I noticed nobody mentions draining the coolant before hand,plus its easier if you take off the oil filter also..my hands are to big to reach the nuts underneath around the filter haha
Hell Yea... She's all Good! Much Lov Homie keep up the great wrk on you're Lude an paintin, Dippin ect. on customers rides an droppin them Awesome Vidz. as well
@@treybedipping1734 thanks! Did you change the manifold stud? Or no need? And I put the skunks 2 manifold and I think i have a massive vaccum leak did you have the same problem?
trey man i need help, 94 prelude h22a, i cant find where the sensor is that transfers over to the skunk2 throttle body on top my old tb didnt have one, its the one on the throttle body with the hole in the middle with that o ring you put on and the 2 screws on the sides
Don't know if you still respond to these or not. I'm looking to get this manifold for my H22a4 in my 97 prelude. I noticed on the video the throttle body now sits back a bit further than stock? Did you have to modify your intake piping to be able to fit it to the new setup?
Very cool video. I always wanted to do a skunk2 manifold install on a H22A4 but unfortunately I'm still running a stock ECU. So I'll know I'll run into some issues with the EGR valve sensor.
Looks Bitchin!!! What fuel rail did you use Bro? I have a 91 Accord Coupe F20B swapped with a Skunk2 intake manifold but not sure on what fuel rail would fit that manifold... Thanks dude!
I installed a different intake manifold and i am at a lost to the part of " reconnect all plugs and wires" I didnt have the same plugs on the new manifold. Im wondering if it is something that needs to be spliced and taped off or just let the plugs hang?
Depending on what manifold you got there will be a few plugs you will no longer use....such as egr and possibly 2 others but yes i would reccomend using zip ties to keep them out of the way
Rasta Safari... Honda Prelude 5th gens. are great cars or the 4th gens. but Skyline GTR R34's, r32's & r33's are my most favorite. if ya can afford one of them... but ya can't go wrong with a Honda Prelude 5th gen. & 4th gen. Bro
Hi, what is the size compared to the original intake? I have an ek hb h22 and I want to install skunk intake but I don't know if it collided with the firewall
Did you delete that black box that was bolted to the manifold? (tank vacuum it's called on honda) asking because I want to remove it on mine just don't know if I should?
nice video man. i have f20b and my iacv is from f22b sohc with adapter plate and 2 wires connection. planning to buy skunk2 intake manifold same color as you had now. do i need to use my old plate adapter for iacv or not? i am not sure why my iacv have a adapter plate. but when i google it says convert from 3 wires to 2 wires. how about your iacv is that 2 wires?
hey bro nice upgrade, are you planning to dyno it again? do a short video of it if you do, and compare any gains u might have gotten from now and when u did the initial turbo setup 😁 or just send me a msg if u not going to waist time of a video😁
What up bro great video I just installed the same manifold on a 99 prelude but having issues on where the hoses go, do you have any videos or links you can send me? Greatly appreciate it
Alot of the vacuum lines will need to be capped off your really only gonna use the break booster line and cruise control (if you have it) the rest pretty much get capped off
Im only using 3 ports one for the blow off valve, one for the boost gauge, and the last one is to the fuel pressure regulator...the rest are blocked off
Alright but what if I want to keep my old harness? Cause I just need a MAP/TPS connectors but I can’t find where the wires are located. Is there a way I can just wire my MAP and TPS another way?
Trey Be Dipping how do I retain my old harness? the car didn’t have a MAP/TPS sensor connector wires or anything so I’m lost. Do you suggest a new harness or what?
Trey Be Dipping I actually was having idling issues and I went to clean my IACV which was on the back of my skunk2 manifold and I but it bac together and now it’s a crank and no start
Yes it's a full size I paid 300 for it I'd let it go for 175 your boy with the rhd might want it he knows where I live he almost bought my lude for his girl
@@treybedipping1734 it's not horrible dont get me wrong bro! Honestly I thought for years it was a top brand because everyone used it. But everyone used it because it was cheap I guess. I watched another video that said it was just a little off in quality control. Mainly on stuff like valves and stuff. They will have a lot of skuffs in the metals. But for a manifold you caint go wrong. Hey bro about how much have you spent building your car. Iam going to try and put 4 to 5 thousand up to build one. Do you think I can build one decent this way.
Nice too see f and h series in the spotlight, keep it up.
Jimmy's Brother trying bro and will do
Trey Be Dipping do you have a single belt crank pulley on that f20b?
Jimmy's Brother yezzir
@@treybedipping1734 that my Bro on youtube.
