One of the greatest technical advice for balance and almost nobody speaks about it is to use an oil balance/ level to do the adjustments on the gimbal you have to do it on a balanced surface to get the least amount of pressure on the motors and get the smoothest experience on the gimbal
This is one of the best setup videos for the Wheebill S. Your tip about the quick release plate is invaluable. The inbuilt quick release is so frustrating. Your solution is much better. Thank you.
for all the people only switching between the weebill and handheld: The Weebils base plate already comes with a quick release mechanism. Somehow it´s barely covered in all those reviews, but the little screw and silver pin at the front end of your base plate is actually letting you take your cam off and on in seconds without rebalancing!
Correct but it does not work properly. You will not be able to switch between other accessories with zhiyun's baseplate release system. There is nothing quick about that system.
@@PeterMakholm yeah well, that's why I said for all the people only switching between weebill and handheld. saved me lots of time already and a little money for the extra gadget as well.
You seriously are in the master class and my prediction is that you are the next Peter McKinnon because you are the only one who fully discloses what you are talking about and sharing with the facts on how too....Any details on the 2020 E-learning workshop..???
You have produced a clear, and very helpful instruction video. By the way I bought the Agimbalgear L grip because of your other video on the Weebill S. Thanks.
Thanks for the video, Peter! Just received the Weebill S as a birthday present and it's my first time ever owning a gimbal. Following your settings and going to see how things turn out with my A6300.
Thank you very much Peter Makholm, nicely detailed. One other question, when the gimbal goes to sleep, how do you wake it up without having to turn it off and on again?
I'm glad I subscribed to your channel, great tips, thx! On the transmitter, the password is in the instructions. Also, the instructions says that the HDMI is optional but I can't make it work without it so it does not seem to be "optional" I ordered the cable so now waiting on it. Thx again!
Her Soul Vacation yeah that is correct. You won't be able to use the transmitter without the hdmi cable. It will work as soon as you receive the cable.
Once balanced in the upright position, I found the gimbal was not quite balanced in the underslung position. I rebalanced it in that position and it did not seem to upset the upright balance.
I literally got my Weebill S yesterday and this video was very helpful, good job Peter I'll be looking at your other videos to learn more with this gimbal. Has anyone got a link for a similar quick release in the UK? I hate the built in option.
Very helpful video. Thanks man! 👏 One question: Should I recalibrate the gimbal every time after turning it off and on? Because on shooting days like weddings I can’t leave the gimbal on all the time.
Hi Peter, I've just received my weebill S and I'm having a lot of trouble getting it to work. I'm using a Fuji XT3 and have tried both the 10-24 & 18-55 zooms. The issue is that once I've balanced the camera - no movement on any axis, the camera stays nice & still - the pan follow mode drifts to one side and then the camera tilts downwards on its own. Also in lock mode the camera won't seem to lock and moves all over the place. I've calibrated it a few times, auto tuned, rebalanced it so many times now but I'm still having issues. I also updated the FW to 2.02. If you could give me some tips or advice on what I might be doing wrong I'd really appreciate it. Your videos are very informative and I've been sat here watching them over & over trying to figure out what I've done wrong!! Thanks!
hello, i bought this for my nikon d5300 and non of the supplied cord fit my camera. Can you tell me which cord i need to hook this gimbal to my nikon d5300? thanks
@@billem16 what firmware are you in ? I suggest you find the facebook group. No one is talking about the problems that the gimbal has been having here on UA-cam.
Hi Peter, This video was of great help to me. This is not how some of the other videos have said to balance the pan axis. I did it the way you said and it seems to be working way better. The only thing i'm wondering is sometimes if I move in a complete circle the camera will completely turn around and face me. I was curious if it's normal or if i'm doing something wrong?
David's Real Estate Photography great to hear mate. I have never discovered that problem. If you send me video of it I can tell you if it is normal or not. You can add me on FB.
Great content! Im about to purchase it but wanted to know if there were any extra batteries I can buy that would work perfectly as a backup for weddings?
Thanks for this tutorial! Do you have any suggestions for a replacement for the baseplate? The piece I'm referring to is the longer one beneath the camera that you mount the quick release plate to.
