted it like this guy instead of getting in the comments an talking shit. They might get that anvil they say is to hard to find or pay for. This guy is a maker without a doubt. I wish the generations to come had this mentality.
I have watched many Anvil making videos, but this guy went the extra mile, I believe this is the Troya of Anvils, my goodness. 👍
I love it! Determined dude!!
You should have just chucked down a metal plate and made the whole anvil out of weld, like a 3D printer!!!
AussieMatt I have a friend who made a 24" tree out of stick in welding school. Wish I had pictures, it was incredibly detailed
And there's that TIG tornado sculpture someone did recently.
BWAHAHAHA!
It is hard to fathom why he put the pieces together vertically instead of horizontally prior to welding... Seems like it could have been a narrow exterior weld to hold the piles in place...
The amount of time , effort, steel, and electrodes used must be more cost than buying a used anvil. They are not expensive, no one uses them anymore.
This guy MIGHT like the angle grinder (maybe)
Still an awesome work btw, definitely deserves a lot more likes
I love the attitude and determination. I have to say I wish I had seen you preheat the entire anvil before welding.
Congratulations, very good job, as said before pre heat, post heat..... it's a learning curve and you are on the right track. God bless
Bravo, brother!