@@treybedipping1734 Bro what up Lol.
I noticed nobody mentions draining the coolant before hand,plus its easier if you take off the oil filter also..my hands are to big to reach the nuts underneath around the filter haha
If u install this intake do u have to get a new ecu tune? If Stock
@@virginiarobles2376 no tune,but I reccomend getting the skunk2 map sensor with it also
That's new manifold looks dope! Keep up the awesome videos
Nick Lopez will do and thanks bro
Ported p13 manifold is the king for H and F series
preludeF20Bking yes sir
I see thanks for the info
Would u happen to know the difference between them if there both ported ?
Hell Yea... She's all Good! Much Lov Homie keep up the great wrk on you're Lude an paintin, Dippin ect. on customers rides an droppin them Awesome Vidz. as well
Nice and thorough bro. Really liked this video. Great job fam.
I really like the fact this channel came up in my suggestions. Quality content bro keep doing ur thing!
Thanks bro and will do
U KEEP ME EDUCATED AND U ALWAYS SMILE THAT'S LET'S ME KNOW U LOVE WHAT'S U DO 👍
Looking good Bro.... How's the tuning coming alone ?
differentgroove1 i got tuned yesterday bro got it all on cam
Yo bro nice video! What gasket manifold you put? Oem?
The thermal ones are the best ones to use
@@treybedipping1734 thanks! Did you change the manifold stud? Or no need? And I put the skunks 2 manifold and I think i have a massive vaccum leak did you have the same problem?
trey man i need help, 94 prelude h22a, i cant find where the sensor is that transfers over to the skunk2 throttle body on top my old tb didnt have one, its the one on the throttle body with the hole in the middle with that o ring you put on and the 2 screws on the sides
Don't know if you still respond to these or not. I'm looking to get this manifold for my H22a4 in my 97 prelude. I noticed on the video the throttle body now sits back a bit further than stock? Did you have to modify your intake piping to be able to fit it to the new setup?
It's not a big enough difference to have to change anything
Love your channel man..what should I do with my 95 accord 5speed f22b2?
Antb2393 lots you can do whats your goal?
My car wont start after installing this 😢😢
Double check you have the map sensor and tps sensors plugged in the correct spot. The plugs are identical
these videos are useful, thanks for sharing
Anytime
Very cool video.
I always wanted to do a skunk2 manifold install on a H22A4 but unfortunately I'm still running a stock ECU.
So I'll know I'll run into some issues with the EGR valve sensor.
Looks Bitchin!!! What fuel rail did you use Bro? I have a 91 Accord Coupe F20B swapped with a Skunk2 intake manifold but not sure on what fuel rail would fit that manifold... Thanks dude!
Obx bro
Great vid man! Quick question, do you know how to install the power steering pump on the h22?
Yea bro it not hard just a few steps
Trey Be Dipping can you make a video lol or guide me in the right direction ?
Manifold looking good on the lude man! If youre having weird throttle response be sure to check the adjustment of the tps. Measure it by voltmeter
T Delmonte i got it re tuned and it fixed it.
Is this Manifold go in to my h22a7 Accord Type R ? Cool Video Dude !
Yes sir
I installed a different intake manifold and i am at a lost to the part of " reconnect all plugs and wires" I didnt have the same plugs on the new manifold. Im wondering if it is something that needs to be spliced and taped off or just let the plugs hang?
Depending on what manifold you got there will be a few plugs you will no longer use....such as egr and possibly 2 others but yes i would reccomend using zip ties to keep them out of the way
Yo trey what do you think is a good first car ✊✊💯
Rasta Safari a honda prelude my guy..... it was my first car.
Trey Be Dipping ight thanx
Rasta Safari... Honda Prelude 5th gens. are great cars or the 4th gens. but Skyline GTR R34's, r32's & r33's are my most favorite. if ya can afford one of them... but ya can't go wrong with a Honda Prelude 5th gen. & 4th gen. Bro
Johnmicheals Burnett thanks bro
HAH that intro. I just got one and I did the same exact shit OOOOOoooooo yeahhhhhhhhh
How tight is the clearance with the same manifold and f20b in a 95 accord
Not 100% sure bro. I know it's gonna be a tight fit but you should definitely be able to fit it in there
Hi, what is the size compared to the original intake? I have an ek hb h22 and I want to install skunk intake but I don't know if it collided with the firewall
I dont know much about the fitment of these in a civic. I think you may need hood risers because the h2b swap in a ek make the motor lean forward more
Trey, looks good nice work. What’s the artist/ song for the vaporwave sounding music during the install?