Hi Peter, thanks for your videos. I like to put an external screen to see better, but not in the camera, I like to put in the gimbal, how you can put? what's that you use for that? thanks
I hope you're still taking questions. I have to use the riser when I shoot with my a6400. The problem is that it will not remain tightened no matter how tight it is initially. Any ideas about how to fix this? Thanks
Hey, do you know how to use the record button via the joystick on the gimbal, but without charging the Sony A73? I only want to use the batteries power for the gimbal. Best
I got that quick release plate, but it's impossible to balance with the sony a7iii + tamron 28-75 2,8F .. it sucks, but thats life I guess. Whitout the quick release plate I can balance the gimbal under 60 seconds, but it would be nice to put the camera on my manfrotto befree advanced live tripod without the struggle to change plate everytime. ( I got a smallrig and the follow focus MAX mounted aswell )
Hey Peter, thank you for the video. Weebil arrived yesterday, and I am taking my time so I don’t throw it thru the window when trying to balance. Quick question. What release base and plate are you using for the quick release? I also hate the one supplied.
Hi Does anyone's gimbal have Axis Lock problem. It's perfectly balanced, work for some minute and beeep sound Axis Lock on the display. It's brand new, so dissapointed😢
Hi dear, i’ve a question for you, i’ve weebel s and i want to acquire the plate for quick release showed in your video you can send me a link in amazin? Thanks a lot
Sorry a bit late here, but would the Manfrotto 323 work in place of your suggested quick release? Sorry quite new to all this and your recommended little guy seems out of production. I'm in EU, maybe just not available here.
Hi! Peter I have got my weebill S yesterday andI have troubled with Quick release plate set up. My quick release plate is Manforotto 200pl and it is stuck with the edge of the slide key of gimbal. Can I know how to solve this problem? I am your fan. Always watch your videos! Thanks Mate.
Hi There I am carrying zhiyun weebill gimbal creator pack but in menu button camera option is not available it's seeing only motor then wheel then joystick then calibrat then angel and last is about, can you please help me ? why camera option is not available, moreover if I am doing any mistake the please guide and correct me. Thanks
Hello Peter, very good videos!! One question. If I set the Motor settings directly in the gimbal at custom and click SAVE. Is custom automatically activated? Thanks and greetings from germany Marco
No it does not. You should check out the falcam quick release plate. It is the one I use today on all of my gear. The best Gimbal Quick Release Plate ever. ua-cam.com/video/A-UW5eJl-PU/v-deo.html
@@calenaproductions763 I don't understand why you can't ballance it. I can easily ballance the gh5 with 10-25mm and I have seen others ballance it with the sigma 18-35mm + speedbooster.
@@PeterMakholm I'm able to balance the pan axis but the tilt is what I'm having trouble with. No matter where I move it the camera is always front heavy.
No worries man... the video that helped me was a guy with a GoPro on his head, giving us that first person of every thing .... is there anyway you could post a video of canon m50 set up to gimbal. Not the balancing part but being plugged in and what not
I'm so freaking tired of watching video after video where they claim that when you point out it up and loosen that screw in the corner, you can "adjust" it. They NEVER freaking show how it's being adjusted or what they are doing. You just see hands doing stuff and it makes no sense. I loosen that screw and NOTHING happens. Nothing moves, there's nothing to adjust, it's just all locked in place with a loose screw in the corner. Damn I'm off to watch another hundred videos until somebody finally explains this.
Hey Peter! How are you? I have a question. Does your weebill s vibrate the moment a rock band starts playing? But when it is silent it moves very well. I have that problem but I haven't been able to solve it. I hope you have some advice I can follow. Thank you
No. I have shot couple of live events and I haven't had any issues with it. Loud music shouldn't effect the him as performance. You should send it back.
@@PeterMakholm I'll try the new update, as it's horrible to be in filming and it won't work as expected. I have a canon m50 and a sigma 30mm and I do not think it exceeds the weight supported. If it does not work I will follow your advice. Thanks a lot. Sorry for my English, I had to use google translator 😝
Hello mate, i'm new at your channel you do good work here. Can you tell me if can i have one plate for lab s and my manfrotto monopod? i have mvmxpro500 monopod
Hi Peter, love your videos. Thanks indeed for your great job! Just a question. There are two videos where you tallk about the Weebill S settings. This one and this, more recent (ua-cam.com/video/XeIhHKg2P8A/v-deo.html). In both videos you adjust the Motor and Speed Follow settings in a different ways. Since I use the same setup you're using in this video (GH5 + Leica 10-25mm), which kind of Motor and Speed Follow settings are the best in your opinion? Thanks in advance!