Thanks bro and its a beat i made a few years back.
Did you delete that black box that was bolted to the manifold? (tank vacuum it's called on honda) asking because I want to remove it on mine just don't know if I should?
Yea I delete all of that
@@treybedipping1734 I need to remove/delete mine one of the nips broke off. Could you help me out need information please 🙏
@@miltonmartinez1985 should only be a 10 mil or 2 holding it on the the vacuum line going to it....just go buy some vacuum caps and block it off
@@treybedipping1734 ok thanks
nice video man. i have f20b and my iacv is from f22b sohc with adapter plate and 2 wires connection.
planning to buy skunk2 intake manifold same color as you had now. do i need to use my old plate adapter for iacv or not? i am not sure why my iacv have a adapter plate. but when i google it says convert from 3 wires to 2 wires. how about your iacv is that 2 wires?
Yea the three wire is ob2 and 2 wires is obd1 im not sure about the adapter plate.
ok but how about the fitment can i still use the plate to skunk2 manifold? sorry man need to ask to make it clear :)
@@darbats im not sure to be honest.you may not have to use it at all.
last Q your iacv is 2 wires?
hello, I like your car. where did you get the cover for the distributor? custom made? nice idea. will steal :D
I’ve looked at this manifold; is it larger? Like throttle body wise? Or the ports bigger?
Manifold doesnt come with a throttle body you buy that separately but is a 70mm opening but can be ported to 74mm which is what i did.
Trey Be Dipping oh ok, so there’s enough material on the actual opening on the inner diameter to be opened up?
@@gradycanty6432 yea but 74mm is the limit
This might be a longshot but what air control valve are you using?
Air control valve?
Bro what's the carbon piece called on the engine ?????????
hey bro nice upgrade, are you planning to dyno it again? do a short video of it if you do, and compare any gains u might have gotten from now and when u did the initial turbo setup 😁 or just send me a msg if u not going to waist time of a video😁
DARRYN MULLER just got re tuned today😈 its coming soon.
whoop whoop awsome! how was it driving after u did the swap? before the tune? still drivable?
DARRYN MULLER you'll have to wait and see bro
DARRYN MULLER yea just had stay out of boost.
But what about the egr I'm lost on that when I put my manifold on the car really stinks like emissions
There is no egr when you swap to the skunk 2 manifold.
@@treybedipping1734 I know bitdoes your car smell really bad when u drive?
@@dennisdapp7405 no
Just let me know I work at auto mc2 in sterling va interested swing by to look at it still brand new in box
josh hall is it a full rad im not sure it will fit with my set up. How much?
Over here spying again LOL nice little karate kick :)
Lmaooo you know it wuuutawwwwww lol
Did you use your stock fuel rail on the performance intake manifold?
Nah bro i used a obx fuel rail
What up bro great video I just installed the same manifold on a 99 prelude but having issues on where the hoses go, do you have any videos or links you can send me? Greatly appreciate it
Alot of the vacuum lines will need to be capped off your really only gonna use the break booster line and cruise control (if you have it) the rest pretty much get capped off
@@treybedipping1734 do you know why I lost power now? After the install when I put it in gear no power
@CrazyDad double check you map sensor plug as well as tps and egr. They all have the same style plug. You may have switched them
@@treybedipping1734 how did you get the plug to the back of the manifold to the iacv? On the stock it was located in the front
@@rolandphang you'll have to extend the wires
Idk if you’ve answered this before but what made you go wit f20b and not a h22a?
serg Campos f20b is a better motor for boost if your sticking with a stock block.
Trey Be Dipping appropriated bro
hello. always love your vids. can you send me link to buy the manifold. thanks!
oh and do i need a new tb also?
Can i run this off a stock ecu? Or would it cause the engine to run rough?
It will run but in a perfect world you would want to get chipped ecu and get it tuned to really benefit 100%
Nice video can you do a breakdown video on what you did with all the vacuum lines
Im only using 3 ports one for the blow off valve, one for the boost gauge, and the last one is to the fuel pressure regulator...the rest are blocked off
Can you do a video on where the IAC VALVES HOOKS UP
Its pretty simple it loops from the thermostat to throttle body to the iac valve
Trey Be Dipping thanks bro
Did use a thermal gasket or just a normal paper gasket
Paper gasket
@@treybedipping1734 why didn't you use the thermal gasket
Hey would you be interested in a brand new mishimoto radiator I have no use for it anymore I live in nova
josh hall yea bro hit me up on instagram @bagged_trey5
I dont have Instagram but ur buddy with the mugen prelude has my number my name is josh he should remember me I'm the one that had the red prelude
josh hall you on facebook?