Is no one gonna talk about that cinematic in the beginning of the dude busting his knee?!?! 😂
Thank you 😭 Been going crazy trying to balance the pan axis and your tutorial was the only one that made it make sense to me.
One of the greatest technical advice for balance and almost nobody speaks about it is to use an oil balance/ level to do the adjustments on the gimbal you have to do it on a balanced surface to get the least amount of pressure on the motors and get the smoothest experience on the gimbal
This is one of the best setup videos for the Wheebill S.
Your tip about the quick release plate is invaluable.
The inbuilt quick release is so frustrating. Your solution is much better.
Thank you.
You are welcome mate.
Can you pls post a link for that quick release plate you used in this video bro?
for all the people only switching between the weebill and handheld: The Weebils base plate already comes with a quick release mechanism. Somehow it´s barely covered in all those reviews, but the little screw and silver pin at the front end of your base plate is actually letting you take your cam off and on in seconds without rebalancing!
Correct but it does not work properly. You will not be able to switch between other accessories with zhiyun's baseplate release system. There is nothing quick about that system.
@@PeterMakholm yeah well, that's why I said for all the people only switching between weebill and handheld. saved me lots of time already and a little money for the extra gadget as well.
You seriously are in the master class and my prediction is that you are the next Peter McKinnon because you are the only one who fully discloses what you are talking about and sharing with the facts on how too....Any details on the 2020 E-learning workshop..???
michaelauknz thank you very much. The workshop will be available from April.
Very nice of you to share your custom settings. I definitely will try them out. Thank you!!!
DaMaxchi yes. Try them and fine-tune until you find your preferred settings.
Super easy to balance it with this guide 👍
WOW GREAT VDO! i have already viewed about 10 VDO's on the Weebill S and this is the only one that is done correctly.
Thanks. for the support.
thanks for sharing and now i will buy quick plate release for the tips
JUST GOT THIS GIMBAL TODAY....AWESOME VIDEO, THANKS FOR THE TIPS BROTHA!!!!!!!!!!!!!
You have produced a clear, and very helpful instruction video. By the way I bought the Agimbalgear L grip because of your other video on the Weebill S. Thanks.
Manny F. Thanks mate. Hope you find the handle as great as I do.
Cool thx for the easy to follow setup guide 😎🤙
Ralf you are welcome mate
@@PeterMakholm Just received my quick release plates you recommended, bought two of 'em. They're great indeed 👍.
@@Ralfscho Yeah it just makes it super fast to get the gimbal setup.
Thanks for the tips and sharing. Best Weebill tutorials out there.
Julian UK thanks mate. Your support appreciated.
Nice intro man. i ordered mine last day. Im super excited 😁
Ended up picking up this gimbal today after watching some of your reviews, but did that dude really mess up his leg?
Hey Peter, so another Koege citizen owns a Weebill S. Bought it as a xmas present for meself :-) Cant wait to use it.
Thanks for the video, Peter! Just received the Weebill S as a birthday present and it's my first time ever owning a gimbal. Following your settings and going to see how things turn out with my A6300.
This has got to be one of the most difficult tutorials ever you are too far away and your terms are repetitive it took too long to set this up
I've just set up my weebill s for the first time and it was breeze thanks to your video!
Sweet mate. Glad it helped!
Thank you very much Peter Makholm, nicely detailed. One other question, when the gimbal goes to sleep, how do you wake it up without having to turn it off and on again?
press and hold the pow button for about one second.
Thanks for the tutorial. The quick release plate is great.
The Fresh Mind Family thanks, yes if you haven't added it to your gimbal yet I can recommend it.
Is the quick release plate third party
thank you so much.. i seriuosly thought I got wrong threads for those baseplate screws.. u saved me.
Thank you Peter, great video since I'm thinking of getting this gimbal.
Gene Moretti you are welcome. Just uploaded a new video. Comparing the weebill s with the AK 2000S
UR VIDEO IS AMAZING GREAT EDITING!!!!
Thanks mate, appreciate it.
@@PeterMakholm ua-cam.com/video/IINTIebkcuA/v-deo.html
That's a great video! Thanks a ton Peter. Very helpful !
I'm glad I subscribed to your channel, great tips, thx! On the transmitter, the password is in the instructions. Also, the instructions says that the HDMI is optional but I can't make it work without it so it does not seem to be "optional" I ordered the cable so now waiting on it. Thx again!
Her Soul Vacation yeah that is correct. You won't be able to use the transmitter without the hdmi cable. It will work as soon as you receive the cable.
Once balanced in the upright position, I found the gimbal was not quite balanced in the underslung position. I rebalanced it in that position and it did not seem to upset the upright balance.
Sen tam bir HARİKASIN!
nah this video is goated thanks bro
Thanks for the great video. I have a question 🤔. With which camera does this (Weebill S) work without any problems?
Here is how you setup your weebill S gimbal and get it perfectly balanced.
Awesome! Thank you so much for this video!! :)
Always a pleasure mate.
great video. Could you do a walk throug video of the settings.
I will do that in a future video.
I literally got my Weebill S yesterday and this video was very helpful, good job Peter I'll be looking at your other videos to learn more with this gimbal. Has anyone got a link for a similar quick release in the UK? I hate the built in option.
That bare clamp (as seen at 1.47), will it accept any Manfrotto based plate or I need to use the plate provided by Zhiyun?
You can use a standard manfroto baseplate.
Very helpful video. Thanks man! 👏
One question: Should I recalibrate the gimbal every time after turning it off and on?
Because on shooting days like weddings I can’t leave the gimbal on all the time.
Thank you for your good video.
Hi Peter, I've just received my weebill S and I'm having a lot of trouble getting it to work. I'm using a Fuji XT3 and have tried both the 10-24 & 18-55 zooms. The issue is that once I've balanced the camera - no movement on any axis, the camera stays nice & still - the pan follow mode drifts to one side and then the camera tilts downwards on its own. Also in lock mode the camera won't seem to lock and moves all over the place. I've calibrated it a few times, auto tuned, rebalanced it so many times now but I'm still having issues. I also updated the FW to 2.02. If you could give me some tips or advice on what I might be doing wrong I'd really appreciate it. Your videos are very informative and I've been sat here watching them over & over trying to figure out what I've done wrong!!
Thanks!
Hey. Shoot me am email with a video of the issues you have.
peter@thegimbalacademy.com
Very nice
hello, i bought this for my nikon d5300 and non of the supplied cord fit my camera. Can you tell me which cord i need to hook this gimbal to my nikon d5300? thanks
Interesting! Thanks for sharing!
Always a pleasure to add value.
After I calibrated and all that jazz, it still seems like there is a lean to the side. How do we fix that?
thats amazing congrats on the 1k subs. yes i do have questions about the weebill S. does your footage wooble with the gimbal?
LETS REVIEW thanks mate. Yes, I sometimes have this issue, but it is only with wide-angle lenses or if I forget to turn off IBIS.
I cant get mine to stop wobbling. have you figured this out?? Even with basic straight forward push in shots, nothing fancy
@@billem16 what firmware are you in ?
I suggest you find the facebook group. No one is talking about the problems that the gimbal has been having here on UA-cam.
LETS REVIEW 1.95. Yes I just requested to join it and it’s pending
Bill Emmrich hi, I don't have that issue. What lens are you using. If you got IBIS, turn it off. And try to autotune.
Hi Peter great tutorial thank you...witch quick release you have?
thanks mate. this is the one.
amzn.to/39s3x3a
Is it just me???.... or are yhe screws hard as hack to get in???..... mo one is saying go to the far in and screw it in.... wow
I’m stuck at screwing In the base plate screw to attach my rig. What am I missing? I can’t get the screen in at all!!
Hi Peter, This video was of great help to me. This is not how some of the other videos have said to balance the pan axis. I did it the way you said and it seems to be working way better. The only thing i'm wondering is sometimes if I move in a complete circle the camera will completely turn around and face me. I was curious if it's normal or if i'm doing something wrong?
David's Real Estate Photography great to hear mate. I have never discovered that problem. If you send me video of it I can tell you if it is normal or not. You can add me on FB.
@@PeterMakholm Thank You...I just did.
what is the reason off camera base plate? i can use my a6400 without it. i only use extension plate. am i doing it wrong?
Great content! Im about to purchase it but wanted to know if there were any extra batteries I can buy that would work perfectly as a backup for weddings?
Thanks for this tutorial! Do you have any suggestions for a replacement for the baseplate? The piece I'm referring to is the longer one beneath the camera that you mount the quick release plate to.