Trey Be Dipping... he must be talkin about Rey Huh
@@treybedipping1734 Bro going to put. Instagram on my Phone.
what's the name of those Wheels you got
Ohhhhhhhhhhhh Yeaaaaaaaa you tryna go fast fast bruhhh #WET
rodney suggs you already know lol #nomoreLswillbetaken
Sounds good bro
O love how fresh those black rachets look but I would hate to drop a set of those at night 😣
I know right 🤣
Hi bro how many Percent HP do hinh get for skunk intake manifold?
If you port the inlet to 74mm like i did about 20-30hp with a tune on boost not sure about N/A
Hey blessings. Do u get ur Parts online or stores.need prelude parts.from jamaica
Online bro
@@treybedipping1734 can u recommend the site.site name
@@whytevideoproduction i usually know what part im looking for and i just order from who ever has it. Amazon ebay
@@treybedipping1734 kool and bless up yourself.love ur show
What up yo where did you find the 3" exhaust system
rude lude it straight down pipe and its custom bro
What have you heard about the f22 with h23 head.
Ben Greyson thats pretty much what the f20b is bro iron block with a vtec head.
@@treybedipping1734 totally different stroke. 95mm stroke in a f22.
What's that neo chrome on the cold intake
Blow off valve
Damn that shit definitely cost great video bro
Rutledgem thanks bro
My boy didn’t spill a drop of coolant or gas how the fuck did you do that
Ancient prelude secret lol
How did you route your coolant line
Directly to the thermostat housing
Did your skunk2 only have one hole in the back
Or do you have any photos im completely lost on mine
@@realpowermotion6235 it should have come with andapter and a block off plate.
The adapter shoulf have had 2 ports
I dont think i received the block off plate idk
Beast! 🤯👊
Thanks bro
Where can I find an engine harness for the f20b/h22?
Best bet is a junkyard pull it from a prelude 97-2000 or rywire sell harnesses as well
Trey Be Dipping thank you! I been looking everywhere for one. This my first project car I’m working on. I didn’t know the 97-2000 would fit tho.
@@TerrioTheGreat the only difference is you will have to re wire the injectors to obd1 connectors and few others like egr and there may be one more
Alright but what if I want to keep my old harness? Cause I just need a MAP/TPS connectors but I can’t find where the wires are located. Is there a way I can just wire my MAP and TPS another way?
Trey Be Dipping how do I retain my old harness? the car didn’t have a MAP/TPS sensor connector wires or anything so I’m lost. Do you suggest a new harness or what?
And the egr???
Skunk 2 manifold has no egr
@@treybedipping1734 so that mean i going to have my check engine on?
@@reyesbish look into getting a chipped p28 with a h22 baseman
What did you do with the egr?
Sinister 661 on the skunk2 there is no egr its completly deleted.
Did you just plug the hole on the valve cover?
Sinister 661 thats not the egr and no im still running that line from the valve cover to the manifold.
Oh my bad, so that one way valve right of the valve cover still gets used? Just hooks into the sk2 mani?
Sinister 661 yes sir
is this from amazon bro
They sell skunk 2 manifolds everywhere bro
Trey Be Dipping im in new zealand hardly any here lol
Ay so my car won’t start after I took my intake manifold off
You put a new intake manifold on with a new gasket?
Trey Be Dipping I actually was having idling issues and I went to clean my IACV which was on the back of my skunk2 manifold and I but it bac together and now it’s a crank and no start
Niicee
Coolant left the chat
Yes it's a full size I paid 300 for it I'd let it go for 175 your boy with the rhd might want it he knows where I live he almost bought my lude for his girl
josh hall cool ill get your info from lou
my boi trey how did i just find your insta lol followed you jesses_95_vtec check me out!
Skunk is actully entry leval Chinese junk.
Always thought it was euro r spec manifold replacement. Thats why i got it.
@@treybedipping1734 it's not horrible dont get me wrong bro! Honestly I thought for years it was a top brand because everyone used it. But everyone used it because it was cheap I guess. I watched another video that said it was just a little off in quality control. Mainly on stuff like valves and stuff. They will have a lot of skuffs in the metals. But for a manifold you caint go wrong. Hey bro about how much have you spent building your car. Iam going to try and put 4 to 5 thousand up to build one. Do you think I can build one decent this way.
@@danielbeavers8701 yea bro im prob around that same range right now