Hi Peter, thanks for your videos. I like to put an external screen to see better, but not in the camera, I like to put in the gimbal, how you can put? what's that you use for that? thanks
A BIG THANKS TO YOU MAN. YOUR EXPLANATION WAS VERY SIMPLE AND EASY TO UNDERSTAND. THX MUCH
I hope you're still taking questions. I have to use the riser when I shoot with my a6400. The problem is that it will not remain tightened no matter how tight it is initially. Any ideas about how to fix this? Thanks
i hav problem after balance then on gimble camera little bit down back side why ?
Great video, where can I find the link for custom quick release plate in the UK? or what is the name of the custom quick release plate please?
Hey Peter Great video. Quick question, where did you get the quick release for your handles! Looks awesome, thanks!
The quick release kit is form zhiyun. you can get them on amazon
Hello peter , thanks for this great video .
Can you please put the link of the plate
I need to find a base plate for my wee bill s, can someone send me a link to where I can purchase. Thank you
Great video peter, love the coin thing. How did the athelete do. is he allright.
Lifestyle By Fornebuporten he is alright. Just a minor hit, he is up and running again today.
Hey, do you know how to use the record button via the joystick on the gimbal, but without charging the Sony A73? I only want to use the batteries power for the gimbal. Best
Will that quick release plate work with the Peak Design system? thanks!!!
Just thinking about Ifootage seastar quick release...would it be very bulky for gimbals?
I got that quick release plate, but it's impossible to balance with the sony a7iii + tamron 28-75 2,8F .. it sucks, but thats life I guess. Whitout the quick release plate I can balance the gimbal under 60 seconds, but it would be nice to put the camera on my manfrotto befree advanced live tripod without the struggle to change plate everytime. ( I got a smallrig and the follow focus MAX mounted aswell )
you should be able to ballance that setup with the quickrelease plate.
Hey Peter, thank you for the video. Weebil arrived yesterday, and I am taking my time so I don’t throw it thru the window when trying to balance. Quick question. What release base and plate are you using for the quick release? I also hate the one supplied.
Yes, the quick release i use is thei one. amzn.to/39s3x3a
Hi
Does anyone's gimbal have Axis Lock problem. It's perfectly balanced, work for some minute and beeep sound Axis Lock on the display. It's brand new, so dissapointed😢
Hi dear, i’ve a question for you, i’ve weebel s and i want to acquire the plate for quick release showed in your video you can send me a link in amazin? Thanks a lot
Hi, they don't make the exact same any more. but this one is the one that comes closest to it. amzn.to/3c9VFab
@@PeterMakholm thanks a lot dear i will order that
Sorry a bit late here, but would the Manfrotto 323 work in place of your suggested quick release? Sorry quite new to all this and your recommended little guy seems out of production. I'm in EU, maybe just not available here.
Also thanks for this and all your videos. The best I've found for gimbals so far!
Hi! Peter
I have got my weebill S yesterday andI have troubled with Quick release plate set up.
My quick release plate is Manforotto 200pl and it is stuck with the edge of the slide key of gimbal.
Can I know how to solve this problem? I am your fan. Always watch your videos! Thanks Mate.
Hi, it is hard to know what is wrong, but could you send me a picture or video over FB. Then I can se what the problem migt be.
Thanks you! I just added your facebook and will send it right away.
Hi There I am carrying zhiyun weebill gimbal creator pack but in menu button camera option is not available it's seeing only motor then wheel then joystick then calibrat then angel and last is about, can you please help me ? why camera option is not available, moreover if I am doing any mistake the please guide and correct me. Thanks
You may upgrade the firmware via computer to try.
Hello Peter, very good videos!! One question. If I set the Motor settings directly in the gimbal at custom and click SAVE. Is custom automatically activated?
Thanks and greetings from germany Marco
Yes, correct. They will be there until you change them or autotune.
Hey man.. does this gimbal connects and works with Sony zve10 ? Please reply :)
hey Peter what are the red dots on the camera
Do you think if you added the battery grip to the GH5 it would work?
It will be to high. The weight is not a problem you will have a hight issue. My S1H is too high. Its 114mm high. You will need the crane 3 lab.
I like your titles/graphics. Is there a preset that I could get? Thanks
Just a question here. Isit normal that the gimbal vibrating if there is no camera on it?
Yes mate. Never turn on your gimbal without a camera on.
SUPER!!! Your tutorial is the best i ever seen !
Thanks for your support mate.
thx man!
may I know what tripod do you use cuz the base plate from quick release plate is too small for my tripod..
Thanks
My camera doesn't tilt backwards when I adjust the tilt axis, what am I doing wrong?
Your camera should be able to stay in any position when balanced correctly.
My screws don’t even fit and I don’t know what to do
Hi sir does the Weebill S come with lens support
Does that quick release thing come with the gimbal?
No it does not. You should check out the falcam quick release plate. It is the one I use today on all of my gear.
The best Gimbal Quick Release Plate ever.
ua-cam.com/video/A-UW5eJl-PU/v-deo.html
@@PeterMakholm thanks a lot
If you're lense is too heavy is there another way to balance? Will I need a new balance plate?
You could use some counter weights what camera and lens combo are you using.
@@PeterMakholm Panasonic GH5 w/ rokinon lenses
@@calenaproductions763 I don't understand why you can't ballance it. I can easily ballance the gh5 with 10-25mm and I have seen others ballance it with the sigma 18-35mm + speedbooster.
@@PeterMakholm I'm able to balance the pan axis but the tilt is what I'm having trouble with. No matter where I move it the camera is always front heavy.
Hola Peter... Podrias pasar el Link de Amazon del modelo que muetras en el video de Plate Quick Release? Saludos desde Buenos Aires - Argentina
Hi here is the quick release plate link. amzn.to/389hiT1
how does it live up to the battery grip ? will it balance
No it will be to high, if we are talking any camera same size as a gh5.
Needed close up shots of where screws go. FAIL
You are right. I should have put that in there.
No worries man... the video that helped me was a guy with a GoPro on his head, giving us that first person of every thing .... is there anyway you could post a video of canon m50 set up to gimbal. Not the balancing part but being plugged in and what not
I'm so freaking tired of watching video after video where they claim that when you point out it up and loosen that screw in the corner, you can "adjust" it.
They NEVER freaking show how it's being adjusted or what they are doing. You just see hands doing stuff and it makes no sense.
I loosen that screw and NOTHING happens. Nothing moves, there's nothing to adjust, it's just all locked in place with a loose screw in the corner.
Damn I'm off to watch another hundred videos until somebody finally explains this.
Hey Peter! How are you? I have a question. Does your weebill s vibrate the moment a rock band starts playing? But when it is silent it moves very well. I have that problem but I haven't been able to solve it. I hope you have some advice I can follow. Thank you
No. I have shot couple of live events and I haven't had any issues with it. Loud music shouldn't effect the him as performance. You should send it back.
@@PeterMakholm I'll try the new update, as it's horrible to be in filming and it won't work as expected. I have a canon m50 and a sigma 30mm and I do not think it exceeds the weight supported. If it does not work I will follow your advice. Thanks a lot. Sorry for my English, I had to use google translator 😝
Hello mate, i'm new at your channel you do good work here.
Can you tell me if can i have one plate for lab s and my manfrotto monopod? i have mvmxpro500 monopod
Thank you for the setup Peter Makholmckinnon :)
You are welcome mate. Love the name combo.
Is the quick release plate Arca Swiss?
Bertus Heggi hi. No it is this one: amzn.to/39s3x3a
@@PeterMakholm OK thanks 👌🏼👍🏼
I want to ask, zhiyun transmount quick release setup kit, i want to buy, buy one or two ? For one gimbal weebill s
You'll need 2 because you'll need the mounting part for each top and bottom.
Love your videos but that background music/drone is brutal.
Thanks, Yeah heard it before so i find a new track for ny next video.
You have to buy two for one gimbal. I cover this question in this video. ua-cam.com/video/IxK587QTJFk/v-deo.html
Will arca Swiss work with this?
Cons29 the arca Swiss is a bit big. But would proberly work. I use this one here. amzn.to/35m7zrM
BG sound forced me to close video
u got 2k now!!
ZJ HK yeah. Thanks mate.
@@PeterMakholm ua-cam.com/video/ndIYuHDK5kk/v-deo.html
Any chance u can help me with my weebill setting?
that music is a big distraction. good instructions, horrible music choice. I don't understand why music Is even needed..
Hi Peter, love your videos. Thanks indeed for your great job! Just a question. There are two videos where you tallk about the Weebill S settings. This one and this, more recent (ua-cam.com/video/XeIhHKg2P8A/v-deo.html). In both videos you adjust the Motor and Speed Follow settings in a different ways. Since I use the same setup you're using in this video (GH5 + Leica 10-25mm), which kind of Motor and Speed Follow settings are the best in your opinion? Thanks in advance!